301-320 of 500
IT750 - Nsi

The Polaris It-750 Multi-Tap Dual-Side Entry Connector Features 2 Ports Sized For 750 to 250 MCM Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Dual Rated For Use With Copper or Aluminum Cables. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, In

  • MFR Part #: IT-750
  • Total Availability: 166
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 4 ($413.40) ·
IT750 - Nsi Industries

Total Availability: In Stock

PT0600 - Nsi

Offset Pin Terminal 600 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

  • MFR Part #: PTO-600
  • Total Availability: 11
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($315.16) ·
PT0600 - Nsi Industries

Total Availability: In Stock

WW732YL - Nsi

Warriorwrap WW-732-Yl Yellow Vinyl Professional-Quality Electrical Tape Is Strong Enough For Demanding Environments and Highly Resistant to Abrasion and Corrosion. This Tape Is 7MIL Thick, 66FT Long and Has A Max Temperature Rating Of 220 Degrees F. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

  • MFR Part #: WW-732-YL
  • Total Availability: 101
WW732YL - Nsi Industries

Total Availability: In Stock

800T4 - Nsi

4 Port Stacked Lug 800 - 300 MCM Stacked Lugs Are Large Size Set Screw Connectors With Wire Holes Stacked On Top Of Each Other to Minimize The Width Of The Connector. Made Of 6061T-6 Aluminum Alloy. Tin Plated For Low Contact Resistance. Suitable For Use With Both Copper and Aluminum Conductors. Rated 600 Volts (2000V Max. Per UL486B). UL486A/B Listed. Temperature Rating 90 Degrees C. Mounting Hole Spacing Is Nema Standard Of 1.75".

  • MFR Part #: 800T-4
  • Total Availability: 64
800T4 - Nsi Industries

Total Availability: In Stock

IPLD3508 - Nsi

The Polaris IPLD350-8 Multi-Tap Dual-Sided Entry Black Connector Features 8 Ports Sized For 350 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable

  • MFR Part #: IPLD350-8
  • Total Availability: 66
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($332.24) ·
IPLD3508 - Nsi Industries

Total Availability: In Stock

IPLD6005 - Nsi

The Polaris IPLD600-5 Multi-Tap Dual-Sided Entry Connector Features 5 Ports Sized For 600 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays

  • MFR Part #: IPLD600-5
  • Total Availability: 33
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($296.98) ·
IPLD6005 - Nsi Industries

Total Availability: In Stock

N3 - Nsi

Copper Split Bolt Connector 3 Awg Copper Split Bolt Connectors Are High-Strength Solderless Service Connectors Made Of High-Copper Alloy For Copper and Copperweld Wires. Type For Two Maximum Wire Sizes.

  • MFR Part #: N-3
  • Total Availability: 141
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($315.67) ·
N3 - Nsi Industries

Total Availability: In Stock

WW7320R - Nsi

Warriorwrap WW-732-or Orange Vinyl Professional-Quality Electrical Tape Is Strong Enough For Demanding Environments and Highly Resistant to Abrasion and Corrosion. This Tape Is 7MIL Thick, 66FT Long and Has A Max Temperature Rating Of 220 Degrees F. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

  • MFR Part #: WW-732-OR
  • Total Availability: 188
WW7320R - Nsi Industries

Total Availability: In Stock

SC8 - Nsi

Standardbarrel TINNEDCOPPERSPLICE8 Awg Standard Barrel Tinned Coppersplices Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

  • MFR Part #: SC-8
  • Total Availability: 934
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 100 ($392.71) ·
SC8 - Nsi Industries

Total Availability: In Stock

SPM5L - Nsi

Service Post Connector, #4 Awg (Stranded) Conductor Size, #2 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 1 Conductor, +90 °C Operating Temperature, 1-1/8 In (Stud) Overall Length, 600 V Ac, 0.17 LB/Ea

  • MFR Part #: SPM-5L
  • Nacogdoches Availability: 22
  • Total Availability: 95
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 12 ($618.41) ·
SPM5L - Nsi Industries

Available now at Nacogdoches: In Stock

Total Availability: In Stock

SPM7L - Nsi

Service Post Connector, #1 Awg (Solid);2/0 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 1 Conductor, +90 °C Operating Temperature, 1-1/4 In (Stud) Overall Length, 600 V Ac, 2.76 LB/Ea

  • MFR Part #: SPM-7L
  • Nacogdoches Availability: 8
  • Total Availability: 34
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($586.44) ·
SPM7L - Nsi Industries

Available now at Nacogdoches: In Stock

Total Availability: In Stock

WW716GY - Nsi

Warriorwrap WW-716-Gy Grey Vinyl General Use Electrical Tape Is Strong Enough For Professional Environments and Gets The Job Done Right The First Time, Every Time. This Tape Is 7MIL Thick, 60FT Long and Has A Max Temperature Rating Of 176 Degrees. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

  • MFR Part #: WW-716-GY
  • Total Availability: 114
WW716GY - Nsi Industries

Total Availability: In Stock

ALP2P2 - Nsi

Power Distribution Block (2) 350 MCM-6 Awg Primary (2) 350 MCM-6 Awg Secondary Power Distribution Blocks Are Made Of High Strength, High-Conductivity Aluminum Alloy and Are Mounted In A High-Strength Glass-Filled Polyester Base. Each Block Can Stand Alone or Combine With Other Blocks to Form A Multi-Block Set.

  • MFR Part #: AL-P2-P2
  • Total Availability: 15
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($273.21) ·
ALP2P2 - Nsi Industries

Total Availability: In Stock

GL50048 - Nsi

1 Hole Short Barrel Copper Compression Lug W/ Peep Hole 500 MCM - 1/2" Bolt Short Barrel Copper Compression Lugs With Peep Hole Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

  • MFR Part #: GL50048
  • Total Availability: 52
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($146.93) ·
GL50048 - Nsi Industries

Total Availability: In Stock

HB809 - Nsi

Hex Bolt, Silicon Bronze Material, 2-1/2 In Length, 1/2 In - 13 Thread Size, 1/2 In Diameter, 0.16 LB

  • MFR Part #: HB809
  • Total Availability: 2
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 25 ($431.98) ·
HB809 - Nsi Industries

Total Availability: In Stock

IPLD2508 - Polaris

The Polaris IPLD250-8 Multi-Tap Dual-Sided Entry Black Connector Features 8 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable

  • MFR Part #: IPLD250-8
  • Total Availability: 34
  • Manufacturer: Polaris
  • Find: Similar Items
  • Pkg Sizes: 3 ($407.85) ·
IPLD2508 - Nsi Industries

Total Availability: In Stock

IPLD50010 - Nsi

The Polaris IPLD500-10 Multi-Tap Dual-Sided Entry Connector Features 10 Ports Sized For 500 MCM - 4 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Tra

  • MFR Part #: IPLD500-10
  • Total Availability: 44
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 1 ($270.58) ·
IPLD50010 - Nsi Industries

Total Availability: In Stock

IPLD7504 - Nsi

Double Sided Entry Insulated Multi-Tap Connector, 250 MCM Conductor Size, 750 MCM Conductor Size, Insulated, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, 4 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 6.38 In Overall Length, 600 V, 1.87 LB/Ea

  • MFR Part #: IPLD750-4
  • Total Availability: 82
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($392.08) ·
IPLD7504 - Nsi Industries

Total Availability: In Stock

L1N - Nsi

2 Hole Long Barrel Copper Compression Lug 1 Awg - 1/2" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. Allows Easy Inspection Of The Termination to Assure Complete Cable Insertion. Tin-Plated to Provide Corrosion and Low Contact Resistance. Marked With Die Index and Color Coded. Listed For 35KV Maximum When Properly Installed. Rated 600V. Culus 486A/B Listed. UL467 Listed On Sizes 6 Awg - 3/0 Awg. Temperature Rating 90 Degrees C.

  • MFR Part #: L1N
  • Total Availability: 152
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($817.65) ·
L1N - Nsi Industries

Total Availability: In Stock

L4N - Nsi

2 Hole Long Barrel Copper Compression Lug 4 Awg - 1/2" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. Allows Easy Inspection Of The Termination to Assure Complete Cable Insertion. Tin-Plated to Provide Corrosion and Low Contact Resistance. Marked With Die Index and Color Coded. Listed For 35KV Maximum When Properly Installed. Rated 600V. Culus 486A/B Listed. UL467 Listed On Sizes 6 Awg - 3/0 Awg. Temperature Rating 90 Degrees C.

  • MFR Part #: L4N
  • Total Availability: 378
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 100 ($1,625.21) ·
L4N - Nsi Industries

Total Availability: In Stock

IT750 - Nsi

The Polaris It-750 Multi-Tap Dual-Side Entry Connector Features 2 Ports Sized For 750 to 250 MCM Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Dual Rated For Use With Copper or Aluminum Cables. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, In

MFR Part #:
IT-750
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
166 Each
Pkg Sizes:
4 Each ($413.40)
PT0600 - Nsi

Offset Pin Terminal 600 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

MFR Part #:
PTO-600
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
11 Each
Pkg Sizes:
3 Each ($315.16)
WW732YL - Nsi

Warriorwrap WW-732-Yl Yellow Vinyl Professional-Quality Electrical Tape Is Strong Enough For Demanding Environments and Highly Resistant to Abrasion and Corrosion. This Tape Is 7MIL Thick, 66FT Long and Has A Max Temperature Rating Of 220 Degrees F. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

MFR Part #:
WW-732-YL
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
101 Each
Pkg Sizes:
1 Each ($8.48)
800T4 - Nsi

4 Port Stacked Lug 800 - 300 MCM Stacked Lugs Are Large Size Set Screw Connectors With Wire Holes Stacked On Top Of Each Other to Minimize The Width Of The Connector. Made Of 6061T-6 Aluminum Alloy. Tin Plated For Low Contact Resistance. Suitable For Use With Both Copper and Aluminum Conductors. Rated 600 Volts (2000V Max. Per UL486B). UL486A/B Listed. Temperature Rating 90 Degrees C. Mounting Hole Spacing Is Nema Standard Of 1.75".

MFR Part #:
800T-4
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
64 Each
Pkg Sizes:
1 Each ($83.28)
IPLD3508 - Nsi

The Polaris IPLD350-8 Multi-Tap Dual-Sided Entry Black Connector Features 8 Ports Sized For 350 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable

MFR Part #:
IPLD350-8
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
66 Each
Pkg Sizes:
2 Each ($332.24)
IPLD6005 - Nsi

The Polaris IPLD600-5 Multi-Tap Dual-Sided Entry Connector Features 5 Ports Sized For 600 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays

MFR Part #:
IPLD600-5
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
33 Each
Pkg Sizes:
2 Each ($296.98)
N3 - Nsi

Copper Split Bolt Connector 3 Awg Copper Split Bolt Connectors Are High-Strength Solderless Service Connectors Made Of High-Copper Alloy For Copper and Copperweld Wires. Type For Two Maximum Wire Sizes.

MFR Part #:
N-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
141 Each
Pkg Sizes:
50 Each ($315.67)
WW7320R - Nsi

Warriorwrap WW-732-or Orange Vinyl Professional-Quality Electrical Tape Is Strong Enough For Demanding Environments and Highly Resistant to Abrasion and Corrosion. This Tape Is 7MIL Thick, 66FT Long and Has A Max Temperature Rating Of 220 Degrees F. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

MFR Part #:
WW-732-OR
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
188 Each
Pkg Sizes:
1 Each ($8.48)
SC8 - Nsi

Standardbarrel TINNEDCOPPERSPLICE8 Awg Standard Barrel Tinned Coppersplices Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

MFR Part #:
SC-8
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
934 Each
Pkg Sizes:
100 Each ($392.71)
SPM5L - Nsi

Service Post Connector, #4 Awg (Stranded) Conductor Size, #2 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 1 Conductor, +90 °C Operating Temperature, 1-1/8 In (Stud) Overall Length, 600 V Ac, 0.17 LB/Ea

MFR Part #:
SPM-5L
Manufacturer:
Nsi
Local Availability:
In Stock
Total Availability:
95 Each
Pkg Sizes:
12 Each ($618.41)
SPM7L - Nsi

Service Post Connector, #1 Awg (Solid);2/0 Awg (Stranded) Conductor Size, Non-Insulated, Copper Conductor Material, 1 Conductor, +90 °C Operating Temperature, 1-1/4 In (Stud) Overall Length, 600 V Ac, 2.76 LB/Ea

MFR Part #:
SPM-7L
Manufacturer:
Nsi
Local Availability:
In Stock
Total Availability:
34 Each
Pkg Sizes:
6 Each ($586.44)
WW716GY - Nsi

Warriorwrap WW-716-Gy Grey Vinyl General Use Electrical Tape Is Strong Enough For Professional Environments and Gets The Job Done Right The First Time, Every Time. This Tape Is 7MIL Thick, 60FT Long and Has A Max Temperature Rating Of 176 Degrees. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

MFR Part #:
WW-716-GY
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
114 Each
Pkg Sizes:
1 Each ($1.74)
ALP2P2 - Nsi

Power Distribution Block (2) 350 MCM-6 Awg Primary (2) 350 MCM-6 Awg Secondary Power Distribution Blocks Are Made Of High Strength, High-Conductivity Aluminum Alloy and Are Mounted In A High-Strength Glass-Filled Polyester Base. Each Block Can Stand Alone or Combine With Other Blocks to Form A Multi-Block Set.

MFR Part #:
AL-P2-P2
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
15 Each
Pkg Sizes:
3 Each ($273.21)
GL50048 - Nsi

1 Hole Short Barrel Copper Compression Lug W/ Peep Hole 500 MCM - 1/2" Bolt Short Barrel Copper Compression Lugs With Peep Hole Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

MFR Part #:
GL50048
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
52 Each
Pkg Sizes:
6 Each ($146.93)
HB809 - Nsi

Hex Bolt, Silicon Bronze Material, 2-1/2 In Length, 1/2 In - 13 Thread Size, 1/2 In Diameter, 0.16 LB

MFR Part #:
HB809
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
2 Each
Pkg Sizes:
25 Each ($431.98)
IPLD2508 - Polaris

The Polaris IPLD250-8 Multi-Tap Dual-Sided Entry Black Connector Features 8 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable

MFR Part #:
IPLD250-8
Manufacturer:
Polaris
Local Availability:
Out Of Stock
Total Availability:
34 Each
Pkg Sizes:
3 Each ($407.85)
IPLD50010 - Nsi

The Polaris IPLD500-10 Multi-Tap Dual-Sided Entry Connector Features 10 Ports Sized For 500 MCM - 4 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Tra

MFR Part #:
IPLD500-10
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
44 Each
Pkg Sizes:
1 Each ($270.58)
IPLD7504 - Nsi

Double Sided Entry Insulated Multi-Tap Connector, 250 MCM Conductor Size, 750 MCM Conductor Size, Insulated, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, 4 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 6.38 In Overall Length, 600 V, 1.87 LB/Ea

MFR Part #:
IPLD750-4
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
82 Each
Pkg Sizes:
2 Each ($392.08)
L1N - Nsi

2 Hole Long Barrel Copper Compression Lug 1 Awg - 1/2" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. Allows Easy Inspection Of The Termination to Assure Complete Cable Insertion. Tin-Plated to Provide Corrosion and Low Contact Resistance. Marked With Die Index and Color Coded. Listed For 35KV Maximum When Properly Installed. Rated 600V. Culus 486A/B Listed. UL467 Listed On Sizes 6 Awg - 3/0 Awg. Temperature Rating 90 Degrees C.

MFR Part #:
L1N
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
152 Each
Pkg Sizes:
50 Each ($817.65)
L4N - Nsi

2 Hole Long Barrel Copper Compression Lug 4 Awg - 1/2" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. Allows Easy Inspection Of The Termination to Assure Complete Cable Insertion. Tin-Plated to Provide Corrosion and Low Contact Resistance. Marked With Die Index and Color Coded. Listed For 35KV Maximum When Properly Installed. Rated 600V. Culus 486A/B Listed. UL467 Listed On Sizes 6 Awg - 3/0 Awg. Temperature Rating 90 Degrees C.

MFR Part #:
L4N
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
378 Each
Pkg Sizes:
100 Each ($1,625.21)

Begin Live Chat