321-340 of 500
ASI1I1 - Nsi

Power Distribution Block 2-14 Awg Primary 2-14 Awg Secondary Power Distribution Blocks Are Made Of High Strength, High-Conductivity Aluminum Alloy and Are Mounted In A High-Strength Glass-Filled Polyester Base. Each Block Can Stand Alone or Combine With Other Blocks to Form A Multi-Block Set.

  • MFR Part #: AS-I1-I1
  • Total Availability: 48
ASI1I1 - Nsi Industries

Total Availability: In Stock

ASK2H6 - Nsi

Power Distribution Block-Small (2) 2/0-14 Awg Primary (6) 4-14 Awg Secondary Power Distribution Blocks Are Made Of High Strength, High-Conductivity Aluminum Alloy and Are Mounted In A High-Strength Glass-Filled Polyester Base. Each Block Can Stand Alone or Combine With Other Blocks to Form A Multi-Block Set.

  • MFR Part #: AS-K2-H6
  • Total Availability: 38
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($147.60) ·
ASK2H6 - Nsi Industries

Total Availability: In Stock

C3 - Nsi

Long Barrel Tinnedcoppersplice 3 Awg Long Barrel Tinned Coppersplices Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

  • MFR Part #: C-3
  • Total Availability: 232
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($595.64) ·
C3 - Nsi Industries

Total Availability: In Stock

CTH24 - Nsi

Heavy Duty Copper C Tap For 2 Awg Applications: Copper "C" Taps Are Range-Taking Compression Connectors Made From High Conductivity Copper Alloy. Ideal For Making Tap or Parallel Copper Connections From 8 Sol to 4/0 STR Conductors. Provides Consistent Reliability With Heavy Wall Construction That Prevents Relaxation Of The Joint After Installation. Installation Time Is Reduced Because Of Its "C" Shape. Ul CU486A, 467 Suitable For Direct Burial and Csa Rated Electrical and Grounding.

  • MFR Part #: CTH-24
  • Total Availability: 38
CTH24 - Nsi Industries

Total Availability: In Stock

IPL2504 - Nsi

The Polaris IPL250-4 Multi-Tap Single Side Entry Connector Features 4 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays, Panel Boa

  • MFR Part #: IPL250-4
  • Total Availability: 3
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($343.44) ·
IPL2504 - Nsi Industries

Total Availability: In Stock

IPLG13 - Nsi

Multi-Port Connector, #10 Awg Conductor Size, #1 Awg Conductor Size, Insulated, Plastisol Insulation Material, Copper Conductor Material, Gray Insulation Color, 3 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 2.27 In Overall Length, 600 V Ac, 0.19 LB/Ea

  • MFR Part #: IPLG1-3
  • Total Availability: 85
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($324.30) ·
IPLG13 - Nsi Industries

Total Availability: In Stock

ISRH750 - Nsi

The Polaris Isrh-750 Heavy-Duty Multi-Tap In-Line Entry Connector Features 2 Ports Sized For 750 MCM €“ 1/0 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Double Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies, and Comes Packaged In A Clear Plastic Bag With A Mounting Hole For Hanging In Retail Disp

  • MFR Part #: ISRH-750
  • Total Availability: 42
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($301.96) ·
ISRH750 - Nsi Industries

Total Availability: In Stock

IT030 - Nsi

Insulation-Tap Connector, #6 Awg Conductor Size, 3/0 Awg Conductor Size, Insulated, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, 2 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 1.84 In Overall Length, 600 V, 0.19 LB/Ea

  • MFR Part #: ITO-3/0
  • Total Availability: 614
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($233.34) ·
IT030 - Nsi Industries

Total Availability: In Stock

L300N - Nsi

2HOLE Long Barrel Copper Compression LUG300 MCM-1/2" Bolt Long Barrel Copper Compression Lugs Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

  • MFR Part #: L300N
  • Total Availability: 41
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 12 ($320.61) ·
L300N - Nsi Industries

Total Availability: In Stock

L356 - Nsi

1 Hole Long Barrel Copper Compression Lug 3 Awg - 5/16" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

  • MFR Part #: L356
  • Total Availability: 29
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 50 ($332.68) ·
L356 - Nsi Industries

Total Availability: In Stock

PT0500 - Nsi

Offset Pin Terminal 500 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

  • MFR Part #: PTO-500
  • Total Availability: 43
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 10 ($803.71) ·
PT0500 - Nsi Industries

Total Availability: In Stock

WW732GN - Nsi

Warriorwrap WW-732-GN Green Vinyl Professional-Quality Electrical Tape Is Strong Enough For Demanding Environments and Highly Resistant to Abrasion and Corrosion. This Tape Is 7MIL Thick, 66FT Long and Has A Max Temperature Rating Of 220 Degrees F. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

  • MFR Part #: WW-732-GN
  • Total Availability: 71
WW732GN - Nsi Industries

Total Availability: In Stock

ASC40T - Nsi

Splice, Copper/Aluminum Conductor Material, 3.13 In Overall Length, 600 V, 0.13 LB

  • MFR Part #: ASC4/0T
  • Total Availability: 46
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 12 ($541.09) ·
ASC40T - Nsi Industries

Total Availability: In Stock

IPLD7508 - Nsi

The Polaris IPLD750-8 Multi-Tap Dual-Sided Entry Connector Features 8 Ports Sized For 750 - 250 MCM Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays,

  • MFR Part #: IPLD750-8
  • Total Availability: 13
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 1 ($288.55) ·
IPLD7508 - Nsi Industries

Total Availability: In Stock

L838P - Nsi

1 Hole Long Barrel Copper Compression Lug With Peep Hole 8 Awg - 3/8" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

  • MFR Part #: L838P
  • Total Availability: 96
L838P - Nsi Industries

Total Availability: In Stock

PT0300 - Nsi

Offset Pin Terminal 300 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

  • MFR Part #: PTO-300
  • Total Availability: 46
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 10 ($642.19) ·
PT0300 - Nsi Industries

Total Availability: In Stock

PT600 - Nsi

Stranded Bi-Metallic Pin Terminal 600 MCM Stranded Bi-Metallic Pin Terminals Is Designed to Facilitate Termination Of Aluminum Conductors. Tin-Plated Stranded Copper Pin. Connector Bores Are Coated With Oxide Inhibitor. Supplied With Epdm Insulating Cover. Ul 486B Listed. Rated 600 Volts.

  • MFR Part #: PT600
  • Total Availability: 16
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($392.33) ·
PT600 - Nsi Industries

Total Availability: In Stock

PTS300 - Nsi

Solid Pin Terminal For Copper and Aluminum Conductors 300 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

  • MFR Part #: PTS300
  • Total Availability: 82
PTS300 - Nsi Industries

Total Availability: In Stock

SKCB2 - Nsi

Easy-Splice Copper Direct Burial Butt Splice Kit For #8 to #2 Awg. Utilizing A Mechanical Copper Butt Splice and A Heavy Wall Heat Shrink Tubing to Create A Fully Insulated Splice For Copper Conductors Only. Temperature Rating: -40 C to 90 C & 600 Volt Maximum.

  • MFR Part #: SKCB-2
  • Total Availability: 26
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 24 ($471.12) ·
SKCB2 - Nsi Industries

Total Availability: In Stock

500SR - Nsi

Aluminum Splicer Reducer 500 MCM - 3/0 Awg Aluminum Splicer Reducers Are Used For Splicing Two Copper or Aluminum Wires Of Equal or Different Sizes. Made Of 6061T-6 Aluminum Alloy. Tin Plated For Low Contact Resistance. Suitable For Use With Both Copper and Aluminum Conductors. Rated 600 Volts.

  • MFR Part #: 500SR
  • Total Availability: 15
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($152.65) ·
500SR - Nsi Industries

Total Availability: In Stock

ASI1I1 - Nsi

Power Distribution Block 2-14 Awg Primary 2-14 Awg Secondary Power Distribution Blocks Are Made Of High Strength, High-Conductivity Aluminum Alloy and Are Mounted In A High-Strength Glass-Filled Polyester Base. Each Block Can Stand Alone or Combine With Other Blocks to Form A Multi-Block Set.

MFR Part #:
AS-I1-I1
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
48 Each
Pkg Sizes:
3 Each ($59.52)
ASK2H6 - Nsi

Power Distribution Block-Small (2) 2/0-14 Awg Primary (6) 4-14 Awg Secondary Power Distribution Blocks Are Made Of High Strength, High-Conductivity Aluminum Alloy and Are Mounted In A High-Strength Glass-Filled Polyester Base. Each Block Can Stand Alone or Combine With Other Blocks to Form A Multi-Block Set.

MFR Part #:
AS-K2-H6
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
38 Each
Pkg Sizes:
3 Each ($147.60)
C3 - Nsi

Long Barrel Tinnedcoppersplice 3 Awg Long Barrel Tinned Coppersplices Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

MFR Part #:
C-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
232 Each
Pkg Sizes:
50 Each ($595.64)
CTH24 - Nsi

Heavy Duty Copper C Tap For 2 Awg Applications: Copper "C" Taps Are Range-Taking Compression Connectors Made From High Conductivity Copper Alloy. Ideal For Making Tap or Parallel Copper Connections From 8 Sol to 4/0 STR Conductors. Provides Consistent Reliability With Heavy Wall Construction That Prevents Relaxation Of The Joint After Installation. Installation Time Is Reduced Because Of Its "C" Shape. Ul CU486A, 467 Suitable For Direct Burial and Csa Rated Electrical and Grounding.

MFR Part #:
CTH-24
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
38 Each
Pkg Sizes:
1 Each ($14.34)
IPL2504 - Nsi

The Polaris IPL250-4 Multi-Tap Single Side Entry Connector Features 4 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays, Panel Boa

MFR Part #:
IPL250-4
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
3 Each
Pkg Sizes:
6 Each ($343.44)
IPLG13 - Nsi

Multi-Port Connector, #10 Awg Conductor Size, #1 Awg Conductor Size, Insulated, Plastisol Insulation Material, Copper Conductor Material, Gray Insulation Color, 3 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 2.27 In Overall Length, 600 V Ac, 0.19 LB/Ea

MFR Part #:
IPLG1-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
85 Each
Pkg Sizes:
6 Each ($324.30)
ISRH750 - Nsi

The Polaris Isrh-750 Heavy-Duty Multi-Tap In-Line Entry Connector Features 2 Ports Sized For 750 MCM €“ 1/0 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Double Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies, and Comes Packaged In A Clear Plastic Bag With A Mounting Hole For Hanging In Retail Disp

MFR Part #:
ISRH-750
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
42 Each
Pkg Sizes:
2 Each ($301.96)
IT030 - Nsi

Insulation-Tap Connector, #6 Awg Conductor Size, 3/0 Awg Conductor Size, Insulated, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, 2 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 1.84 In Overall Length, 600 V, 0.19 LB/Ea

MFR Part #:
ITO-3/0
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
614 Each
Pkg Sizes:
6 Each ($233.34)
L300N - Nsi

2HOLE Long Barrel Copper Compression LUG300 MCM-1/2" Bolt Long Barrel Copper Compression Lugs Is A Type Of Copper Compression Connector That Is Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Resistance and Are Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed.

MFR Part #:
L300N
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
41 Each
Pkg Sizes:
12 Each ($320.61)
L356 - Nsi

1 Hole Long Barrel Copper Compression Lug 3 Awg - 5/16" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

MFR Part #:
L356
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
29 Each
Pkg Sizes:
50 Each ($332.68)
PT0500 - Nsi

Offset Pin Terminal 500 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

MFR Part #:
PTO-500
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
43 Each
Pkg Sizes:
10 Each ($803.71)
WW732GN - Nsi

Warriorwrap WW-732-GN Green Vinyl Professional-Quality Electrical Tape Is Strong Enough For Demanding Environments and Highly Resistant to Abrasion and Corrosion. This Tape Is 7MIL Thick, 66FT Long and Has A Max Temperature Rating Of 220 Degrees F. The Strong Adhesion Helps Stick to Uneven Surfaces and Keeps The Backing In Place. Top Breaking Strength and Elasticity Make Warriorwrap An Excellent Choice For Splicing, Insulating or Marking Wires.

MFR Part #:
WW-732-GN
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
71 Each
Pkg Sizes:
1 Each ($8.48)
ASC40T - Nsi

Splice, Copper/Aluminum Conductor Material, 3.13 In Overall Length, 600 V, 0.13 LB

MFR Part #:
ASC4/0T
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
46 Each
Pkg Sizes:
12 Each ($541.09)
IPLD7508 - Nsi

The Polaris IPLD750-8 Multi-Tap Dual-Sided Entry Connector Features 8 Ports Sized For 750 - 250 MCM Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays,

MFR Part #:
IPLD750-8
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
13 Each
Pkg Sizes:
1 Each ($288.55)
L838P - Nsi

1 Hole Long Barrel Copper Compression Lug With Peep Hole 8 Awg - 3/8" Bolt Long Barrel Copper Compression Lugs Are Produced From High Conductivity Copper Tubing. They Are Tin-Plated to Provide Corrosion Low Contact Resistance. Marked With Die Index and Color Coded For Easy Reference. Listed For 35KV Maximum When Properly Installed and to Cable Manufacturer Instructions. Temperature Rating 90 Degrees C. .

MFR Part #:
L838P
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
96 Each
Pkg Sizes:
1 Each ($6.85)
PT0300 - Nsi

Offset Pin Terminal 300 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

MFR Part #:
PTO-300
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
46 Each
Pkg Sizes:
10 Each ($642.19)
PT600 - Nsi

Stranded Bi-Metallic Pin Terminal 600 MCM Stranded Bi-Metallic Pin Terminals Is Designed to Facilitate Termination Of Aluminum Conductors. Tin-Plated Stranded Copper Pin. Connector Bores Are Coated With Oxide Inhibitor. Supplied With Epdm Insulating Cover. Ul 486B Listed. Rated 600 Volts.

MFR Part #:
PT600
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
16 Each
Pkg Sizes:
3 Each ($392.33)
PTS300 - Nsi

Solid Pin Terminal For Copper and Aluminum Conductors 300 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

MFR Part #:
PTS300
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
82 Each
Pkg Sizes:
1 Each ($53.24)
SKCB2 - Nsi

Easy-Splice Copper Direct Burial Butt Splice Kit For #8 to #2 Awg. Utilizing A Mechanical Copper Butt Splice and A Heavy Wall Heat Shrink Tubing to Create A Fully Insulated Splice For Copper Conductors Only. Temperature Rating: -40 C to 90 C & 600 Volt Maximum.

MFR Part #:
SKCB-2
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
26 Each
Pkg Sizes:
24 Each ($471.12)
500SR - Nsi

Aluminum Splicer Reducer 500 MCM - 3/0 Awg Aluminum Splicer Reducers Are Used For Splicing Two Copper or Aluminum Wires Of Equal or Different Sizes. Made Of 6061T-6 Aluminum Alloy. Tin Plated For Low Contact Resistance. Suitable For Use With Both Copper and Aluminum Conductors. Rated 600 Volts.

MFR Part #:
500SR
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
15 Each
Pkg Sizes:
3 Each ($152.65)

Begin Live Chat