Narrow By:

• Manufacturer: ABB

• Product Type

  

  • 1 Hole Long Barrel 1/2 Hole 4/0 (1)
  • 1/0 Cu STD BRL. 1 Hole 5/16 In Bolt (1)
  • 1/0 Cu STD BRL. 1 Hole.5 Inch Bolt (1)
  • 2 Hole LNG Barrel 1/4-5/8 Holes No4 (1)
  • 2 Pole Luminaire Bulk Pack (1)
  • 2/0 3/8 Al/Cu One Hole Lug (1)
  • 2/0 Cu STD BRL. 1 Hole 5/16 In Bolt (1)
  • 250 Cu STD BRL. 1 Hole 3/8 In Bolt (1)
  • 250 Cu STD BRL.1HOLE.25 Inch Bolt (1)
  • 2WAY Al Splice Conn 250WIRE Red (1)
  • 2WAY Al Splice Conn 350WIRE BRN (1)
  • 2WAY Al Splice Conn 400WIRE GRN (1)
  • 2WAY Al Splice Conn 500WIRE PNK (1)
  • 2WAY Cu Splice Conn LNGBRL 4/0 Pur (1)
  • 350 Cu STD BRL 1 Hole 3/8 Inch Bolt (1)
  • 4/0 Cu STD BRL. 1 Hole.5 Inch Bolt (1)
  • 400 Cu STD. BRL. 1 Hole.5 In Bolt (1)
  • 400 Weld Cu.STD.BRL.1 Hole.5 Inchb (1)
  • 500 Cu STD. BRL. 1 Hole 5/8 In Bolt (1)
  • 600 Cu STD. BRL. 1 Hole 5/8 In Bolt (1)
  • 700 Cu. STD. BRL 1 Hole 5/8 In Bolt (1)
  • Al 1CNDTR 1HOLE Mount 500-1000 (1)
  • Al 2CNDTR 1HOLE Mount 300-800 (1)
  • Al 2WAY Conn Splice 6STR Gry (1)
  • Al 3CNDTR 2HOLE Mount 1/0-14 (1)
  • Al 3CNDTR 2HOLE Mount 2-14 (1)
  • Al Htype Comp Conn 4/0-3/0ACSR 2-6 (1)
  • Al Insul Bus Conn 12-350 4-13/16 Oi (1)
  • Al Multi Bothside Conn 3PORT 250-10 (1)
  • Al Serv Entr Splice A:1/0 B:4SLD (1)
  • Al Serv Entr Splice A:2/0 B:2 5.5 (1)
  • Al Serv Entr Splice A:2/0 B:3-4 5.5 (1)
  • Al Serv Entr Splice A:3/0 B:1-2 5.5 (1)
  • Al Serv Entr Splice A:3/0 B:3/0 5.5 (1)
  • Al Serventr Comp Splice A:1/0 B:1-2 (1)
  • Al Serventr Comp Splice A:1/0 B:3-4 (1)
  • Al Serventr Comp Splice A:1/0 B:6 (1)
  • Al Serventr Comp Splice A:1-2 B:6 (1)
  • Al Serventr Comp Splice A:2/0 B:1/0 (1)
  • Al Serventr Comp Splice A:3-4 B:10 (1)
  • Al Serventr Comp Splice A:3-4 B:8 (1)
  • Al Serventr Comp Splice A:6 B:8 (1)
  • Al Serventr Splice A:1 B:1 3.5 (1)
  • Al Serventr Splice A:1-2STRN B:4SLD (1)
  • Al Serventr Splice A:1-2STRN B:6SLD (1)
  • Al Serventr Splice A:2 B:2 3.5 (1)
  • Al Serventr Splice A:4/0 B:1/0 3.5 (1)
  • Al Serventr Splice A:4/0 B:1-2 3.5 (1)
  • Al Serventr Splice A:4/0 B:2/0 3.5 (1)
  • Al Serventr Splice A:4/0 B:2/0 5.5 (1)
  • Al Serventr Splice A:4/0 B:3-4 3.5 (1)
  • Al Serventr Splice A:4/0 B:4/0 5.5 (1)
  • Al Split - Bolt 2 - 8 Awg (1)
  • Al Split - Bolt 4 - 10 Awg (1)
  • Al TP 1CNDTR 1HOLE Mount 300-800 (1)
  • Al TP 1HL Lug Long BRL 1/0 3/8B Tan (1)
  • Al TP 1HL Lug Long BRL 3/0 3/8B Rby (1)
  • Al TP 1HL Lug Long BRL 350 5/8B BRN (1)
  • Al TP 1HL Lug Long BRL 600 5/8B BLK (1)
  • Al TP 1HL Lug Long BRL NO4 3/8B GRN (1)
  • Al TP 1HL Lug Longbrl NO4 5/16B GRN (1)
  • Al TP 2HL Lug Long BRL 1/0 3/8B Tan (1)
  • Al TP 2HL Lug Long BRL 250 1/2B Red (1)
  • Al TP 2HL Lug Long BRL 350 1/2B BRN (1)
  • Al TP 2HL Lug Long BRL 600 1/2B BLK (1)
  • Al TP Dual Splitbolt Conn 1/0-4STR (1)
  • Aluminum Multi Tap Insulated Conn (1)
  • AMT Connector (2)
  • Automatic Tension Splice Connector (2)
  • Butt Splice (4)
  • Butt Splice Connector (11)
  • Compression Connector, 1-Bolt (1)
  • Compression H-Tap Connector (1)
  • Compression Lug (14)
  • Compression Splice (3)
  • Comprsleeve Connector (1)
  • Conn, CPRSN 2-Way (1)
  • Connector Compresion 1bolt (1)
  • Connector, Compres. 2 Way (1)
  • Connector, Compresion 2 Bolt (1)
  • Connector, Compress.1 Bolt (1)
  • Connector, Compression (1)
  • Copper Connector (3)
  • Copper Inchcinch Crimps (1)
  • C-Tap (1)
  • Cu 1CNDTR 1HL MNT Tang 4STR-3/0STR (1)
  • Cu 1CNDTR 1HL MNT Tang 8STR-2STR (1)
  • Cu 2BLT Conn W/O SPCR 1/0-4/0 9/16B (1)
  • Cu C-Type Comp Tap 1/0-1/0 1/0-2/0 (1)
  • Cu C-Type Comp Tap 1/0-1/0 8-2 (1)
  • Cu C-Type Comp Tap 2-2 2-2 (1)
  • Cu C-Type Comp Tap 3/0-4/0 3/0-4/0 (1)
  • Cu C-Type Comp Tap 6-4 4-4 (1)
  • Cu TP 1HL Lug Long BRL 500 1/2B BRN (1)
  • Cu TP 1HL Lug Longbrl 250 1/2B Red (1)
  • Cu TP 1HL Lug Longbrl NO1 5/16B GLD (1)
  • Cu TP 1HL Lug Shortbrl 2 3/8B BRN (1)
  • Cu TP 1HL Lug Shortbrl 3/0 3/8B Org (1)
  • Cu TP 1HL Lug SHRTBRL 2 1/2B BRN (1)
  • Cu TP 1HL Lug SHRTBRL 4 3/8B Gry (1)
  • Cu TP 2HL Lug Long BRL 2 1/2B BRN (1)
  • Cu TP 2HL Lug Long BRL 2/0 1/2B BLK (1)
  • Cu TP 2HL Lug Long BRL 3/0 1/2B Org (1)
  • Cu TP 2HL Lug Long BRL 350 1/2B Red (1)
  • Cu TP 2HL Lug Long BRL NO1 1/2B BLK (1)
  • Cu TP 2HL Lug Longbrl (1)
  • Cu TP 2HL Lug Longbrl 1/0 5/16 PNK (1)
  • Cu TP 2HL Lug Longbrl 3/0 1/2B Org (1)
  • Cu TP 2HL Lug Longbrl 4/0 3/8B Pur (2)
  • Cu TP 2HL Lug Longbrl 750 1/2B BLK (1)
  • Cu TP 2HL Lug Longbrl NO6 3/8B Blu (1)
  • Cu TP 2HL Lug STNDBRL 3/0 3/8B Org (1)
  • Cu TP 2HL Lug STNDBRL NO1 1/4B GRN (1)
  • Cu TP 2HL Lug STNDBRL NO4 1/4B Gry (1)
  • Cu TP 2WAY Conn Splice STND 3/0 Rby (1)
  • Cu TP Splice Long BRL 1STR GRN (1)
  • Cu TP Splice Long BRL 350STR Red (1)
  • Cu TP Splice Long BRL 400 Blu (1)
  • Cu TP Splice Short BRL 1STR GRN (1)
  • Cu TP Splice Short BRL 3-2STR BRN (1)
  • Exp Ins Vinyl Butt Splce, 22-18 Le (1)
  • Exp Ins Vinyl LKG FRK Term 12-10 Yl (1)
  • Exp Ins Vinyl Ring Term, 18-14, No6 (1)
  • Female Disconnect (3)
  • Female Disconnector (5)
  • Fig 6 Conn, 250-500 Main, 4-2 Tap (1)
  • Fork Terminal (11)
  • Full Ins Nylon Male-250 Tab 16-14 (1)
  • Full Ins Nylon Male-250 Tab 22-18 (1)
  • Fully Ins Nyl Fem-250 Disc, 12 (1)
  • Fully Ins Nylon Fem Disconnect (1)
  • Fully Ins Nylon Male-250 Tab 12-10 (1)
  • Fy Ins Nyl Fem-250 Disc, 16-14 Len . (1)
  • Heat-SHR Butt Splice 12-10 Len 1.6 (1)
  • H-STRNGTH Splitblt Conn 2SLD-6SLD (1)
  • H-STRNGTH Splitblt Conn 750-600 (1)
  • HSTRNGTH Splitbolt Conn 1STR-8SLD (1)
  • HSTRNGTH Splitbolt Conn 2-8SLD (1)
  • HTSHK Thin Wall 1/8IN I.D. BLK 25FT (1)
  • H-Type Compression Connector (9)
  • Ins Nyl Fem-187 Disc 16-14 Len .83 (1)
  • Ins Nyl Fem-250 Disc 12-10 Len .8 (1)
  • Ins Nyl Fem-250 Disc 12-10 Len 1.0 (1)
  • Ins Nyl Fem-250 Disc 22-18 Len .91 (1)
  • Ins Nyl Fork Term 12-10 NO10 Yell (1)
  • Ins Nyl Fork Term 12-10 NO8 Yello (1)
  • Ins Nyl Fork Term 18-14 BH NO10 Blu (1)
  • Ins Nyl Fork Term 18-14 BLTNO8 Blue (1)
  • Ins Nyl Fork Term 22-16 BLT NO8 Red (1)
  • Ins Nyl LKG Fork Term 18-14 No10 (1)
  • Ins Nyl PRL Splice 18-16 Len 0.84 (1)
  • Ins Nyl Ring Term 22-16 BLT NO8 Red (1)
  • Ins Nyl Ring Term 8 Bolt 5/16IN Red (1)
  • Ins Nyl RNG Term 12-10 Bolt 1/4 Yel (1)
  • Ins Nylon Butt Splice 12-10 Awg (1)
  • Ins PP Ferrule 10, 6 MM2, LG .787 (1)
  • Ins PP Ferrule 12, 4 MM2, LG .787 (1)
  • Ins PP Ferrule 12, 4 MM2, LG .889 (1)
  • Ins PP Ferrule 20, .5 MM2, LG .531 (1)
  • Ins Vin Ring Term 12-10 5/16IN Yel (1)
  • Ins Vinl Fork Term 12-10 BLT NO6 Ye (1)
  • Ins Vinl Fork Term 12-10 BLT NO8 Ye (1)
  • Ins Vinyl Butt Splice, 12-10 Len 1. (1)
  • Ins Vinyl Fork Term 18-14 NO6 Blue (1)
  • Ins Vinyl Fork Term 18-14 NO8 Blue (1)
  • Ins Vinyl Fork Term 22-16 NO10 Red (1)
  • Ins Vinyl LKG FRK TRM 22-16 BLT No8 (1)
  • Ins Vinyl Male-250 Tab 22-18 Red (1)
  • Ins Vinyl Ring Term 12-10 1/4IN Yel (1)
  • Ins Vinyl Ring Term 18-14 1/4IN Blu (1)
  • Ins Vinyl Ring Term 22-16 NO6 Red (1)
  • Ins Vinyl Ring Term 22-16 NO8 Red (1)
  • Insnyl LKG Fork Term 12-10 NO10 Yel (1)
  • Insul Splice 2-2/0 Awg 1IN Bolt (1)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Ferrule (4)
  • Insulating Sleeve (12)
  • Lay In Lug 14 - 4 Awg Tin Plated (1)
  • Locktite Cu 1HOLE Lug 4/0-300 (1)
  • Male Tab (1)
  • Mechanical Connector Lug (17)
  • Multi Cableblock 2WAY 350-10 2out (1)
  • NO1 Cu STD BRL. 1 Hole.5 Inch Bolt (1)
  • NO14 to NO10 Cu STD. Bar. 1/4 Bolt (1)
  • NO2 Cu STDBRL 1 Hole 5/16 Inch Bolt (1)
  • NO8 STD. BRL. 1 Hole 5/16INCH Bolt (1)
  • Non-Ins - BS Ring Term, 4, 1/2, Met (1)
  • Non-Ins - BS Ring Term, 4, 1/4, Met (1)
  • Non-Ins - BS Ring Term, 6, 1/4, Met (1)
  • Non-Ins 250 Series Adapter Len 0.82 (1)
  • Non-Ins BS Ring Term 4 1/4 (1)
  • Non-Ins BS Ring Term 6 5/16 (1)
  • Non-Ins BS RNG Term NO6 Awg 1/2 BLT (1)
  • Non-Ins BS RNG Term NO6 Awg 3/8 BLT (1)
  • Nonins BS RNG Term NO8 Awg NO10 BLT (1)
  • Non-Ins Fem-250 Flag Disc, 12-10 Le (1)
  • Non-Ins Ferrule 2, 35 MM2, LG 1.26 (1)
  • Non-Ins PRL Splice, 2, Cma 52, 600-8 (1)
  • Non-Ins Ring Term 12-10 1/4 Meta (1)
  • Nonins Ring Term, 12-10, NO10, Meta (1)
  • Non-Ins Ring TRM 12-10 Bolt 1/4 (1)
  • Non-Ins RNG TRM Hvydty 16-14 BLT1/4 (1)
  • Non-Ins Tub Ring 2/2AN 5/16 (1)
  • NS Vinl Ring Term 12-10 NO8 Yellow (1)
  • Nylon Barrel Flag Discon. 10-12 250 (1)
  • Nylon Butt Splice, 22-16 (1)
  • Panelboard Lug (1)
  • PGTL Wire JNT 3-NO12 Max 2-NO14 Min (1)
  • Ring Terminal (10)
  • S Bolt-Main:1-2cualacsr (1)
  • S-Bolt 2/0 - 6 Awg Copper (1)
  • Service Entrance Compression Splice (5)
  • Service Post Connector (8)
  • Splice Offset Pvcinsul 2PORT 2/0-14 (1)
  • Split - Bolt Connector 4/0 - 4 Awg (1)
  • Split Bolt Connector (14)
  • SRVC Post/DBL 1/0-2 STR/Sol (1)
  • SRVC Post/Single 4/0-2 STR 4/0-1sol (1)
  • Standard Barrel Single Hole Compression Lug (18)
  • Talon Insul Conn 1/0-8 2-8 (1)
  • Talon Insul Conn 4/0-1/0 1/0-6 (1)
  • Talon Insul Conn 4/0-1/0 4/0-1/0 (1)
  • Talon Insul Conn 500-350 4/0-4 (1)
  • Two-Way Splice Connector (9)
  • Vinyl 250 Piggyback, 22-16 (1)
  • Vinyl Insul Female Disconnect (1)
  • Vinyl Insul Male Disconn 12-10 Yel (1)
  • Vinyl Insul Male Disconnect (1)
  • Vinyl Insulated Butt Splice 16-14 (1)
  • Vinyl Insulated Male Tab 16-14 Awg (1)
  • Vinyl Ring Terminal, 16-14, 5/16 ST (1)
  • Vinyl Ring, 12-10, 3/8 Stud (1)
  • Vinyl Ring, 22-16, 1/4 Stud (1)
  • Vnyl Ins FRK Term 22-16 NO8 Red (1)
  • Vnyl Insul RNG Term 16-14 NO6 Blue (1)
  • Vnyl Insul RNG Term 22-16 NO10 Red (1)
  • Vnyl Insul RNG Term 22-16 NO6 Red (1)
  • Vnyl Insul RNG Term 22-16 NO8 Red (1)
  • Vnyl Marker-1-1/8X4-1/2 L240 Volts (1)
  • Vnyl Marker-1-1/8X4-1/2 L277 Volts (1)
  • Vnyl Marker-1-1/8X4-1/2 L480 Volts (1)
  • White Nylon 3/4IN W Tape 11 1/2FT L (1)
  • White Poly. 1 /2IN Wide Tape 18FT L (1)
  • White Poly. 3/4IN Wide Tape 18FT L (1)
  • Wire Marker Book (4)
  • Wire MKR BK-3X5 Vnyl CLTH L0-9-Q460 (1)
  • Wire MKR BK-3X5 Vnyl CLTH Lmix-Q460 (1)
  • Wire MKR BK-Vnyl Self Lam-1/2X1-1/4 (1)
  • Wire MKR BK-Vnyl Self Lam-1X6-Qty30 (1)
  • Yell. Heat Shrink 1/2IN Tape 5FT L (1)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (1)
  • Blackburn Grounding (12)
  • Blackburn Mechanical (157)
  • Catamount (5)
  • Color Keyed / Blackburn (2)
  • COLOR-KEYED (161)
  • EZ-Code (11)
  • E-Z-Code Id (8)
  • Homac (7)
  • Shrink-Kon (3)
  • Sta-Kon (166)
  • T&B Elec Suppl (2)
  • T&B Ind Fitting (6)
  • Thomas & Betts (9)
  • Thomas&Betts-Abb Ins Prod (11)
  • Tools & Accessories (1)
  • Ty-Rap (7)
  • Show More...

• Sub Brand

  

  • Blackburn (74)
  • Color-Keyed (48)
  • E-Z-CODE ID (5)
  • Shrink-Kon (1)
  • Spec-Kon (4)
  • Sta-Kon (35)
  • T&B (6)
  • Ty-Rap (6)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (Stranded);#10 AWG (Solid);6 sq.mm (Stranded) (1)
  • #12 AWG (12)
  • #14 AWG (8)
  • #14 AWG (Minimum Tap with Maximum Main);#10 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#12 AWG (Stranded Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#8 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Solid) (1)
  • #14 AWG (Stranded) (1)
  • #16 AWG (7)
  • #18 AWG (6)
  • #2 AWG (1)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Stranded) (1)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (3)
  • #3 AWG (1)
  • #4 AWG (1)
  • #4 AWG (Range for Equal Main and Tap-Solid) (1)
  • #4 AWG (Stranded) (1)
  • #6 AWG (3)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Stranded Main);#6 AWG (Stranded Tap);#8 AWG (Stranded Main) (1)
  • #6 AWG (Stranded) (10)
  • #8 AWG (1)
  • #8 AWG (Range for Equal Main and Tap);#12 AWG (Minimum Tap with Maximum Main) (1)
  • #8 AWG (Range for Equal Main and Tap-Solid) (1)
  • #8 AWG (Range of Equal Main and Tap-Solid) (1)
  • #8 AWG (Solid) (1)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • 250 kcmil (Range for Equal Main and Tap) (1)
  • 400 kcmil (Range for Equal Main and Tap) (1)
  • 6/1 AWG (ASCR);2/0 AWG (AAAC);2/0 AWG (AAC) (1)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (1)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #10 AWG (12)
  • #10 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (13)
  • #18 AWG (3)
  • #2 AWG (7)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (ASCR );#1 and #2 AWG (Stranded );#1 AWG (Solid ) (1)
  • #2 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Stranded) (1)
  • #3 AWG (Range for Equal Main and Tap-Solid);#16 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #4 AWG (5)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (ASCR);#2 AWG (Solid ) (1)
  • #4 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #4 AWG (Stranded Main);#4 AWG (Stranded Main) (1)
  • #4 AWG (Stranded) (1)
  • #5 AWG (Stranded);#4 AWG (Solid);16 sq.mm (Stranded) (1)
  • #6 AWG (7)
  • #6 AWG (ASCR );#4 AWG (Solid ) (1)
  • #6 AWG (Range for Equal Main and Tap);#4 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #6 AWG (Solid Equal Main and Tap) (1)
  • #6 AWG (Solid);#4 AWG (Stranded) (1)
  • #6 AWG (Stranded) (1)
  • #8 AWG (5)
  • #8 AWG (Solid Equal Main and Tap) (1)
  • 1/0 AWG (7)
  • 1/0 AWG (ACSR);1/0 AWG (Stranded) (1)
  • 1/0 AWG (ASCR );1/0 AWG (Stranded );#1 AWG (Solid ) (1)
  • 1/0 AWG (ASCR);1/0 AWG (Stranded);2/0 AWG (Compact Conductor-Stranded) (1)
  • 1/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 1/0 AWG (Stranded) (3)
  • 1/0 AWG (Stranded);1/0 AWG (Solid);50 sq.mm (Stranded) (1)
  • 2/0 AWG (7)
  • 2/0 AWG (ASCR);2/0 AWG (Stranded);3/0 AWG (Compact Conductor-Stranded) (1)
  • 2/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 2/0 AWG (Stranded ) (1)
  • 2/0 AWG (Stranded) (2)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (6)
  • 250 kcmil to #1AWG (Range of Equal Main and Tap);#8 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 250 MCM (1)
  • 3/0 AWG (3)
  • 300 kcmil (2)
  • 350 kcmil (7)
  • 350 kcmil (Range for Equal Main and Tap);1/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 4/0 AWG (4)
  • 4/0 AWG (ASCR);4/0 AWG (Stranded) (1)
  • 4/0 AWG (Range for Equal Main and Tap-Stranded);#6 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 500 kcmil (3)
  • 500 kcmil (Range for Equal Main and Tap);2/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 600 kcmil (3)
  • Standard Conductor-Main:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Standard Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Campact Conductor-Main:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:#3, #4, #6 AWG (ACSR), #2, #3, #4, #6 AWG (Stranded), #1, #2, #3, #4 AWG (Solid);Standard Conductor-Tap A:#8, #10, #12, #14 AWG (Stranded), #8, #10, #12, #14 AWG (Solid) (1)
  • Standard Conductor-Main:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded), 3/0, 2/0, 1/0, #1 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2, #3, #4 (ASCR), 2/0, 1/0, #1, #2, #3 (Stranded), #1, #2 (Solid);Standard Conductor-Tap A:#8, #10 (Stranded), #6, #8, #10 (Solid);Standard Conductor-Tap B:#12, #14 (Stranded), #12, #14 (Solid) (1)
  • Standard Conductor-Main:2/0, 1/0 AWG (ACSR), 3/0, 2/0 AWG (Stranded), 4/0, 3/0 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0,1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded), 3/0, 2/0 AWG (Solid);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded) (1)
  • Show More...

• Insulation Material

  

  • Nylon (4)
  • PVC (2)
  • Vinyl (32)
  • Show More...

• Conductor Material

  

  • Aluminum (19)
  • Aluminum;Copper (23)
  • Brass (4)
  • Brass with Copper Sleeve (4)
  • Bronze (1)
  • Copper (108)
  • Copper;Aluminum (8)
  • Show More...

• Insulation Color

  

  • Black (2)
  • Black (Die Color) (6)
  • Blue (16)
  • Blue (Die Color) (5)
  • Brown (Die Color) (7)
  • Gray (Code) (1)
  • Gray (Die Color) (5)
  • Green (Code) (1)
  • Green (Die Color) (3)
  • Olive (Code) (1)
  • Orange (2)
  • Orange (Die Color) (3)
  • Orange;Red (1)
  • Pink (Code) (1)
  • Pink (Die Color) (3)
  • Purple (Die Color) (3)
  • Red (8)
  • Red (Die Color) (7)
  • White (1)
  • White (Code) (1)
  • Yellow (14)
  • Yellow (Code) (1)
  • Yellow (Die Color) (2)
  • Yellow;Gray (1)
  • Show More...

• Voltage Rating

  

  • 300 kV (1)
  • 300 V (4)
  • 35 kV (141)
  • 600 V (148)
  • 600 V ac (21)
  • 600 V ac/dc (1)
  • Show More...

• Number Of Conductors

  

  • 1 (13)
  • 2 (74)
  • 3 (5)
  • 4 (1)
  • Show More...

• Special Features

  

  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper alloy pressure bar (1)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper pressure bar. Bolt and nut of hex design (2)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (13)
  • Bolt and pressure bar of copper alloy, completely tin plated for corrosion resistance. Contoured spacer of electrolytic copper (6)
  • Bolt and Pressure Bar of Copper Alloy, Completely Tin Plated for Corrosion Resistance;Contoured Spacer of Electrolytic Copper (1)
  • Castings and bolts of high-strength copper alloy. Removable cap (1)
  • Catalog numbers ending with the suffix X indicate an expanded insulation grip. This means a wider wire entry to accommodate heavy wall insulation. Ring terminals Won't fall free even if the mounting screw loosens (3)
  • Choose from a variety of marking area sizes. Clear area covers print legend for extra protection (3)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (5)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Prefilled with Oxide Inhibitor to prevent oxidation and keep out moisture. All Splices are color coded and marked with strip lengths, installation die codes and compression locations, providing easy identification for easy installation (11)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Tough Stabilized nylon sleebes resist installing tool Pressure and provide Reliable 600 V Insulation. Prefilled with Oxide Inhibitor to prevent Oxidation and keep out moisture. All Splices are Color Coded and Marked with trip lengths, Installation Die Codes and Compression Locations, Providing easy Identification for easy Installation. Splices have Colored End Caps to make Identification (7)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Easy Entry Copper Insulation Sleeve (7)
  • Easy Installation - no special tools required (8)
  • Easy Installation;No Special Tools Required (21)
  • Efficient Design Requires Less Crimping Force;Full Length Tab Makes Installation Easy;Installs with Standard Compression Tools and Dies. Rus Accepted (1)
  • Especially Suited for use with Flexible Metallic Conduit (13)
  • Expanded Entry. Brazed Seams (Yellow - Tubular). Internal Barrel Serrations (2)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • E-Z-Ground&reg, connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • E-Z-Ground&Reg;Connectors are Designed for Direct Burial and Offer a Safe, Efficient Alternative to Exothermic Welding Products (1)
  • E-Z-Ground® connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • Ferrules ensure reliable electrical connections when terminating conductors in screw clamp terminal blocks (10)
  • Flame-retardant, cross-linked polyolefin (2)
  • Flame-Retardant;Cross-Linked Polyolefin (1)
  • For aluminum and copper concentric conductors and compact code aluminum strandings (12)
  • For Aluminum;Copper Concentric Conductors;Compact Code Aluminum Strandings (3)
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications (insulated conductor only). Performs as splice or tab for non-tension applications up to 600 volts, depending on size of connector (4)
  • For easily installed, permanent terminations of solid, round, or stranded nichrome wires as used in toasters, heaters, etc (1)
  • For Easy Reliable Sealing Of Motor Disconnect Boots;For Disconnect Series MD-M and MD-F (1)
  • Fully Insulated. Metal Insulation Sleeve. Molded Insulator. Internal Barrel Serrations. Funnel Entry. (2)
  • Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams (3)
  • Funneled Barrel Entry;Deep Internal Serrations;Brazed or Overlapping Seams. (1)
  • Helps prevent mistakes and trial and error searching during electrical service work (3)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (11)
  • High Performance, Dual Rated Connectors (1)
  • Ideal for swimming pool grounding applications. Carries "DB" marking for direct burial (1)
  • In butt splices, the wires are butted together and crimped at each end of the splice. These splices are color-coded according to wire size (5)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (3)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Installs with standard wrenches (4)
  • Kit includes: 12 different Sta-Kon Terminals, WT112M Hand Tool, Package of TY525M Cable Ties and a WM-0 THRU 9 Wire Marker Book (1)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (22)
  • Long Barrel;High Conductivity (14)
  • Made of 1350 Aluminum Alloy for high strength and high conductivity. Standard Compression tools and dies install all sizes - no special tools needed. Field-proven ribbed design enables excellent connector/conductor contact without distorting the conductor's shape. Fold-in tabs provide tab interlock as tool closes. Prefilled with oxide inhibitor held captive in the rib/connection area (1)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made of high-conductivity seamless copper tubing. Tin plated for corrosion resistance (16)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations (19)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations. (1)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • More economical than other taps and split bolts in terms of purchase, inventory, installation time, insulation and maintenance (1)
  • Nylon insulated splices meet or exceed the requirements of MIL-T-7928. These splices are color-coded according to wire size (3)
  • Oversized electrical contacts improve conductivity and reduce temperature rise. Integral wire leads ease installation. Fool-proof design enables mating halves to be installed in only one way. Finger-safe line side prevents installer from touching hot contacts. Rounded compact design small enough to be used in compact applications - fits through 1/2 knockout." (1)
  • Perfect for wire and cable. Print heat-shrink sleeves on the spot (3)
  • Perfect for wire and cable. Print heat-shrink sleeves on the spot. (1)
  • Pocket pack wire marker books are easy to carry and easy to use. The material is an all-purpose vinyl coated cloth tape exclusively designed to resist abrasion, oil, water, and dirt (4)
  • Pocket Pack Wire Marker Books are Easy to Carry and Easy to Use;The Material is an All-Purpose Vinyl Coated Cloth Tape Exclusively Designed to Resist Abrasion, Oil, Water, and Dirt (4)
  • Positive, All-Around Compression with Low Resistance and High Pull-Out Values (3)
  • Pre-insulated for fast, easy installation of large home or commercial service entrances. Concave polyethylene end caps seal out dirt, but are easily pierced when inserting conductor (6)
  • PVC Insulation Eliminates Insulation Failures and Reduces Outage Costs;Removable Port and Screw Plugs (2)
  • Quick, reliable method of connection to terminal blocks and boards without the use of tools. Unique construction of the female disconnect offers long-term dependability (2)
  • Re-enterable motor stub insulator (1)
  • Resistant to corrosion and preserve the electrical integrity of the wires in single or multiple strands. Feature an intelligent constructable part number for quick identification of the wire range (1)
  • Rubber Insulation. PVC Boot and Locking Insulator. Oxide Inhibitor (1)
  • Self Sticking Safety Signs have a 5 to 8 year Durability (2)
  • Self-insulated with heat-shrinkable polyolefin and internally coated sealant. Upon completed installation, a fully sealed connection is achieved to protect the joint against the degrading effects of galvanic action, corrosion, and environmental exposure (2)
  • Self-Insulated With Heat-Shrinkable Polyolefin and Internally Coated Sealant. Upon Completed Installation;A Fully Sealed Connection Is Achieved to Protect The Joint Against The Degrading Effects Of Galvanic Action;Corrosion;and Environmental Exposure. (1)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Splices large conductors required for commercial service, use as low cost reducing sleeve. All sizes can be installed with popular mechanical and hydraulic tools. Center stop assures proper conductor positioning. Quick identifications with color-coded foil caps (12)
  • Splices Large Conductors Required for Commercial Service;Use as Low Cost Reducing Sleeve;All Sizes can be Installed with Popular Mechanical and Hydraulic Tools;Center Stop Assures Proper Conductor Positioning;Quick Identifications With Color-Coded Foil Caps (3)
  • Standard Barrel;High Conductivity (18)
  • These fork terminals have extra-long PVC insulation sleeve for protection and stress relief at wires flex point. Brazed seam barrel is serrated for high pull-out value. Insulation is color-coded (7)
  • These non-insulated fork terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (1)
  • These Non-Insulated Fork Terminals are Made Of Electrolytic Copper For High Conductivity. They Can Be Installed With Crimping Tools Having a Single Indentor or Double Indentor (recommended For Solid Wire). Serrated Barrel Increases Grip On Wire. (1)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire) (2)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (14)
  • These Non-Insulated Ring Terminals are Made of Electrolytic Copper for High Conductivity;They can be Installed with Crimping Tools Having a Single Indentor or Double Indentor;Serrated Barrel Increases Grip on Wire (1)
  • These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wires flex point. Brazed seam barrel is serrated to obtain high pull-out value (13)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (6)
  • Thin Strips of the Grass-Skirt mold around the conductors to provide a highly reliable end enclosure. Tapered Drains in both cover halves prevent accumulation of water within the cover, reqardless of which half of the cover is down. Made from Black Polypropylene to resist the elements, UV sun rays and common contaminants (1)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (25)
  • Unique construction of the female disconnect offers long-term dependability. Brazed seam serrated barrel provides maximum tensile strength (12)
  • Unique Construction Of The Female Disconnect Offers Long-Term Dependability. Brazed Seam Serrated Barrel Provides Maximum Tensile Strength. (3)
  • Uniquely designed pressure bar and notched v-bottom collar provide vise-like grip between conductor and terminal (3)
  • Wires are laid side by side in the connector, and the splice connection is complete in one crimp (1)
  • Show More...

• Overall Length

  

  • 0.43 in (1)
  • 0.571 in;14.5 mm (1)
  • 0.650 in;16.5 mm (1)
  • 0.75 in (1)
  • 0.866 in;22 mm (1)
  • 0.899 in (2)
  • 0.95 in (1)
  • 0.96 in (1)
  • 0.965 in;24.5 mm (1)
  • 0.97 in (6)
  • 0.971 in (1)
  • 0.984 in;25 mm (1)
  • 0.986 in (2)
  • 1 in (3)
  • 1.06 in (2)
  • 1.088 in (1)
  • 1.09 in (3)
  • 1.13 in (3)
  • 1.16 in (2)
  • 1.20 in (1)
  • 1.23 in (1)
  • 1.25 in (1)
  • 1.29 in (1)
  • 1.31 in (2)
  • 1.38 in (1)
  • 1.41 in (1)
  • 1.42 in (1)
  • 1.50 in (3)
  • 1.54 in (1)
  • 1.63 in (1)
  • 1.65 in (3)
  • 1.70 in (1)
  • 1.75 in (3)
  • 1.81 in (1)
  • 1.88 in (2)
  • 1.92 in (1)
  • 1.93 in (1)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-1/4 in (1)
  • 1-1/8 in (1)
  • 1-11/15 in (1)
  • 1-11/32 in (1)
  • 1-13/15 in (1)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 1-19/32 in (1)
  • 13.75 in (1)
  • 13/16 in (1)
  • 1-3/64 in (1)
  • 1-5/32 in (1)
  • 16.25 in (1)
  • 1-61/64 in (1)
  • 1-7/18 in (1)
  • 1-7/8 in (1)
  • 1-9/32 in (1)
  • 2 in (7)
  • 2.03 in (2)
  • 2.18 in (2)
  • 2.23 in (1)
  • 2.25 in (2)
  • 2.28 in (1)
  • 2.50 in (1)
  • 2.60 in (2)
  • 2.68 in (1)
  • 2.70 in (1)
  • 2.85 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (1)
  • 2-13/16 in (1)
  • 2-25/32 in (5)
  • 2-3/16 in (1)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 3.30 in (1)
  • 3.5 in (3)
  • 3.66 in (1)
  • 3/4 in (1)
  • 31/32 in (1)
  • 3-1/32 in (1)
  • 3-3/16 in (2)
  • 4 in (1)
  • 4.20 in (1)
  • 4.48 in (1)
  • 4.70 in (1)
  • 4-1/4 in (1)
  • 4-3/16 in (2)
  • 5.40 in (1)
  • 5.83 in (1)
  • 6 in (1)
  • 9/16 in (1)
  • Show More...

• Terminal Type

  

  • Compression (17)
  • Compression;Crimp (22)
  • Crimp (3)
  • Disconnect Terminal (5)
  • Fork Terminal (12)
  • Male Tab (1)
  • Ring Terminal (7)
  • Ring Tongue (3)
  • Screw (24)
  • Splice Connector (4)
  • Split (14)
  • Tension (2)
  • Tongue (32)
  • Wire Joints (1)
  • Wire Terminal Disconnect (2)
  • Show More...

• For Use With

  

  • Aluminum/Copper Code Conductor (3)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Copper and Aluminum Conductor (17)
  • Copper Conductor (44)
  • Direct Burial (1)
  • For Combinations of Aluminum-to-Aluminum Conductors;Aluminum-to-Copper Conductors (3)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • Hydraulic Tool (9)
  • Overhead Tension Connection (2)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (10)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connections;Copper;Aluminum;ASCR Conductor (1)
  • Standard Conductors (5)
  • Tapping Copper Conductors to Unbroken Main Copper Conductors (1)
  • Temporary Connections to Male Disconnects and Terminal Blocks. (2)
  • Terminate;Splice (2)
  • Show More...

• Maximum Voltage Rating

  

  • 35 kV (49)
  • 600 V (8)
  • 600 V ac (21)
  • 600 V ac/dc (1)
  • Show More...

• Application

  

  • 100.000 1000.000 (1)
  • Above Ground Application (1)
  • Applications certified to 600 V and recommended up to 35 kV¥ (25)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Dual-Rated Connector (1)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (10)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (15)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors. Use as a low tension reducing sleeve for Insulated Conductor (6)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For flat applications (1)
  • For high temperature applications over 105 degree C (2)
  • For Standard Conductor Splice (12)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use on aluminum conductors (6)
  • For use on copper conductors (1)
  • Ideal for in-line splicing applications (1)
  • Insulate motor lead disconnects (1)
  • Insulate motor stub splices quickly and dependably (1)
  • Overhead Tension Connection (2)
  • Provides terminating point for a group of wires running in one direction (4)
  • Secure Double-Locking latches, provide a close-fitting top and bottom seal (1)
  • Snaps Into a Regular Bushin to Make a UL Listed Insulated Bushing (1)
  • Snaps into a Regular Bushing to make a UL Listed Insulated Bushing (12)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (27)
  • Wire Termination (22)
  • Wire Termination and Insulation (1)
  • Show More...

• Weight

  

  • 0.0001 lb (1)
  • 0.0003 lb (2)
  • 0.0006 lb (1)
  • 0.0018 lb (1)
  • 0.0018 lb/EA (1)
  • 0.0025 lb/EA (1)
  • 0.003 lb (7)
  • 0.004 lb (3)
  • 0.005 lb (1)
  • 0.005 lb/EA (1)
  • 0.006 lb (6)
  • 0.008 lb (1)
  • 0.01 lb (2)
  • 0.01 lb/EA (13)
  • 0.0137 lb/EA (1)
  • 0.02 lb (2)
  • 0.02 lb/EA (13)
  • 0.0238 lb/EA (1)
  • 0.03 lb/EA (10)
  • 0.032 lb/EA (1)
  • 0.04 lb/EA (7)
  • 0.05 lb/EA (8)
  • 0.06 lb/EA (8)
  • 0.07 lb/EA (5)
  • 0.073 lb/EA (1)
  • 0.08 lb/EA (6)
  • 0.085 lb/EA (1)
  • 0.09 lb/EA (9)
  • 0.1 lb/EA (5)
  • 0.11 lb/EA (1)
  • 0.12 lb/EA (3)
  • 0.13 lb/EA (6)
  • 0.14 lb/EA (3)
  • 0.15 lb/EA (3)
  • 0.1509 lb/EA (1)
  • 0.16 lb/EA (3)
  • 0.17 lb/EA (2)
  • 0.18 lb/EA (1)
  • 0.19 lb/EA (3)
  • 0.21 lb/EA (2)
  • 0.219 lb/EA (1)
  • 0.22 lb/EA (1)
  • 0.25 lb/EA (3)
  • 0.26 lb/EA (1)
  • 0.28 lb/EA (1)
  • 0.3 lb/EA (3)
  • 0.30 lb/EA (1)
  • 0.35 lb/EA (2)
  • 0.37 lb/EA (1)
  • 0.38 lb/EA (2)
  • 0.41 lb/EA (1)
  • 0.54 lb/EA (1)
  • 0.55 lb/EA (1)
  • 0.59 lb/EA (1)
  • 0.7 lb/EA (1)
  • 0.7460 lb/EA (1)
  • 0.75 lb/EA (1)
  • 0.79 lb/EA (1)
  • 0.93 lb/EA (1)
  • 1 lb/EA (1)
  • 8.7 lb (1)
  • Show More...

• Package Quantity

  

  • 1 ct (1)
  • 1 CT;100 PK (4)
  • 1 CT;1000 PK (1)
  • 1 CT;150 PK (2)
  • 1 CT;200 PK (2)
  • 1 CT;250 PK (1)
  • 1 CT;30 PK (3)
  • 1 CT;300 PK (1)
  • 1 CT;50 Pk (1)
  • 1 CT;500 PK (1)
  • 1 CT;6 Pk (1)
  • 1 CT;60 Pk (2)
  • 1 RE (1)
  • 10 CT;100 PK (19)
  • 10 CT;240 PK (4)
  • 10 CT;50 PK (1)
  • 100 CT (1)
  • 100 CT;1000 PK (2)
  • 100 CT;400 PK (3)
  • 100 CT;500 PK (7)
  • 100 CT;600 PK (6)
  • 100 CT;800 PK (5)
  • 1000 CT (1)
  • 1000 CT;10000 PK (11)
  • 1000 CT;20000 PK (1)
  • 1000 CT;5000 PK (3)
  • 12 CT (1)
  • 12 CT;120 PK (6)
  • 15 PK (10)
  • 20 CT;200 PK (1)
  • 200 CT;2000 PK (2)
  • 25 CT (2)
  • 25 CT;1 PK (1)
  • 25 CT;100 PK (2)
  • 25 CT;1200 PK (1)
  • 25 CT;150 PK (2)
  • 25 CT;250 PK (20)
  • 25 PK (2)
  • 250 CT (1)
  • 3 CT;30 PK (2)
  • 4 CT;40 PK (1)
  • 5 CT;25 PK (1)
  • 5 CT;50 PK (2)
  • 50 CT (2)
  • 50 CT;200 PK (1)
  • 50 CT;25 PK (1)
  • 50 CT;250 PK (2)
  • 50 CT;500 PK (17)
  • 500 CT (1)
  • 500 CT;10000 PK (1)
  • 500 CT;5000 PK (11)
  • 6 CT;60 PK (5)
  • Show More...

• Category Description

  

  • Comp & Mech Lugs and Butt Splices (277)
  • DISCONNECTS (1)
  • FLEX & MC FITTINGS (13)
  • HEAT/COLD SHRINK (4)
  • SPLIT BOLTS (55)
  • T&B C TAP LUGS (20)
  • TAPE (3)
  • TERMINALS (167)
  • WIRE LUBE, MARKERS, & TIES (17)
  • WIRE NUTS (3)
  • Show More...

• Material

  

  • 6061-T6 Aluminum Connector, Santoprene Body (1)
  • Aluminum (116)
  • Body - Modified Neoprene Elastomer, Straps - Nylon (1)
  • Brass (33)
  • Brass with Copper Sleeve (4)
  • Bronze Alloy (16)
  • Carrying Case is Plastic (1)
  • Copper (300)
  • COPPER ALLOY (7)
  • Nickel Alloy (1)
  • Nylon (17)
  • Polyester (4)
  • Polyolefin (2)
  • Polypropylene (1)
  • Porcelain (2)
  • PVC (1)
  • PVC insulated (1)
  • Steel (1)
  • Thermoplastic Rubber (1)
  • Vinyl (8)
  • Vinyl Cloth (8)
  • Show More...

• Finish

  

  • Bare (4)
  • Electro -Tin Plated (14)
  • Tin Plated (54)
  • Tinned (36)
  • Tin-Plated (29)
  • Uncoated (1)
  • Show More...

• Color

  

  • Black (30)
  • Black on Orange (1)
  • Blue (79)
  • Brown (26)
  • Gold (2)
  • Gray (15)
  • Green (20)
  • Metallic (41)
  • Multiple Colors (1)
  • OLIVE (3)
  • Orange (11)
  • Pink (17)
  • Purple (11)
  • Red (63)
  • Red and Black Header on White (1)
  • RUBY (2)
  • Tan (3)
  • White (9)
  • Yellow (61)
  • Show More...

• Stud Size

  

  • #10 (2)
  • 1/2 in (45)
  • 1/4 in (24)
  • 3/8 in (31)
  • 5/16 in (14)
  • 5/8 in (9)
  • Show More...

• Minimum Qty

  

  • 10 (1)
  • 100 (50)
  • 1000 (13)
  • 15 (3)
  • 20 (5)
  • 200 (5)
  • 25 (5)
  • 50 (47)
  • 500 (13)
  • 75 (3)
  • Show More...

• Number Of Mounting Holes

  

  • 1 (19)
  • 2 (9)
  • Show More...

• Type

  

  • Aluminum Flood-Seal Multi-Port Connector RAB 350 Series (1)
  • Aluminum Splice (15)
  • Automatic Tension Splice (2)
  • Compression Splice Service Entrance (49)
  • Conduit and Voltage Marker Cards (3)
  • Copper Connectors (8)
  • C-Tap (8)
  • C-Type Compression Tap (5)
  • Dual-Rated (5)
  • Dual-Rated Mechanical Connector (24)
  • E-Z-Ground Compression Grounding (1)
  • Heat Shrinkable Butt Splice (3)
  • H-Type Compression Tap Connector (11)
  • Insulated Conductor Connectors (4)
  • Insulating Sleeve (13)
  • Label Printers and Labels (4)
  • Long Barrel (61)
  • Long Barrel 90 Degree Bend (1)
  • Long Barrel Copper Splice (3)
  • Luminaire Disconnect (1)
  • Mechanical Connector (1)
  • Mechanical Grounding (12)
  • Motor Disconnect Boot (1)
  • Non-Insulated 90 Degree Flag Female Disconnect (1)
  • Non-Insulated Adapter (1)
  • Non-Insulated Female Disconnect (1)
  • Non-Insulated Ferrule (1)
  • Non-Insulated Fork Terminal (2)
  • Non-Insulated Heavy-Duty Ring Terminal (1)
  • Non-Insulated Parallel Splice (1)
  • Non-Insulated Ring Terminal (17)
  • Nylon Fully Insulated Female Barrel Flag Disconnect (1)
  • Nylon Fully Insulated Female Disconnect (5)
  • Nylon Fully Insulated Male Disconnect (3)
  • Nylon Insulated Butt Splice (4)
  • Nylon Insulated Female Disconnect (5)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (2)
  • Nylon Insulated Open Top 90 Degree Flag Female Disconnect (2)
  • Nylon Insulated Parallel Splice (1)
  • Nylon Insulated Ring Terminal (10)
  • Nylon Insulated Wire Joint (4)
  • Polypropylene Insulated Ferrule (9)
  • Safety Labels (2)
  • Short Barrel Copper Splice (2)
  • SPLICE (13)
  • Splice Connector (14)
  • Splice Insulators and Insulating Covers (1)
  • Split-Bolt (27)
  • Standard Barrel (63)
  • TERMINAL KIT (1)
  • Thin-Wall Heat Shrinkable Tubing (3)
  • Two-Bolt Connector (1)
  • Type C, H-Type Compression Connector Cover (1)
  • Vinyl Insulated Butt Splice (12)
  • Vinyl Insulated Female Disconnect (9)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (23)
  • Vinyl Insulated Male Disconnect (8)
  • Vinyl Insulated Piggy Back Disconnect (1)
  • Vinyl Insulated Ring Terminal (38)
  • Wire Connectors & Termination (2)
  • Wire Marker Books (11)
  • Show More...

• Temperature Rating

  

  • 105 C (12)
  • 150 C (3)
  • 75 C (4)
  • 90 C (15)
  • Show More...

• Cable Size

  

  • #16 to 10 AWG (1)
  • 1 AWG (8)
  • 1/0 AWG (11)
  • 14-10 AWG (1)
  • 2 AWG (15)
  • 2/0 AWG (11)
  • 250 kcmil (7)
  • 3/0 AWG (9)
  • 300 kcmil (1)
  • 350 kcmil (6)
  • 4 AWG (9)
  • 4/0 AWG (10)
  • 400 AWG (1)
  • 400 kcmil (2)
  • 500 kcmil (4)
  • 6 AWG (11)
  • 600 kcmil (6)
  • 700 kcmil (2)
  • 750 kcmil (2)
  • 8 AWG (5)
  • 8-1/0 AWG (1)
  • Show More...

• Wire Size

  

  • 10 AWG (1)
  • 12 AWG (2)
  • 12-10 AWG (40)
  • 14 AWG (1)
  • 16 AWG (2)
  • 16-14 AWG (12)
  • 18 AWG (1)
  • 18-14 AWG (25)
  • 18-17 AWG (1)
  • 2 AWG (2)
  • 20 AWG (1)
  • 22-16 AWG (22)
  • 22-18 AWG (1)
  • 4 AWG (3)
  • 6 AWG (7)
  • 8 AWG (6)
  • Main .204 to .162 in , Tap .128 to .204 in (1)
  • Main: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG (1)
  • Main: #3 to #6 ACSR or #2 to #6 STR or #1 to #4 SOL AWG , Tap: #8 to #14 STR or #8 to #14 SOL AWGp: #8 to #14 STR AWG , #8 to #14 SOL AWG (1)
  • Main: 1/0 to #2 ACSR or 2/0 to #1 STR AWG , Tap: 1/0 to #2 ACSR or 2/0 to #2 STR AWG (1)
  • Main: 1/0 to #3 ACSR or 2/0 to #2 STR or 3/0 to #1 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 1/0 to #4 ACSR or 2/0 to #3 STR or 2/0 to #2 SOL AWG , Tap A: #8 to #10 STR or #6 to #10 SOL AWG , Tap B: #12 to #14 STR or #12 to #14 SOL AWG (1)
  • Main: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 4/0 to 2/0 SOL AWG , Tap: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Main: 2/0 to 1/0 ACSR or 3/0 to 2/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Main: 4/0 to 3/0 ACSR or 4/0 to 3/0 STR AWG , Tap: 2/0 to #1 ACSR or 2/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Show More...

• Size

  

  • 13/16 inch Length (1)
  • 2 INCH (16)
  • 2-25/32 inch (12)
  • 3-1/2 Inch (15)
  • 5 x 3 /12 (1)
  • Length 1-1/2 inch (1)
  • Length 1-11/16 inch (1)
  • Length 1-13/16 inch (3)
  • Length 13/16 inch (1)
  • Length 1-7/16 inch (1)
  • Length 1-7/8 inch (1)
  • Length 2-3/16 inch (1)
  • Length 2-7/16 inch (1)
  • Length 4-13/16 inches (1)
  • Splice 4 inch, Sleeve 5-1/2 inch (6)
  • Various Sizes Included (1)
  • Show More...