Filter Your Results

• Brands & Manufacturers
• Nsi Industries

---

• Product Type

  

  • #8 Vinyl Ring 1/4" Stud-Bulk (1)
  • .500" Poly Spiral Wrap (1)
  • 1 1/2" Screw-In Conn Ins (1)
  • 1 1/4" Screw-In Conn Ins (1)
  • 1 Awg Copper Long Barrel Splice - Green (1)
  • 1 Awg Copper Short Barrel Splice - Green (1)
  • 1 LQDT. Conn. Ins. (1)
  • 1 LQDT. Conn. Ins. 90 Deg (1)
  • 1" Angle Conn. Ins. Zinc (1)
  • 1" Clamp Back, Alum (1)
  • 1" Grounding L/N W/Lug (1)
  • 1" RGD Pipe Strap Alum (1)
  • 1" Screw-In Conn. Ins. (1)
  • 1" Steel Expansion Coupling (1)
  • 1/0 Awg 1/2'' 2-Hole Aluminum Long Lug - Tan (1)
  • 1/0 Awg Aluminum Splice - Dual Rated - Tan (1)
  • 1/0 Awg Copper Long Barrel Splice - Pink (1)
  • 1/0 Awg Copper Short Barrel Splice - Pink (1)
  • 1/2" 90 Deg Conn. Ins. Zinc (1)
  • 1/2" LQDT Conn. Ins. (1)
  • 1/2" Screw-In Conn. Ins. (1)
  • 1/2" Stem & Swivel Pencil, On 1-5FC/Off 3-15FC, 6"Leads, 208- (1)
  • 1/2" Stem Lexan, On 1-5FC/Off 3-15FC, 6"Leads, 120V, 2000W T (1)
  • 1-1/2" Angle Conn. Ins. Zinc (1)
  • 1-1/2" Emt/Flex Coupling (1)
  • 1-1/4" Angle Conn. Ins. Zinc (1)
  • 1-1/4" Sealing Locknut (1)
  • 1-1/4" Steel Expansion Couplin (1)
  • 120 / 208-277V SPST Conduit Mounting (1)
  • 12-10 Vinyl Lockspade 50 Pack # 6 Stud (2)
  • 15 Minute In-Wall Twist Timer, Commercial Metal Faceplate (1)
  • 18-8 Awg Copper Crimp Sleeve, 50 Per Pack (1)
  • 2 Awg Aluminum Splice - Dual Rated - Pink (1)
  • 2 Awg Copper Long Barrel Splice - Brown (1)
  • 2" 90 Deg Conn. Ins. Zinc (1)
  • 2" Combo. CPLG. (1)
  • 2" Ins Rain Tight Compression (1)
  • 2" Mogul Conduit Body (1)
  • 2" Screw-In Conn. Ins. (1)
  • 2/0 Awg 1/2'' 2-Hole Aluminum Long Lug - Olive (1)
  • 2/0 Awg Aluminum Splice - Dual Rated - Olive (1)
  • 2/0 Awg Copper Short Barrel Splice - Black (1)
  • 2-1/2" Rain Tight Ins Conn (1)
  • 24 Hour Cycle Timer 20A 120/208-277V SPDT Indoor Metal Enc (1)
  • 250 MCM 1/2'' 1-Hole Aluminum Long Lug - Red (1)
  • 250 MCM 1/2'' 2-Hole Aluminum Long Lug - Red (1)
  • 250 MCM Copper Long Barrel Splice - Yellow (1)
  • 250 MCM Copper Short Barrel Splice - Yellow (1)
  • 2X350-6 Line 2X350-6 Load (1)
  • 3 Awg Copper Short Barrel Splice - White (1)
  • 3" Raintight Ins Connector (1)
  • 3" Steel Expansion Coupling (1)
  • 3/0 Awg 1/2'' 1-Hole Aluminum Long Lug - Ruby (1)
  • 3/0 Awg 1/2'' 2-Hole Aluminum Long Lug - Ruby (1)
  • 3/0 Awg Copper Long Barrel Splice - Orange (1)
  • 3/0 Awg Copper Short Barrel Splice - Orange (1)
  • 3/4 LQDT.Conn.Ins. 90 Deg Zinc (1)
  • 3/4" 90 Deg Conn. Ins. Zinc (1)
  • 3/4" Barrel Type NM-B Cable CO (1)
  • 3/4" Steel Expansion Coupling (1)
  • 300 MCM 1/2'' 2-Hole Aluminum Long Lug - Blue (1)
  • 350 MCM 1/2'' 1-Hole Aluminum Long Lug - Brown (1)
  • 350 MCM 1/2'' 2-Hole Aluminum Long Lug - Brown (1)
  • 350 MCM Copper Long Barrel Splice - Red (1)
  • 350 MCM Copper Short Barrel Splice - Red (1)
  • 4 Awg Aluminum Splice - Dual Rated - Green (1)
  • 4" SQ Box, 1-1/2" Deep, Drawn (1)
  • 4" SQ Box, 2-1/8" DP, Welded 1 (1)
  • 4" SQ Flat Cover (1)
  • 4/0 Awg 1/2'' 2-Hole Aluminum Long Lug - White (1)
  • 4/0 Awg Copper Long Barrel Splice - Purple (1)
  • 4/0 Awg Copper Short Barrel Splice - Purple (1)
  • 400 MCM 1/2'' 2-Hole Aluminum Long Lug - Green (1)
  • 500 MCM 1/2'' 1-Hole Aluminum Long Lug - Pink (1)
  • 500 MCM Copper Long Barrel Splice - Brown (1)
  • 500 MCM Copper Short Barrel Splice - Brown (1)
  • 500MCM Al CMP 1/2" Holes X 1-3/4" Spacing, Narrow Tang (1)
  • 6 Awg Copper Short Barrel Splice - Blue (1)
  • 600 MCM 1/2'' 2-Hole Aluminum Long Lug - Black (1)
  • 600 MCM Aluminum Splice - Dual Rated - Black (1)
  • 600 MCM Copper Long Barrel Splice - Green (1)
  • 600MCM Al CMP 1/2" Holes X 1-3/4" Spacing, Narrow Tang (1)
  • 750 MCM 1/2'' 2-Hole Aluminum Long Lug - Yellow (1)
  • 750 MCM Aluminum Splice - Dual Rated - Yellow (1)
  • 8 Awg Copper Short Barrel Splice - Red (1)
  • 90° Connector (17)
  • 90°Connector (17)
  • AC/MC Single Screw Strap Type Connector (5)
  • Al Pin Terminal Cu Pin 300 MCM (1)
  • Al Pin Terminal Cu Pin 350 MCM (1)
  • Al Pin Terminal Cu Pin 600 MCM (1)
  • Al Wide Range Connector #1-8 Awg (1)
  • Al/Cu Conn. 4-14 Awg 22 Holes 20 Circuit (1)
  • Box Extender (2)
  • Box Support (1)
  • Butt Splice Connector (2)
  • Clamp (9)
  • Clamp-On Entrance Cap (9)
  • Combination Coupling (4)
  • Compression Connector (11)
  • Compression Coupling (2)
  • Compression Lug (5)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Conduit Chased Nipple (9)
  • Conduit Coupling (1)
  • Conduit Hanger (14)
  • Conduit Hanger With Bolt (14)
  • Conduit Mount (4)
  • Connector (14)
  • Connector Block (1)
  • Copper Compression Lug (5)
  • Cord Grip Alum 90 Deg 1 .562 - .625 (1)
  • Cord Grip Connector (6)
  • Cord Grip Steel 1/2 NPT .562 - .625 (1)
  • Coupling (5)
  • Crimp Tool (1)
  • Cu Lay-In Connector 4-14 Awg (1)
  • Cutting Plier (1)
  • Cyclops 2 Cable Jacket Stripper (1)
  • Digital Clock With Supercap (1)
  • Direct Burial Splice Kit 8 - 2 Awg (1)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Double Snap Cable Connector (1)
  • Dual Ratd Lug Two 800-300 (1)
  • Dual Rated Lug Al/Cu 800-300 MCM (1)
  • Dual Rated Transformer Lug 350-6 (1)
  • Dual Rated Transformer Lugs 600 MCM - 2 Awg (2)
  • Duct Tape (1)
  • Easy-Splice Roll On (2)
  • Easy-Stack Cable Stacker - 25 Pack (2)
  • Electrical Tape (2)
  • Emt Compression Connector (23)
  • Emt Compression Coupling (23)
  • EMT Concrete Tight Connector (5)
  • EMT Concrete Tight DC Connector (9)
  • Emt Insulating Bushing (10)
  • Emt Set Screw Connector (6)
  • Emt Set Screw Coupling (15)
  • EMT SS Diecast Connector (9)
  • EMT/FMC Combination Coupling (2)
  • Flat Washer (1)
  • Flexible Connector (5)
  • Flush Mount (3)
  • Ground Clamp (13)
  • Ground Connector (2)
  • Ground Rod Clamp (4)
  • Grounding Pigtail (1)
  • Hanger (2)
  • Hex Nut (1)
  • Ins Serv Ent Sleeve PNK-PNK 4/0-4/0 STR (1)
  • Insulated Butt Splice (4)
  • Insulated Grounding Bushing (10)
  • Insulating Bushing (8)
  • Insulation-Tap Connector (9)
  • Intersystem Bonding Connector (2)
  • Lay-In Connector (2)
  • Liquid Tight Straight Connector (8)
  • Lock Washer (1)
  • Locknut (13)
  • MC Conn Al 1/2 .525 - .650 (1)
  • Mechanical Connector (15)
  • Metal Enclosure (1)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Nail Type Strap (1)
  • Nema Panel Lug (2)600-2 (1)
  • Nema Panel Lug (4)250-6 (1)
  • Nema Panel Lug 250-6 (1)
  • Occupancy Sensor (1)
  • Offset Nipple (6)
  • One Hole Strap (7)
  • Panelboard Lug (2)
  • Pipe Strap (16)
  • Pir Ceiling Oc Sensor 1000W 120/277V (1)
  • Plastic Bushing (10)
  • Plug (6)
  • Polaris Ins Multi-Tap 1/0 5 Port Sse (1)
  • Polaris Unins Multi-Tap 250 8 Port (1)
  • Power Distribution Block (15)
  • Powergrp Cable Tie Natural 24" 175LB (50PK) (2)
  • Pull Elbow (3)
  • Push-In Connector (3)
  • PWR Dist 1X2-14 Line 1X2-14 Load (1)
  • PWR Dist 2X 2/0-14 Line 6X4-14 Load (1)
  • PWR Dist 2X2/0-14 Line 6X2-14 Load (1)
  • Raintight Compression Coupling (5)
  • Raintight Connector (6)
  • Reducing Bushing (15)
  • Reducing Washer (22)
  • Replacement Motor 208-277V, 60HZ (1)
  • Retrofit Adapter Plate to Other Brand En (1)
  • Romex Connector (4)
  • Roof Flashing (3)
  • Safety Plate (1)
  • Screw-On Liquid Tight Connector (1)
  • Service Entrance Fitting (5)
  • Service Entrance Kit (1)
  • Service Post Connector (3)
  • Set Screw Connector (1)
  • Set Screw EMT Connector (6)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Solderless Lug 3/0-4 Copper (1)
  • Splice (3)
  • Splice Kit (2)
  • Splicer Reducer (3)
  • Splicer/Reducer 250-6 (1)
  • Splicer/Reducer 350-6 (1)
  • Split Bolt Connector (7)
  • Split Bolt Copper 2/0 Tin Plated (1)
  • Split Bolt Copper 250 Tin Plated (1)
  • Split Bolt Copper 3 (1)
  • Split Bolt Copper 3/0 (1)
  • Split Bolt Copper 350 (1)
  • Split Bolt Copper 350 Tin Plated (1)
  • Split Bolt Copper 500 (1)
  • Split Bolt Copper 500 Tin Plated (1)
  • Squeeze Connector (16)
  • Standard Grey Easy Twist, 22-14 Awg - Carton Of 100 (1)
  • Step Panel Lug (3) 600-2 (1)
  • Step Panel Lug Two 350-6 (1)
  • Strap (3)
  • Strap Connector (14)
  • Submersible Connector (2)
  • Supercap (2)
  • Switch Box Support (1)
  • Terminal Lug (3)
  • Terminal Lug Copper 8-14 (1)
  • Time Clock (1)
  • Time Switch (11)
  • Timer (4)
  • Timer Swtch (2)
  • Tinned Copper Splice- Long Barrel, 8 Awg (1)
  • Transformer (1)
  • Transformer 595-1006 (1)
  • Tripper (1)
  • Turnlock Receptacle With Bracket, 120-480V, 15A Max, 12" Lea (1)
  • Twist Timer (4)
  • Twist-On Wire Connector (7)
  • Two Hole Strap (6)
  • VDV Mapmaster 3.0 Cable Tester. Box. (1)
  • Weatherproof Outlet Cover Durable Resistance Shell (2)
  • Wedge Clamp (1)
  • Winged Blue Easy Twist, 14-6 Awg - Carton Of 50 (1)
  • Winged Grounding Easy Twist Connector - Standard Jar Of 100 (1)
  • Winged Red Easy Twist, 18-8 Awg - Standard Jar Of 100 (1)
  • Winged Wire Connector (10)
  • Winged Yellow East Twist, 18-10 Awg - Small Jar Of 100 (1)
  • Wire Holder (2)
  • WRD Tap Covr 5/8" "O" Die (1)
  • Show More...

• Brand

  

  • 98010027731 (2)
  • Blueline (1)
  • Bridgeport (582)
  • Bridgeport Fittings (265)
  • Connector Bloks(TM) (20)
  • Easy-Twist (2)
  • Metallics (1)
  • NSi (461)
  • Nsi Industries (222)
  • Photocontrols (1)
  • Platinum Tools (31)
  • PLATINUM TOOLS INC (2)
  • Polaris (49)
  • Powergrp (24)
  • PROGRESS (1)
  • Remke (4)
  • Remke Industries (18)
  • TORK (10)
  • Tork(R) (28)
  • Show More...

• Trade Size

  

  • #1 (1)
  • 0 (1)
  • 0.375 (1)
  • 0.5 (25)
  • 0.75 (27)
  • 1 (70)
  • 1 in (11)
  • 1 to 1/2 in (2)
  • 1 to 3/4 in (2)
  • 1.25 (25)
  • 1.25 in (5)
  • 1.5 (30)
  • 1/2 (24)
  • 1/2 in (39)
  • 1/2 to 3/8 in (1)
  • -1/4 - 1/2 (1)
  • 1-1/2 (34)
  • 1-1/2 - 1/2 (1)
  • 1-1/2 in (9)
  • 1-1/2 to 1 in (2)
  • 1-1/2 to 1/2 in (1)
  • 1-1/2 to 1-1/4 in (2)
  • 1-1/2 to 3/4 in (2)
  • 1-1/4 (30)
  • 1-1/4 in (10)
  • 1-1/4 to 1 in (2)
  • 1-1/4 to 1/2 in (1)
  • 1-1/4 to 3/4 in (2)
  • 2 (39)
  • 2 in (37)
  • 2 to 1 in (2)
  • 2 to 1/2 in (1)
  • 2 to 1-1/2 in (2)
  • 2 to 1-1/4 in (2)
  • 2 to 3/4 in (2)
  • 2 to 4 in (1)
  • 2.5 (22)
  • 2.5 in (1)
  • 2-1/2 (10)
  • 2-1/2 IN (13)
  • 2-1/2 to 1-1/2 in (1)
  • 2-1/2 to 1-1/4 in (1)
  • 2-1/2 to 2 in (2)
  • 3 (43)
  • 3 1/2 (2)
  • 3 1/2 - 3 (1)
  • 3 in (3)
  • 3 to 2 in (1)
  • 3 to 2-1/2 in (2)
  • 3 to 4 in (1)
  • 3.5 (11)
  • 3/4 (26)
  • 3/4 in (40)
  • 3/4 to 1/2 in (2)
  • 3/4 to 3/4 in (1)
  • 3/4-1/2 (1)
  • 3/8 (13)
  • 3/8 in (13)
  • 3-1/2 (13)
  • 3-1/2 in (6)
  • 4 (36)
  • 4 - 3-1/2 (1)
  • 4 in (4)
  • 5 (2)
  • 5 in (1)
  • 6 (1)
  • 6 in (1)
  • 9 in (1)
  • Show More...

• Sub Brand

  

  • 3M(TM);Scotch(R) (1)
  • Aluminum Compression (2)
  • Bridgeport (12)
  • Easy Twist (2)
  • Easy Wrap(TM) (3)
  • Easy-Splice(TM) (5)
  • Easy-Twist(TM) (21)
  • Fullman (4)
  • Grounding (2)
  • Mechanical Connector (3)
  • Mighty-Hold(TM) (1)
  • Miniterms (1)
  • NSI (41)
  • Photocontrols (2)
  • Polaris Black (19)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Split Bolts (10)
  • Show More...

• Material

  

  • 1 (1)
  • 304 Grade Stainless Steel (1)
  • 6061-T6 Aluminum Body - Valox Nylon 6/6 Base - Lexan 500R Polycarbonate Panels and Covers (2)
  • ABS (2)
  • Aluminum (89)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum body -Glass Filled Polyester Base (2)
  • Aluminum body -Glass Filled Polyester Base (3)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • Aluminum/Stainless Steel (3)
  • Aluminum;Glass Filled Polyester (1)
  • Brass (1)
  • Brass (Body);Stainless Steel (Conductor) (1)
  • Brass and Nickel Plated (1)
  • Brass, Nickel (1)
  • Bronze (1)
  • Cast Bronze (1)
  • Cast Zinc (4)
  • Clear Acrylic (3)
  • Copper (105)
  • Copper, Nylon (2)
  • Copper, PVC (1)
  • Copper/PVC (1)
  • Die Cast Zinc (12)
  • Die-Cast Zinc (65)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • EPDM RUBBER (1)
  • Fiber Reinforced Thermal Plastic (3)
  • Galvanized Steel (1)
  • Glass Filled Polyester (1)
  • HEAT SHRINK (1)
  • High Carbon Tool Steel (1)
  • High Copper Alloy Body;Silicon Bronze (Nut;Lockwasher) (2)
  • High Strength Plated Aluminum Alloy (1)
  • LEXAN (1)
  • Malleable Iron (44)
  • Malleable Iron (Clamps);Steel (Bolt and Nut) (1)
  • Malleable Iron Clamp, Steel U-Bolt and Nuts (1)
  • Malleable Iron Clamps, Steel Bolt and Nut (2)
  • Metal (5)
  • Metal Brushed Aluminum (3)
  • Neoprene (2)
  • Non-Combustible (1)
  • Noryl (1)
  • Nylon (8)
  • Nylon 66 (2)
  • Nylon 6-6 (3)
  • Nylon Insulation (14)
  • Nylon Plastic (7)
  • Plastic (55)
  • Plastic (Enclosure) (1)
  • Plastic/Zinc (1)
  • Plastic;Metal (Box) (1)
  • Plastisol (1)
  • Poly coated Cloth, Rubber adhesive (1)
  • Polycarbonate (6)
  • Polyethylene (1)
  • Polypropylene (4)
  • Porcelain (2)
  • PVC (3)
  • Silicon Bronze (5)
  • Silicon Bronze (Body) (4)
  • Silicon Bronze (Body);Stainless Steel (Screw) (4)
  • Silicon Bronze (Body);Zinc Plated Steel (Screw) (4)
  • Silicon Bronze (Body;Screw) (2)
  • Silicone Bronze (1)
  • SILICONE RUBBER (1)
  • Stainless Steel (6)
  • Steel (193)
  • Steel (Cover);Malleable Iron (Ball) (1)
  • Steel (Die Head) (1)
  • Steel Cover with Malleable Iron Ball (1)
  • Steel;Polyethylene (Seal) (1)
  • Thermoplastic (27)
  • TIN PLATED COPPER (5)
  • UV Polyethylene (2)
  • Vinyl (36)
  • Vinyl Impregnatted Cloth (2)
  • Vinyl Insulation (35)
  • Zinc Alloy (12)
  • Zinc Cast (14)
  • Zinc Die Cast (132)
  • Zinc Die Cast Body with Steel Saddle Clamps and Insulated Throat (1)
  • Zinc Die Cast with Spring Steel Inner Locking Ring (2)
  • Zinc Die Cast, Tin Plated Aluminum (1)
  • ZINC PLATED STEEL (9)
  • Show More...

• Finish

  

  • Acrylic (3)
  • Aluminum (27)
  • As Cast (2)
  • Ball burnish (174)
  • Ball Burnished (3)
  • Ball Burnished;Mirror Smooth (67)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Black Oxide (1)
  • Chromated (1)
  • CHROME (1)
  • COPPER (28)
  • Enamel (33)
  • Enamel paint (5)
  • EPDM Rubber Insulated (8)
  • Galvanized (4)
  • Green (1)
  • Green Colored (1)
  • Hot Dip Galvanized (1)
  • Hot-Dip Galvanize (3)
  • Natural (26)
  • Nickel (1)
  • NO FINISH (59)
  • NYLON (2)
  • Plain (12)
  • Plastisol (2)
  • Plastisol Insulated (82)
  • Polycarbonate (3)
  • Polypropylene (2)
  • Powder Coat (1)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (34)
  • Tin Plated (121)
  • Tin Plated Bronze (19)
  • Tin Plated Copper (9)
  • Tin-Plated (1)
  • Zinc Coated (1)
  • Zinc Electro Plated (1)
  • Zinc electro-plate (1)
  • Zinc Electroplated (252)
  • Zinc Electro-Plated (22)
  • Zinc Plated (6)
  • Show More...

• Model

  

  • ISW (2)
  • MWH-1 (1)
  • Push Button (2)
  • RWH-1 (1)
  • Show More...

• Minimum Conductor Size

  

  • #1/0 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (2)
  • #10 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (Stranded and Solid) (1)
  • #12 AWG (1)
  • #14 AWG (17)
  • #14 AWG (Stranded) (2)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #2 AWG (2)
  • #2 AWG (Range of Equal Main and Tap-Solid) (1)
  • #22 AWG (3)
  • #22 AWG;#18 AWG (1)
  • #4 AWG (11)
  • #4 AWG (Stranded) (1)
  • #6 AWG (28)
  • #6 AWG (Range of Equal Main and Tap-Solid) (1)
  • #6 AWG (Stranded) (2)
  • #8 AWG (5)
  • #8 AWG (Range of Equal Main and Tap-Solid) (1)
  • #8 AWG (Solid) (1)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #10 AWG;(1) #12 AWG (1)
  • (2) #14 AWG (1)
  • (2) #18 AWG (2)
  • (2) #22 AWG (2)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (1)
  • (3) #22 AWG (2)
  • 250 MCM (6)
  • 4/0 AWG (1)
  • Show More...

• Length

  

  • 0.5 in (1)
  • 0.558 in (1)
  • 0.625 (1)
  • 0.743 in (1)
  • 0.75 (1)
  • 0.945 in (1)
  • 0.99 (1)
  • 1 (1)
  • 1 in (8)
  • 1.062 (2)
  • 1.125 (1)
  • 1.13 in (1)
  • 1.1875 in (1)
  • 1.240 in (1)
  • 1.25 in (2)
  • 1.34 in (1)
  • 1.375 (1)
  • 1.38 in (2)
  • 1.41 in (1)
  • 1.44 in (1)
  • 1.440 in (1)
  • 1.445 in (1)
  • 1.5 (1)
  • 1.5 in (2)
  • 1.50 in (1)
  • 1.5045 in (1)
  • 1.51 (1)
  • 1.525 in (1)
  • 1.541 (1)
  • 1.56 in (1)
  • 1.604 (1)
  • 1.62 in (1)
  • 1.625 (1)
  • 1.63 in (2)
  • 1.75 in (1)
  • 1.850 in (1)
  • 1.870 in (2)
  • 1.88 in (2)
  • 1.982 in (1)
  • 1/2 in (2)
  • 100 (6)
  • 11.000000000000000 (2)
  • 11.75 (1)
  • 11/16 in (1)
  • 1-1/16 in (4)
  • 1-1/2 in (6)
  • 1-1/4 (1)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 1-11/16 in (2)
  • 1-13/16 in (1)
  • 1-15/16 in (3)
  • 1-27/32 in (4)
  • 13/16 in (2)
  • 1-3/16 in (2)
  • 1-3/4 in (8)
  • 1-3/8 in (2)
  • 1-3/8 in (Strap Center point Length) (2)
  • 14 (1)
  • 144 (1)
  • 15.000000000000000 (1)
  • 15/16 in (4)
  • 1-5/16 in (8)
  • 1-5/8 in (6)
  • 1-7/16 in (1)
  • 1-7/8 in (3)
  • 1-9/16 in (4)
  • 2 in (14)
  • 2.06 in (2)
  • 2.12 in (1)
  • 2.13 in (2)
  • 2.240 in (1)
  • 2.25 in (1)
  • 2.31 in (2)
  • 2.362 (1)
  • 2.390 in (1)
  • 2.405 in (1)
  • 2.5 in (2)
  • 2.56 in (2)
  • 2.725 in (1)
  • 2.75 (1)
  • 2.75 in (1)
  • 2.750 in (1)
  • 2.83 in (1)
  • 2.843 in (1)
  • 2.88 in (1)
  • 2.90 in (1)
  • 2.93 in (1)
  • 2-1/16 in (1)
  • 2-1/2 in (7)
  • 2-1/4 in (6)
  • 2-1/8 in (2)
  • 2-11/16 in (5)
  • 2-11/32 in (2)
  • 2-13/32 in (1)
  • 2-15/16 in (3)
  • 2-3/16 in (1)
  • 2-3/4 in (2)
  • 2-3/8 in (1)
  • 2-5/16 in (2)
  • 2-5/8 in (3)
  • 2-7/16 in (2)
  • 2-7/8 in (3)
  • 2-9/16 in (2)
  • 3 in (2)
  • 3.063 in (2)
  • 3.13 in (1)
  • 3.25 in (1)
  • 3.250 in (1)
  • 3.340 in (1)
  • 3.35 in (1)
  • 3.44 in (1)
  • 3.5 in (1)
  • 3.62 in (1)
  • 3.69 in (1)
  • 3.75 (1)
  • 3.75 in (2)
  • 3.765 in (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 30 (4)
  • 3-1/16 in (1)
  • 3-1/2 in (2)
  • 3-1/4 in (4)
  • 3-3/16 in (2)
  • 3-3/4 in (4)
  • 3-3/8 in (2)
  • 3-5/16 in (2)
  • 3-5/8 in (1)
  • 3-7/32 in (4)
  • 39.3 (1)
  • 3-9/16 in (1)
  • 3-9/32 in (2)
  • 4 (4)
  • 4 in (4)
  • 4.00 in (1)
  • 4.062 (1)
  • 4.07 (1)
  • 4.5 in (1)
  • 4.56 (1)
  • 4.63 in (1)
  • 4.75 in (1)
  • 4.750 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/4 in (3)
  • 4-1/8 in (1)
  • 4-13/16 in (2)
  • 4-23/32 in (2)
  • 4-3/16 in (1)
  • 4-3/32 in (2)
  • 4-3/4 in (2)
  • 4-3/8 in (2)
  • 4-5/16 in (1)
  • 4-7/16 in (1)
  • 4-7/8 in (3)
  • 5 (2)
  • 5.000 (1)
  • 5.250 (1)
  • 5/8 in (3)
  • 5-1/2 in (1)
  • 5-1/4 in (1)
  • 5-11/16 in (1)
  • 55 yd (1)
  • 5-5/8 in (2)
  • 5-7/16 in (1)
  • 6 in (2)
  • 6 in (Lead) (2)
  • 6.5 in (1)
  • 60 (20)
  • 60 ft (2)
  • 6-1/2 in (2)
  • 6-1/4 in (1)
  • 6-3/16 in (1)
  • 66 (11)
  • 6-7/8 in (1)
  • 7/16 in (1)
  • 7/8 in (3)
  • 72 (2)
  • 720 (1)
  • 8 (1)
  • 8 in (1)
  • 9/16 in (2)
  • Show More...

• Color

  

  • Aluminum (24)
  • Beige (5)
  • Black (142)
  • Black Lettering - Orange Background (1)
  • Blue (41)
  • Blue (Handle);Black (Blade) (1)
  • Brass (1)
  • Brass Pull Chain (1)
  • Bronze (1)
  • Brown (28)
  • Clear (17)
  • Clear/Transparent (2)
  • Copper (24)
  • DAWN MIST (2)
  • Gray (43)
  • Gray;Grey (1)
  • Green (28)
  • Grey (4)
  • Grey with Black Insulator (28)
  • Ivory (7)
  • Light Grey (1)
  • OLIVE (2)
  • Orange (11)
  • Pink (14)
  • Pink (Main) - Pink (Tap) (1)
  • Purple (11)
  • Red (46)
  • Red (Main) - Red (Tap) (1)
  • Red, Blue, Yellow (1)
  • Red/Tan (1)
  • RED/YELLOW (1)
  • Red;Tan (1)
  • Red;Yellow (1)
  • RUBY (2)
  • Silver (11)
  • Steel (2)
  • Tan (8)
  • Tan, Yellow, Red, & Blue (1)
  • Tin Plated Copper (12)
  • Violet (3)
  • White (43)
  • Yellow (53)
  • Yellow (Handle) (1)
  • Yellow;Black (2)
  • Show More...

• Shape

  

  • Angle (7)
  • Hex (9)
  • Round (66)
  • Square (1)
  • Straight (16)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (3)
  • #1 AWG (Solid);2/0 AWG (Stranded) (1)
  • #1 AWG (Solid);4/0 AWG (Stranded) (1)
  • #1 AWG (Stranded) (1)
  • #1/0 AWG (2)
  • #10 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #12 AWG (3)
  • #2 AWG (4)
  • #2 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #2 AWG (Stranded) (3)
  • #4 AWG (7)
  • #4 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #4 AWG (Stranded) (1)
  • #4 AWG (Stranded);#14 AWG (Solid) (1)
  • #6 AWG (6)
  • #6 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #6 AWG (Stranded) (1)
  • #8 AWG (2)
  • #8 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #8 AWG;#10 AWG (1)
  • (1) #10 AWG;(2) #14 AWG;(1) #16 AWG (1)
  • (1) #8 AWG;(3) #10 AWG (1)
  • (3) #10 AWG (2)
  • (3) #12 AWG (2)
  • (3) #16 AWG (2)
  • (4) #12 AWG (2)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (5)
  • 1/0 AWG (6)
  • 1/0 AWG (Stranded) (1)
  • 1/0 AWG (Stranded);#4 AWG (Solid) (1)
  • 2/0 AWG (4)
  • 2/0 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 2/0 AWG (Stranded) (2)
  • 250 MCM (11)
  • 250 MCM (Range of Equal Main and Tap-Stranded);1/0 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 3/0 AWG (7)
  • 3/0 AWG (Stranded) (1)
  • 300 MCM (1)
  • 350 MCM (6)
  • 500 MCM (9)
  • 600 kcmil (1)
  • 600 MCM (3)
  • 750 MCM (2)
  • Show More...

• Diameter

  

  • 0.406 in (1)
  • 0.618 in (1)
  • 0.938 in (1)
  • 0.94 in (2)
  • 0.975 in (4)
  • 1 in (3)
  • 1 in (1 Hole);7/8 in (2 Hole);1-5/16 in (3 Hole) (1)
  • 1 in (Inside);1-1/2 in (Outside) (1)
  • 1 in (Inside);1-11/16 in (Outside) (1)
  • 1 in (Inside);2-3/16 in (Outside) (1)
  • 1.065 in (1)
  • 1.08 in (1)
  • 1.19 in (2)
  • 1.220 in (2)
  • 1.312 in (2)
  • 1.44 in (3)
  • 1.478 in (1)
  • 1.562 in (1)
  • 1.69 in (1)
  • 1.878 in (1)
  • 1.88 in (2)
  • 1.880 in (1)
  • 1/2 in (2)
  • 1/2 in (ID) (2)
  • 1-1/16 in (5)
  • 1-1/16 in (Inside);1-3/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-1/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-1/16 in (Inside);3-1/4 in (Outside) (1)
  • 1-1/2 in (5)
  • 1-1/32 in (4)
  • 1-1/4 in (3)
  • 1-1/8 in (13)
  • 1-11/16 in (6)
  • 1-11/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-11/16 in (Inside);3-1/4 in (Outside) (2)
  • 1-13/16 in (1)
  • 1-15/16 in (5)
  • 1-15/16 in (Inside);2-7/8 in (Outside) (1)
  • 1-17/32 in (6)
  • 1-29/32 in (1)
  • 13/16 in (1)
  • 1-3/16 in (2)
  • 13/16 in (Inside);1-1/2 in (Outside) (1)
  • 13/16 in (Inside);1-1/8 in (Outside) (1)
  • 13/16 in (Inside);1-11/16 in (Outside) (1)
  • 13/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-3/4 in (5)
  • 1-3/4 in (3 Hole);1-1/8 in (4 Hole) (2)
  • 1-3/8 in (8)
  • 1-3/8 in (Inside);2-1/4 in (Outside) (1)
  • 1-3/8 in (Inside);2-5/8 in (Outside) (1)
  • 1-3/8 in (Inside);3-1/4 in (Outside) (1)
  • 15/16 in (3)
  • 1-5/16 in (6)
  • 1-5/16 in (Inside);1-11/16 in (Outside) (1)
  • 1-5/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-7/16 in (5)
  • 1-7/8 in (2)
  • 1-9/16 in (2)
  • 1-9/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-9/32 in (2)
  • 2 in (4)
  • 2 in (Inside);3-1/4 in (Outside) (2)
  • 2.06 in (1)
  • 2.08 in (1)
  • 2.090 in (1)
  • 2.113 in (1)
  • 2.18 in (1)
  • 2.375 in (1)
  • 2.390 x 1.188 x 1.375 in (1)
  • 2.44 in (1)
  • 2.5 in (1)
  • 2.56 in (1)
  • 2.563 in (1)
  • 2.750 in (1)
  • 2.94 in (1)
  • 2-1/16 in (2)
  • 2-1/2 in (1)
  • 2-1/2 in (Inside);4-1/2 in (Outside) (2)
  • 2-1/2 in (Inside);5-1/2 in (Outside) (1)
  • 2-1/4 in (2)
  • 2-1/8 in (4)
  • 2-11/16 in (4)
  • 2-13/16 in (1)
  • 2-15/16 in (3)
  • 2-15/16 in (Inside);4-1/2 in (Outside) (1)
  • 2-3/16 in (2)
  • 2-3/8 in (4)
  • 2-5/16 in (Inside);3-1/2 in (Outside) (1)
  • 2-5/32 in (3)
  • 2-5/8 in (7)
  • 2-7/16 in (1)
  • 2-7/8 in (2)
  • 2-9/16 in (3)
  • 3 in (1)
  • 3.25 in (1)
  • 3.26 in (1)
  • 3.62 in (1)
  • 3.89 in (2)
  • 3/8 in (1)
  • 3/8 in (2 Hole);7/16 in (3 Hole) (1)
  • 3-1/8 in (2)
  • 3-11/16 in (2)
  • 3-13/16 in (1)
  • 3-13/64 in (1)
  • 3-3/16 in (4)
  • 3-3/4 in (1)
  • 3-3/8 in (3)
  • 3-5/16 in (1)
  • 3-7/16 in (2)
  • 3-7/8 in (1)
  • 3-9/16 in (Inside);5-1/2 in (Outside) (1)
  • 4.25 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/32 in (2)
  • 4-1/8 in (2)
  • 4-13/16 in (5)
  • 4-5/16 in (4)
  • 4-5/8 in (1)
  • 4-7/16 in (1)
  • 4-7/8 in (1)
  • 5 in (2)
  • 5.25 in (1)
  • 5.75 in (1)
  • 5/16 in (1)
  • 5/8 in (Inside);1-1/8 in (Outside) (1)
  • 5/8 in (Inside);2-3/16 in (Outside) (1)
  • 5/8 in (Inside);7/8 in (Outside) (1)
  • 5-1/4 in (1)
  • 5-1/8 in (3)
  • 5-3/8 in (2)
  • 7/16 in (1 Hole);5/8 in (2 Hole);3/4 in (3 Hole) (1)
  • 7/16 in (2 Hole);1/2 in (3 Hole) (1)
  • 7/16 in (2 Hole);5/8 in (3 Hole) (1)
  • 7/8 in (4)
  • 7/8 in (Inside);1-1/2 in (Outside) (1)
  • 7/8 in (Inside);1-3/4 in (Outside) (1)
  • 7/8 in (Inside);2-1/4 in (Outside) (1)
  • 7/8 in (Inside);2-5/8 in (Outside) (1)
  • 7/8 in (Inside);3-1/4 in (Outside) (1)
  • 9/16 in (1)
  • 9/16 in (1 Hole);3/4 in (2 Hole);1 in (3 Hole) (1)
  • Show More...

• Current Rating

  

  • 0.065 AMPERE (1)
  • 15 A (1)
  • 175 A (3)
  • 20 A (2)
  • 310 A (2)
  • 350 A (4)
  • 380 A (2)
  • 40 A (7)
  • 40 A (NO) @ 120 to 277 V ac (General Purpose);30 A (NO) @ 120 V ac;20 A (NO) @ 208 to 277 V ac (Ballast);15 A (NO) @ 120 V ac (Tungsten);30 A @ 28 V dc (Resistive);40 A (NO) @ 120 to 277 V ac (Inductive) (3)
  • 5 A (1)
  • 620 A (1)
  • 760 A (3)
  • Show More...

• Connection Size

  

  • 1 in (4)
  • 1/2 in (3)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 2 in (2)
  • 2-1/2 in (2)
  • 3 in (2)
  • 3/4 in (3)
  • 4 in (2)
  • Show More...

• Voltage Rating

  

  • 1000 V (8)
  • 105 to 130 V ac (1)
  • 105-305 (2)
  • 120 to 277 V ac (4)
  • 120 to 480 V ac (1)
  • 120 V (5)
  • 120 V ac (5)
  • 120 V ac @ 60 Hz (2)
  • 120 VAC (3)
  • 120/208/240/277 V ac (1)
  • 125 to 277 V (1)
  • 125 V (1)
  • 125 V ac;250 V ac (1)
  • 125/250/277 V ac (7)
  • 125-250 VAC (6)
  • 208 to 277 V (4)
  • 208 to 277 V ac (1)
  • 208 to 277 V ac @ 60 Hz (1)
  • 24 V dc (1)
  • 277 V (1)
  • 277 V ac (1)
  • 300 (4)
  • 300 V (43)
  • 300V (1)
  • 35 (1)
  • 480 V ac (1)
  • 480/120 V ac @ 60 Hz (1)
  • 600 (23)
  • 600 V (352)
  • 600 V to 35 KV (1)
  • 600V (6)
  • Show More...

• Insulation Material

  

  • Aluminum (4)
  • Bronze (1)
  • Copper (3)
  • EPDM Rubber (2)
  • Flame Retardant Polycarbonate (3)
  • Plastisol (36)
  • Silicon Bronze (32)
  • Silicone Bronze (4)
  • Thermoplastic (17)
  • Vinyl (1)
  • Zinc Alloy (1)
  • Show More...

• Conductor Material

  

  • Aluminum (5)
  • Aluminum;Copper (19)
  • Brass/Stainless Steel (1)
  • Brass/Stainless Steel/Steel (2)
  • Copper (54)
  • Copper/Aluminum (9)
  • Copper;Aluminum (26)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • Copper;Tin Plated Stainle (3)
  • Die-Cast Zinc/Steel (1)
  • Show More...

• Insulation Color

  

  • Black (37)
  • Blue (7)
  • Bronze (1)
  • Brown (2)
  • Brown (Code) (1)
  • Clear (1)
  • Gray (9)
  • Gray (Code) (1)
  • Green (3)
  • Orange (2)
  • Pink (1)
  • Purple (3)
  • Red (7)
  • Red;Blue;Yellow (1)
  • Silver (2)
  • Tan (2)
  • Tan;Yellow;Red;Blue (1)
  • Yellow (5)
  • Show More...

• Width

  

  • .75 (31)
  • .750 (1)
  • 0.165 (1)
  • 0.187 (1)
  • 0.187000000000000 (2)
  • 0.300000000000000 (1)
  • 0.311 (1)
  • 0.522 (1)
  • 0.525 in (1)
  • 0.537 in (1)
  • 0.576 (1)
  • 0.61 in (1)
  • 0.625 in (2)
  • 0.63 in (2)
  • 0.635 in (1)
  • 0.75 (4)
  • 0.75 in (6)
  • 0.88 in (2)
  • 0.953 in (1)
  • 1 (1)
  • 1 in (6)
  • 1.07 (1)
  • 1.188 in (1)
  • 1.205 in (1)
  • 1.21 in (1)
  • 1.218 in (1)
  • 1.225 (1)
  • 1.23 in (1)
  • 1.24 in (1)
  • 1.25 in (2)
  • 1.375 (1)
  • 1.468 in (1)
  • 1.470 in (1)
  • 1.5 (4)
  • 1.625 (1)
  • 1.875 in (1)
  • 1.9 in;50 mm (1)
  • 1/2 in (3)
  • 1/4 in (1)
  • 1/8 in (2)
  • 11/16 in (2)
  • 1-1/2 in (2)
  • 1-1/4 in (10)
  • 1-1/8 (1)
  • 1-13/16 in (1)
  • 1-15/16 in (2)
  • 13/16 in (4)
  • 1-3/16 in (1)
  • 1-3/8 in (3)
  • 1-5/16 in (1)
  • 1-5/8 in (4)
  • 1-7/8 in (1)
  • 1-9/16 in (1)
  • 2 (3)
  • 2 in (2)
  • 2.125 in (1)
  • 2.25 (1)
  • 2.5 in (1)
  • 2.656 in (1)
  • 2-1/2 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (2)
  • 2-3/16 in (1)
  • 2-3/8 in (3)
  • 2-7/16 in (1)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 3.187 in (1)
  • 3.5 (1)
  • 3/16 in (8)
  • 3/8 in (1)
  • 3-1/16 in (1)
  • 3-1/4 in (1)
  • 3-1/8 in (1)
  • 3-11/16 in (1)
  • 3-13/16 in (1)
  • 3-3/8 in (1)
  • 35 (1)
  • 4 (3)
  • 4.125 (1)
  • 4.23 in (1)
  • 4.25 (2)
  • 4.625 (1)
  • 4.75 (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/8 in (1)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 5.1875 (1)
  • 5/8 in (1)
  • 5-3/16 in (1)
  • 5-3/4 in (1)
  • 7/16 in (1)
  • 7/32 in (1)
  • 7/8 in (9)
  • 7-7/16 in (1)
  • 9 in (2)
  • 9/16 in (1)
  • 9/64 in (1)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - CU Splice (2)
  • # 2 AWG (STR) - 1/4 Mounting Hole (2)
  • # 4 AWG (STR) - 1/4 Mounting Hole (2)
  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (3)
  • # 8 AWG (STR) - 3/8 Mounting Hole (2)
  • # 8 AWG (STR) - CU Splice (2)
  • (10) 250 MCM-6 AWG - Dual Rated (1)
  • (12) 350 MCM-6 AWG - Dual Rated - With Mounting Holes (1)
  • (2) 2/0-14 AWG - Dual Rated (1)
  • (2) 2/0-14 AWG (Line Side) - (6) 4-14 AWG (Load Side) - 350 Amps Per Pole (2)
  • (2) 750-250 MCM - Dual Rated (2)
  • (3) 2/0-14 AWG - Dual Rated (1)
  • (5) 1/0-14 AWG - Dual Rated (1)
  • (5) 4-14 AWG - Dual Rated (1)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • (Run) 3/0-4/0 STR - (Tap) 3/0-4/0 STR (1)
  • (Run) 6 SOL-4 STR - (Tap) 4 SOL-4 STR (1)
  • .472 OD-.354 ID - .354-2.56 Bundle Range (2)
  • 1 1/2 Pipe Size IN (2)
  • 1 1/4-2 Pipe Size (1)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 1/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 1/0 AWG (STR) - CU Splice (2)
  • 1/2 Conduit Mount - Time Delay On And Off - Cadmium Sulphide Epoxy Coated 1/2 Diameter Cell IN (3)
  • 1/2 to 1 in Pipe Size - 3/8-1 in Rebar - 1/2 to 1 in Ground Rod (2)
  • 1/2-1 Pipe Size - Clamp Style Hub (1)
  • 10 Replacement Sleeves Per Bag (3)
  • 100kA Short Circuit Current Rated (SCCR), Din Rail Mount with Locking Mechanism to lock/release block on Din Rail, Multi Pole Ganging, Finger Safe Lexan 500R Polycarbonate Panels & Covers. (2)
  • 12/4, 10/2, 10/3, 2/1 (1)
  • 14 STR-8 STR - 100 Pack (1)
  • 14" - 100 Pack - 250 lbs Tensile Strength - Max Bundle Diameter - 3.94" (1)
  • 16-10 AWG - UL94 V-2 - Made From Nylon 66 - 40 Pcs Blister (1)
  • 2 1/2-4 Pipe Size (1)
  • 2 1/2-4 Water Pipe (1)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 20 On-Off Set Points - Daylight Savings Auto - Leap Year Automatic Compensation (2)
  • 20 On-Off Set Points - Daylight Savings Auto - Leap Year Automatic Compensation (4)
  • 250 MCM (STR) - 1/2 Mounting Hole (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 250 MCM (STR) - CU Splice (2)
  • 2-6 AWG - Indoor or Outdoor Use For Power Communication With Cover (2)
  • 3 holes 1-3/4" dia., 4 holes 1-1/8" dia. (3)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (2)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 3/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 3/0 AWG (STR) - CU Splice (2)
  • 3/0-4 AWG - CU Only - 18 Pack (1)
  • 300 MCM (STR) - 1/2 Mounting Hole - 1 3/4 Hole Spacing (1)
  • 300 MCM (STR) - 4/0 Pin Size (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (3)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 4 1/2-6 Water Pipe (1)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 4/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 4/0 AWG (STR) - CU Splice (2)
  • 4/0 AWG Wire Adaptor (1)
  • 400 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 400 MCM (STR) - 300 Pin Size (1)
  • 5/8 Rebar Clamp (1)
  • 5/8 to 3/4 in Rod - 3/8 in Pipe Size (2)
  • 50 Micron Gold Plated Contacts (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (3)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 500 MCM (STR) - CU Splice (2)
  • 6.5 Long 12 AWG Solid With Green Combo Screw - 50 Pack (1)
  • 600 MCM (STR) - 350 CU Pin Size (1)
  • 7 On and Off Pairs of Set Points Each Day-Asronomic-Random Mode-Daylight Saving (2)
  • 750 MCM (STR) - 500 Pin Size (2)
  • 750-250 MCM - Dual Rated (1)
  • A Groove-3 4 6 6 (ACSR) - 2 3 4 (STR) - 1 2 3 4 (SOL) - B Groove- 8 10 12 14 (STR) - 8 10 12 14 (SOL) (1)
  • A Groove-4 6 (ACSR)-3 4 6 (STR)-2 3 4 6 (SOL) - B Groove-4 6 (ACSR)-3 4 6 (STR)-2 3 4 6 (SOL) (1)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Accepts cable diameters from 0.10" to 0.43" (2.5mm - 11mm).;Removes cable jackets from: Twisted pair (shielded & unshielded) cables, Single and multi-core cables (shielded & unshielded), and Fiber optic cable;Self-adjusting (1)
  • Ball Burnished, mirror smooth finish (11)
  • Ball Type Swivel Fixture (2)
  • Black Color, rated 150 degree C. (9)
  • Box 150 Watt 1/2 Vaportite (1)
  • Bridgeport Fittings Products are safety listed to ensure code compliance. With our wide selection of fittings, Bridgeport has a connector, coupling or transition fitting to meet your needs. (3)
  • Built-In Cutter and Stripper for Flat and Round Cable;Full Surface to Surface Contact Delivers Uniform Crimp Force (1)
  • Clamp Type Connector (4)
  • Comes with Carriage Bolt and Nut (3)
  • Compact Design (3)
  • Concrete Tight (25)
  • Concrete Tight/Raintight (2)
  • Concretetight (9)
  • Concrete-Tight (58)
  • Concrete-tight when taped (4)
  • Concrete-tight/Raintight (6)
  • Concretetight;Raintight (6)
  • Concrete-Tight;Raintight (26)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (11)
  • Corrosion Resistant (3)
  • Does not require trimming and is completely hidden by faceplate (3)
  • Double Male Tabs .250 x .032 - 15 Pack (1)
  • DPST 24 Hour Time Switch - Same Day On-Off Times Each Day (4)
  • Dual Rated For Use With Copper And Aluminum Cable (2)
  • Duplex (1)
  • Easy Roll-On Way To Insulate And Seal Cable - Made Of EPDM Elastomer (2)
  • Electro-Tin Plated for Low Contact Resistance (6)
  • Ergonomic Comfort Grip Handle (1)
  • Excellent Adhesion and Elasticity, All Weather Performance, High Tensile Strength, Resistant to UV, Abrasion and Corrosion, Flae-Retardant. (10)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Excellent for Grounding and Continuous loop Applications;Made of 6061T-6 Aluminum Alloy (2)
  • Extremely Flexible with Good Adhesion and Conformability (2)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (3)
  • Fire Rating upto 2 hr (1)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (17)
  • Flexible Skirt covers over strip and conforms to fit into tight spaces - Fixed precise square wire spring provides secure gripping of conductors - Flame retardant UL 94V-2 thermoplastic shell provides excellent electrical insulation - Zinc-plated spring for low contact resistance (4)
  • Flush Mount With Gasket And Nut Supplied (2)
  • For both indoor and outdoor use (2)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For dry locations only. Max wire fill is 60% or 0.137 sq. inches. (1)
  • For Fitting a Tork Mchanism Into An Already Installed Intermatic Case (1)
  • For Rigid and IMC Conduit (19)
  • For Service Entrance (2)
  • For use in Wet Locations in Canada Only (9)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Full Serrated Bottom Blade for Non-Slip Cutting;Scraper and File on Backside of Blades;Stripping Notches for 19 & 23 AWG Wire (1)
  • Furnished with 2-way Phillips/Slotted Head Screw (35)
  • Furnished with Tri-Drive screw (8)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (13)
  • Furnished with Tri-Drive Slotted/Phillips/Robertson Screw (5)
  • Galvanized - for use with galvanized, plastic, or cast iron electrical service mast (4)
  • Galvanized for superior corrosion resistance. (2)
  • Good Ahesion and Elasticity, All Weather Performance, Great Tensile Strength, Resistant Tto UV, Abrasion and Corrosion, Falme-Retardant. (10)
  • Grounding Lug Wire Capacity # 14 - #4 (5)
  • Grounding Lug Wire Capacity # 4 - #1/0 (3)
  • Grounding Lug Wire Capacity #14 - #1/0 (2)
  • Grounding Lug Wire Capacity #14 - #1/0;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (7)
  • Grounding Lug Wire Capacity #14 - #4;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (3)
  • Grounding Lug Wire Capacity #6 - #250 MCM (4)
  • Grounding Lug Wire Capacity #6 - 250MCM (2)
  • HCF (4)
  • Hcf/Hcfmci-A (9)
  • Heavy Duty Handle (1)
  • Heavy duty material and zinc plating thickness (13)
  • High Quality Unvulcanized Rubber;Conforms to Irregular Shapes and is Flexible to Withstand Expansion and Contraction (1)
  • High Strength Solderless Service Connector (7)
  • Hole Diameter 3/16" (2)
  • Hole diameter is 0.265" (5)
  • Install by Snapping Cable into Place, then Snapping Connector into the Box;No Tools Required (1)
  • Install from outside or inside outlet box or enclosure. (2)
  • Insulated Bushing (10)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 °C (5)
  • Insulator Rated 105 degree C (2)
  • Integral internal spring steel locking tabs fasten cable or conduit. Suitable for maintaining grounding continuity when installed in accordance with NEC. (3)
  • Ivory 12 Hour No Hold In Wall Time Switch (1)
  • Ivory 30 Minute No Hold in Wall Time Switch (1)
  • Ivory 60 Minute No Hold in Wall Time Switch (1)
  • K.O. Size 1/2" (2)
  • Knockout Bushing (6)
  • Liquid Tight and Water Tight Protection (6)
  • Listed for use with AC / AC90 / ACG90 / MC / MCI-A / HCFMCI-A / MC-PCS Cable*. cETLus Listed. (4)
  • Long Barrel;High Conductivity (11)
  • Low Profile (3)
  • Made in US (1)
  • Made of High Copper Alloy;Re-usable (3)
  • Made with Vinyl Impregnated Cloth, strong adhesive ensures marking will last (2)
  • Main-4/0(ACSR) 4/0(STR) Pink - Tap - 4/0(ACSR) 4/0(STR) Pink (1)
  • Malleable Iron Body with Steel Ferrule (6)
  • Marked with Die Index and Color Coded (2)
  • Max load is 1000 lbs (3)
  • Minimum enclosure plate thickness 14 Guage (0.074 inches) (1)
  • Minimum enclosure plate thickness 16 Gauge (0.062 inches) (1)
  • Neoprene - for use with copper, cast iron, galvanized, or plastic pipe. (2)
  • No Hold 60 Minute Commercial Grade in Wall Time Switch (3)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • Non-Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Non-Insulated Ring Terminal 6 AWG - 50 Pack (3)
  • Non-Insulated Ring Terminal 8 AWG - 50 Pack (2)
  • Nylon Fully Insulated Female Disconnect 16-14 AWG - 50 Pack (1)
  • Nylon Fully Insulated Female Disconnect 22-18 AWG - 50 Pack (1)
  • Nylon Insulated 12-10 AWG - 50 Pack (1)
  • Nylon Insulated 16-10 AWG 100 Pack (1)
  • Nylon Insulated 22-18 AWG - 100 Pack (1)
  • Nylon Insulated Locking Spade Terminal 12-10 AWG - 50 Pack (1)
  • Nylon Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Nylon Insulated Ring Terminal 8 AWG - 50 Pack (1)
  • Nylon Insulated Spade Terminal 16-14 AWG - 100 Pack (1)
  • Nylon Insulated Spade Terminal 16-14 AWG - 100 Pack (1)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • One Hole Strap (10)
  • Pail Includes Winged (70) Tan;(80) Yellow;(45) Red;(20) Blue (1)
  • Parallel (2)
  • Plain Finish (7)
  • Plastic Insulator Rated 105 Degree C (6)
  • Polyethylene with Steel Retainer (8)
  • Protect the connector; Prevent tangled messes; Eliminate broken release/locking tabs; Relieve stress on cable; Help maintain radius bend; Color code designated; Cover the external ground on shielded connectors; Max Cable OD: From 0.217; Manufactured from ABS material. (1)
  • Provides positive visual identification and can withstand the harshest environmental conditions. (3)
  • Provides raintight seal (10)
  • Quick Install E-Z Lock (2)
  • Raintight (13)
  • Raintight/Concrete-Tight (2)
  • Removable aluminum cover to facilitate wire pulling (2)
  • Removable cover and neoprene gasket facilitate wire pulling (4)
  • Right Angle (6)
  • Roof Flashing RF-200 (1)
  • Rounded Surface of Bushing (10)
  • Rust Resistant Case (1)
  • Saves Conductor - Drop Wire May Be Cut to Exact Length (1)
  • Set Screw type transition fitting ideal for commercial and institutional facilities. (2)
  • Single Screw Beam Clamp Insulator (3)
  • Single Screw Connector (1)
  • SPDT Percentage Timer - 960 Time Combinations With Two Dials (1)
  • Specify Mechanism Only;with Bracket (1)
  • Spring Action;Comfort Grip Vinyl Handle (1)
  • SPST 24 Hour Time Switch - Same Day On-Off Times Each Day (4)
  • Standard Barrel;High Conductivity (2)
  • Standard Screw-On Type Trippers for 1100, 7000, 1800 Series Time Clocks (1)
  • Steel Crimp Sleeves - 100 Pcs Blister (2)
  • suitable for EMT/Rigid/IMC (3)
  • Sunlight Resistant;Connectors Simply Screw Onto Cable;No Tools Required (1)
  • Superior Adhesion and Elasticity, Extreme Weather Performance, Excellent Tensile Strength, Highly Resistant to UV, Abrasion and Corrosion. (11)
  • Tapered (NPT) Threads (2)
  • Tapered Threads (NPT) and Furnished Plastic KO Seal Provide "Raintight" Resistance (1)
  • Tests to T568A/B wiremap configuration: shorts, opens, miswires, reverses and split pairs. Single-ended Testing for Shorts & Split Pairs. Measures Length in Feet/Meters. Identifies cable location on active ports using flashing Port Link Light. Easy to read, backlit LCD screen with large icons, glow-in-thedark keypad and built-in LED flashlight for use in dark areas. Identify up to 20 network or coax cable runs at a time. Audible Tone Generator, 4 selectable cadences. (1)
  • The Dual Internal sealing rings create a raintight seal. (4)
  • Three Selectable Modes (Automatic On/Off, Energy Saving Walk Through, And Test) (2)
  • Twist on F Connector for Standard Shield RG6-U Cable (1)
  • Two Hole Strap (9)
  • Two Screw Connector (2)
  • UL Type 4 Water Tight (6)
  • Use to compensate plus or minus 2" lateral movement of conduit in dry locations (5)
  • Used in harsh vibration environments (8)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Vinyl Insulated 12-10 AWG - 50 Pack (1)
  • Vinyl Insulated 16-10 AWG - 100 Pack (1)
  • Vinyl Insulated 22-18 AWG - 100 Pack (1)
  • Vinyl Insulated Locking Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Locking Spade Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Locking Spade Terminal 22-18 AWG - 100 Pack (1)
  • Vinyl Insulated Ring Terminal 12-10 AWG - 50 Pack (5)
  • Vinyl Insulated Ring Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Ring Terminal 22-18 AWG - 100 Pack (4)
  • Vinyl Insulated Ring Terminal 8 AWG - 250 Pack (2)
  • Vinyl Insulated Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Spade Terminal 16-14 AWG - 100 Pack (2)
  • Vinyl Insulated Spade Terminal 22-18 AWG - 100 Pack (2)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • White 30 Minute No Hold in Wall Time Switch (1)
  • White 60 Minute No Hold in Wall Time Switch (1)
  • With Bolt (14)
  • With Bridgeport’s newly redesigned Raintight Compression Couplings, 266-RT through 269-RT, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. (2)
  • With Cover (3)
  • Show More...

• For Use With

  

  • #22 to #12 AWG Solid;Stranded Wire (3)
  • 1/2 in EMT;14/2 and 12/2 Romex Non-Metallic Cable (1)
  • 14/2 to 10/3 AWG (0.40 in to 0.63 in) Aluminum and Steel AC/MC/MCI-A/HCF;3/8 in Aluminum and Steel FMC/RWFMC (1)
  • AC/MC Cable (9)
  • AC/MC/HCF Cable 10/4 AWG(0.61 in) to 8/3 AWG (0.87 in) (1)
  • AC/MC/MCI-A 14/2 AWG (0.375 in) to 10/3 AWG (0.625 in) HCF/HCFMCI-A 3/8 in FMC and 14/2 to 10/3 AWG NM Cable (1)
  • AC/MC/MCI-A/HCF/HCFMCI-A/FMC .40-.62 Cable to Box/Enclosure (1)
  • Aluminum or Steel Electrical Metallic Tubing (9)
  • Box;Enclosure (32)
  • Connect AC/MC/MCI-A/NM-B Cable to Box or Enclosure;12/2 AWG(0.44 in) to 10/3 AWG (0.53 in) For use with HCF/HCFMCI-A (1)
  • Connect MC &AC or 3/8 in Flexible Metal Conduit to box or enclosure;14/2 AWG (0.38 in) to 10/3 AWG (0.61 in)AC/MC/MCI-A/HCF/HCFMCIA (1)
  • Connect Single Round Service Entrance Cable to Box or Enclosure (5)
  • Connecting 14/2 AWG (0.38 in) to 10/3 (.53 in) Armored;Metal Clad Cable to Box or Enclosure MC/MCI-A/HCFMCI-A (1)
  • Connecting 14/2 to 10/3 Aluminum or Steel AC/MC Cable or 3/8” Flexible Metal Conduit to a Box/Enclosure. Patent Pending (2)
  • Connecting EMT to Box or Enclosure (6)
  • Connecting Nonmetallic Cable to Box or Enclosure (6)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper and Aluminum Conductor (2)
  • Copper Cables;Aluminum Cables (6)
  • Copper or Aluminum Conductors (2)
  • Copper Wire (3)
  • Decorative Ligting (3)
  • Electrical Service Mast;Galvanized Electrical Service Mast;Plastic Electrical Service Mast;Cast Iron Electrical Service Mast (1)
  • Electrical;Telecommunications Cable (6)
  • EMT and Rigid Conduit (8)
  • EMT and Rigid Conduit to Threaded Rod (16)
  • EMT Conduit (52)
  • EMT to Box or Enclosure (7)
  • EMT to Flexible Metal Conduit (1)
  • EZ-RJ45 Crimp & Trim System;EZ-RJ45 CAT5e Connectors;EZ-RJ45 Shielded CAT5e Connectors;EZ-RJ45 CAT6 Connectors;EZ-RJ12/11 Connectors and All Other RJ45, RJ12 and RJ11 Modular Plug Connectors Except Amp (1)
  • Fasten Threaded Connectors/Nipples to Box/Enclosure (1)
  • Fasten Threaded Rigid/IMC Conduit to Box/Enclosure (10)
  • Flexible Metal Conduit (14)
  • Flexible Metal Conduit;12/3 to 10/3 steel or aluminum MC cable (2)
  • Flexible Metal Conduit;EMT (2)
  • Gas or Electric Heating Device (2)
  • Grounding Wire (19)
  • Inspection;Pulling and Maintenance (5)
  • Join EMT to Box or Enclosure (6)
  • Locknut;Box or Connector (10)
  • Maintenance Cart (1)
  • Mechanical Time Switch (1)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic or Nonmetallic Electrical Boxes (2)
  • Mounting Pendant Or Fluorescent Lighting Fixtures to Ceiling Box (1)
  • Non-Metallic "type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut (1)
  • Nonmetallic Type B Liquid Tight Conduit (2)
  • Occupancy or Light Sensors (1)
  • Offset the Axis of Raceway 3/4" (6)
  • Pipe (2)
  • Pole Lanterns-Lawn Lighting (3)
  • Portable Cord (6)
  • Protection of Electrical;Voice;Data and Video Cables (1)
  • Pump;Water heaters;Fans (1)
  • Rigid and IMC Conduit (32)
  • Rigid Conduit;IMC Conduit (10)
  • Rigid Service Entrance Conduit to Box or Enclosure (1)
  • Rigid/IMC Conduit;Solar and other Outdoor Installations (1)
  • Rigid;IMC and EMT conduit (1)
  • Secure Emt to Box or Enclosure (9)
  • Secure Steel EMT to Box or Enclosure;Concrete-Tight when Taped (6)
  • Service Entrance Mast (2)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/2 AWG (0.475 in) to 12/2 AWG (0.525 AWG) (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/3 AWG (0.540 in) to 12/3 AWG (0.590 AWG) (1)
  • Splicing Two Copper or Aluminum Wire (2)
  • Standard Shield RG6-U Cable (1)
  • Steel and Aluminum EMT (6)
  • Steel and Aluminum EMT;Steel and Aluminum Rigid Conduit (3)
  • Steel;Aluminum EMT (3)
  • Steel;Aluminum Rigid Conduit (2)
  • Street-Highway Lighting (1)
  • Support EMT to Mounting Surface (2)
  • Support Metal Clad Cable (1)
  • Supporting AC/MC/FMC;Accomodates Steel and Aluminum AC/MC/FMC;AC/MC/MCIA with an Outer Diameter of 0.425 in (14/2 AWG) to 0.61 in (10/3 AWG) in FMC in 3/8 in Trade Size (1)
  • Terminate Service Conduit to Cabinet (11)
  • Terminate;Splice;Tap Power Connector (1)
  • Terminate;Splice;Tap Power Connectors (18)
  • Threaded Conduit (1)
  • Time Switch;24 Hour Dial (1)
  • To Join EMT to Box or Enclosure (29)
  • Turn Lock Photocontrol (1)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (4)
  • Used to Connect Non-Metallic Cable to Box or Enclosure (4)
  • Used to Join Steel Emt to Box or Enclosure;Concrete-Tight 1/2 in Thru 2 in Suitable for use with Steel or Aluminum Emt (9)
  • Wedge Clamps Are Used For Dead-Ending Self Supporting Drop Wire (1)
  • Wire Installation (1)
  • Wire Termination (21)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (15)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Show More...

• Application

  

  • 2 holes 5/8" dia.;3 holes 3/4" dia.;Clamp type entrance cap for rigid conduit and IMC. 1 hole 7/16" dia. (1)
  • 3 holes 1 5/16" dia.;3 holes 7/8" dia.;Clamp type entrance cap for rigid conduit and IMC. 1 hole 1" dia. (1)
  • 3 holes 1/2" dia.;Clamp type entrance cap for rigid conduit and IMC. 2 holes 7/16" dia. (1)
  • 3 holes 5/8" dia.;Clamp type entrance cap for rigid conduit and IMC. 2 holes 7/16" dia. (1)
  • 3 holes 7/16" dia.;Clamp type entrance cap for rigid conduit and IMC. 2 holes 3/8" dia. (1)
  • 4 holes 1 1/8" dia.;Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia. (3)
  • 90 Degree connector for use with metallic liquid tight conduit. (3)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. Insulator rated 105 degree C. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • 90 Degree Connector used to connect Flexible Metal Conduit to box enclosure. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. Diameter for 1.500" 0 min to 1.625" 0 max. (1)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. 12/2 (.560" 0 min) to 10/3 (.610" 0 max) (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. 1.187" 0 min to 1.312" 0 max (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.75" 0 min) (.875" 0 max) (1)
  • 90 Degrees connector suitable to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.875" 0 min) to (1.00" 0 max) (1)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Recommended Cable Types Used to Connect Flexible Metal Conduit to Box or Enclosure. Diameter For (.75" 0 Min) to (.875" 0 Max) (1)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • 90°Connector Suitable For Used to Connect Mc/Fmc to Box or Enclosure. Diameter: 1.50" 0 Min to 1.625" 0 Max (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Diameter (.875" 0 Min) to (1.00" 0 Max) (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Recommended Cable Types: 1.187" 0 Min to 1.312" 0 Max (1)
  • 90°Fitting with Cover Recommended Cable Types Used For Connecting Flexible Metal Conduit to Box or Enclosure. 14/4 (.45" 0 Min) to 10/4 (.625" 0 Max). Mc/Mci-A (1)
  • 90°Fitting With Cover Used For Connecting Flexible Metal Conduit to Box or Enclosure (2)
  • 90degree Connector for use with 3/8" Flexible Metal Conduit. Non-Insulated. Recommended cable types: Diameter for 12/2 (.550" 0 min) to 10/3 (.610" 0 max) (1)
  • Adaptor Plate (1)
  • Allows access to the interior of a conduit system for inspection, pulling and maintenance. (11)
  • also suitable for use with nonmetallic sheath cables. May be used on metallic or nonmetallic cabinets and enclosures. Provides neat and positive securement of cables in any position.;For use on wood or steel stud to position and support datacom, video, and/or voice cabling (1)
  • aluminum alloy 60610-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (1)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (2)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (4)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (1)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (1)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (1)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (4)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (2)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (1)
  • Ball type Swivel fixture covers are suitable for mounting pendant or fluorescent lighting fixtures to ceiling box. Maximum 20 degree swing from vertical and 50lb. load. (2)
  • Bridgeport Fittings EZ-Lock 3/4 inch steel connector recommended for cables with an O.D. of .56 - .81 or 10/3 to 6/3 Listed for use with steel and aluminum Flexible Metallic Conduit (FMC) in 1/2 inch trade size. Listed for use with Metal Clad (MC) and A (1)
  • Bridgeport Fittings Mighty-Seal® product line is designed to provide quick and easy raintight connection to EMT raceways. Patented (2)
  • Bridgeport now offers a full line of EMT to FMC/Greenfield Transition Couplings. You no longer need to assemble multiple fittings, or mount a box, to transition between raceways. These couplings provide dimensional flexibility for a raceway system when dropping in to switchgear and transitioning into transformers. Patented (3)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (1)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (3)
  • Bridgeport's LB Conduit Bodies with Integral Raintight Connectors allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • Bridgeport's LLR Conduit Bodies are Type LL/LR Combination conduit bodies with Integral Raintight Connectors. These allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • Cable Bundling (7)
  • Cable Installation (17)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Insulated Throat - 90° C. Patented (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Patented (7)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (5)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (4)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (3)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (2)
  • Compression type steel couplings used to join two lengths of EMT. Concrete Tight. (1)
  • Concrete slab elbows for use in minimum 6" concrete poured or pre-fabricated slabs. (1)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (4)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (2)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • Crimp and Trim System (1)
  • Duty Cycling;Irrigation;Laboratory Experiment;Pumping;Process Control;Ventilating Fan (1)
  • Duty Cycling;Ventilating Fans;Pumping;Irrigation;Process Control;Laboratory Experiments (1)
  • Electrical (2)
  • Enclosure (2)
  • E-Z LOCK® AC/MC/MCI-A and FMC Duplex connector, allows for the connection of two AC/MC cables into one 1/2" knockout. It is also suitable for use with steel and aluminum 3/8" trade size Flexible Metallic Conduit (FMC). Recommended cable types: 14/2 - 10/3 diameter: .42 - .61 (1)
  • For connecting flexible metal conduit to box or enclosure. Screw connector into conduit and snap into electrical box. Patented E-Z LOCK design. (1)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For use with galvanized, plastic, or cast iron electrical service mast. Fits flats to 40 Degrees. (4)
  • For use with most Metallic or Nonmetallic Electrical Boxes. Non-Conductive Extender/Insulator corrects setbacks up to 1" and insulates devices such as GFCI from Metallic Box. (2)
  • Galvanized Steel Reducing Washers Used in Pairs to Reduce Size of Knockout Holes in Box or Enclosure (22)
  • Galvanized steel reducing washers used in pairs to reduce size of knockout holes in box or enclosure. (9)
  • General Purpose;Electrical;Mechanical;Cable Insulation;Wire Bundling;Reinforcing (2)
  • Grounding Wire (46)
  • Hardware For Lugs (4)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Indoor/Outdoor (1)
  • Industrial (12)
  • Inside/outside box mountable. Connector suitable for use with (1) 8/2, 8/3, 6/2 or 6/3 NM-B cable (1)
  • Intersystem Bonding of Power and Communication (2)
  • Large Office Areas-Large Meeting Rooms-Classrooms-Bathroom & Storage Spaces (1)
  • Lighting;Pump;Sign;Air Conditioning;Water Heater;Fan (7)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Tighten all set screws. Patented (6)
  • Mogul style conduit body for use with threaded rigid/IMC conduit allows extra access to inside of raceway for pulling wire. Split diagonal cover and body ensures ease in wire bending. Raintight. (1)
  • Motor-Equipment Control (7)
  • Nail Type Strap to Support EMT to Mounting Surface (1)
  • Nail type strap to support EMT to mounting surface. (2)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • NSI (74)
  • One hole strap for steel or Aluminum Tubing or Coaxial cable. (2)
  • Outdoor Signs Display;Lighting Security;System Heating and Air Conditioning (1)
  • Polyethylene "Redheads" prevent damage to wire installation when placed between the wire and armored sheath. Rated 90 degree C. (3)
  • Porch or Patio Lighting;Interior Lighting;Pool;Entryway (1)
  • Power and Switching for Occupancy or Light Sensors (1)
  • POWER FUSE, CLASS J TYPE; 5-3/4 INCH; UL 248-8, CSA, QPL-WF-1814, CE APPROVAL; 600 VAC VOLTAGE RATING; 1-1/2 INCH DIAMETER; 200000 AMPERE (SYMMETRICAL) INTERRUPTING RATING; 200 AMPERE CURRENT RATING; BLADE TERMINAL TYPE; FAST ACTING CHARACTERISTICS (2)
  • Prevents Water From Seeping Through Roof-For Use With Copper;Cast Iron;Galvanized;Or Plastic Pipe. Fits Up to 45 Degree Angle. Not Recommended For Hot-Mopped or Built Up Roofs. Neoprene - Elastomer Material. (2)
  • Protects cable running through wood stud, from nails and screws. Great for protecting conductors, cables and raceways. (2)
  • Provides space between conduit and mounting surface. For use with Aluminum straps. (2)
  • Provides space between conduit and mounting surface. For use with Malleable Iron or Aluminum straps. (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.25" to 1.50" (2/4 to 3-2/0) (1)
  • Recommended Cable Types to Connect Armored or Metal Clad Cable to Box or Enclosure. (.44 to .61) 12/2 - 10/4 AC/MC/MCIA/FMC/HCF/HCFMCI-A (1)
  • Recommended Cable Types to Connect Corrugated or Interlocked Mc or Ac Cable to Box or Enclosure. 14/4(.44" 0 Min) to 10/4 (.61" 0 Max) Mci-A. 12/2 to 10/4 Ac/Mc/Mcia/Hcf/Hcfmci-A 3/8" Fmc. 14/2 - 10/3 Nm Cable (1)
  • Recommended Cable Types to Connect Mc & Ac Cable or 3/8 Inch Flexible Metal Conduit to Box or Enclosure. 14/2 (.38" 0 Min) to 10/3 (.61" 0 Max) Mci-A/Hcf/Hcfmcia (1)
  • Recommended cable types to connect steel flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. Armored Cable .86" - .92 DIA. (1)
  • Recommended Cable Types to Connect Steel Flexible Metal Conduit or Armored Cable to Box or Enclosure. Armored Cable .86"-.92" Dia (1)
  • Recommended Cable Types to Connect Steel or Aluminum Flexible Metal Conduit or Armored Cable to Box or Enclosure. (.56-.61 Dia.) For 12/3 to 10/3 Steel or Aluminum Mc Cable (1)
  • Recommended Cable Types Used to Connect AC/MC/MCI-A, Diameter for 14/2 (0.43 in 0 Min) to 10/3 (0.62 in 0 Max) (1)
  • Recommended Cable Types With Steel or Aluminum 14/2 (0.43" 0 Min) to 10/3 (0.61" 0 Max) AC or MC Cable or 3/8 in Flexible Metal Conduit to Box or Enclosure (1)
  • Recommended Cable Types With Steel Or Aluminum 14/2 to 10/3 Ac Or Mc Cable, Or 3/8" Flexible Metal Conduit to Box Or Enclosure. Diameter For 14/2 (.43" 0 Min) to 10/3 (.61" 0 Max) (1)
  • Red fire alarm box cover to meet visual identification requirements for fire alarm installations. (1)
  • Red fire alarm box to meet visual identification requirements for fire alarm installations. (2)
  • Reduce strain and sagging of overhead type ACSR Service Entrance Cable. Max load is 1000 lbs. (3)
  • Reduce The Size of Internal Female Threads. 1/2" Thru 2" Steel, 2 1/2" Thru 4" Malleable Iron (15)
  • Residential Interior Lighting-Small Fans and Motors-Appliances (2)
  • Residential;Commercial (1)
  • Secure Conduit Perpendicular to Beam or Channel (4)
  • Serves as a short raceway between enclosures when used with a locknut. (1)
  • Service Entrance (1)
  • Set screw connector used to join EMT to box or enclosure. Insulated Throat 105degreeC (3)
  • Set screw type couplings used to join EMT to flexible metal conduit. (2)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight when taped. (1)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (6)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (3)
  • Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. (3)
  • Sign;Air Conditioning;Lighting;Sump Pump;Ventilating Fan (2)
  • Simply snap cables into connector and snap assembly into electrical box. (3)
  • Single Screw Beam Clamp Insulator Support With Two Threaded Holes (2)
  • Single screw beam clamp insulator support with two threaded holes. UL listed (3)
  • Snap-On Type Strap Used to Support Round Steel or Aluminum Metal Clad Cable (1)
  • Splicing Wire (40)
  • Steel locknut with PVC seal used to provide raintight seal when fastening threaded conduit to unthreaded opening in a box or enclosure. (9)
  • steel plug used to cap unused knockout holes in box or enclosure. (6)
  • Steel Strap Used to Secure Rigid Conduit and IMC to Mounting Surface (7)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with metallic liquid tight conduit. (1)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (7)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • Street-Highway Lighting (4)
  • Support FS Box and Outdoor Lighting Fixture or Similar Devices, per NEC Article 370-23 (1)
  • Supporting 2 runs of AC/MC/FMC. Accomodates Steel and Aluminum AC/MC/FMC/MCIA with an outer diameter of 0.425 (14/2) to 0.61 (10/3) inches FMC in 3/8" trade size. Patented (1)
  • Telecom;Datacom;Security;Electrical (1)
  • Telephone;Computer;Single or Multiple Voice Cables;Video or Data Cables (10)
  • Terminate, Splice, Tap Power Connectors (145)
  • Terminate-Splice-Tap (3)
  • The 250-MBI is used to connect a properly deburred length of EMT raceway to a box, device, panelboard, or similar electrical enclosure. Simply push the fitting on to raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 251-MBI is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 3000-RT Series are compression type connectors used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (2)
  • The 3100-RT Series are compression type couplings used to join unthreaded steel rigid conduit to box or enclosure in a wet location. Available in 1/2" through 2" Trade Sizes. For larger trade sizes, use Bridgeport's 266-RT through 269-RT Raintight couplings. (2)
  • The 4357-DC is used to securely join 1" EMT to three (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti short bushings (1)
  • The 4457-DC is used to securely join 1" EMT to four 14/2 to 10/3 (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti sh (1)
  • The 630-NM2 allows for multiple nonmetallic cables to be installed into a single 3/4" KO. Simply squeeze the tabsto install or remove the cables. Each port can hold One 10/3 through 14/2 cable; or One Oval 10/2, 12/2 or 14/2; or Two Oval 14/3 or 12/3; or Two Oval 10/2 thru 14/2 NM Cables. Patented. (1)
  • The NMCB-3 is provided with nails for use on wood studs or 3/4" thick furring strips to position non-metallic sheath cable. Capable of positioning up to five 14/2 to 10/3 AC or MC cables or two 14/2 NM cables in each of three rectangular slots. May also be used to be attached to metal studs or enclosures, or concrete block with #6 round head screws. Mounts in either horizontal or vertical direction. Low voltage design and unique dimpled slots prevent accidental removal of cables. (1)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance. (18)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. (4)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (2)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (1)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface (2)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Available with or Without Bolt (5)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Strap Has Integral Threads (6)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. With Carriage Bolt and Nut (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertight. Suitable for Aluminum and Steel Rigid Conduit (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertightnants from entering enclosure. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To Support Rigid Conduit and IMC to Mounting Surface (7)
  • To support rigid conduit and IMC to mounting surface. (8)
  • Transition fitting for use between 1/2" EMT to 3/8" Steel and Aluminum FMC, metal clad and armored cable assemblies with O.D. of .43-.61 (14/2 to 10/3 within the specified ranges), as well as 14/2 to 10/3 NM Cables, (2) 14/2 or (2) 12/2 NM Cables stacked, or the following combinations: 14/2 & 12/2, 14/2 & 12/3, 14/3 & 12/2. AC/MC should be prepared to the desired length and fed through the fitting. AC/MC/MCIA and FMC should be inserted until the armor engages with the endstop at the center of the fitting. (1)
  • Type T Combination EMT/Rigid Conduit Body with Cover and Gasket (4)
  • Use with Liquid Tight or Raintight Connectors, or Threaded Conduit (when used with locknuts) (8)
  • Used for Connecting Rigid or IMC to form 90° Bend. Removable Cover and Neoprene Gasket Facilitate Wire Pulling (3)
  • Used in harsh vibration environments to fasten threaded conduit to unthreaded opening in a box or enclosure. (8)
  • Used in place where a grounding bushing and locknut, for bonding connectors inside the box. Perfect for tight locations or fittings with shorter locknut threads. ETL Listed for use with all Bridgeport Fittings connectors. (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed. Patented (4)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed (3)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (2)
  • Used inside bushing to prevent foreign matter from entering conduit Galvanized steel. (2)
  • Used inside bushing to prevent foreign matter from entering conduit. Galvanized steel. (1)
  • Used to bond one continuous length of grounding conductor to an enclosure thru a 1/2" trade size knockout, inside or outside of an enclosure or panel board and provides 3-equipment bonding terminations. Meets the requirement for Intersystem Bonding. Patented (1)
  • Used to bond one continuous length of grounding conductor to an enclosure thru a 3/4" trade size knockout, inside or outside of an enclosure or panel board and provides 3-equipment bonding terminations. Meets the requirement for Intersystem Bonding. Patented (1)
  • Used to connect 14/2-10/3 (.43" - .61") AC/MC/MCI-A/HCF cable and 3/8" FMC to box or enclosure. Just squeeze to insert into the 1/2" K.O. Use with an anti-short bushing. .375"Throat Opening. Great for lighting whips! Patent Pending (1)
  • Used to connect 2 14/2 - 10/2 (.43" - .59") AC/MC/MCI-A/HCF cables and 3/8" FMC to box or enclosure. No Tools Required Just squeeze to insert into the 1/2" K.O Use with an anti-short bushing. .375" Throat Opening. Great for lighting whips! (1)
  • Used to connect EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (1)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (14)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Steel Flexible Metal Conduit to Box or Enclosure (1)
  • Used to connect steel flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to connect two lengths of EMT to form a 90degree bend. Removable Aluminum cover to facilitate wire pulling. (2)
  • Used to fasten threaded connectors or nipples to box or enclosure. (2)
  • Used to fasten threaded Rigid or IMC Conduit to box or enclosure. (12)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT, Raintight. Concrete-Tight. Patented (4)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT. Raintight. Concrete-Tight. (2)
  • Used to join EMT to box or enclosure. Concrete/Raintight (3)
  • Used to join EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (2)
  • Used to join EMT to box or enclosure. Concrete-tight. (2)
  • Used to join EMT to box or enclosure. Concrete tight. (20)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (5)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (6)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. (5)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. Insulator rated 105degree C. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. Insulator rated 105°C. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 2 in Suitable for use with Steel or Aluminum EMT;Wet Locations (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 4 in Suitable for use with Steel or Aluminum EMT;Wet Locations (2)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete/Raintight. Patented (3)
  • Used to join two lengths of EMT. 1/2" through 1 1/4" Concrete-tight, 1 1/2" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with aluminum or steel EMT. (10)
  • Used to join two lengths of EMT. Concrete tight when taped. (6)
  • Used to join two lengths of EMT. Concrete-tight. (10)
  • Used to join two lengths of EMT. Concrete-tight/Raintight. Patented (6)
  • Used to join two lengths of flexible metal conduit. (3)
  • Used to join two lengths of threaded conduit. (7)
  • Used to offset the axis of raceway 3/4 ". (6)
  • Used to offset the axis of raceway 3/4" between enclosure runs. (2)
  • Used to reduce the size of internal female threads. 1/2" thru 2" steel, 2 1/2" thru 4" malleable iron. (4)
  • Used to seal around boxes, flashings and service entries. Compound is pliable, non-corrosive to metals and can be painted. For both indoor and outdoor use. #1003 asbestos-free duct sealing compound. (2)
  • Used to secure conduit perpendicular to beam or channel. (2)
  • Used to Secure EMT to Box or Enclosure (8)
  • Used to secure Rigid/IMC or EMT conduit parallel to beam, channel or angle supports. (2)
  • Used to secure steel EMT to box or enclosure. concrete tight when taped (2)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (3)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (6)
  • Used to secure two lengths of steel EMT. (6)
  • Used to Support EMT to Mounting Surface (12)
  • Used to support EMT to mounting surface. (3)
  • Used With Locknut to Terminate Service Conduit to Cabinet (10)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. (2)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. Grounding lug; aluminum alloy 6061-T6. Plastic metaliner prevents damage to wire insulation. Rated 150 degree C. (4)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. (9)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (11)
  • Ventilating Fans;Hvac;Whirlpools;Self Storage;Motors and Pumps (3)
  • Wet Location (23)
  • When Used with a Locknut, Conduit Nipples Serve as a Short Raceway Between Enclosures (9)
  • Whole House Fan;Indoor/Outdoor Lighting;Bathroom Fan and Light;Self Storage (1)
  • Whole House Fan;Indoor/Outdoor Lighting;Bathroom Fans and Light;Self Storage Control (4)
  • Wire Identification (2)
  • Wire Retainer (3)
  • Wire Splicing (6)
  • Wire Termination (208)
  • Show More...

• Includes

  

  • (2) Screw (11)
  • Clamp (9)
  • NEVERDull(TM) 110 Blade (1)
  • Set Screw (9)
  • Show More...

• Package Quantity

  

  • 1 CA (2)
  • 1 CA;100 PK (1)
  • 1 ct (31)
  • 1 CT;10 PK (10)
  • 1 CT;100 PK (2)
  • 1 CT;12 PK (16)
  • 1 CT;15 PK (2)
  • 1 CT;2 Pk (2)
  • 1 CT;20 PK (2)
  • 1 CT;25 PK (6)
  • 1 CT;3 PK (2)
  • 1 CT;4 Pk (1)
  • 1 CT;5 PK (9)
  • 1 CT;50 Pk (8)
  • 1 CT;6 Pk (5)
  • 1 PK (1)
  • 10 CT (4)
  • 10 CT;100 PK (7)
  • 10 CT;50 PK (6)
  • 10 CT;60 PK (5)
  • 10 PK (7)
  • 10 PK;1 CT (30)
  • 10 PK;2 CT (11)
  • 100 CA (1)
  • 100 CT (16)
  • 100 CT;1000 PK (6)
  • 100 JR (2)
  • 100 PK (37)
  • 100 PK;1 CT (8)
  • 100 PK;10 CT (7)
  • 100 PK;1000 PK (2)
  • 100 PK;25 CT (2)
  • 1000 CA (6)
  • 1000 PK (9)
  • 1000 PK;100 CT (5)
  • 12 CT (12)
  • 12 PK (3)
  • 12 PK;1 CT (2)
  • 120 PK;20 CT (1)
  • 15 CT (1)
  • 15 CT;19 PK (1)
  • 15 PK;1 CT (2)
  • 150 PK (1)
  • 150 PK;15 CT (1)
  • 1500 PK (1)
  • 2 CT (5)
  • 2 PK (1)
  • 20 CT (2)
  • 20 CT;100 PK (1)
  • 20 CT;120 PK (1)
  • 20 PK (1)
  • 20 PK;1 CT (9)
  • 20 PK;100 PK (1)
  • 200 PK (8)
  • 200 PK;20 CT (1)
  • 200 PK;50 CT (2)
  • 200 STD PK;20 CT (1)
  • 2000 PK;20 CT (1)
  • 20000 DR (1)
  • 24 CT (2)
  • 24 RL/CA (1)
  • 25 CT (21)
  • 25 CT;100 PK (5)
  • 25 CT;250 PK (17)
  • 25 PK (14)
  • 25 PK;1 CT (25)
  • 25 PK;100 PK (1)
  • 250 PK (6)
  • 250 PK;25 CT (14)
  • 2500 CA (1)
  • 2500 PK (1)
  • 3 CT (17)
  • 3 PK (1)
  • 30 PK (1)
  • 30 PK;5 CT (1)
  • 300 JR (2)
  • 4 CT (8)
  • 40 CT (1)
  • 40 PK (4)
  • 40 PK;10 CT (2)
  • 5 CT;200 PK (1)
  • 5 CT;25 PK (4)
  • 5 CT;30 PK (2)
  • 5 PK (1)
  • 5 PK;1 CT (9)
  • 5 PK;25 PK (1)
  • 50 CT (9)
  • 50 CT;200 PK (7)
  • 50 CT;500 PK (8)
  • 50 PK (12)
  • 50 PK;1 CT (8)
  • 500 BG (3)
  • 500 PK (17)
  • 500 PK;100 CT (1)
  • 500 PK;50 CT (7)
  • 500 STD PK;50 CT (3)
  • 5000 CA (1)
  • 5000 CT (1)
  • 6 CT (24)
  • 6 PK (6)
  • 6 PK;1 CT (6)
  • 60 PK;10 CT (1)
  • 6000 CA (1)
  • 7000 PK;50 CT (1)
  • 75 CT (2)
  • 75 PK (1)
  • 8 CT (1)
  • 80 PK (1)
  • Show More...

• Connection Type

  

  • Clamp-On (9)
  • Combination (7)
  • Compression (9)
  • E-Z Lock(R) (2)
  • FMC (11)
  • Liquidtight (6)
  • Rigid (6)
  • Screw (12)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (3)
  • Set Screw (14)
  • Single Gang Wall Plate (5)
  • Single Screw Strap-Type (2)
  • Snap-In (4)
  • Snap-On (2)
  • Squeeze (16)
  • Straight (8)
  • Threaded (42)
  • U Shaped (1)
  • Show More...

• Weight

  

  • 0.0001 lb/EA (1)
  • 0.0002 lb/EA (2)
  • 0.0005 lb/EA (4)
  • 0.0006 lb/EA (2)
  • 0.0007 lb/EA (4)
  • 0.0008 lb/EA (1)
  • 0.001 lb/EA (1)
  • 0.0019 lb (1)
  • 0.003 lb/EA (1)
  • 0.005 lb/EA (1)
  • 0.0068 lb/EA (1)
  • 0.0078 lb/EA (1)
  • 0.01 lb (2)
  • 0.012 lb/EA (1)
  • 0.015 lb/EA (1)
  • 0.0167 lb/EA (2)
  • 0.017 lb (1)
  • 0.0183 lb/EA (1)
  • 0.0187 lb (1)
  • 0.0189 lb/EA (1)
  • 0.019 lb/EA (1)
  • 0.02 lb/EA (9)
  • 0.0204 lb/EA (1)
  • 0.0216 lb/EA (1)
  • 0.0223 lb/EA (1)
  • 0.0234 lb (2)
  • 0.0282 lb/EA (1)
  • 0.0294 lb (1)
  • 0.03 lb (3)
  • 0.03 lb/EA (4)
  • 0.0362 lb (1)
  • 0.04 lb (1)
  • 0.04 lb/EA (3)
  • 0.0475 lb/EA (1)
  • 0.05 lb/EA (3)
  • 0.051 lb/EA (1)
  • 0.0513 lb/EA (1)
  • 0.052 lb/EA (1)
  • 0.0523 lb/EA (1)
  • 0.055 lb/EA (1)
  • 0.0566 lb (1)
  • 0.0579 lb/EA (1)
  • 0.06 lb/EA (5)
  • 0.062 lb/EA (2)
  • 0.066 lb/EA (1)
  • 0.068 lb/EA (2)
  • 0.0696 lb/EA (1)
  • 0.07 lb (1)
  • 0.07 lb/EA (2)
  • 0.075 lb/EA (2)
  • 0.078 lb/EA (1)
  • 0.0795 lb/EA (1)
  • 0.08 lb/EA (11)
  • 0.0839 lb/EA (2)
  • 0.085 lb (3)
  • 0.085 lb/EA (1)
  • 0.09 lb (1)
  • 0.0900 lb (1)
  • 0.094 lb/EA (1)
  • 0.0984 lb/EA (1)
  • 0.1 lb (1)
  • 0.1 lb/EA (3)
  • 0.1016 lb/EA (1)
  • 0.11 lb (1)
  • 0.11 lb/EA (1)
  • 0.112 lb/EA (1)
  • 0.117 lb/EA (1)
  • 0.12 lb (1)
  • 0.12 lb/EA (3)
  • 0.1200 lb (2)
  • 0.1289 lb/EA (1)
  • 0.13 lb (2)
  • 0.13 lb/EA (5)
  • 0.1328 lb/EA (1)
  • 0.133 lb/EA (1)
  • 0.137 lb/EA (2)
  • 0.138 lb/EA (2)
  • 0.14 lb (1)
  • 0.14 lb/EA (5)
  • 0.144 lb/EA (1)
  • 0.145 lb (1)
  • 0.15 lb (1)
  • 0.15 lb/EA (2)
  • 0.152 lb/EA (1)
  • 0.16 lb/EA (2)
  • 0.17 lb (3)
  • 0.17 lb/EA (3)
  • 0.175 lb/EA (1)
  • 0.185 lb/EA (1)
  • 0.1864 lb/EA (1)
  • 0.19 lb (2)
  • 0.19 lb/EA (5)
  • 0.193 lb/EA (2)
  • 0.1990 lb/EA (1)
  • 0.2 lb (4)
  • 0.2 lb/EA (6)
  • 0.2000 lb (2)
  • 0.208 lb/EA (1)
  • 0.21 lb (2)
  • 0.21 lb/EA (1)
  • 0.22 lb/EA (2)
  • 0.221 lb/EA (1)
  • 0.23 lb/EA (2)
  • 0.232 lb/EA (1)
  • 0.24 lb/EA (3)
  • 0.2400 lb/EA (1)
  • 0.25 lb (1)
  • 0.26 lb (3)
  • 0.26 lb/EA (3)
  • 0.267 lb/EA (1)
  • 0.2689 lb/EA (1)
  • 0.27 lb/EA (2)
  • 0.276 lb/EA (1)
  • 0.2779 lb/EA (1)
  • 0.28 lb (2)
  • 0.28 lb/EA (3)
  • 0.286 lb/EA (1)
  • 0.29 lb/EA (1)
  • 0.2920 lb/EA (1)
  • 0.3 lb (1)
  • 0.3 lb/EA (3)
  • 0.304 lb/EA (1)
  • 0.31 lb (3)
  • 0.31 lb/EA (2)
  • 0.32 lb/EA (1)
  • 0.3200 lb (2)
  • 0.34 lb (2)
  • 0.34 lb/EA (2)
  • 0.35 lb/EA (1)
  • 0.355 lb/EA (1)
  • 0.36 lb/EA (3)
  • 0.38 lb (1)
  • 0.38 lb/EA (2)
  • 0.39 lb (2)
  • 0.39 lb/EA (3)
  • 0.4 lb (9)
  • 0.4 lb/EA (2)
  • 0.404 lb/EA (1)
  • 0.405 lb/EA (1)
  • 0.408 lb/EA (1)
  • 0.41 lb/EA (2)
  • 0.42 lb (1)
  • 0.4217 lb/EA (1)
  • 0.428 lb/EA (1)
  • 0.44 lb (1)
  • 0.45 lb (2)
  • 0.46 lb (2)
  • 0.46 lb/EA (1)
  • 0.48 lb/EA (1)
  • 0.49 lb (2)
  • 0.49 lb/EA (2)
  • 0.5 lb/EA (2)
  • 0.5000 lb/EA (1)
  • 0.52 lb/EA (4)
  • 0.5240 lb/EA (1)
  • 0.53 lb/EA (2)
  • 0.533 lb/EA (2)
  • 0.54 lb (1)
  • 0.55 lb (2)
  • 0.55 lb/EA (1)
  • 0.56 lb (1)
  • 0.564 lb/EA (1)
  • 0.5717 lb/EA (2)
  • 0.58 lb (1)
  • 0.58 lb/EA (1)
  • 0.59 lb/EA (2)
  • 0.6 lb (2)
  • 0.6 lb/EA (2)
  • 0.62 lb (1)
  • 0.62 lb/EA (2)
  • 0.635 lb/EA (1)
  • 0.64 lb (1)
  • 0.66 lb/EA (2)
  • 0.664 lb/EA (1)
  • 0.7 lb/EA (1)
  • 0.72 lb (1)
  • 0.76 lb/EA (2)
  • 0.768 lb/EA (1)
  • 0.77 lb/EA (1)
  • 0.79 lb (1)
  • 0.79 lb/EA (1)
  • 0.8 lb/EA (2)
  • 0.81 lb/EA (1)
  • 0.82 lb/EA (1)
  • 0.87 lb/EA (2)
  • 1 lb (3)
  • 1 lb/EA (6)
  • 1.01 lb (1)
  • 1.01 lb/EA (1)
  • 1.03 lb (1)
  • 1.0499 lb (1)
  • 1.0499 lb/EA (2)
  • 1.1239 lb/EA (1)
  • 1.17 lb (1)
  • 1.2 lb (1)
  • 1.2 lb/EA (2)
  • 1.23 lb (1)
  • 1.2839 lb (1)
  • 1.3 lb (1)
  • 1.308 lb/EA (2)
  • 1.3099 lb/EA (1)
  • 1.34 lb (1)
  • 1.36 lb (1)
  • 1.36 lb/EA (1)
  • 1.4799 lb/EA (1)
  • 1.48 lb (2)
  • 1.49 lb (1)
  • 1.499 lb/EA (1)
  • 1.57 lb (1)
  • 1.57 lb/EA (1)
  • 1.67 lb/EA (1)
  • 1.68 lb (1)
  • 1.7 lb (1)
  • 1.76 lb (1)
  • 1.87 lb/EA (1)
  • 1.93 lb (1)
  • 1.9599 lb/EA (1)
  • 1.97 lb/EA (1)
  • 10.3 oz (1)
  • 11.0 lb (2)
  • 12 lb/EA (2)
  • 12.0 lb (1)
  • 149.12 lb (1)
  • 2 lb (4)
  • 2 lb/EA (2)
  • 2.02 lb (1)
  • 2.05 lb (1)
  • 2.11 lb (1)
  • 2.11 lb/EA (1)
  • 2.2 lb/EA (1)
  • 2.27 lb (1)
  • 2.4 lb (2)
  • 2.5 lb/EA (1)
  • 2.56 lb (1)
  • 2.76 lb/EA (1)
  • 2.7999 lb/EA (1)
  • 21 lb/EA (1)
  • 3 lb/EA (1)
  • 3.15 lb (1)
  • 3.48 lb (1)
  • 3.54 lb/EA (1)
  • 3.73 lb (1)
  • 3.8 lb (1)
  • 3.9 lb (2)
  • 4.5 lb/EA (1)
  • 45 lb/EA (1)
  • 5 lb/EA (1)
  • 6 lb/EA (2)
  • 6.1 oz (1)
  • 9.0 lb (1)
  • Show More...

• Thread Length

  

  • 0.552 in (1)
  • 1 in (1)
  • 1/2 in (8)
  • 11/16 in (1)
  • 1-1/16 in (1)
  • 1-1/4 in (1)
  • 1-1/8 in (2)
  • 3/4 in (1)
  • 5/8 in (7)
  • 7/16 in (3)
  • 7/8 in (1)
  • Show More...

• Height

  

  • .411 (3)
  • .598 (1)
  • .697 (2)
  • .778 (1)
  • .866 (1)
  • .969 (1)
  • 0.453 in (5)
  • 0.465 (1)
  • 0.562 (1)
  • 0.65 (1)
  • 0.6875 in (1)
  • 0.718 in (1)
  • 0.75 in (1)
  • 0.778 (1)
  • 1.04 (1)
  • 1.07 (1)
  • 1.13 (2)
  • 1.205 (1)
  • 1.375 in (1)
  • 1.472 (1)
  • 1.57 (1)
  • 1.94 in (1)
  • 1/2 in (4)
  • 10 (1)
  • 11/16 in (1)
  • 1-1/16 in (1)
  • 1-1/2 (1)
  • 1-1/8 (1)
  • 1-11/16 in (1)
  • 1-15/16 in (1)
  • 13/16 in (1)
  • 1-3/4 in (2)
  • 1-3/8 in (3)
  • 1-5/16 in (1)
  • 1-5/8 in (1)
  • 2 in (4)
  • 2.125 (1)
  • 2.13 in (1)
  • 2.187 in (1)
  • 2.25 in (1)
  • 2.81 in (1)
  • 2-1/16 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-7/16 in (1)
  • 2-7/32 in (1)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3.31 in (1)
  • 3.56 in (1)
  • 3/4 in (9)
  • 3/8 in (2)
  • 3-1/2 in (1)
  • 3-1/8 in (1)
  • 3-3/4 in (1)
  • 3-5/16 in (1)
  • 4.56 in (1)
  • 4-1/2 in (2)
  • 5/8 in (2)
  • 7.250 in (1)
  • 7/8 in (5)
  • 9 (1)
  • 9/16 in (1)
  • Show More...

• Made In Usa

  

  • no (1)
  • yes (487)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (4)
  • # 2 AWG (STR) (7)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (6)
  • # 6 AWG (STR) (8)
  • # 8 AWG (STR) (4)
  • #14 to 1/0 AWG (7)
  • #14 to 4 AWG (3)
  • #3/0,#4/0 (1)
  • #4 AWG (1)
  • .250 (1)
  • .375 (1)
  • 1/0 AWG (STR) (6)
  • 1/0 AWG-250 MCM (2)
  • 1-1/4 to 3 in (2)
  • 12/4, 10/2, 10/3 (1)
  • 14/2 to 10/3 (3)
  • 14/2 to 8/3 With Ground (1)
  • 14/2, 12/2 (1)
  • 14/3 To 8/3 (1)
  • 14/3, 12/3 (1)
  • 14-2 AWG (1)
  • 14-2/0 AWG (1)
  • 2/0 AWG (STR) (5)
  • 2-4/0 AWG (1)
  • 250 MCM (STR) (5)
  • 250-500 MCM (1)
  • 2-6(ACSR) - 1 STR-6 SOL(Aluminum) (1)
  • 3/0 AWG (STR) (6)
  • 3/0-4 AWG (1)
  • 300 MCM (STR) (2)
  • 350 MCM (STR) (5)
  • 4/0 AWG (STR) (5)
  • 4/0-14 AWG (2)
  • 400 MCM (STR) (2)
  • 500 MCM (STR) (6)
  • 600 MCM (STR) (2)
  • 6-1/0 AWG (1)
  • 750 MCM (STR) (3)
  • 8-2 AWG (1)
  • 8-2/0 AWG (1)
  • EMT: 1-1/4 in (1)
  • Rigid: 1 in;EMT: 1 in (1)
  • Rigid: 1/2 in;EMT: 1/2 in (1)
  • Rigid: 1-1/2 in (1)
  • Rigid: 1-1/4 in;EMT: 1-1/2 in (1)
  • Rigid: 2 in;EMT: 2 in (1)
  • Rigid: 2-1/2 in;EMT: 2-1/2 in (1)
  • Rigid: 3 in;EMT: 3 in (1)
  • Rigid: 3/4 in;EMT: 3/4 in (1)
  • Rigid: 3-1/2 in;EMT: 3-1/2 in (1)
  • Rigid: 4 in;EMT: 4 in (1)
  • Show More...

• Hub Size

  

  • 0.5 (2)
  • 0.75 (8)
  • 1 (8)
  • 1.25 (5)
  • 1.25 in (1)
  • 1.5 (7)
  • 2 (7)
  • 3/4 in (1)
  • 3/8 in (2)
  • Show More...

• Number Of Conductors

  

  • 1 (81)
  • 1 Cable (18)
  • 10 (2)
  • 12 (2)
  • 2 (96)
  • 3 (23)
  • 4 (15)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • up to 6 max (1)
  • Show More...

• Knockout Size

  

  • 0.370 in (2)
  • 1 in (1)
  • 1/2 in (2)
  • 1-1/2 in (1)
  • 1-1/4 in (2)
  • 19/32 in (1)
  • 2 in (1)
  • 3/4 in (2)
  • 3/8 in (2)
  • Show More...

• Overall Length

  

  • 0.5 in (1)
  • 0.625 in (1)
  • 0.787 in (1)
  • 0.854 in (1)
  • 0.866 in (1)
  • 1 in (2)
  • 1.06 in (1)
  • 1.07 in (1)
  • 1.12 in (2)
  • 1.125 in (1)
  • 1.13 in (1)
  • 1.153 in (2)
  • 1.16 in (1)
  • 1.161 in (1)
  • 1.201 in (1)
  • 1.250 in (1)
  • 1.252 in (1)
  • 1.350 in (1)
  • 1.47 in (4)
  • 1.496 in (1)
  • 1.5 in (2)
  • 1.50 in (1)
  • 1.54 in (1)
  • 1.55 in (1)
  • 1.574 in (1)
  • 1.584 in (1)
  • 1.594 in (1)
  • 1.6 in (1)
  • 1.62 in (2)
  • 1.752 in (2)
  • 1.772 in (1)
  • 1.84 in (2)
  • 1.85 in (1)
  • 1.875 in (1)
  • 1.913 in (2)
  • 1.95 in (1)
  • 1-1/2 in (Stud) (1)
  • 1-1/4 in (Stud) (1)
  • 1-1/8 in (Stud) (1)
  • 12 in (1)
  • 14 in;356 mm (1)
  • 2 in (1)
  • 2.071 in (1)
  • 2.106 in (1)
  • 2.12 in (1)
  • 2.209 in (1)
  • 2.25 in (2)
  • 2.252 in (1)
  • 2.27 in (1)
  • 2.28 in (4)
  • 2.281 in (1)
  • 2.283 in (1)
  • 2.362 in (1)
  • 2.47 in (1)
  • 2.551 in (1)
  • 2.56 in (1)
  • 2.63 in (2)
  • 2.66 in (1)
  • 2.677 in (2)
  • 2.75 in (1)
  • 2.795 in (1)
  • 2.81 in (1)
  • 2.88 in (1)
  • 2.9 in (4)
  • 2.93 in (1)
  • 22 (1)
  • 2-3/8 in (1)
  • 3 in (1)
  • 3.03 in (1)
  • 3.13 in (1)
  • 3.18 in (2)
  • 3.25 in (1)
  • 3.41 in (1)
  • 3.52 in (1)
  • 3.6 in (2)
  • 3.76 in (1)
  • 3.8 in (1)
  • 3.880 in (1)
  • 4 in (5)
  • 4.01 in (1)
  • 4.094 in (1)
  • 4.229 in (1)
  • 4.5 in (1)
  • 4.57 in (1)
  • 4.62 in (1)
  • 4.65 in (1)
  • 4.66 in (1)
  • 5 in (2)
  • 5 in (Connector);8 in (Sleeve) (1)
  • 5.05 in (1)
  • 5.24 in (1)
  • 5.25 in (1)
  • 5.5 in (7)
  • 5.52 in (1)
  • 5.75 in (1)
  • 5.79 in (1)
  • 5.83 in (1)
  • 5-1/16 in (1)
  • 6 in (Sleeve) (1)
  • 6.35 in (1)
  • 6.38 in (2)
  • 6.5 in (1)
  • 7.52 in (1)
  • 8 in (1)
  • 8.3 in (1)
  • 8.83 in (1)
  • 9.060 in (1)
  • 9.23 in (1)
  • Show More...

• Additional Information

  

  • 98012058795 (1)
  • Grounding Wire Application (1)
  • HEAVY DUTY; SCREW TERMINALS PERMIT FIELD WIRING OF 12 TO 22 AWG WIRE (1)
  • Show More...

• Overall Width

  

  • 0.161 in (2)
  • 0.197 in (2)
  • 0.236 in (1)
  • 0.339 in (2)
  • 0.63 in (1)
  • 0.65 in (3)
  • 0.669 in (1)
  • 0.67 in (1)
  • 0.714 in (1)
  • 0.717 in (2)
  • 0.720 in (2)
  • 0.75 in (2)
  • 0.784 in (1)
  • 0.795 in (1)
  • 0.828 in (1)
  • 0.906 in (4)
  • 0.97 in (1)
  • 1.04 in (4)
  • 1.25 in (1)
  • 1.260 in (1)
  • 1.71 in (4)
  • 2.375 in (1)
  • 2.9 in (7)
  • 3-1/16 in (1)
  • 3-7/8 in;99 mm (1)
  • 4.625 in (1)
  • Show More...

• Overall Height

  

  • 0.50 in (1)
  • 0.697 in (2)
  • 0.866 in (2)
  • 0.969 in (1)
  • 1.016 in (2)
  • 1.043 in (2)
  • 1.134 in (1)
  • 1.142 in (2)
  • 1.252 in (4)
  • 1.382 in (1)
  • 1.385 in (1)
  • 1.4 in (3)
  • 1.575 in (1)
  • 1.69 in (2)
  • 1.761 in (1)
  • 2.132 in (1)
  • 2.34 in (4)
  • 2.62 in (4)
  • 2.93 in (1)
  • 3.25 in (7)
  • 3.75 in (1)
  • 3.875 in (1)
  • 4 in (1)
  • 8.25 in (1)
  • 8-5/16 in (1)
  • Show More...

• Number Of Gangs

  

  • 1 (1)
  • 2 (2)
  • Show More...

• Terminal Type

  

  • Compression (8)
  • Push-In (3)
  • Screw (24)
  • Split (9)
  • Twist-On (7)
  • Winged (10)
  • Show More...

• Number Of Holes

  

  • 1 (53)
  • 1;2;3 (2)
  • 1;3 (1)
  • 2 (30)
  • 2;3 (3)
  • 3;4 (2)
  • 4 (1)
  • Show More...

• Maximum Voltage Rating

  

  • 1000 V (4)
  • 300 V (2)
  • 35 kV (5)
  • 600 V (89)
  • 600 V ac (22)
  • Show More...

• Mounting Type

  

  • Bracket Mount (1)
  • Conduit Mount (7)
  • Door Mount (1)
  • Flush Mount (8)
  • No (2)
  • Screw Mount (5)
  • Screw Mount;Nail Tab Mount (2)
  • Twist Lock Mount (1)
  • Show More...

• Enclosure Type

  

  • Indoor (2)
  • Indoor/Outdoor (8)
  • NEMA FB-1 (14)
  • Show More...

• Poles

  

  • 1 (217)
  • 2 (7)
  • 3 (2)
  • 600 V (1)
  • Show More...

• Category Description

  

  • 1PH MANUAL STARTERS (4)
  • ADHESIVES (3)
  • ANCHORS & ANCHOR KITS (1)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (15)
  • CABLE & PIPE TRANSITS (1)
  • Commercial dimmers, motion sensors, & photo cells (10)
  • Comp & Mech Lugs and Butt Splices (159)
  • CONDUIT HANGERS/STAND OFF STRAPS (20)
  • CONTROL TRANSFORMERS (1)
  • CORD CONNECTORS & CORD GRIPS (62)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (47)
  • Datacom Wiring Devices and Accessories (3)
  • DECORATIVE RESIDENTIAL (1)
  • DIECAST EMT FITTINGS (102)
  • DIECAST OFFSET & CHASE NIPPLES (18)
  • ELECTRONIC BALLAST (1)
  • EMT ELBOWS (2)
  • EMT STRAPS (15)
  • EXOTHERMIC GROUNDING PRODUCTS (3)
  • FLEX & MC FITTINGS (98)
  • FLEX & MC STRAPS (4)
  • FORM 5 CONDULETS, COVERS, & GASKETS (37)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (13)
  • Form 9 condulets, covers & gaskets (1)
  • Fuses & Fuse Accessories (13)
  • HAND TOOLS (12)
  • Incandescent (Except Residential) (1)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (127)
  • METALLIC FITTINGS (39)
  • Motors (1)
  • NON-METALLIC FITTINGS (14)
  • PLASTIC BOXES (2)
  • Poles & Accessories (2)
  • Portable Cords, Voice, Data, Video Wire & Cable (1)
  • PUSHBUTTONS & CHIMES (1)
  • PVC BOXES (1)
  • Residential cord connectors (1)
  • Residential dimmers, motion sensors, controls, & photo cells (13)
  • RIGID COUPLINGS (8)
  • RIGID ELBOWS (4)
  • RIGID STRAPS & CLAMPBACKS (30)
  • ROMEX CONNECTORS (11)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (79)
  • SECURITY & FIRE ALARM SYSTEMS (1)
  • SENSORS (1)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (77)
  • SIGNALING EQUIPMENT (4)
  • SLB'S & JAKE ELL'S (6)
  • SPLICE KITS (15)
  • SPLIT BOLTS (113)
  • STANDARD DUTY PUSHBUTTONS (10250H-) (1)
  • STEEL BOXES & COVERS (8)
  • STEEL EMT FITTINGS (125)
  • STRUT STRAPS (1)
  • T&B C TAP LUGS (14)
  • TAPE (46)
  • TERMINAL BLOCK ACESSORIES (1)
  • TERMINAL BLOCKS POWER DIST BLOCKS (33)
  • TERMINALS (100)
  • TIME CLOCKS (33)
  • TIMERS (6)
  • TOGGLE SWITCHES (6)
  • TRANSFORMER ACCESSORIES (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (17)
  • WIRE LUBE, MARKERS, & TIES (2)
  • WIRE NUTS (38)
  • Show More...

• Wire Type

  

  • 2 Conductor Cable (1)
  • 2 Conductor With Ground (1)
  • 3 Conductor With Ground (1)
  • Al/Cu (4)
  • B,C,D,K,M,I (12)
  • Class A & B (32)
  • Class B & C (84)
  • COPPER (13)
  • CU Wire Only (27)
  • Show More...

• Frequency Rating

  

  • 50/60 Hz (1)
  • 50-60 Hz (37)
  • 60 Hz (19)
  • Show More...

• Temperature Rating

  

  • 105 (2)
  • 105 C (16)
  • 105 Degree C (7)
  • 105?°C (50)
  • 150?° (9)
  • 150?°C (18)
  • -40 F to 250 F (2)
  • -40F to 185F (36)
  • 90 (4)
  • 90 C (83)
  • 90?°C (14)
  • B7613 (1)
  • no rating (2)
  • Recommended usage 25deg. F to 120 deg. F (2)
  • Up to 2 Hours (1)
  • Show More...

• Stud Size

  

  • #10 (1)
  • 1/2 (40)
  • 1/4 (13)
  • 3/8 (19)
  • 5/16 (4)
  • 5/8 (2)
  • Show More...

• Minimum Qty

  

  • 100 (84)
  • 1000 (7)
  • 15 (3)
  • 20000 (1)
  • 25 (4)
  • 250 (1)
  • 30 (1)
  • 30000 (1)
  • 35000 (1)
  • 40 (3)
  • 50 (41)
  • 500 (6)
  • Show More...

• Base

  

  • Polypropylene (1)
  • Screw (22)
  • Wall Plate (14)
  • Show More...

• Housing Material

  

  • Aluminum (76)
  • Aluminum Alloy-Tin Plated (4)
  • CAST ALUMINUM (1)
  • Copper (20)
  • Die Cast Zinc (1)
  • Die-Cast Zinc (1)
  • Lexan (7)
  • Lexan Housing (1)
  • Nylon (1)
  • Thermoplastic (6)
  • Tin Plated Copper (6)
  • Vinyl Insulation (1)
  • Show More...

• Connector Type

  

  • AL/CU (1)
  • CAT5/5E Connector (1)
  • CAT6 Connector (1)
  • Color-Coded (1)
  • Combination (17)
  • Compression (87)
  • Duplex (1)
  • E-Z Lock® (4)
  • FMC (31)
  • Jacketed MC/TECK (2)
  • Liquidtight (14)
  • LiquidTight, Insulated (3)
  • Made in USA Compression (6)
  • Nonmetallic (1)
  • Nonmetallic, Screw-on (1)
  • PUSH-EMT® (10)
  • Raintight Compression (10)
  • Screw-In (8)
  • Screw-In, Insulated (6)
  • SET SCREW (60)
  • Single Screw Strap-Type, Insulated (1)
  • Single Screw, Strap Type (2)
  • Snap (2)
  • Squeeze (22)
  • Squeeze, Insulated (9)
  • Steel Raintight/Concrete-Tight Insulated (10)
  • STRAIGHT (12)
  • Straight Nonmetallic (9)
  • Straight, Insulated (3)
  • Three-piece Conduit (7)
  • TRANSITION (3)
  • Two Screw Strap Type (1)
  • Two Screw, Strap Type (5)
  • Two-Screw, Strap Type (12)
  • U Shaped (2)
  • U Shaped, Insulated (1)
  • Show More...

• Cable Entry

  

  • Does not Apply (2)
  • Knockouts (2)
  • Lock-In tabs for NM cable (1)
  • Phenolic entrance to Aluminum clamp type for Rigid/IMC (10)
  • Push-In tabs for NM cable (2)
  • Raised Mast entry (6)
  • Single rectangular entry point (2)
  • Single round entry point (1)
  • Threaded entry port (2)
  • Through conduit into expansion throat back to conduit (8)
  • Through Rigid conduit into throat of fitting (6)
  • Through the fitting or conduit that the locknut is attached to (35)
  • Two piece steel clamp with tabs to insert through knockout (4)
  • Show More...

• Type

  

  • 24 Hour In Wall Time Switch (1)
  • 24 Hour Time Switch (9)
  • 24 Hour Time Switch - 1 Or 2 Channel (2)
  • 7 Day Astronomic Time Switch - 1 Or 2 Channel (2)
  • 7 Day Time Switch - 1 Or 2 Channel (2)
  • Adaptor Plate (1)
  • Aluminum Double Lug (5)
  • Aluminum Ground Clamp (3)
  • Aluminum Lay-In Lug (4)
  • Aluminum Single Lug (3)
  • Aluminum Split Bolts (4)
  • Aluminum Stacked Lug (1)
  • Armored Wire Adaptor (1)
  • Astronomic In Wall Timer (2)
  • Bi-Metallic Pin (3)
  • BOX CONNECTOR (1)
  • Box Supports (2)
  • Box Vaportite (1)
  • BUSHING (86)
  • Cable Stacker (1)
  • Cable Support (1)
  • Chime Kit (1)
  • Clamp Backs (3)
  • Clamp Straps (2)
  • Closed End Connectors (1)
  • COMBINATION (4)
  • Combination Pails (1)
  • Concrete Slab Elbow (1)
  • Conduit Clamps (10)
  • Conduit Hangers (17)
  • Conduit Hangers with Bolt and Nut (6)
  • Conduit Nipple (10)
  • Conduit Nipples (1)
  • CONNECTOR (281)
  • Connectors (11)
  • Copper Butt Splice Kit (1)
  • Copper C Taps (3)
  • Copper Single Lug (1)
  • Copper Split Bolts (11)
  • Copper Terminal Lug (1)
  • Cord Grips (12)
  • COUPLING (113)
  • Covers (3)
  • Crimp Sleeve Wire Connectors (3)
  • Crimp Tools (2)
  • C-Taps (5)
  • Delayed Response Utility Grade (2)
  • Die Cast Zinc Photocontrol (1)
  • Digital Auto Off In Wall Time Switch (1)
  • DIN RAIL (1)
  • Direct Burial Splice Kit With Heat Shrink (2)
  • Double Primary (6)
  • Double Row (1)
  • Double Screw (1)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Double Snap (2)
  • DUPLEX (1)
  • Duplex E-Z LOCK® Snap-In MC Connector (2)
  • Electric Door Switches (1)
  • EMT Nail Strap (3)
  • EMT Pull Elbows (2)
  • Entrance Caps (10)
  • Extra Heavy Duty Direct Burial Ground Clamp (1)
  • E-Z LOCK (3)
  • F Connectors (1)
  • Gel Tap Splice Kits With Connector (2)
  • GENERAL PURPOSE (12)
  • Green Grounding Clip (1)
  • Green Grounding Screw (1)
  • Ground Hub Swing Type (3)
  • Ground Rod Clamps Heavy Duty (1)
  • Ground Rod Clamps Range Taking (1)
  • Ground Rod Clamps Standard Duty (3)
  • Grounding Pigtails (2)
  • Heavy Duty Bronze Ground Clamps (8)
  • Heavy Duty Direct Burial Ground Clamp (3)
  • Heavy Duty Direct Burial Lay-In Lug (6)
  • Heavy Duty Ground Connector For Parrallel Copper Cables (3)
  • Heavy Duty Ground Connector For Three Parrallel Copper Cables (1)
  • Heavy Duty Ground Connector For Two Parrallel Copper Cables (1)
  • IN LINE (2)
  • In-Line Gel Splice Kit (1)
  • IN-Line Splicer/Reducer (8)
  • Instant Response Turn Lock Photocontrol (1)
  • INSULATED (2)
  • Insulated Duplex E-Z LOCK® Snap-In MC Connector (2)
  • Insulation Piercing Connectors (3)
  • Insulator Support Beam Clamp (1)
  • Insulator Support Beam Clamps (4)
  • Intersystem Bonding Bridge (3)
  • Intersystem Bonding Connector (2)
  • Isolated Ground Bars (1)
  • Knockout Plugs (6)
  • Lay-In Ground Lug Direct Burial (1)
  • LB (2)
  • Lexan Swivel Photocontrol (1)
  • Liquidtight Sealing Ring (8)
  • LL/LR (2)
  • LOCKNUT (1)
  • Locknuts (34)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (27)
  • Long Barrel - One Hole With Peep Hole (1)
  • Long Barrel - Two Hole (19)
  • Male / Female Adaptor (1)
  • Mast Kit (1)
  • MECHANICAL HORN (1)
  • Miniterm Kit (1)
  • Mogul Conduit Bodies (1)
  • Multi Cable (14)
  • NAIL PLATE (2)
  • Natural (1)
  • Natural Cable Tie Mount (1)
  • Natural-Mountable (2)
  • NEMA 3 Metal Indoor-Outdoor Enclosure (1)
  • NEMA 3R Noryl Indoor-Outdoor Enclosure (1)
  • Non-Insulated Female Flag Terminal (1)
  • Non-Insulated Ring Terminal (7)
  • Non-Metallic Cable Splices And Taps (3)
  • Nylon Fully Insulated Female Disconnect (3)
  • Nylon Fully Insulated Male Disconnect (2)
  • Nylon Insulated Butt Connectors (3)
  • Nylon Insulated Female Disconnect (1)
  • Nylon Insulated Locking Spade Terminal (1)
  • Nylon Insulated Ring Terminal (3)
  • Nylon Insulated Spade Terminal (2)
  • Offset Entry (3)
  • Offset Nipple (8)
  • Offset Pin (8)
  • One Hole EMT Strap (6)
  • One Hole Pipe Strap (15)
  • One Hole Service Entrance Strap (1)
  • One Hole Strap (1)
  • One Hole Straps (2)
  • Oxide Inhibitor (1)
  • Panelboard Lug (4)
  • PIR Ceiling Mount Occupancy Sensor (2)
  • Pliers (1)
  • Premium (11)
  • Protective (1)
  • PULL CHAIN (1)
  • Pull Elbows (4)
  • Punchdown Tools (3)
  • Push In Wire Connectors (3)
  • Push On Gel Stub Splice Kit (1)
  • Rain Tight Compression Connector (1)
  • Raintight (2)
  • Raintight Compression (4)
  • Rebar Clamp (2)
  • Red Fire Alarm (3)
  • Red/Yellow (2)
  • Reducing Washer (7)
  • Reducing Washers (25)
  • Replacement Motor (1)
  • Replacement Sleeves (3)
  • RJ45 Boots (1)
  • Roll-On Splice Kits (2)
  • Roof Flashings (6)
  • ROUND (1)
  • Round or Octagonal (1)
  • ROUND VIBRATING GONG (1)
  • Rubber Cover For Toggle Switches (1)
  • Rubber Splicing Tape (1)
  • S Hook (1)
  • Screw Port Plug (1)
  • Sealing Compound (2)
  • Select Purpose (10)
  • Service Entrance LB (6)
  • Service Post Connectors (8)
  • Servie Entrance Sleeves (2)
  • Set Screw Slip (7)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (16)
  • Short Barrel - Two Hole (1)
  • Shorting Cap (1)
  • Shrink Tube Butt Connector (1)
  • Silicon Bronze Bolt (1)
  • Silicon Bronze Flat Washer (1)
  • Silicon Bronze Hex Nut (1)
  • Silicone Bronze Split Lockwashers (1)
  • Silicone Rubber (1)
  • Single Barrel, Cut In Double-Snap (1)
  • Single Barrel, Double-Snap (1)
  • SINGLE GANG (1)
  • Single Primary (5)
  • Single Primary (Line), Single Secondary (Load) (2)
  • Single Screw Strap Type (1)
  • Single Sided Entry (22)
  • Snap-In "U" Shaped, Strapped (1)
  • Solid Pin (10)
  • Spiral Wrap (3)
  • Splicer/Reducer (7)
  • Splicer-Reducers (1)
  • SPLIT (12)
  • Spring Wound In Wall Time Switch (7)
  • Spring Wound In Wall Time Switch (1)
  • Spring Wound In Wall Time Switch-Commercial Grade (1)
  • SQUARE (1)
  • Stainless Steel (1)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Wire Connectors (8)
  • Steel Cord Grips (10)
  • Straight Nonmetallic (1)
  • Strain Relief (1)
  • Straps (2)
  • Submersible Pedestal Connectors (9)
  • Switch Box Support (1)
  • Tan/Red (2)
  • Testers (1)
  • Threaded Hubs (6)
  • Tin Plated Copper Split Bolt (9)
  • TOGGLE SWITCH (3)
  • Transformer (1)
  • Transformer Lug (1)
  • Transformer Lug Kit (2)
  • Transition (6)
  • Trippers (1)
  • Two Hole Pipe Strap (16)
  • Type C (5)
  • Type LB (1)
  • Type LB Set Screw (6)
  • Type LL (5)
  • Type LR (5)
  • UF Cable Splice Kit (1)
  • UF Connectors (2)
  • Universal Straps (1)
  • Utility Grade Electronic With Fail On Mode (1)
  • UV Black (2)
  • Vinyl Insulated Butt Connectors (3)
  • Vinyl Insulated Female Disconnect (3)
  • Vinyl Insulated Locking Spade Terminal (7)
  • Vinyl Insulated Male Disconnect (2)
  • Vinyl Insulated Pin Terminal (1)
  • Vinyl Insulated Ring Terminal (14)
  • Vinyl Insulated Spade Terminal (8)
  • Voltage Markers (1)
  • Wedge Clamps (1)
  • Wedge Grip Clamps (3)
  • Wide Range Tap Connectors (6)
  • Winged Wire Connectors (11)
  • Wire Holder (2)
  • Wire Marker Books (2)
  • Wire Strippers (3)
  • Wrap Around Gel Splice Kits (2)
  • Wrap Around UF Splice Kit (1)
  • Zero Cross Turn Lock (1)
  • Zinc Diecast Ground Clamps (1)
  • Show More...

• Mounting

  

  • # 10 Mounting Hole (1)
  • .114 Mounting Holes (1)
  • .142 Mounting Holes (1)
  • .225 Mounting Holes (1)
  • 1.1 cm Oval Mounting Hole (1)
  • 1/2 Mounting Hole (14)
  • 1/2 Mounting Holes (24)
  • 1/2 Mountng Holes (1)
  • 1/4 Mounting Hole (8)
  • 1/4 Mounting Holes (4)
  • 1/4 Mountinng Hole (1)
  • 2 Mounting Holes (18)
  • 3/8 Mountign Hole (1)
  • 3/8 Mounting Hole (17)
  • 3/8 Mounting Holes (1)
  • 5/16 Mounting Hole (4)
  • 5/8 Mounting Hole (2)
  • Box Mount (1)
  • Bracket Mount (1)
  • Ceiling mount (2)
  • Clamp (3)
  • Conduit Mount (9)
  • Data Plate mounting bracket (Old Work) (1)
  • Flush Mount (3)
  • Indoor-Outdoor Box (1)
  • Mounts flush against structure. (6)
  • Mounts in either horizontal or vertical direction. (1)
  • No (2)
  • plastic and metal back boxes (1)
  • Screw Mount (32)
  • Screw or Nail fastening (2)
  • Screw or nail Tab (3)
  • Self Adhesive (1)
  • Self Stick (1)
  • Single Gang Wall Plate (12)
  • Slotted cover holes for nails or screws (2)
  • Slotted Holes in Base, 35mm DIN Rail w/Locking Feature (2)
  • Snap Mount (3)
  • TURN LOCK (1)
  • TWIST LOCK (4)
  • Twist-Lock (1)
  • UL (Canada and US) (1)
  • Show More...

• Tensile Strength

  

  • 120 (1)
  • 15 (10)
  • 17 (10)
  • 19.8 (10)
  • 20 (3)
  • 250 (1)
  • 333.6 (3)
  • 50 (4)
  • 580 (1)
  • 7 (1)
  • Show More...

• Operating Temperature

  

  • 105 C (1)
  • 270 (1)
  • -31 to 116 F (1)
  • 32 - + 104 F (1)
  • 32 to + 122 F (1)
  • 32 to +104 (1)
  • 32 to +104 F (1)
  • 32-122 F (12)
  • -40 to + 140 F (2)
  • -40 C To 90 C (12)
  • -40 to + 140 (1)
  • -40 to + 140 F (9)
  • -40 to + 149 F (3)
  • -40 to + 158 F (2)
  • -40 to 165 F (8)
  • Show More...

• Thickness

  

  • .007 (30)
  • .0085 (1)
  • 0.007 in (2)
  • 0.052 (1)
  • 0.052000000000000 (2)
  • 0.053 (1)
  • 0.076000000000000 (1)
  • 0.09 (1)
  • 1/16 (2)
  • 10 (3)
  • 125 (1)
  • 15 (1)
  • 18 mm (1)
  • 20 (1)
  • 30 (3)
  • 6 mil (1)
  • Show More...

• Contact Rating

  

  • 105-305 (1)
  • 120 VAC (8)
  • 120-208-240-277 VAC (1)
  • 120-230-277 VAC (1)
  • 120-240 VAC (1)
  • 120-277 V (2)
  • 120-277 VAC (6)
  • 125 (1)
  • 125-250-277 VAC (13)
  • 15 Amp (125 VAC) - 10 Amp (250 VAC) (1)
  • 20 Amp (125 VAC) - 10 Amp (250 VAC) (3)
  • 208-277 VAC (3)
  • 3/4 Amp (125 VAC) - 1/4 Amp (250 VAC) (1)
  • 480-120 Trans (1)
  • 6 AMP (125 VAC) - 3 AMP (250 VAC) (1)
  • Show More...

• Size

  

  • .375 Flush Mount (3)
  • .500 Conduit Mount (5)
  • 0 (3)
  • 0.240 in (Cable Dia.);0.040 in (Insulation Dia.) (1)
  • 0.275 in (Cable Dia.);0.040 in (Insulation Dia.) (1)
  • 1 (65)
  • 1 - 1/2 (2)
  • 1 - 3/4 (2)
  • 1 1/2 (24)
  • 1 1/4 (25)
  • 1/2 (71)
  • 1/2 - 1 (1)
  • 1/2 in (8)
  • 1-1/2 (26)
  • 1-1/2 - 1 (2)
  • 1-1/2 - 1/2 (2)
  • 1-1/2 - 1-1/4 (2)
  • 1-1/2 - 3/4 (2)
  • 1-1/2 DEEP (1)
  • 1-1/4 (24)
  • 1-1/4 - 1 (2)
  • 1-1/4 - 1/2 (2)
  • 1-1/4 - 3/4 (2)
  • 14/2 AWG;12/2 AWG (1)
  • 14/3 AWG;12/3 AWG (1)
  • 2 (57)
  • 2 - 1 (2)
  • 2 - 1 1/2 (1)
  • 2 - 1 1/4 (1)
  • 2 - 1/2 (2)
  • 2 - 1-1/2 (1)
  • 2 - 1-1/4 (1)
  • 2 - 3/4 (1)
  • 2 1/2 (17)
  • 2 1/2 - 1 (1)
  • 2 1/2 - 1 1/2 (1)
  • 2 1/2 - 1 1/4 (1)
  • 2 1/2 - 1/2 (1)
  • 2 1/2 - 2 (1)
  • 2 1/2 - 3/4 (1)
  • 2 -3/4 (1)
  • 2-1/2 (19)
  • 2-1/8 DEEP (1)
  • 3 (39)
  • 3 - 2 (1)
  • 3 - 2 1/2 (1)
  • 3 -1 1/2 (1)
  • 3 1/2 (11)
  • 3 1/2 - 2 (1)
  • 3 1/2 - 2 1/2 (1)
  • 3 1/2 - 3 (1)
  • 3 x 5 in (9)
  • 3/4 (85)
  • 3/4 - 1/2 (2)
  • 3/4 in (5)
  • 3/8 (32)
  • 3/8 in (3)
  • 3/8 lag screw approx.1" by 15/16 (1)
  • 3/8" (2)
  • 3-1/2 (16)
  • 4 (36)
  • 4 - 2 (1)
  • 4 - 2 1/2 (1)
  • 4 - 3 (1)
  • 4 - 3 1/2 (1)
  • 4.687 x 2.937 x 7.937 in (1)
  • 4-1/16 INCH W X 2-7/8 INCH D X 4-1/16 INCH H (1)
  • 4-1/2 (1)
  • 4-11/16 x 2-15/16 x 7-15/16 in (3)
  • 5 (6)
  • 5.062 x 3.062 x 8.312 in (4)
  • 5/8 & 1/2 Ground Rod or #3 & #4 Reinforcing Bars (1)
  • 5-1/16 x 3-1/16 x 8-5/16 in (4)
  • 6 (2)
  • 7 (1)
  • 9 (1)
  • Four Compartment Compact Pail (1)
  • H=.950 - W=.812 (1)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=1.09 - W=.563 -ID=.209 (1)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.205 - W=.730 (1)
  • H=1.25 - W=.906 - ID=.354 (2)
  • H=1.472 - W=.751 (1)
  • H=2.187 - W=3.187 (5)
  • H=5.00 - W=3.00 (7)
  • H=6.00 - W=3.25 (2)
  • L=.610 - W=.364 - ID=.263 (1)
  • L=.625 - W=.437 - H=.812 (1)
  • L=.687 - W=1.00 - H=.625 (1)
  • L=.880 - W=5.05 - H=2.10 (1)
  • L=.900 - OD=.270 - ID=.170 (1)
  • L=1.00 - OD=.340 - ID=.250 (1)
  • L=1.062 - W=.492 (1)
  • L=1.09 - OD=.598 - ID=.236 - Pin Dia=.240 (1)
  • L=1.10 - W=.673 - OD=.469 - ID.358 (1)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.125 - H=1.250 - W=.742 (1)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (2)
  • L=1.25 - OD=.420 - ID=.310 (1)
  • L=1.25 - W=8.83 - H=3.38 (1)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.50 - W=.490 - OD=.340 - ID=.250 (1)
  • L=1.50 - W=.560 - OD=.340 - ID=.250 (1)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.60 - OD=.520 - ID=.390 (1)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.75 - OD=.560 - ID=.440 (1)
  • L=1.75 - OD=.620 - ID=.490 (1)
  • L=1.80 - OD=.470 - ID=.360 (1)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (2)
  • L=1.83 - W=.670 - OD=.470 - ID=.360 (1)
  • L=1.83 - W=.739 - OD=.519 - ID=.389 (1)
  • L=1.840 - W=1.870 - H=1.870 (3)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.85 - OD=.598 - ID=.299 - Pin Dia=.240 (1)
  • L=1.90 - OD=.690 - ID=.550 (1)
  • L=1.920 - W=.750 (1)
  • L=1.920 - W=.880 (1)
  • L=1.93 - W=2.65 - H=2.10 (1)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=14.570 - W=2.410 - H=2.770 (1)
  • L=2.00 - OD=.598 - ID=.370 - Pin Dia=.290 (1)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.10 - OD=.810 - ID=.660 (1)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.190 - H=1.030 - W=.750 (1)
  • L=2.20 - OD=.469 - ID=.359 (1)
  • L=2.20 - OD=.519 - ID=.389 (1)
  • L=2.20 - OD=.850 - ID=.429 - Pin Dia=.330 (1)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.24 - W=.810 - OD=.560 - ID=.440 (1)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.250 - W=1.600 - H=1.750 (1)
  • L=2.35 - W=.550 - OD=.380 - ID=.270 (1)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.36 - W=.490 - OD=.340 - ID=.250 (1)
  • L=2.36 - W=.900 - OD=.620 - ID=.490 (1)
  • L=2.36 - W=1.00 - OD=.690 - ID=.550 (1)
  • L=2.390 - W=1.188 - H=1.375 (1)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.48 - W=1.09 - OD=.750 - ID=.590 (1)
  • L=2.50 - OD=1.06 - ID=.830 (1)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.540 - W=1.130 (1)
  • L=2.59 - OD=.850 - ID=.535 - Pin Dia=.420 (1)
  • L=2.61 - W=1.28 - OD=.870 - ID=.700 (1)
  • L=2.62 - OD=.689 - ID=.440 (1)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.79 - W=2.65 - H=2.10 (1)
  • L=2.79 - W=4.18 - H=2.10 (1)
  • L=2.814 - W=1.338 (2)
  • L=2.90 - H=2.34 - W=1.04 (5)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.00 - W=1.02 - OD=.759 - ID=.480 (1)
  • L=3.03 - W=1.09 - OD=.752 - ID=.594 (1)
  • L=3.09 - OD=1.09 - ID=.657 - Pin Dia=.530 (1)
  • L=3.12 - OD=.838 - ID=.550 (1)
  • L=3.240 - W=1.500 (1)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=3.28 - W=1.54 - OD=1.06 - ID=.830 (1)
  • L=3.39 - OD=1.31 - ID=.763 - Pin Dia=.620 (1)
  • L=3.46 - W=1.27 - OD=.874 - ID=.701 (1)
  • L=3.480 - W=3.500 - H=3.500 (1)
  • L=3.480 - W=4.500 - H=3.500 (1)
  • L=3.50 - W=1.25 - OD=.921 - ID=.590 (1)
  • L=3.520 - W=2.410 - H=2.610 (1)
  • L=3.560 - W=1.020 - H=2.570 (1)
  • L=3.610 - W=4.190 - H=3.060 (1)
  • L=3.65 - W=2.65 - H=2.10 (1)
  • L=3.800 - W=2.030 - H=2.180 (1)
  • L=3.800 - W=2.280 - H=2.180 (1)
  • L=3.90 - W=3.00 - H=4.50 (1)
  • L=30 FT - W=1.00 IN (1)
  • L=39.3 - H=10mm (1)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.010 - W=2.830 - H=2.910 (1)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=4.2 - W=5.1 - H=7.2 (1)
  • L=4.24 - W=1.51 - OD=1.11 - ID=.720 (1)
  • L=4.25 - OD=1.06 - ID=.830 (1)
  • L=4.29 - W=.750 - OD=.470 - ID=.360 (1)
  • L=4.420 - W=2.280 - H=2.370 (1)
  • L=4.470 - W=1.320 - H=2.200 (1)
  • L=4.570 - W=2.410 - H=2.610 (1)
  • L=4.620 - W=1.620 - H=3.000 (1)
  • L=4.626 - W=.795 - H=.670 (1)
  • L=4.660 - W=2.280 - H=2.180 (1)
  • L=4.74 - W=.84 - OD=.63 - ID=.39 (1)
  • L=4.74 - W=1.78 - OD=1.31 - ID=.838 (1)
  • L=4.79 - W=.937 - OD=.690 - ID=.440 (1)
  • L=4.800 - W=4.190 - H=3.060 (1)
  • L=4.812 - H=4.812 - W=3.312 (1)
  • L=4.96 - OD=1.50 - ID=.921 - Pin Dia=.688 (1)
  • L=4.96 - W=1.09 - OD=.750 - ID=.590 (1)
  • L=5 1/2 (1)
  • L=5.00 - W=1.02 - OD=.759 - ID=.479 (1)
  • L=5.062 - H-8.312 - W=3.062 (2)
  • L=5.120 - W=2.410 - H=2.770 (1)
  • L=5.15 - W=1.90 - OD=1.31 - ID=1.03 (1)
  • L=5.24 - W=1.14 - OD=.840 - ID=.550 (1)
  • L=5.240 - W=2.830 - H=2.910 (1)
  • L=5.30 - W=1.25 - OD=.920 - ID=.590 (1)
  • L=5.31 - W=1.19 - OD=.815 - ID=.657 (1)
  • L=5.39 - W=1.28 - OD=.870 - ID=.700 (1)
  • L=5.47 - W=1.39 - OD=.950 - ID=.760 (1)
  • L=5.50 - H=3.25 - W=2.90 (5)
  • L=5.50 - W=1.37 - OD=1.01 - ID=.650 (1)
  • L=5.620 - W=2.410 - H=2.610 (1)
  • L=5.75 - W=1.54 - OD=1.06 - ID=.840 (1)
  • L=5.79 - W=1.72 - OD=1.19 - ID=.930 (1)
  • L=5.800 - W=2.750 - H=3.750 (1)
  • L=5.87 - W=1.51 - OD=1.12 - ID=.720 (1)
  • L=6.30 - W=1.90 - OD=1.31 - ID=1.04 (1)
  • L=6.380 - W=2.830 - H=2.910 (1)
  • L=6.380 - W=3.410 - H=3.420 (1)
  • L=6.42 - W=1.60 - OD=1.19 - ID=.759 (1)
  • L=6.50 - W=1.78 - OD=1.32 - ID=.840 (1)
  • L=6.670 - W=2.410 - H=2.610 (1)
  • L=6.990 - W=.880 - H=1.130 (1)
  • L=7.180 - W=4.190 - H=3.060 (1)
  • L=7.520 - W=2.830 - H=2.910 (1)
  • L=7.75 - W=1.93 - H=.687 (1)
  • L=8.770 - W=2.410 - H=2.610 (1)
  • L=8.940 - W=2.810 - H=3.030 (1)
  • L=8.970 - W=2.280 - H=2.180 (1)
  • L=9.230 - W=3.410 - H=3.420 (1)
  • L=9.820 - W=2.830 - H=2.910 (1)
  • Large Cover (1)
  • Medium Cover (1)
  • Small Cover (1)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Thickness - 7mil - Length-60' - Width 3/4" (20)
  • Thickness - 7mil - Length-66' - Width 3/4" (10)
  • Thickness=.030 - Width=.75 - Length=22 feet (3)
  • Show More...

• Wire Size

  

  • (1) 1000-250 MCM(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 2/0-14 AWG(LINE) - (1) 2/0-14 AWG(LOAD) (1)
  • (1) 2/0-14 AWG(Line) - (4) 4-14 AWG(Load) (2)
  • (1) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 2-14 AWG(Line) - (1) 2-14 AWG(Load) (1)
  • (1) 250 MCM-6 AWGG(Line) - (1) 250 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (1) 350 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (1) 500 MCM-4 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (4) 4/0-6 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (2) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 2-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (2)
  • (2) 350 MCM-6 AWG(Line) - (2) 350 MCM-6 AWG(Load) (1)
  • (2) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(Line) - (2) 500 MCM-4 AWG(Load) (2)
  • (2) 500 MCM-4 AWG(LINE) - (4) 4/0-6 AWG(LOAD) (1)
  • (2) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 1 SOL - 2/0 STR (1)
  • 1 SOL - 4/0 STR (1)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (9)
  • 1/0-8 AWG (1)
  • 10 SOL - 2 STR (1)
  • 10 SOL - 6 SOL (1)
  • 10 STR - 6 STR (1)
  • 12-10 AWG (1)
  • 12-10 AWG (23)
  • 12-14 AWG (3)
  • 14 STR - 8 STR (1)
  • 14-8 AWG (1)
  • 16 STR - 8 STR (1)
  • 16-10 AWG (3)
  • 16-14 AWG (16)
  • 18-10 AWG (1)
  • 2 SOL - 2 STR (1)
  • 2 SOL - 2/0 STR (2)
  • 2 SOL - 3/0 STR (1)
  • 2/0 STR - 350 MCM (1)
  • 2/0-14 AWG (5)
  • 22-10 AWG (1)
  • 22-10 AWG (30 Amp) - 18-14 AWG (20 Amp) (1)
  • 22-12 AWG (20 Amp) - 20-18 AWG (10 Amp) (1)
  • 22-14 AWG (2)
  • 22-18 AWG (14)
  • 22-18, 16-14, 12-10 AWG (1)
  • 250 - 500 MCM (1)
  • 250 MCM-6 AWG (14)
  • 3/0 SOL - 4/0 STR (1)
  • 3/0 STR - 350 MCM (1)
  • 3/0 STR - 500 MCM (1)
  • 3/0-6 AWG (13)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 4 SOL - 1/0 STR (2)
  • 4 STR - 2 STR (1)
  • 4 STR - 3/0 STR (1)
  • 4 to 14 AWG (1)
  • 4/0 STR - 350 MCM (1)
  • 4-14 AWG (8)
  • 500 (1)
  • 500 MCM-4 AWG (11)
  • 6 AWG (3)
  • 6 SOL - 1/0 STR (2)
  • 6 SOL - 2 SOL (1)
  • 6 SOL - 2 STR (1)
  • 6 STR - 2/0 SOL (1)
  • 6 STR - 4/0 SOL (1)
  • 600 MCM-6 AWG (5)
  • 750-250 MCM (7)
  • 78181040872 (1)
  • 8 AWG (5)
  • 8 SOL - 1/0 STR (1)
  • 8 SOL - 2 STR (1)
  • 8 SOL - 4 SOL (1)
  • Main 2 ACSR 1-2 STR - Tap 2 ACSR 1-2 STR (1)
  • Main 4/0 ACSR 4/0 STR - Tap 4/0 ACSR 4/0 STR (1)
  • Show More...

• Conductor Size

  

  • #10 to #1/0 AWG (1)
  • #10 to #2 AWG (3)
  • #12 AWG (1)
  • #2 AWG (9)
  • #2/0 AWG to 250 MCM (1)
  • #4 to #2/0 AWG (1)
  • #4,6 or 8 AWG (1)
  • #6 AWG to 250 MCM (1)
  • #8 to #4/0 AWG (2)
  • (Run) 2 SOL-2 STR (1)
  • (Run) 3/0-4/0 STR (1)
  • (Run) 6 SOL-4 STR (1)
  • 1 3/4 Long or Less (1)
  • 1 AWG - 14 AWG (1)
  • 1 AWG - 6 AWG (1)
  • 1/0 TO 3/0 AWG (1)
  • 1/0-8 AWG (Main) (1)
  • 2 AWG - 6 AWG (1)
  • 2 Long or Less (1)
  • 2 TO 1 AWG (1)
  • 2/0 AWG (1)
  • 2-14 AWG (1)
  • 3/0 AWG - 6 AWG (1)
  • 4 AWG (2)
  • 4/0 AWG (1)
  • 4/0 AWG - 1/0 AWG (1)
  • 4/0 AWG - 3/0 AWG (1)
  • 4/0-3 AWG (Main) (1)
  • 4-14 AWG (1)
  • 500 MCM-2/0 AWG (Main) (1)
  • 6 AWG (1)
  • MCC-050: Copper Conductor Ranges: Solid & stranded #8 to #2 Bare AWG. Aluminum Conductor Range: Stranded #6 to #2 AWG. IGB-050: Copper Conductor Ranges and Torques: #14 - #10 Sol/Str Torque 10 in-lbs, #8 Solid Torque 40 in-lbs, #6 - #4 Solid Torque 45 in-lbs (1)
  • MCC-075: Copper Conductor Ranges: Solid #4 to #2 Bare AWG, Stranded #4 AWG - 3/0. Aluminum Conductor Randge: Stranded #2 AWG to 3/0 AWG. IGB-075: Copper Conductor Ranges and Torques: #14 - #10 Sol/Str Torque 10 in-lbs, #8 - #6 Sol/Str Torque 45 in-lbs, #4 Str Torque 45 in-lbs, #4 Solid Torque 60 in-lbs (1)
  • Terminal:#14 to #10 AWG;#8 to #4;AWG;Under Ground Rod:#8 to #2 AWG (1)
  • Show More...