---

Narrow By:

• Product Type:Straight Blade Duplex Receptacle
• Product Type:Recessed Straight Blade Receptacle
• Product Type:straight blade Receptacle
• Product Type:Duplex Receptacle

• Product Type

  

  • 1 In Alum L-T CRD&CBL Conn (2)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 In STR Strain RLF Conn (3)
  • 1-1/2 In Alum L-T CRD&CBL Conn (2)
  • 1-1/2 In STR Strain RLF Conn (2)
  • 2 In STR Strain RLF Conn (2)
  • 24.00IN Straight Section (2)
  • 36.00IN Straight Section (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (3)
  • 3M™ Performance Plus™ Wire Connectors (8)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Idc Connector 567 (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 48.00IN Straight Section (2)
  • 90° Connector (13)
  • 90°Connector (13)
  • Aluminum Male Union (2)
  • Anti-Oxidant Compound (4)
  • Back BX PWRMT 30a (2)
  • Back BX PWRMT 60a (2)
  • Blade Receptacle (2)
  • Butt Splice (2)
  • Cable Connector (2)
  • Cable Gland (3)
  • Cable Grip Connector and Mesh (2)
  • Coaxial Jack (3)
  • Combination Hallway Light and Receptacle (2)
  • Commercial Fittings (8)
  • Commercial Hub (10)
  • Compression (4)
  • Compression Connector (26)
  • Compression Lug (7)
  • Conductor Lug (2)
  • Conduit Body (10)
  • Conduit Elbow (2)
  • Connector (33)
  • Copper Compression Lug (4)
  • Copper Connector (3)
  • Cord Connector (21)
  • Cord Gland (28)
  • Cord Grip Connector (12)
  • Cord Grip Connector and Mesh (2)
  • Cordcon, STR ML, .75-.88", 3/4", Nyl, Gy (2)
  • Coupling (19)
  • C-Type Copper Compression Tap (5)
  • Decorator Duplex Receptacle (3)
  • Decorator Receptacle (5)
  • Deluxe Cord Grip (2)
  • Disc No Sub (3)
  • Dust Tight Grip (3)
  • Emt Compression Connector (56)
  • EMT Concrete Tight DC Connector (9)
  • Emt Conduit Connector (6)
  • Emt Conduit Elbow (9)
  • Emt Conduit Straight Set Screw Connector (6)
  • Emt Set Screw Connector (27)
  • EMT SS Diecast Connector (9)
  • Female Connector (3)
  • Female Twist On Connector (2)
  • Flexible Connector (6)
  • General Purpose Relay (6)
  • Ground Hub (8)
  • Ground Rod Clamp (2)
  • H-Type Compression Connector (9)
  • Hub (9)
  • Hub Connector (10)
  • Incandescent Airtight Housing (8)
  • Insulated Connector (12)
  • Insulating Bushing (7)
  • Insulation Displacement Connector (4)
  • Lay-In Wireway (9)
  • Liquid Tight 90° Connector (2)
  • Liquid Tight 90°Connector (7)
  • Liquid Tight Conduit (3)
  • Liquid Tight Connector (4)
  • Liquid Tight Straight Connector (49)
  • Loadcenter Cover (3)
  • Locking Device Connector (3)
  • Locking Device Plug (2)
  • Locking Device Turnlock Connector (8)
  • Locking Plug (2)
  • Mechanical (5)
  • Mechanical Connector Lug (15)
  • Modular Plug (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Nonmetallic Liquid-Tight Conduit (8)
  • Nonmetallic Liquid-Tight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Conduit Connector (6)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Straight Connector (6)
  • Overload Relay (3)
  • Panel (2)
  • Plastic Bushing (11)
  • PLG PWRMT 150A 3W4P .875-1.906 Rev Conts (2)
  • Plug (4)
  • Plug-In Relay (9)
  • Power Outlet Angle Plug (2)
  • Power Receptacle (2)
  • Powermate Receptacle (2)
  • Protective Cover (2)
  • Rec Dup TR 20A125V2P3W Controldual WH (2)
  • Recep Dup 15A/125V Side Wire Gray (2)
  • Receptacle (6)
  • Recp Deco Dup 20A 125V 2P3W B/Swire Iv (2)
  • Recp Deco Duplex 15A 125V 2P3W Gy (2)
  • Recp Single 15A 125V 2P3W STR Swire WH (2)
  • Recp Single 20A 125/250V 3P3W STR Iv (2)
  • Recp Single 20A 250V 2P3W Swire BR (2)
  • Recp Single TR 15A125V 2P3W STR Swire Iv (2)
  • Recp Single TR 15A125V 2P3W STR Swire La (2)
  • Recp TR Deco Duplex 20A 125V 2P3W W (2)
  • Relais De Surcharge Thermique (2)
  • Rigid Conduit Nipple (13)
  • Rigid Conduit Reducing Bushing (3)
  • Ring Tongue Compression Terminal (2)
  • Self Test Duplex Receptacle (21)
  • Self-Test Duplex Receptacle (37)
  • Self-Test Gfci Receptacle Receptacle (2)
  • Service Post Connector (13)
  • Set Screw EMT Connector (8)
  • Sierraplex Receptacle (3)
  • single Receptacle (48)
  • Squeeze Connector (17)
  • STR BLD Conn 3W 15A 125V HG (2)
  • Straight Blade Connector (12)
  • Straight Blade Device Connector (2)
  • Straight Blade Plug (15)
  • Straight Wall (2)
  • Strain Relief Connector (11)
  • Strain Relief Cord and Cable Connector (8)
  • Strain Relief Cord Connector (2)
  • Strain Relief Grip (5)
  • Strap Connector (14)
  • Submersible Connector (2)
  • Super-Safeway Plug (2)
  • Switch (4)
  • Tele-Power Pole (2)
  • Terminal (24)
  • Threaded Hub (5)
  • Threadless Coupling (6)
  • Toggle Combination Switch (2)
  • Toggle Switch (32)
  • Turnlock Single Receptacle (10)
  • Union (12)
  • Usb 3.1A Duplex Recp 15A 125V Iv (2)
  • Wall Plate, GC Waldom Electronics, Tel, 1 Gang, Cutout: SGL Jack (2)
  • Watertight Hub (4)
  • Watertight Plug (3)
  • Watertite Plug (2)
  • Wide Range Tap Connector (Al/Cu) ***** See Connectors Catalo (3)
  • Wire Connector (2)
  • Wiring Trough (2)
  • Show More...

• Brand

  

  • 3M (12)
  • ABB (12)
  • Amfico (15)
  • Appleton (68)
  • Appleton/Oz Gedney (2)
  • ARLINGTON (4)
  • Arlington Industries (16)
  • Arrow Hart (86)
  • Blackburn Grounding (13)
  • Blackburn Mechanical (30)
  • Brad (4)
  • Bridgeport (141)
  • Bridgeport Fittings (55)
  • BURNDY (39)
  • Cablofil (3)
  • CALBRITE (5)
  • Carlon(R) (4)
  • COOPER WIRING DEVICES (180)
  • Easy-Twist (3)
  • Eaton (238)
  • Eaton Corp (3)
  • EATON CROUSE-HINDS SERIES (83)
  • EATON CUTLER-HAMMER (11)
  • Eaton Wiring Devices (123)
  • Epco (2)
  • GC/Waldom Electronics (3)
  • HALO (10)
  • Highland (3)
  • HUBBELL WIRING DEVICE/KELLEMS (2)
  • Hubbell Wiring Devices (40)
  • Hubbell--Killark (4)
  • Ideal (20)
  • IDEC CORPORATION (11)
  • JUNO (2)
  • Keystone (3)
  • KILLARK (22)
  • Klein Tools (24)
  • Legrand On-Q (9)
  • LEGRAND-ON-Q (10)
  • LEGRAND-PASS & SEYMOUR (35)
  • LH DOTTIE (2)
  • Lutron (3)
  • Meltric (3)
  • MIDWEST (2)
  • Milwaukee® (3)
  • Minnesota Mining (3M) (2)
  • Nsi Industries (21)
  • Nvent Hoffman (22)
  • ON-Q (3)
  • O-Z/GEDNEY (12)
  • PANDUIT (6)
  • Pass & Seymour (44)
  • Pass & Seymour/Legrand (5)
  • Pass and Seymour (166)
  • PLASTIBOND (11)
  • Platinum Tools (4)
  • PLATINUM TOOLS INC (2)
  • Polaris (84)
  • Quazite (2)
  • RACO (8)
  • Scotchlok (17)
  • Southwire (4)
  • Southwire Rough Electrical Com (22)
  • Steel City (21)
  • STEREN ELECTRONICS INTL (3)
  • SUPERFLEX LTD. (23)
  • T&B Ind Fitting (60)
  • Thomas & Betts (4)
  • TOPAZ ELECTRIC CORP (14)
  • TURCK (4)
  • Viton(R) (4)
  • WIREMOLD (11)
  • WIRING DEVICE-KELLEMS (108)
  • Woodhead (6)
  • Show More...

• Number Of Poles

  

  • 1 (31)
  • 2 (315)
  • 2 A (3)
  • 3 (44)
  • 4 (11)
  • Show More...

• Current Rating

  

  • 10 A (16)
  • 100 A (3)
  • 15 (2)
  • 15 A (166)
  • 20 (23)
  • 20 A (169)
  • 225 A (2)
  • 30 (4)
  • 30 A (37)
  • 30/50 A (3)
  • 50 A (14)
  • 6 A (2)
  • 60 (2)
  • 60 A (5)
  • Show More...

• Voltage Rating

  

  • 1000 V (2)
  • 12 V dc (2)
  • 120 to 277 V ac (8)
  • 120 V (8)
  • 120 V ac (8)
  • 120/227 V (4)
  • 120/240 V (2)
  • 120/277 (2)
  • 120/277 V ac (26)
  • 120V (7)
  • 125 (149)
  • 125 @ 60 hz V ac (5)
  • 125 V (97)
  • 125 V ac (36)
  • 125 VAC (8)
  • 125/250 (3)
  • 125/250 V (2)
  • 125/250 V ac (22)
  • 125V (14)
  • 24 V ac (2)
  • 24 V dc (5)
  • 250 (11)
  • 250 V (2)
  • 250 V ac (29)
  • 250;600 (12)
  • 277 VAC (2)
  • 35 (24)
  • 35 kV (2)
  • 480 (7)
  • 480 V (6)
  • 480 V ac (3)
  • 600 (7)
  • 600 V (96)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (2)
  • 600 V ac @ 50 to 400 Hz 250 V dc (2)
  • 600 V ac 3 Phase @ 50 to 400 Hz 250 V dc (2)
  • 600 V ac;250 V dc (4)
  • 600 VAC AT 50 TO 400 HZ, 250 VDC (27)
  • 600 VAC, 50 to 400 Hz, 250 VDC (5)
  • 600 VAC/VDC (2)
  • 600V (8)
  • 600V AC/DC (3)
  • 690 V ac (3)
  • Overall Dimension 4-1/16 Inch Width x 3-3/16 Inch Depth x 4-3/4 Inch Height; Fuel Type Natural; Capacity 23000 to 290000 BTU/Hour; Pressure Tapping 1/8 Inch Threaded with Plug; Pressure Regulator Set Point 3.5 Inch WC (2)
  • Show More...

• Number Of Gangs

  

  • 1 (22)
  • 1.0 (37)
  • 2 (11)
  • Show More...

• Number Of Wires

  

  • 2 (6)
  • 3 (352)
  • 3 in (3)
  • 3,4,5 (3)
  • 3.0 (12)
  • 3-Wire (39)
  • 3-Wire Grounding (5)
  • 4 (33)
  • 4-Wire (10)
  • Show More...

• Receptacle Type

  

  • 125 VAC 15 AMPERE 2 POLE 3 WIRE WITH GROUNDING STRAIGHT BLADE (2)
  • AFCI (2)
  • Blade (2)
  • Decorator (5)
  • Decorator Duplex (3)
  • Duplex (110)
  • Recessed Straight Blade (2)
  • Self Test Duplex (56)
  • Self Test GFCI (2)
  • Sierraplex (3)
  • Single (46)
  • Straight Blade (25)
  • Straight Blade Duplex (8)
  • Turnlock Single (10)
  • Show More...

• Power Rating

  

  • AC:1.1 VA (50Hz);1 VA (60Hz);DC:0.8 W (2)
  • AC:3 VA (50 Hz);2.5 VA (60 Hz);DC:1.5 W (5)
  • Show More...

• Color

  

  • Aluminum (9)
  • Beige (2)
  • Black (90)
  • Black/White (19)
  • Black;White (4)
  • Blue (20)
  • Blue Light (2)
  • Brass (2)
  • Brown (52)
  • Clear (3)
  • Clear/Transparent (2)
  • Colorless (3)
  • Copper (12)
  • Gray (98)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Gray (Standard);Black (Optional) (3)
  • Green (11)
  • Grey (2)
  • Ivory (86)
  • Light Almond (43)
  • MALLEABLE IRON (13)
  • Metallic (41)
  • Natural (2)
  • Nickel (2)
  • Orange (17)
  • Orchid (2)
  • Pink (10)
  • Polished Silver (3)
  • Purple (14)
  • Red (15)
  • Sandalwood (3)
  • Silver (24)
  • Sleeve: Yellow (2)
  • SNOW (2)
  • Steel (2)
  • STRGHT BLADE PLG&CONNEC (3)
  • Tin Plated Copper (3)
  • Unpainted (7)
  • White (140)
  • WHITE GLOSS (2)
  • Yellow (27)
  • Yellow (Handle) (2)
  • Yellow Handle (3)
  • Yellow;Black (4)
  • Show More...

• Nema Rating

  

  • 1 (7)
  • 10-30 (2)
  • 10-30R (2)
  • 10-50 (2)
  • 10-50R (2)
  • 12;13;4;4X (40)
  • 14-20 (2)
  • 14-30 (2)
  • 14-30R (3)
  • 14-50 (2)
  • 14-50R (2)
  • 15A (8)
  • 3R (17)
  • 4 (3)
  • 5-15 (2)
  • 5-15P (6)
  • 5-15P;5-15R (2)
  • 5-15P;NEMA WD-1 (2)
  • 5-15R (126)
  • 5-15R;NEMA WD-1 (2)
  • 5-20P;5-20R (2)
  • 5-20R (117)
  • 5-30R (2)
  • 6 (3)
  • 6-15R (3)
  • 6-20P (3)
  • 6-20R (8)
  • 6-20R;NEMA WD-1 (2)
  • 6-30R (2)
  • 6-50 (3)
  • 6-50R (2)
  • 78101111376 (2)
  • FB-1 (10)
  • L15-30R (2)
  • L16-20P;L16-20R (2)
  • L16-20R (2)
  • L16-30R (2)
  • L6-15R (2)
  • L7-20R (2)
  • L8-20R (2)
  • NEMA 1 (3)
  • NEMA 1-15R (2)
  • NEMA 3, 4, 4x (10)
  • NEMA 3, 4, 4X, 7BCD, 9FG (5)
  • NEMA 4X (4)
  • NEMA 5-15 (5)
  • NEMA 5-15R (22)
  • Nema 5-20R (14)
  • NEMA 6-20 (2)
  • NEMA 6-20R (3)
  • NEMA wd-1 (2)
  • NEMA Wd1;NEMA Wd5 (8)
  • NEMA WD-1;NEMA WD-6 (7)
  • NEMA Wd-6 (6)
  • NEMA Wd-6;NEMA 5-20R (5)
  • Non-NEMA (8)
  • Show More...

• Terminal Type

  

  • Blade (3)
  • Box Terminal (3)
  • Butt Splice (2)
  • Compression (13)
  • Compression;Crimp (9)
  • Insulation Displacement Connector (3)
  • Pin (10)
  • Ring Tongue (2)
  • Screw (61)
  • Screw;Clamp (4)
  • Show More...

• Wire Size

  

  • #12 to #10 (23)
  • #12 to #4 (3)
  • #14 - #10 (4)
  • #14 - #10 Awg (8)
  • #14 to #0 AWG (3)
  • #14 to #10 (4)
  • #14 to #10 AWG (4)
  • #14 to #12 (6)
  • #14 to #12 AWG (4)
  • #14 to #8 AWG (4)
  • #16 to #12 AWG (2)
  • #16 to #8 (14)
  • #18 to #10 AWG (16)
  • #18 to #12 AWG (10)
  • #18 to #6 AWG (2)
  • #18 to #8 AWG (6)
  • #18 to #8 AWG (Copper Conductor) (3)
  • #22 AWG (2)
  • 0 to #14 AWG (3)
  • 10 to 14 (3)
  • 10 To 8 AWG (Extra Flex) (8)
  • 10-6;10-8 (3)
  • 12 (3)
  • 14 - 0 AWG (3)
  • 14 - 10 (92)
  • 14 - 12 (17)
  • 2 To 1/0 AWG (Extra Flex) (2)
  • 2/0-14 AWG (2)
  • 250 MCM-6 AWG (3)
  • 3/0-6 AWG (2)
  • 350 MCM-6 AWG (5)
  • 350 To 500 MCM (2)
  • 4 (19)
  • 4 To 2 AWG (Extra Flex) (8)
  • 4-14 AWG (2)
  • 500 MCM-4 AWG (3)
  • 8 To 4 AWG (Extra Flex) (7)
  • extra flex: #10-#8;Regular stranding: #10-#6 (4)
  • extra flex: #4-#2;Regular stranding: #4-#2 (3)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Show More...

• Mounting Type

  

  • Box (43)
  • Box Mount (2)
  • Combination Flush/Surface Mount (3)
  • Cord Mounted (5)
  • DIN Rail Mount (2)
  • Flush Mount (60)
  • Flush Mount;Wall Mount (2)
  • Horizontal Mount (2)
  • Panel Mount (2)
  • Plug in Mount (13)
  • Plug Mount (3)
  • Push-On (3)
  • Receptacle (10)
  • Screw (2)
  • Screw Mount (95)
  • Surface Mount (4)
  • Threaded (11)
  • Wall Mount (97)
  • Show More...

• Actuator Type

  

  • Compact Toggle (2)
  • Control Circuit (34)
  • Toggle (37)
  • Show More...

• Contact Configuration

  

  • 1NO-1NC (3)
  • 2NC (4)
  • Double Pole (5)
  • DPDT (7)
  • SPDT (6)
  • Show More...

• Material

  

  • 14 GAUGE STEEL (2)
  • 16 GAUGE GALVANEAL STEEL (2)
  • 16 Gauge Steel (6)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (6)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (2)
  • 220 Meunt (3)
  • 221 Meunt (3)
  • 316 Stainless Steel (2)
  • Aluminum (52)
  • Aluminum (Body);Copperfree Aluminum (Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (6)
  • Body-Copper-free aluminum;Contacts-Brass;External screws-316 stainless steel;Spring tensioner-Patented beryllium copper (5)
  • Body-Copper-Free Aluminum;Contacts-Brass;Spring Tensioner-Patented Beryllium Copper;External Screws-316 Stainless Steel (3)
  • Brass (4)
  • Cast Aluminum (10)
  • COMPOSITE (5)
  • Copper (92)
  • COPPER ALLOY (3)
  • Copperfree Aluminum (3)
  • Copper-Free Aluminum (7)
  • Die Cast Zinc (12)
  • Die-Cast Zinc (55)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (12)
  • Epoxy Powder Coated Copper Free Aluminum (2)
  • Feraloy Iron Alloy with Electrogalvanized and Aluminum Acrylic Paint (Body/Gland Nut);Neoprene (Bushing) (4)
  • FERROUS (2)
  • Fiber Reinforced Thermal Plastic (3)
  • Flame-retardant Polypropelene (4)
  • Galvanized Steel (2)
  • Glass Reinforced Nylon (2)
  • Glass-Filled Nylon (12)
  • Gray Nylon (6)
  • HIGH IMPACT STRENGTH COPPER FREE ALUMINUM (21)
  • High Impact Strength Copper-Free Aluminum (4)
  • High Impact Strength Epoxy Powder Coated Copper Free Aluminum (2)
  • High Strength Glass Reinforced Nylon (3)
  • Impact Resistant Polymers (9)
  • Machined Aluminum (3)
  • Machined Steel (Body/Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (2)
  • Malleable Iron (41)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body);Steel (Ferrule, Caps);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Cap);Aluminum (Ferrule);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (13)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Metal (2)
  • Metallic (Enclosure) (2)
  • Mild Steel;Steel (7)
  • Neoprene (2)
  • Nickel-plated Brass (Plug Blades and Connector Contacts);NEoTEX(R) Paracril OZO rubber (Outer Housing and Grommet);Stainless Steel (Face Screws);Nylon (Face Insert);Brass (Wire Saddle Clamp) (4)
  • Non-Metallic (2)
  • Nylon (158)
  • Nylon (Face/Base) (3)
  • Nylon (Housing/Cord Clamp, Blade Holder);Clear Polycarbonate (Terminal Retainer);Brass (Contact, Terminal Screws);Nickel Plated Steel (Terminal Clamp, Assembly Screws) (3)
  • Nylon (Outer Shell/Interior Body);Polycarbonate (Terminal Retainer) (11)
  • Nylon (Toggle);PVC (Housing) (15)
  • Nylon (Top Housing);PVC (Bottom Housing) (16)
  • Nylon/PVC (5)
  • Plastic (30)
  • Plastic/Metal (3)
  • Polyamide/Nylon 6.6 (4)
  • Polymer Concrete (2)
  • Polypropylene/Urea (4)
  • Polyster (2)
  • Porcelain (2)
  • PVC (23)
  • Rubber (5)
  • Rubber (Super-Safeway Outer Housing);Stainless Steel (Face Screw);Nylon (Face Insert);Brass (Wire Saddle Clamp);Steel (Cord Clamp Screws) (2)
  • Santoprene[T] Thermoplastic Elastomeric Over Polypropylene (Outer Shell);Nylon (Interior Body) (4)
  • Silicon Bronze (Body;Screw) (2)
  • Solid Brass (3)
  • Stainless Steel (Mesh);Aluminum (Fitting) (2)
  • Stainless Steel (Strand);Aluminum (Body, Nut);Neoprene (Bushing) (2)
  • Steel (98)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel (Mesh);Aluminum (Threaded Body);Neoprene (Gasket) (3)
  • Steel with Zinc Electroplate and Chromate Finish Coat (Body, Gland Nut);Neoprene (Bushing) (24)
  • Thermoplastic (130)
  • Thermoplastic (Body);Nylon (Toggle) (7)
  • Thermoplastic (Top) (2)
  • Thermoplastic Elastomer (Body);Holder White Nylon (Blade );Clear polycarbonate (Terminal Retainer);Nickel plated brass (Blades, Terminal Screws );White Nylon (Core );Black Elastomer (Bushing & Cone Seal);Nylon (Gotcha Ring );PBT (Strain Relief Nut) (2)
  • Thermoplastic, Nylon 6/6 (Top Body);Thermoplastic, PVC (Bottom Body) (3)
  • Thermoplastic, Polypropylene (Top Housing);Thermoplastic, PVC (Bottom Housing) (14)
  • Thermoplatic (38)
  • Thermoset (Body);Nylon (Toggle) (5)
  • UL94V-0 Flame Retardant Plastic (4)
  • UV-Rated Plastic (10)
  • Vinyl (7)
  • Zamek-2, Zamek-3 Type Zinc Body and Nut, Neoprene Gasket, Lexan 920A Insuliner (10)
  • Zinc (28)
  • Zinc Cast (6)
  • Zinc Die Cast (11)
  • Zinc Die Cast with Spring Steel Inner Locking Ring (2)
  • Zinc Electroplated Steel (4)
  • ZINC PLATED STEEL (14)
  • Zytel ST801 Nylon (3)
  • Show More...

• Connection Type

  

  • Back and Side Wired (90)
  • Back Wire (17)
  • Compression (9)
  • E-Z Lock(R) (2)
  • F (3)
  • Female (4)
  • FMC (7)
  • Grounding (23)
  • Liquidtight (6)
  • Liquid-Tight (6)
  • Male (8)
  • Non Ground (4)
  • NPSM (6)
  • NPT (27)
  • Plug-In (13)
  • Pull Chain (2)
  • Rigid (7)
  • Screw (105)
  • Screw Terminal (10)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (2)
  • Set Screw (14)
  • Side Wire (23)
  • Side Wire;Push Wire (2)
  • Single Screw Strap-Type (2)
  • Snap-In (7)
  • Squeeze (17)
  • Straight (46)
  • Straight Male (46)
  • Straight Male NPT (10)
  • Terminal Screws (3)
  • Threaded (102)
  • Threaded Hub (8)
  • Threaded x Push In (3)
  • Threaded x Screw-In (6)
  • Type F (5)
  • Wire Ground (19)
  • Show More...

• Finish

  

  • #4 Polished Finish (3)
  • Aluminum (12)
  • Baked Powder Epoxy/Polyester Finish (3)
  • Ball burnish (34)
  • Ball Burnished;Mirror Smooth (41)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Black (2)
  • Chromate, Epoxy Powder Coat/Zinc Electroplated (3)
  • COPPER (17)
  • Electro Zinc Plated/Chromate Coating (3)
  • ELECTROGALVANIZED (12)
  • Electrogalvanized with Aluminum Acrylic Paint (10)
  • Electrogalvanized With Aluminum Acrylic Painted (3)
  • EPDM Rubber Insulated (3)
  • Galvanized (31)
  • Gray (2)
  • Matte (121)
  • Metallic (2)
  • Molded (2)
  • Natural (33)
  • NICKEL CHROME PLATED (8)
  • Nickel Plated (5)
  • Nickel Plated (Blade, Terminal Screw) (2)
  • Nickel Plated (Plug Blades and Connector Contacts) (4)
  • Nickel Plated (Plug Blades and Connector Contacts);Zinc-plated (Cord Clamp Screw) (2)
  • Nickel Plated (Terminal Clamp, Assembly Screw) (3)
  • NO FINISH (19)
  • Other;Zinc Plated (9)
  • Painted (2)
  • Phosphate Undercoat or Acrylic Electrocoat (2)
  • Plastisol Insulated (16)
  • Powder Coated (12)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • SATIN (11)
  • Silver (3)
  • Steel (2)
  • Thermal Plastic (3)
  • Tin Plated (45)
  • Tinned (16)
  • Tin-Plated (2)
  • Untreated (9)
  • Wash and Phosphate Undercoat;ANSI 61 Gray Acrylic Electrocoat Finish (9)
  • Zinc Electro Plated (10)
  • Zinc Electroplate (3)
  • Zinc Electroplated (104)
  • Zinc Electroplated With Chromate Coated (25)
  • Zinc Electroplated/Chromate Coating (16)
  • Zinc Electroplated;Chromate And Epoxy Powder Coat/Zinc Electroplate (2)
  • Zinc Plated (57)
  • Zinc Plated (Bridge) (8)
  • Show More...

• Diameter

  

  • 0.25 to 0.66 in (Cord) (2)
  • 0.33 to 0.66 in (Cord) (6)
  • 0.813 in (2)
  • 0.820 to 0.840 in (Outer);0.622 to 0.642 in (Inner) (3)
  • 0.94 in;23.9 mm (2)
  • 0.975 in (5)
  • 1 in (5)
  • 1.01 in (2)
  • 1.19 in (3)
  • 1.220 in (5)
  • 1.23 in (10)
  • 1.25 in (3)
  • 1.25 in;31.8 mm (5)
  • 1.250 in (2)
  • 1.3 in (2)
  • 1.43 in (2)
  • 1.46 in (2)
  • 1.5 in (2)
  • 1.51 in;0.250 to 0.656 in (Cord) (2)
  • 1.51 in;0.33 to 0.66 in (Cord) (3)
  • 1.516;0.230 to 0.690 in (Cord) (7)
  • 1.527 in;38.78 mm (3)
  • 1.54 in;0.25 to 0.66 in (Cord) (2)
  • 1.563 in (2)
  • 1.58 in (3)
  • 1.656 in (4)
  • 1.75 in (2)
  • 1.75 in;44.5 mm (2)
  • 1.78 in (2)
  • 1.81 in;45.9 mm (2)
  • 1.813 in (2)
  • 1.85 in;47.1 mm (2)
  • 1.97 in (Width) (4)
  • 1-1/16 in (2)
  • 1-1/2 in (7)
  • 1-1/32 in (4)
  • 1-1/8 in (5)
  • 1-11/16 in (2)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/16 in (2)
  • 1-13/32 in (2)
  • 1-15/16 in (4)
  • 1-17/32 in (4)
  • 1-3/16 in (2)
  • 1-3/4 in (4)
  • 1-3/8 in (8)
  • 1-5/16 in (4)
  • 1-7/16 in (4)
  • 1-7/32 in (3)
  • 1-7/8 in (3)
  • 2 in (8)
  • 2.062 INCH (2)
  • 2.20 in;0.225 to 1.150 in (Cord) (4)
  • 2.20 in;0.750 to 1.150 in (Cord) (4)
  • 2.25 in (6)
  • 2.31 in;58.7 mm (2)
  • 2.38 in (2)
  • 2.75 INCH (2)
  • 2-1/4 in (2)
  • 2-1/8 in (3)
  • 2-11/16 in (3)
  • 2-3/16 in (2)
  • 2-3/4 in (3)
  • 2-3/8 in (3)
  • 2-5/32 in (3)
  • 2-5/8 in (6)
  • 3 in (6)
  • 3.19 in;81 mm (2)
  • 3.25 in;0.38 to 1.00 in (Cord) (3)
  • 3-1/8 in (2)
  • 3-11/16 in (2)
  • 3-13/16 in (3)
  • 3-3/16 in (2)
  • 3-3/8 in (2)
  • 3-7/16 in (2)
  • 4 in (2)
  • 4-1/2 in (2)
  • 4-1/32 in (2)
  • 4-13/16 in (4)
  • 4-5/16 in (3)
  • 5 in (3)
  • 5-1/8 in (2)
  • 7/8 in (2)
  • Show More...

• Frequency Rating

  

  • 50/60 Hz (4)
  • 60 Hz (50)
  • Show More...

• Dimensions

  

  • 0.0100 IN X 0.0100 IN X 0.0100 IN (2)
  • 0.260 to 0.305 (Dia) in (3)
  • 0.87 (D) x 1.13 (W) in;3.28 in (Screw to Screw) (2)
  • 1.015 (D) x 4.193 (H) in (2)
  • 1.2400 IN X 0.7900 IN X 4.0000 IN (30)
  • 1.30 (L) x 0.920 (W) x 4.20 (H) in (16)
  • 1.3000 IN X 0.6900 IN X 3.8100 IN (14)
  • 1.3000 IN X 0.8400 IN X 4.1900 IN (8)
  • 1.3000 IN X 0.8500 IN X 4.1900 IN (2)
  • 1.3000 IN X 0.8700 IN X 4.1900 IN (12)
  • 1.3000 IN X 0.8800 IN X 4.1900 IN (9)
  • 1.3000 IN X 0.8800 IN X 4.2000 IN (5)
  • 1.3000 IN X 0.8900 IN X 4.1900 IN (4)
  • 1.3000 IN X 1.0900 IN X 4.1900 IN (2)
  • 1.3100 IN X 0.6900 IN X 4.1900 IN (14)
  • 1.3100 IN X 0.7400 IN X 4.1900 IN (6)
  • 1.3100 IN X 0.8300 IN X 3.2800 IN (3)
  • 1.3100 IN X 0.8300 IN X 4.1900 IN (6)
  • 1.3100 IN X 0.8700 IN X 4.1900 IN (6)
  • 1.3100 IN X 1.0700 IN X 1.0700 IN (9)
  • 1.320 (L) x 1.073 (W) x 3.281 (H) in (7)
  • 1.3200 IN X 0.8400 IN X 4.1900 IN (13)
  • 1.3200 IN X 0.8800 IN X 4.1900 IN (4)
  • 1.37 (W) x 0.88 (D) in (2)
  • 1.4000 IN X 1.3000 IN X 3.8100 IN (2)
  • 1.4000 IN X 1.3000 IN X 4.1900 IN (7)
  • 1.4400 IN X 1.4000 IN X 1.4400 IN (2)
  • 1.49 in (L) x 1 in (W) x 4.18 in (H) (8)
  • 1.5600 IN X 1.1300 IN X 1.1300 IN (2)
  • 1.6700 IN X 1.4900 IN X 1.6700 IN (2)
  • 1.7200 IN X 1.9900 IN X 1.7200 IN (2)
  • 1.7500 IN X 1.2500 IN X 1.2500 IN (3)
  • 1.8800 IN X 1.6300 IN X 1.6300 IN (2)
  • 1.9100 IN X 1.7500 IN X 4.4000 IN (6)
  • 1.9100 IN X 1.7800 IN X 4.1300 IN (5)
  • 10.8000 IN X 4.1300 IN X 4.1300 IN (4)
  • 11.5000 IN X 3.4400 IN X 3.4400 IN (3)
  • 196.8000 IN X 0.5800 IN X 0.5800 IN (2)
  • 2.0000 IN X 1.2300 IN X 1.2300 IN (3)
  • 2.0000 IN X 4.8130 IN X 4.6250 IN (5)
  • 2.0200 IN X 1.2300 IN X 1.2300 IN (7)
  • 2.0540 IN X 2.8530 IN X 3.1950 IN (5)
  • 2.0600 IN X 0.8100 IN X 0.8100 IN (2)
  • 2.2300 IN X 2.5900 IN X 2.1000 IN (4)
  • 2.2500 IN X 1.8800 IN X 2.5600 IN (5)
  • 2.3700 IN X 1.7100 IN X 2.3700 IN (2)
  • 2.3800 IN X 1.6600 IN X 1.6600 IN (4)
  • 2.3800 IN X 1.7800 IN X 1.7800 IN (2)
  • 2.3800 IN X 2.4400 IN X 2.4400 IN (2)
  • 2.5000 IN X 1.5000 IN X 1.5000 IN (2)
  • 2.5000 IN X 5.0000 IN X 10.0000 IN (3)
  • 2.6000 IN X 1.5000 IN X 1.5000 IN (4)
  • 2.7500 IN X 2.0000 IN X 4.3600 IN (9)
  • 2.8130 IN X 2.0000 IN X 4.6250 IN (7)
  • 2.8150 IN X 2.0100 IN X 4.6250 IN (7)
  • 2.8230 IN X 2.0100 IN X 4.6350 IN (5)
  • 2.8800 IN X 3.3800 IN X 3.3800 IN (5)
  • 24.0000 IN X 6.0000 IN X 6.0000 IN (2)
  • 3.1400 IN X 2.2500 IN X 2.2500 IN (2)
  • 3.2100 IN X 2.2500 IN X 2.2500 IN (2)
  • 3.2300 IN X 1.7400 IN X 3.2300 IN (2)
  • 3.2500 IN X 2.9400 IN X 2.3800 IN (3)
  • 3.2700 IN X 2.2500 IN X 2.2500 IN (2)
  • 3.4400 IN X 3.0000 IN X 3.0000 IN (3)
  • 3.5000 IN X 8.0000 IN X 6.7200 IN (4)
  • 3.6300 IN X 3.3800 IN X 4.5000 IN (3)
  • 3.8800 IN X 2.9400 IN X 2.2500 IN (3)
  • 3.9100 IN X 1.6000 IN X 1.6000 IN (2)
  • 4.1900 IN X 2.2800 IN X 2.3100 IN (5)
  • 4.2500 IN X 2.0000 IN X 1.7500 IN (5)
  • 4.2500 IN X 2.0000 IN X 2.0000 IN (4)
  • 4.2500 IN X 4.5000 IN X 4.5000 IN (3)
  • 4.3800 IN X 1.9100 IN X 1.7800 IN (4)
  • 4.5000 IN X 1.7500 IN X 1.8800 IN (3)
  • 5.2500 IN X 4.2500 IN X 4.2500 IN (5)
  • 6.5000 IN X 2.3100 IN X 2.3100 IN (3)
  • 6.6000 IN X 2.5600 IN X 2.5600 IN (4)
  • 78.7200 IN X 1.0000 IN X 1.0000 IN (2)
  • 8.3000 IN X 2.3100 IN X 2.3100 IN (3)
  • Show More...

• Length

  

  • 0.8 (2)
  • 0.81 in;20.6 mm (4)
  • 0.88 in;22.4 mm (2)
  • 0.94 in;23.9 mm (2)
  • 1 (2)
  • 1 in (7)
  • 1.03 (36)
  • 1.03 in (2)
  • 1.05 in (2)
  • 1.13 in (4)
  • 1.24 in (13)
  • 1.25 in (4)
  • 1.250 in (4)
  • 1.29 in (10)
  • 1.296 in (4)
  • 1.30 in (19)
  • 1.31 in (8)
  • 1.32 in (21)
  • 1.320 in (12)
  • 1.322 in (15)
  • 1.34 in (3)
  • 1.380 in (2)
  • 1.43 in (3)
  • 1.438 in (2)
  • 1.476 (2)
  • 1.50 in (2)
  • 1.530 in (2)
  • 1.54 in (2)
  • 1.563 in (3)
  • 1.61 in (2)
  • 1.62 in (6)
  • 1.625 in (2)
  • 1.63 in (3)
  • 1.63 in;41.4 mm (2)
  • 1.65 in (2)
  • 1.68 in (5)
  • 1.69 in (2)
  • 1.72 in (2)
  • 1.73 in (2)
  • 1.75 in (4)
  • 1.81 in (3)
  • 1.813 in (2)
  • 1.83 in (2)
  • 1-1/16 in (3)
  • 1-1/2 in (5)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 12 INCH (2)
  • 1-25/32 in (3)
  • 1-27/32 in (4)
  • 1-3/4 in (10)
  • 1-5/16 in (10)
  • 1-5/8 in (4)
  • 1-7/16 in (2)
  • 1-7/8 in (2)
  • 2 in (17)
  • 2.063 in (5)
  • 2.12 in (2)
  • 2.2 in (2)
  • 2.25 in (3)
  • 2.3 in (2)
  • 2.375 in (3)
  • 2.376 in (4)
  • 2.44 in (2)
  • 2.5 in (11)
  • 2.500 in (2)
  • 2.56 in (2)
  • 2.59 in (2)
  • 2.638 in (3)
  • 2.74 in (2)
  • 2.75 in (2)
  • 2.78 in;70.64 mm (3)
  • 2.791 in (4)
  • 2.8 in (5)
  • 2.875 (2)
  • 20.6 in (2)
  • 2-1/2 in (3)
  • 2-1/4 in (2)
  • 2-1/8 in (2)
  • 2-11/16 in (6)
  • 2-15/16 in (3)
  • 2-23/32 in;69.1 mm (2)
  • 2-3/16 in (2)
  • 24.00 In (6)
  • 2-41/64 in (3)
  • 2-5/16 in (2)
  • 2-5/8 in (4)
  • 2-7/8 in (2)
  • 2-9/16 in (2)
  • 3 in (6)
  • 3.001 in (2)
  • 3.126 in (2)
  • 3.25 in (4)
  • 3.28 in (8)
  • 3.3 in (17)
  • 3.438 in (3)
  • 3.84 in (4)
  • 3-1/2 in (2)
  • 3-1/4 in;82.6 mm (2)
  • 3-3/4 in (3)
  • 3-3/4 in;95.3 mm (2)
  • 3-7/32 in (4)
  • 4.00 in (3)
  • 4-1/2 in;114.3 mm (2)
  • 4-1/4 in (5)
  • 4-23/32 in (2)
  • 4-3/32 in (2)
  • 4-3/4 in (2)
  • 48.00 in (3)
  • 5.200 in (2)
  • 5/8 in (3)
  • 6 (2)
  • 6 INCH (7)
  • 7/8 in (3)
  • 8 INCH (4)
  • Show More...

• Width

  

  • .780 (9)
  • .833 (4)
  • .900 (3)
  • 0.47 in (3)
  • 0.65 in (2)
  • 0.69 in (9)
  • 0.78 in (9)
  • 0.780 in (4)
  • 0.79 in (12)
  • 0.82 in (5)
  • 0.83 in (10)
  • 0.84 in (2)
  • 0.87 in (5)
  • 0.922 in (2)
  • 0.960 in (6)
  • 1 in (11)
  • 1.0 in (9)
  • 1.015 in (9)
  • 1.03 in (2)
  • 1.08 (2)
  • 1.08 in (7)
  • 1.093 (4)
  • 1.12 in (3)
  • 1.190 in (4)
  • 1.25 (5)
  • 1.26 in (4)
  • 1.27 in (3)
  • 1.28 in (2)
  • 1.3 in (11)
  • 1.36 in (2)
  • 1.7 in (8)
  • 1.73 (37)
  • 1.73 in (2)
  • 1.750 (4)
  • 1.878 in (2)
  • 1.9 in (4)
  • 10.2 (2)
  • 14.2 (3)
  • 14.31 (4)
  • 1-5/8 in (3)
  • 18.2 (2)
  • 2.2 in (7)
  • 2.25 (5)
  • 2.41 in (4)
  • 2.50 in (2)
  • 2.75 in (3)
  • 22.2 (3)
  • 2-5/16 in;59 mm (2)
  • 28.2 (2)
  • 34.2 (3)
  • 4 (3)
  • 4.00 In (4)
  • 4.2 (6)
  • 4.20 in (4)
  • 6 (4)
  • 6.00 In (6)
  • 8 (6)
  • Show More...

• Height

  

  • 0.453 in (5)
  • 1.23 in (4)
  • 1.31 in (4)
  • 1/2 in (4)
  • 12 (2)
  • 14.2 (3)
  • 1-7/8 in (2)
  • 2.56 (5)
  • 22.2 (2)
  • 3.27 in (3)
  • 3.28 (3)
  • 3.28 in (33)
  • 3.281 (16)
  • 3.281 in (15)
  • 3.31 in (20)
  • 3.68 (6)
  • 3.75 (4)
  • 3.75 in (10)
  • 3.812 in (3)
  • 3.813 (4)
  • 3.82 (4)
  • 3.88 (2)
  • 3/4 in (3)
  • 3/8 in (2)
  • 34.2 (3)
  • 4 (4)
  • 4.00 in (15)
  • 4.19 in (18)
  • 4.190 in (2)
  • 4.193 in (12)
  • 4.2 (5)
  • 4.20 in (42)
  • 4.478 in (2)
  • 4.50 in (4)
  • 5.19 (2)
  • 5.65 in (5)
  • 6 (6)
  • 6.00 In (4)
  • 6.48 (6)
  • 6-23/32 (5)
  • Show More...

• Special Features

  

  • "Increased Safety" Type Box Terminals with Gripper Ribs Securely Clamp Around Conductors (3)
  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 8 AWG (STR) - 3/8 Mounting Hole (2)
  • 1/2 in Size A;1/2 in Size B;Cast Process;AFCI Lock Out Receptacle (3)
  • 10 kA Short Circuit Rating;20 Amp Feed-Thru Capacity (28)
  • 10 Replacement Sleeves Per Bag (3)
  • 15A AFCI (3)
  • 20 Amp Feed-Thru Capacity (4)
  • 2pc Cord Grip Accepts Wide Cord (2)
  • 4 Removable Bins with Removable Dividers;Clear, Stay-Put Lid Design;IP65 Rated (3)
  • 4Q fittings have plain throat (non-insulated);Bonding wedge locknuts are recommended in hazardous locations;Compact, slim diameter with small turning radius;Furnished with locknut and knockout sealing ring;Hot dip or mechanically galvanized finish optionally available;Inspection windows in ferrule to ensure full en;Intrinsically safe;Liquidtight/raintight/oiltight/concretetight;Long ferrule prevents pullout and tight bend conduit pop-out;O-Z/Gedney fittings are used with liquidtight flexible metal conduit (3)
  • 50 Micron Gold Plated Contacts (2)
  • 7/8-1 Rod Size - 1/2-3/4 Pipe Size (2)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (2)
  • Aluminum construction resists corrosion. Neoprene grommet seals out oil and moisture. Nylon retention ring ensures superior holding power. (6)
  • Aluminum Cord Connector Provides Durable Performance (2)
  • Aluminum Cord Connector Provides Durable Performance;Knurled Finish Makes Them Easy to Handle and Maintain UL Listing by Hand Tighteningul Listing by Hand Tightening;Lightweight Design (10)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (3)
  • Anti-oxidant and anti-seizing compound improves efficiency and service life of aluminum-to-aluminum and aluminum-to-copper electrical connections; Suspended zinc particles penetrate and cut aluminum oxide; Provides additional interstrand and inter-conductor current paths for improved conductivity and cooler connections; Carrier material excludes air to prevent further oxidation; Reduces galling and seizing and promotes good ground continuity on aluminum conduit joints; Improves service life of aluminum ele (4)
  • Arc-Resistant Plastic;Dead Front Design & Double Wire Contact (14)
  • Audible alarm, auto-ground (2)
  • Auto Grip Straight Body;Wiring Type Back Wire (3)
  • Auto Grip Straight Body;Wiring Type Back Wire;Grounding (2)
  • Auto Ground Clip;Back & Side Wire;Zinc Steel Strap (7)
  • Back & Side Wire;Heavy Duty Compact Design (3)
  • Back & Side Wire;Locking Support;Heavy Duty Toggle (6)
  • Back & Side Wire;Plated Steel Strap (4)
  • Back & Side Wire;Tri Drive Terminal & Mounting Screws (2)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (3)
  • Child Safe;Side Wire;Self Grounding (2)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (3)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;Copper free (4/10 of 1 PCT or less) aluminum cap;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension (4)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Machined steel cap;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord;Steel or Tefl (5)
  • Commercial Grade (52)
  • Commercial grade deco (12)
  • Compact design with small turning radius;Copperfree (4/10 of 1 PCT of copper or less) aluminum;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;Full, machined tapered threads (NPT);High corrosion resistance;Machine tool building, motor and transformer terminations, robotics assembly, air conditioning equipment installation and other applications that require flexibility and protection against entry of liquids, vapors or solids;Seals out (3)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Steel compression nut;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (3)
  • Concrete Tight (4)
  • Concrete Tight;Threadless (13)
  • Concrete Tight;Three Pieces (6)
  • Concretetight (16)
  • Concrete-Tight (41)
  • Concrete-tight when taped (3)
  • Concretetight;Raintight (6)
  • Concrete-Tight;Raintight (29)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (10)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (2)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (7)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (16)
  • Corrosion Resistant Contact (3)
  • Corrosion Resistant;Multiweave Grip Gives Cable Arc-Of-Bend Control;Easy Cable/Flexible Conduit Installation (2)
  • Corrosion Resistant;One-Piece Design with Machined Threads;Tapered Interior Seats the Bushing Evenly for a Liquidtight Seal (2)
  • Corrosion Resistant;Thinner and Lighter Weight Construction (10)
  • Corrosion-resistant, plated and tabbed steel strap locked in to face and back body to resist pulling away from face/body assembly. .032 inch thick, brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face. 8 hole internal screw-pressure-plate back wire terminals accept #14 – #10 AWG solid or stranded copper or copper-clad conductors. Terminal compartments isolated from each other for posi (3)
  • Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly. .032 inch thick, brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face and thermoplastic back body. Accepts #14 - #10 AWG solid or stranded copper or copper-clad wire. Terminal compartments isolated from each other for positive conductor containment. Tri-drive termina (4)
  • Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly. One-piece brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face and thermoplastic back body. Internal screw-pressure-plate back wire capable of accepting #14 - #10 AWG solid or stranded copper or copper-clad wire. Terminal compartments isolated from each other for pos (4)
  • Corrosion-resistant, plated steel strap locked into assembly to prohibit strap from bending away from body. One-piece, brass, triple-wipe power contacts for lasting retention. Heavy-duty compact design for easier installation and long lasting performance. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant nylon face. Terminal compartments isolated from each other for positive conductor containment. Side and internal screw-pressure-plate back wire ac (2)
  • Cover included (2)
  • Cover is Held Secure By Sliding it Under the Top End Flangeand Fastening it With Plated Screws on the Bottom Endflange;Sealing Screws and Lances are Located at Each End of Thewireway Cover wireway Exceeding 72 inches in Length has Two Covers, Aremovable Center Channel and Body Supports (2)
  • Dedicated Circuit Pole Features Separate Isolated Ground Circuit Protection (2)
  • Degree of protection: IP20, IP10 (3)
  • Dielectric Strength 2000 V (3)
  • Double Pole;Corrosion Resistant Contact (2)
  • Dual Mechanical Shutter System to Help Prevent Insertion Of Foreign Objects. Two Drive Screws Anchor Strap to Back Body and Face Where Abrupt Removal Torque Is Greatest.Zinc-Plated Steel Strap for Added Strength. Backed-Out (2)
  • Dual Usb Charging Ports Charge Most Compatible Electronic Devices That Charge Via a 5v Power Adapter (4)
  • Ease of assembly and disassembly of STNM connectors permits make-up of harnesses in advance for fast, simple connections during production line assemblies;Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals;It cannot bend or twist the conduit and thereby protects wiring;The nut rides only on the sleeve and not on the conduit;The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wal (5)
  • Easy Installation;No Special Tools Required (15)
  • EdgeConnect™ Technology, Screwless Termination (3)
  • Electro-Tin Plated (2)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • Excellent Conductivity;Double Dovetail Design (4)
  • Excellent Conductivity;Double Dovetail Design;Raised Ribs Provide Non-Slip Gripping Profile For Turning to Lock and Unlock (4)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Explosionproof;Dust Ignitionproof (7)
  • Extended Range with Superior Strain Relief;Reduced Overall Size, Fits Into tighter Spaces;Gland Nut Designed to Restrict Cable Bending (2)
  • Factory-terminated devices and connectors mean that device installation is the same regardless of skill level of the installer. The UL-Listed connectors are keyed to ensure proper wiring installation into each hospital-grade receptacle. The connector simply snaps into the back of the device—information, visit our PlugTail Headquarters.;no fussing with wires, stripping or tightening screws. PlugTail devices are finger safe with no exposed terminals, so taping is not required. Now installation is a sna (3)
  • Features: 12 Gauge Wire (2)
  • Features: F Connectors Utilize Threaded Couplings And Cable Conductors As Contacts For CATV And Other UHF Applications; After Cable Is Stripped, Simply Twist On Connector; No Termination Tool Required; Available In Two Styles, RG-6 And 59; Coaxial Cable Type: RG-6 (2)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Fits 60 Pct Reg/Tri/Quad Cable;Nickel-Plated, Brass-Construction for Superior Corrosion Resistance;Approved for Use By Satellite and Cable Tv Companies;Approved for Indoor and Outdoor Use;Use 30-603, 30-793 or 30-633 Compression Tools (3)
  • Flame Retardant (7)
  • Flush Mount (3)
  • Flush-mountapplications (3)
  • For use in Wet Locations in Canada Only (9)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (2)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (2)
  • Furnished with 2-way Phillips/Slotted Head Screw (21)
  • Furnished with locknut; Male hub threads-NPS (2)
  • Furnished with Tri-Drive screw (3)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (13)
  • Got Nail!™ bar hangers (2)
  • HCF (2)
  • Hcf/Hcfmci-A (4)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (13)
  • Hospital Grade (12)
  • Hospital grade deco (2)
  • If No Gfci Protection Is Present;The Receptacle Will Render Itself Inoperable and a Red Indicator Light Will Glow Notifying The User There Is No Power and The Device Must Be Replaced. (27)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (6)
  • Includes shutter mechanism (shutters are white). Wallplate sold separately. (2)
  • Individual Wiring Terminals Completely Enclosed;Fast Lead Assembly Screws;Beveled Housing Prevents Snagging (3)
  • Industrial grade (7)
  • Industrial Grade Straight Blade Devices;1.37 in Tip to Tip Width;1.50 in Base (2)
  • Industrial Grade Straight Blade Devices;1.46 in Receptacle Width (2)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 degree C (3)
  • Internal Shutter System;Side Wire;Low Profile Face (5)
  • IP20 (8)
  • Isolated Ground (4)
  • K.O. Size 1/2" (2)
  • Knockout Bushing (6)
  • Large Cable Clamping Range;Liquid Tight Mechanical Grip;Full Length Busing Seal Protects Cable;Extended Pull Out Performance;Corrosion Resistant (3)
  • Liquid Tight;Strain Relief (8)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (3)
  • Long Barrel;High Conductivity (11)
  • Longer;Wider Strap Provides 40% More Contact Area to Wall Board;Virtually Eliminating Floating Installations (2)
  • Made from Heavy Wall, Extruded, High Conductivity Copper;For Power Connector Applications up to 35kv (5)
  • Made of 1350 Aluminum Alloy for high strength and high conductivity. Standard Compression tools and dies install all sizes - no special tools needed. Field-proven ribbed design enables excellent connector/conductor contact without distorting the conductor's shape. Fold-in tabs provide tab interlock as tool closes. Prefilled with oxide inhibitor held captive in the rib/connection area (2)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Marked with Die Index and Color Coded (2)
  • Matching Standard Size Thermoplastic Wallplate Included (2)
  • Material Flame Retardant Polypropylene (3)
  • Maximum Panel Thickness 3/16 In (3)
  • Meets Coast Guard CG293 (9)
  • Modular flush wall jack assembly allows flush-mounted connection of plug-ended modular line cords; Ideal for initial installation or conversion from existing wall receptacles; 50 UIN of gold plating contact; Package: Bulk Pack (2)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation;Transparent Wiring Guide to Verify All Wire Strands Are In Place Before Securing Wire (2)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Resists Vapor And Water From High-Pressure Wash Down Up to 1000psi;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation (2)
  • NEMA 3R Enclosure (2)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • Nylon Cord Connector Resists Most Common Industrial Corrosives;Provides Effective Pullout Protection;Lightweight Design (3)
  • One-piece nickel-plated brass mounting strap with integral ground. Strap tabs wrap around and lock down on face to prevent strap from separating from face and back body. Two drive screws anchor strap to back body and face. Exclusive patented feature, circuit label on face allows permanent circuit identification. .040 inch thick, nickel-plated brass, triple-wipe power contacts for lasting retention. Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. Impact-resistant (2)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • Packaging Type Box (3)
  • Pass & Seymour invented the GFCI receptacle, and at Legrand, we're constantly reinventing it to ensure the highest level of safety possible. From the most advanced self-testing device to audible alarms to nightlight combos, we're continuously resetting the bar on GFCI innovation and safety. (5)
  • Patent Pending Spring Cup Toggle Design for Robust Actuation (2)
  • Plastic Insulator Rated 105 Degree C (6)
  • Power Rating 1 Hp (6)
  • Power Rating 1 Hp;Side Wire (4)
  • Prevents Line-Load Miswire;No Power to The Face or Downstream if Wired Incorrectly (2)
  • Protects Children:Patented Shutter System Helps Prevent Improve (2)
  • Provide Exceptional Durability and Performance;Floating Blade Construction Provides Self-Alignment and a Better Mechanical and Electrical Connection Minimizing Wear and Heat Generation (2)
  • Provide strain relief to protect the cord or cable;UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub;Watertight/oiltight (7)
  • provides a concrete tight connection when taped;tri-head screws;zinc electro plated (6)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (14)
  • Provides Secure Cable Termination and Prevents Cable Pullout;Absorbs Longitudinal Stresses Placed on the Point of Termination Caused by Pulling or Bending the Cable;Supplied with Locknut, Nylon Insulated Bushing and Neoprene Gasket to Provide a Dirt and Dust Free Seal;Wide Range, Single Weave Mesh Construction (3)
  • Push-On Installation;No Tools (9)
  • Quick Connect wiring connectors included in junction box (2)
  • Quick Installation, Cuts with Utility Knife or PVC Cutter (3)
  • Quickloop Wire Aid;Side Access Push Wire Release (5)
  • Raintight (9)
  • Ready to wire, nylon housing, rugged 2pc cord grip (3)
  • Ready to wire, rugged 2pc cord grip & internal dust shield (2)
  • Ready to Wire;Rugged 2pc Cord Grip & Internal Dust Shield (3)
  • Resists Corrosion, Abrasion, Oil, Water, Acid, Metal Shavings, & Rough Environments;Resists Abuse, Pull & Crushing;Outdoor, Sunlight Resistant, Direct Burial;Light Weight & Lower Installed Cost;Quick Installation, Cuts With Utility Knife or PVC Cutter (8)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, & Common Solvents;Lower Installed Cost;Flammability Classification 94V-2;Temperature Index 125° C (6)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, and Common Solvents;Lower Installed Cost;Molded of Type Nylon 6. Flammability Classification 94v-2:Temperature Index 125°C (6)
  • Reverse Service (5)
  • Robust spring design for high performance holding power (6)
  • Rounded Surface of Bushing (10)
  • Rubber Housing;Nickel Plated Blades & Contacts (2)
  • Rugged Construction protects Cord from Damage;Compact Design Permits close Spacing of Fittings on panel Applications;Tightening One Nut Creates Watertight Seal;Male Tapered Thread NPT (12)
  • Rugged Metallic Construction;Watertight (4)
  • Rugged, Durable Construction Protects Cords and Cables from Damage and Compact Design;Weatherproof Seal on Outer Sheath of Cable (28)
  • Safety Grip Straight Body;Wiring Type Back Wire (2)
  • Sealing Ring and Groove with Innovative Profile Better Than Standard O-Ring (9)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • Seals Out Oil, Water, Dust, Dirt and Fumes;Unique Long Ferrule with More Pronounced Threads Provides Over Four Times Ul Pull-Out Requirements;Ferrule Provides Maximum Surface Contact for Better Sealing and a Continuous, Permanent, Positive Metal-To-Metal Ground;Liquidtight/Raintight/Oiltight;Compact Design with Small Turning Radius (3)
  • Self Grounding (4)
  • Severe Duty Straight Body;Wiring Type Back Wire (2)
  • Side Wire;Duplex;Tri-Driver Terminal & Mounting Screws (10)
  • Side Wire;Easily Accessed Break Off Line Contact (2)
  • Side Wire;Low Profile Face (3)
  • Side Wire;Self Grounding;Quickloop Wire Looping Aid (6)
  • Single Pole;Corrosion Resistant Contact (2)
  • Smooth Body Design (2)
  • Solid-state LED monitor has 25-year minimum life expectancy. A high visibility, wide-angle lens indicates protection is in place. LED Indication: steady green = protected, flashing red = not protected, OFF = no power to unit. Audible alarm alert of MOV damage. Alarm able to be turned On/Off. Wrap-around steel strap for structural integrity. Auto-ground is standard, for easier installation. Impact-resistant nylon exterior resists impacts and scrapes. Triple-wipe, copper-alloy contacts for superior, more dep (3)
  • Spec grade plugs & conns (3)
  • Specification Grade and Wiring Type Back and Side Wire (9)
  • Stainless Steel Mesh is Corrosion Resistant;Multiweave Grip Gives Cable Arc-of-Bend Control;Endless Weave Provides Easy Cable/Flexible Conduit Installation (2)
  • Standard (8)
  • Standard grade (8)
  • Standard grade deco (16)
  • Standard Grade;Wiring Type Back and Side Wire (3)
  • Standard Grade;Wiring Type Back and Side Wire;Impact Resistant (2)
  • Standard Grade;Wiring Type Side Wire and Push Wire (15)
  • Standard Product (18)
  • Steel Crimp Sleeves - 100 Pcs Blister (2)
  • Strong and Durable Construction (12)
  • Surface Mount (3)
  • Surface mount & power receptacles (3)
  • Tamper Resistant (6)
  • Tamper Resistant Wiring Type Back & Side Wire (2)
  • Tamper-resistant (3)
  • Terminals Have Pressure Plates to Protect Wires (2)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (2)
  • Three Piece (2)
  • Tri-Combo Head Mounting and Terminal Screws Ease Installation (6)
  • Trip Threshold:5±1ma;Prevents Line-Load Reversal Miswire (2)
  • Ultra Grip;3 Phase;Back Wire Terminal Clamps For Easy Secure Wiring (4)
  • Ultrasonically welded polycarbonate connector housing secures terminations and conductors in a UL Listed, finger safe housing. Large brass contacts snugly terminate on device blade terminals. Pre-stripped connector leads fasten to conductors, easier than standard pigtails. Exclusive patented feature, circuit label on back allows permanent circuit identification. (2)
  • Ultrasonically Welded Together for Unrivaled Strength (9)
  • Use when mounting wall-type telephone, quick connect posts ensure easy wall-mount phone installation; Conductor: 4; Poles: 6; 50 UIN of gold plating contact; Package: Bulk Pack (2)
  • UV Resistant Lamp Holders will not Fade or Discolor (2)
  • Various Types of Pulling, Support and Strain Relief Grips (3)
  • VersaMate® metallic pin & sleeve plugs, receptacles, and in-line connectors are designed for heavy duty industrial use. These devices supply power to both fixed and portable electrical equipment including pumps, generators, welders, vacuums, blowers and similar apparatus. Suitable for indoor and outodoor use, as well as applications that include wet, cold, hosedown, hazardous and corrosive environments. Configurations are also available in reverse-service and polarized orientations. (5)
  • VersaMate® metallic pin & sleeve plugs, receptacles, and in-line connectors are designed for heavy duty industrial use. These devices supply power to both fixed and portable electrical equipment including pumps, generators, welders, vacuums, blowers and similar apparatus. Suitable for indoor and outodoor use, as well as applications that include wet, cold, hosedown, hazardous and corrosive environments. Configurations are also available in reverse-service and polarized orientations. (7)
  • Vibration Proof;Posi-Lok Insulated Throat;Grounding Screw (17)
  • Vibrationproof;Chemical Resistance;Water Tight;Dust Tight (6)
  • Visual trip indicator light (2)
  • Wallbox receptacles (2)
  • Watertight (5)
  • Water-Tight (3)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • Watertight, Grounding Style 1, NEMA 4 Enclosure, Reverse Interior (2)
  • Watertight, Grounding Style 1, NEMA 4X Enclosure (4)
  • Watertight, Grounding Style 2, NEMA 4X Enclosure (9)
  • Watertight, Grounding Style 2, NEMA 4X Enclosure, Cable Range 0.390 to 1.375 in (2)
  • Watertight, Grounding Style 2, NEMA 4X Enclosure, Cable Range 0.875 to 1.906 in (2)
  • Watertight, Grounding Style 2, NEMA 4X Enclosure, Reversed Interior (2)
  • Weather and Tamper Resistant, AUTOGUARD Self test Technology, Closed Loop Active Detection (3)
  • Wiring Type Back and Side Wire (25)
  • Wiring Type Back Wire (3)
  • Wiring Type Side Wire (11)
  • Wiring Type Side Wire;Tri-Combo Head Mounting and Terminal Screws Ease Installation (10)
  • With Cover (3)
  • With Standard Size Wallplate (2)
  • With Zinc Plated Heavy Gauge Steel Mounting Strap (2)
  • Show More...

• Package Quantity

  

  • 1 BX;48 CA (2)
  • 1 CA;80 PK (2)
  • 1 ct (101)
  • 1 CT;10 PK (166)
  • 1 CT;100 PK (16)
  • 1 CT;12 PK (7)
  • 1 CT;15 PK (3)
  • 1 CT;150 PK (2)
  • 1 CT;156 PK (2)
  • 1 CT;2 Pk (7)
  • 1 CT;20 PK (4)
  • 1 CT;22 PK (3)
  • 1 CT;25 PK (32)
  • 1 CT;26 PK (6)
  • 1 CT;30 PK (3)
  • 1 CT;5 PK (21)
  • 1 CT;50 Pk (26)
  • 1 CT;6 Pk (6)
  • 1 PK (13)
  • 10 CT (15)
  • 10 CT;100 PK (65)
  • 10 CT;1000 PK (3)
  • 10 CT;200 PK (21)
  • 10 CT;50 PK (34)
  • 10 CT;60 PK (3)
  • 10 PK (33)
  • 10 PK;1 CT (13)
  • 10 PK;2 CT (10)
  • 10 PK;50 PK (2)
  • 10/100 PK (3)
  • 100 CT (6)
  • 100 CT;600 PK (3)
  • 100 JR (3)
  • 100 PK (15)
  • 100 PK;1 CT (4)
  • 100 PK;10 CT (5)
  • 100 PK;25 CT (4)
  • 1000 PK;100 CT (4)
  • 12 CT;120 PK (4)
  • 15 PK (2)
  • 2 CT (5)
  • 2 CT;10 PK (3)
  • 2 PK (14)
  • 2 PK;10 PK (2)
  • 2/10 PK (4)
  • 20 CT;1 PK (2)
  • 20 CT;100 PK (3)
  • 20 CT;200 PK (2)
  • 20 PK (3)
  • 20 PK;1 CT (3)
  • 25 (2)
  • 25 BG (2)
  • 25 CT (28)
  • 25 CT;1 PK (3)
  • 25 CT;100 PK (15)
  • 25 CT;150 PK (2)
  • 25 CT;250 PK (20)
  • 25 CT;50 PK (6)
  • 25 PK (28)
  • 25 PK (Inner);100 PK (Outer) (2)
  • 25 PK;1 CT (12)
  • 25 PK;100 PK (4)
  • 25 PK;125 CT (2)
  • 250 PK (4)
  • 250 PK;25 CT (9)
  • 250 PK;50 CT (2)
  • 5 CT (12)
  • 5 CT;1 PK (4)
  • 5 CT;10 PK (3)
  • 5 CT;25 PK (11)
  • 5 CT;50 PK (3)
  • 5 PK (15)
  • 5 PK (Inner);25 PK (Outer) (2)
  • 5 PK;25 PK (3)
  • 5/25 PK (2)
  • 5/50 PK (2)
  • 50 CT (7)
  • 50 CT;200 PK (9)
  • 50 CT;500 PK (9)
  • 50 PK (9)
  • 50 PK;1 CT (5)
  • 50 PK;10 CT (2)
  • 500 PK (3)
  • 500 PK;50 CT (5)
  • 6 CT (4)
  • 6 CT;60 PK (3)
  • 6 PK (6)
  • 6 PK;1 CT (3)
  • Show More...

• Application

  

  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (2)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (3)
  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (10)
  • Arc Flash Safety;Controls and Drives;Power Distribution (15)
  • C&I, Water, Communications, Electric Utility (2)
  • Cable Installation (3)
  • Commercial (139)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (116)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherGeneration - Renewable Energy - SolarGeneration - Conventional Energy - Coal and Fossil FuelGeneration - Conventional Energy - Gas FiredGeneration - Conventional Energy - NuclearDatacenters - Datacenters - OtherWater and Wastewater Systems - Water and Wastewater Systems - Other (8)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherResidential Bldgs & Facilities - Residential Bldgs & Facilities - Other (2)
  • Commercial Grade (3)
  • Commercial Hospital Grade (5)
  • Commercial Specification Grade (6)
  • Commercial/Residential (7)
  • Commercial;Heavy Duty (2)
  • Commercial;Indoor (14)
  • Commercial;Industrial (5)
  • Commercial;Industrial;Residential;Agricultural Lighting (2)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (14)
  • Commercial;Industrial;Wet Location (12)
  • Commercial;Non-Hazardous Location (8)
  • Commercial;Nuclear;Pharmaceutical Industry Chemical;Petrochemical (3)
  • Commercial;Residential (6)
  • Commercial;Residential;Indoor;Outdoor (4)
  • Commercial;Video, Data and Telephony Applications (3)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (4)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • Dust Tight, Hazardous Location, Indoor, Electrical Enclosure, Machine Tool, Potable Power Tool (2)
  • Electrical (24)
  • Extra Hard Use (10)
  • For Aluminum And Copper Conductors (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (11)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For Connecting To Type A Flexible Nonmetallic Conduit (5)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For Copper to Copper Connections;For Grounding Of Steel Structures or Transformers Using One or Two Cables;For Tapping One or Two Cables From Bus Bar. (2)
  • For Flexible Type Neoprene, Hypalon And PVC Jacketed Power Or Control Cord And Cable (9)
  • For Liquidtight Flexible Metal Conduit (11)
  • For RJ11C, RJ13C, RJ1DC Connector (2)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (9)
  • For Threaded Couplings And Cable Conductors As Contacts For CATV And Other UHF Applications (4)
  • For Use To Secure And Terminate Steel EMT To Knockouts And Concrete Tight Box (3)
  • For use with EMT conduit (9)
  • For use with SNA terminal blocks (5)
  • For Used To Ground And Secure Nonmetallic Sheathed And Service Entrance Cable to Boxes And Enclosures (2)
  • Grounding Wire (5)
  • Hazardous Location (20)
  • Hazardous Location;Wet Location (28)
  • Hazardous Locations (3)
  • Hazardous Locations;Ordinary Location;Wet/Dry Locations (2)
  • Heavy Duty (6)
  • Heavy Duty Industrial (14)
  • High Ampacity Connections (6)
  • Hospital (2)
  • Hospital grade (2)
  • Houses Runs of Control and Power Cable;Cable and Wire Junction, Distribution and Termination (2)
  • Houses Runs of Control and Power Cable;Cable and Wire Junction;Distribution and Termination (9)
  • Hubbell-Pro Heavy Duty (3)
  • Hubbell-Pro Heavy Duty Hospital Grade (6)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Assemblies;Wire Hook-Up;Indoor/Outdoor (12)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Transformer Connections;Outdoor Lighting (8)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors and Controls;Printing Equipment;Pumps;Refrigeration Equipment;Transformer Connections;Outdoor Lighting (3)
  • Ind Facilities & Factories - Facility - Other (9)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (59)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (5)
  • Indoor (8)
  • Indoor or Outdoor;Wet;Cold;Hosedown;Hazardous or Corrosive Areas;Pulp & Paper Mills;Electrical Power Plants;Petrochemical Plants;Wastewater Treatment;Marine;Docks;Ports;Construction Sites;Breweries;Reneries;Chemical Plants;Grain Facilities;Textile Manufacturing;Food Processing Facilities (3)
  • Indoor Use in Wiring of Enclosures;Power Boxes;Machine Tools and Power Centers (3)
  • Indoor;Outdoor (2)
  • Industrial (108)
  • Industrial Spec Grade (4)
  • Industrial/Commercial (7)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Join Two Lengths of Threaded Conduit;Couples Conduit when Conduit Cannot be Turned (6)
  • lighting (10)
  • Mod Plug Terminating of UTP 24 AWG Cat 5 or 5E (3)
  • Modular Tool Storage (9)
  • New work and Retrofit (3)
  • New Work in Poured Concrete;Maintenance, Repairs and Alterations;Connections at Panels and Boxes;New Altered or Damaged Stub-Ups;Applicable Locations Where Field Threading is Impractical or Undesirable (13)
  • NM Cable (2)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • NSI (4)
  • Other (2)
  • Outdoor (10)
  • Pharmaceutical;Chemical;Food Processing;Pulp/Paper and Nuclear Industries (17)
  • Physical Protection of Conductors and Long Service Life of the Installation (10)
  • Power Distribution (12)
  • Power on Counter Top (6)
  • Pressure-Type Wire Connectors Including Lugs;Taps;Service Entrances and Split Bolts (4)
  • Provide a Liquidtight and Strain Relief Termination for Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable;For use in Wet or Dry Locations Sealing Electrical Connections Against Dust and Dirt;Oil;Water or Other Atmosphere Containing Moisture (8)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide a Means for Passing a Cord Cable Into an Enclosure;Form a Watertight seal for Cord;Provide Pull-Out Protection for Cord;Ensuring a secure Connection (12)
  • Provides Threaded Coupling Between Lengths of Rigid Conduit and IMC Conduit Elbows, Where Neither Can Be Rotated (2)
  • Residential (26)
  • Residential and commercial wiring jobs (6)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - Other (72)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (2)
  • Residential Bldgs & Facilities - Residential Bldgs/Facilities - AftermarketResidential Bldgs & Facilities - Residential Bldgs & Facilities - Other (2)
  • Residential Home;Apartment Buildings;Extended Stay Hotels;Assisted Living Facilities;Retirement Communities (3)
  • Residential/Commercial (5)
  • Residential;Commercial (83)
  • Residential;Commercial;Industrial (2)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (6)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (3)
  • Splicing Wire (4)
  • Stationary Mach Equip In Factory - Other Stationary Machinery and Equipment - In Factory (6)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (7)
  • Straight Male- Form 1 (3)
  • Straight Male- Form 2 (4)
  • Straight Male- Form 3 (3)
  • Straight Male- Form 4 (4)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • STRGHT BLADE PLG&CONNEC (2)
  • Suitable for A50, A63, A75, AE50, AE63, AE75 (2)
  • Suitable for indoor or outdoor use. Applications include the wet, cold, hosedown, hazardous or corrosive areas in such industrial applications as:Pulp & Paper Mills, Electrical Power Plants, Petrochemical Plants, Wastewater Treatment, Marine, Docks, Ports, Construction Sites, Breweries, Re?neries, Chemical Plants, Grain Facilities , Textile Manufacturing, Food Processing Facilities (5)
  • Suitable for indoor or outdoor use. Applications include the wet, cold, hosedown, hazardous or corrosive areas in such industrial applications as:Pulp & Paper Mills, Electrical Power Plants, Petrochemical Plants, Wastewater Treatment, Marine, Docks, Ports, Construction Sites, Breweries, Re?neries, Chemical Plants, Grain Facilities , Textile Manufacturing, Food Processing Facilities (7)
  • Suitable for Use In Hazardous Locations Where General Purpose Equipment is Specifically Permitted by NEC 501-4(B) (9)
  • SURGE SUPPRESSOR (3)
  • Terminate, Splice, Tap Power Connectors (55)
  • Terminate-Splice-Tap (3)
  • Termination of an F Type Connection;Compression Style RG6 (3)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • To Connect Conduit to a Conduit Fitting, Junction Box or Device Enclosure (8)
  • To Connect Conduit to Conduit or to Provide a Means for Future Modification of the Conduit System (4)
  • To Connect Flexible Cord to a Box or Enclosure and Provide Adequate Strain Relief (3)
  • To Connect Threaded Metal Conduit to a Threadless Opening in a Box or Enclosure (9)
  • To ground and secure EMT Raceways to boxes and enclosures (10)
  • To positively bond conduit to box or enclosure (2)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (3)
  • Unknown - Unknown: Undefined (2)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electric Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing require (6)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (3)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (11)
  • Used to connect flexible metal conduit to box or enclosure. (6)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to join EMT to box or enclosure. Concrete tight. (18)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (3)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (6)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. (5)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to Secure EMT to Box or Enclosure (8)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (6)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (21)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (10)
  • Utility/Ground Grid (3)
  • Wet Location (16)
  • Wet Location;Hazardous (18)
  • Wire Termination (59)
  • Wiring Enclosure, Pendant Station, Hand Tool, Construction, Processing and Material Handling Equipment, Pump, Motor and Machine Tool, Hazardous/Wet Location (2)
  • Wiring Enclosure;Pendant Station;Hand Tool;Construction;Processing and Material Handling Equipment;Pump;Motor and Machine Tool;Hazardous/Wet Location (4)
  • Show More...

• Weight

  

  • 0.0002 lb/EA (2)
  • 0.0005 lb/EA (3)
  • 0.0006 lb/EA (2)
  • 0.0007 lb/EA (2)
  • 0.01 lb (7)
  • 0.01 lb/EA (2)
  • 0.02 lb/EA (8)
  • 0.03 lb (2)
  • 0.03 lb/EA (6)
  • 0.04 lb/EA (3)
  • 0.05 lb/EA (9)
  • 0.0500 lb (2)
  • 0.06 lb/EA (4)
  • 0.062 lb/EA (2)
  • 0.068 lb/EA (2)
  • 0.07 lb/EA (4)
  • 0.076 lb/EA (2)
  • 0.08 lb (4)
  • 0.08 lb/EA (7)
  • 0.0839 lb/EA (2)
  • 0.09 lb (3)
  • 0.09 lb/EA (7)
  • 0.1 lb (3)
  • 0.1 lb/EA (16)
  • 0.1000 lb (3)
  • 0.11 lb (3)
  • 0.11 lb/EA (5)
  • 0.12 lb (2)
  • 0.12 lb/EA (6)
  • 0.1200 lb (3)
  • 0.126 lb/EA (2)
  • 0.13 lb/EA (4)
  • 0.1300 lb (17)
  • 0.138 lb/EA (2)
  • 0.14 lb/EA (5)
  • 0.1400 lb (12)
  • 0.15 (2)
  • 0.15 lb (16)
  • 0.15 lb/EA (9)
  • 0.1500 lb (7)
  • 0.16 lb (6)
  • 0.16 lb/EA (3)
  • 0.1600 lb (5)
  • 0.17 lb (7)
  • 0.17 lb/EA (4)
  • 0.1700 lb (8)
  • 0.18 lb (4)
  • 0.18 lb/EA (2)
  • 0.1800 lb (2)
  • 0.19 lb (7)
  • 0.19 lb/EA (3)
  • 0.1900 lb (6)
  • 0.193 lb/EA (2)
  • 0.2 lb (6)
  • 0.2 lb/EA (4)
  • 0.2000 lb (25)
  • 0.21 lb/EA (4)
  • 0.2100 lb (7)
  • 0.22 lb/EA (6)
  • 0.2200 lb (7)
  • 0.23 lb/EA (2)
  • 0.24 lb (2)
  • 0.24 lb/EA (2)
  • 0.2400 lb (6)
  • 0.25 lb/EA (3)
  • 0.2500 lb (12)
  • 0.26 lb (3)
  • 0.27 lb (2)
  • 0.27 lb/EA (2)
  • 0.2700 lb (2)
  • 0.2800 lb (30)
  • 0.29 lb (2)
  • 0.29 lb/EA (2)
  • 0.3 lb/EA (5)
  • 0.30 lb/EA (2)
  • 0.3000 lb (2)
  • 0.34 lb/EA (4)
  • 0.35 lb (2)
  • 0.35 lb/EA (3)
  • 0.3500 lb (4)
  • 0.36 lb/EA (4)
  • 0.37 lb (3)
  • 0.3700 lb (7)
  • 0.38 lb (5)
  • 0.38 lb/EA (3)
  • 0.39 lb/EA (3)
  • 0.3900 lb (2)
  • 0.4 lb (3)
  • 0.4 lb/EA (2)
  • 0.4000 lb (3)
  • 0.41 lb (2)
  • 0.4100 lb (2)
  • 0.44 lb (2)
  • 0.45 lb (2)
  • 0.5 lb/EA (3)
  • 0.52 lb/EA (4)
  • 0.53 lb/EA (3)
  • 0.533 lb/EA (2)
  • 0.55 lb (2)
  • 0.55 lb/EA (3)
  • 0.59 lb (2)
  • 0.6 lb (2)
  • 0.66 lb/EA (2)
  • 0.8 lb/EA (2)
  • 0.87 lb/EA (3)
  • 1 lb (2)
  • 1 lb/EA (7)
  • 1.18 lb (2)
  • 1.308 lb/EA (2)
  • 10 lb (3)
  • 10 lb/100 (6)
  • 12 lb (2)
  • 12 lb/EA (2)
  • 12.5 lb/100 (2)
  • 13 lb/100 (2)
  • 14 lb (5)
  • 14 lb/100 (8)
  • 15 lb (3)
  • 15.00 lb/100;6.80 kg/100 (2)
  • 18 lb/100 (2)
  • 19 lb/100 (3)
  • 2 lb/EA (2)
  • 2.0 lb (2)
  • 2.45 lb/EA (3)
  • 2.7 lb (2)
  • 2.77 lb (2)
  • 20 lb/100 (3)
  • 21 lb (2)
  • 23 lb/100 (2)
  • 23.5 lb/100 (2)
  • 24 g (2)
  • 25 lb/100 (2)
  • 28.7 lb/100 (2)
  • 3 lb (2)
  • 3.0 lb (3)
  • 3.3 lb/EA (2)
  • 30 g (2)
  • 37.5 lb/100 (3)
  • 39.7 lb/100 (2)
  • 4 lb (2)
  • 5 lb (4)
  • 50 lb/100 (2)
  • 6.0 lb (4)
  • 60 lb/100 (2)
  • 7 lb (3)
  • 79 g (4)
  • 8 lb (4)
  • 8 lb/100 (2)
  • 90 g (4)
  • Show More...

• Wall Plate Included

  

  • 0 IN (4)
  • NO (150)
  • YES (41)
  • Show More...

• Amperage

  

  • 15.0 (91)
  • 20.0 (109)
  • 30.0 (16)
  • 50.0 (10)
  • Show More...

• Poles

  

  • 1 (45)
  • 2 (209)
  • 2 Pole/ 3 Wire (3)
  • 2-Pole (51)
  • 3 (29)
  • 3 in (3)
  • 3-Pole (13)
  • 3-way (20)
  • 4 (22)
  • Single-pole (12)
  • Two-pole (20)
  • Show More...

• Shape

  

  • C (11)
  • Rectangular (18)
  • Straight (86)
  • Show More...

• Category Description

  

  • ALL PLASTIBOND FITTINGS (7)
  • All Recessed Cans & Trims (11)
  • BITS, BLADES, AND HOLE SAWS (2)
  • Commercial GFCI devices (8)
  • Commercial receptacles (199)
  • Commercial switches (34)
  • Comp & Mech Lugs and Butt Splices (100)
  • CORD CONNECTORS & CORD GRIPS (176)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (12)
  • Datacom Wiring Devices and Accessories (35)
  • DIECAST EMT FITTINGS (27)
  • DP CONTACTORS (2)
  • EMT ELBOWS (8)
  • FASTENERS (2)
  • FLEX & MC FITTINGS (53)
  • FLOOR BOXES (4)
  • Fluorescent Fixtures & Accessories (4)
  • FORM 5 CONDULETS, COVERS, & GASKETS (13)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (8)
  • Fuses & Fuse Accessories (27)
  • GENERAL PURPOSE RELAYS (8)
  • HAND TOOLS (6)
  • HAZARDOUS LOCATION FITTINGS (16)
  • IDEC RELAYS.IDC (11)
  • IEC/FREEDOM CONTACTOR (2)
  • Industrial cord connectors (65)
  • Industrial receptacles (89)
  • LED DECORATIVE C, CA, F, G SHAPE LAMPS (3)
  • Led Lighting (2)
  • LOADCENTER ACCESSORIES (3)
  • LOADCENTERS & COVERS (14)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (14)
  • METALLIC FITTINGS (86)
  • Miscellaneous residential devices (5)
  • NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES (29)
  • NON-METALLIC FITTINGS (43)
  • NON-METALLIC SEALTITE AND FITTINGS (8)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (7)
  • PHASE FAILURE RELAYS (2)
  • Pin & Sleeve Devices (73)
  • Residential cord connectors (16)
  • Residential GFCI devices (76)
  • Residential plates (9)
  • Residential receptacles (185)
  • Residential Switches (23)
  • RIGID NIPPLES (12)
  • ROMEX CONNECTORS (8)
  • SENSORS (7)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (11)
  • SLB'S & JAKE ELL'S (2)
  • SPLICE KITS (29)
  • SPLIT BOLTS (44)
  • STEEL BOXES & COVERS (2)
  • STEEL EMT FITTINGS (125)
  • STEEL JUNCTION BOXES (15)
  • STEEL WIRE WAY JUNCTION BOXES (19)
  • T&B C TAP LUGS (23)
  • TERMINAL BLOCK ACESSORIES (2)
  • TERMINAL BLOCKS POWER DIST BLOCKS (8)
  • TERMINALS (8)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (3)
  • TOOL BAG/POUCHES (9)
  • TOOL BAG/POUCHES ACCESSORIES (Belts, Pads, etc.) (2)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (75)
  • WEATHERPROOF BOXES & COVERS (4)
  • WIRE DUCT AND COVERS (14)
  • WIRE LUBE, MARKERS, & TIES (4)
  • WIRE NUTS (7)
  • Show More...

• Voltage

  

  • 120 VAC, 277 VAC (6)
  • 120.0 V, 125.0 V (4)
  • 125.0 V (161)
  • 125.0 V, 120.0 V (6)
  • 125/250 V (11)
  • 250.0 V (27)
  • 480.0 V (5)
  • 600.0 V (6)
  • Show More...

• Manufacturer Status

  

  • Inactive (36)
  • Non-Stock (17)
  • Show More...

• Operating Temperature

  

  • -35°C to +66°C (37)
  • -40 C To 90 C (2)
  • -40°-60°C (61)
  • -40°-75°C (5)
  • Show More...

• Housing Material

  

  • Aluminum (38)
  • Copper (12)
  • Show More...

• Mounting

  

  • 1/2 Mounting Hole (7)
  • 1/2 Mounting Holes (9)
  • 1/4 Mounting Hole (5)
  • 1/4 Mounting Holes (4)
  • 3/8 Mounting Hole (11)
  • 5/16 Mounting Hole (4)
  • 5/8 Mounting Hole (2)
  • BOX (5)
  • Clamp (3)
  • Connector (8)
  • Consult the Factory for Mounting Recommendations (3)
  • Cord (13)
  • Device, Wall (3)
  • FLUSH (8)
  • Fractionnable model, composed of captive screws on a jumper bar, with IP20 protection touchproof. This accessory can be used for connecting consecutive blocks only. (5)
  • in Kitchen Countertop (6)
  • Locknut or Tapped Opening (35)
  • None (11)
  • Push In (2)
  • Receptacle (11)
  • Screw Mount (56)
  • WALL (124)
  • WALLBOX (3)
  • Show More...

• Number Of Conductors

  

  • 1 (44)
  • 2 (24)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 3 (11)
  • 3-Wire Grounding (3)
  • 4 (4)
  • 6 (3)
  • 8 (2)
  • Single (35)
  • Show More...

• Trade Size

  

  • 0.75 (2)
  • 1 (24)
  • 1 in (32)
  • 1 INCH (4)
  • 1/2 (3)
  • 1/2 in (66)
  • 1/2 INCH (7)
  • 1-1/2 (16)
  • 1-1/2 in (23)
  • 1-1/2 INCH (5)
  • 1-1/4 (12)
  • 1-1/4 in (28)
  • 1-1/4 INCH (6)
  • 2 (9)
  • 2 in (36)
  • 2 INCH (7)
  • 2.5 (2)
  • 2-1/2 (5)
  • 2-1/2 IN (13)
  • 2-1/2 INCH (3)
  • 3 (11)
  • 3 in (14)
  • 3 INCH (3)
  • 3/4 (4)
  • 3/4 in (73)
  • 3/4 INCH (5)
  • 3/8 (4)
  • 3/8 in (16)
  • 3-1/2 (3)
  • 3-1/2 in (3)
  • 3-1/2 INCH (4)
  • 4 (12)
  • 4 in (9)
  • 4 INCH (3)
  • Show More...

• Wattage

  

  • 14,400 (2)
  • 1875 (4)
  • 2500 (34)
  • 5,000 (3)
  • 5.5 (2)
  • 5540 (4)
  • 7,500 (3)
  • 9,600 (2)
  • Electrical power is expressed in Amps and Volts. (42)
  • N/A (7)
  • Show More...

• Type

  

  • 6" H7 Housing (6)
  • 6" Slope Ceiling Housing (2)
  • Accessory (11)
  • AFCI receptacle (5)
  • AFGF receptacle (7)
  • Aluminum Lay-In Lug (2)
  • Aluminum Pin Adapters (2)
  • Anti-Oxidant Compound (4)
  • Auto grip (6)
  • BACK BOX (5)
  • Basic hub (14)
  • Below Ground Boxes (2)
  • Bolted Lugs & Terminals (2)
  • BUSHING (16)
  • Butt Splice (2)
  • Butted (3)
  • Cable gland (28)
  • Combination USB charger with duplex receptacle (17)
  • Combination USB charger with single receptacle (4)
  • COMMERCIAL (5)
  • Commercial grade combination switch (4)
  • Commercial grade toggle switch (19)
  • Commercial hub (10)
  • Commercial Lay-in Galvanized Flat-Cover Type 1 Wireway;Straight Section (6)
  • Commercial specification grade (61)
  • COMPRESSION (6)
  • Compression Connector (24)
  • Compression coupling (6)
  • Compression Tap (5)
  • Conduit outlet body (10)
  • CONNECTOR (193)
  • Connector Body (5)
  • Connector cable (8)
  • Connector, Straight Blade (3)
  • Connectors (5)
  • Connectors-Straight (26)
  • Convertible loadcenter (4)
  • Copper C Taps (3)
  • Copper Connectors (3)
  • Cord grip (15)
  • Cord Grips (6)
  • COUPLING (6)
  • Crimp Sleeve Wire Connectors (3)
  • C-Taps (5)
  • DECORATOR (3)
  • Double Sided Entry (5)
  • Double Sided Entry With Mounting Holes (4)
  • Dual-Rated Mechanical Connector (15)
  • DUPLEX (3)
  • Duplex, GFCI, Straight Blade (3)
  • ELBOW (2)
  • EMT Conduit Fittings (19)
  • EMT Conduit Straight Compression Connector (8)
  • EMT Conduit Straight Set Screw Connector (2)
  • Extra heavy-duty hospital grade (6)
  • Extra heavy-duty industrial specification grade (7)
  • FITTING (6)
  • Flex (3)
  • Floor Box (2)
  • Flush Wall Plate (2)
  • F-Type (6)
  • GAR-BU (2)
  • Gel Tap Splice Kits With Connector (2)
  • GFCI receptacle (30)
  • Ground Hub (8)
  • Ground Rod Clamps Standard Duty (2)
  • Heavy Duty Ground Connector For Parrallel Copper Cables (2)
  • Heavy-duty hospital grade (10)
  • Heavy-duty industrial specification grade (24)
  • H-Type Compression Tap Connector (12)
  • Hub Connector (10)
  • Industrial Panels and Panel Accessories;Painted Steel (14)
  • Insulated Hub (4)
  • Insulation Displacement (10)
  • Insulation Piercing Connectors (3)
  • Interlocked receptacle with switch (2)
  • Isolated Ground (3)
  • Lamp Holders (2)
  • Liquidtight connector (14)
  • Liquidtight Fittings (2)
  • Locking Fork Terminal (3)
  • Locking Receptacle (16)
  • Long Barrel - One Hole (26)
  • Long Barrel - Two Hole (14)
  • Long Barrel, Tin Plated (22)
  • Mechanical Grounding (13)
  • MODbox™ Rail Attachment (2)
  • MODbox™ Toolbox (6)
  • Modular decorator receptacle (4)
  • Motor control renewal parts/accessories (3)
  • Outlet (133)
  • Overload relay (3)
  • Pin & Sleeve (12)
  • PLUG (24)
  • Plugs (2)
  • Pole (3)
  • Power device receptacle (22)
  • Power Only (6)
  • Push-In Connector (13)
  • Quick Connect Telephone Jack (2)
  • Raintight compression connector (9)
  • RECEPTACLE (30)
  • Receptacle assembly (4)
  • RECEPTACLE COVER (9)
  • REDUCER (2)
  • Reducing Bushing (2)
  • Replacement Sleeves (3)
  • Residential (4)
  • Residential Grade (43)
  • Ring Tongue (2)
  • Round Solid, RJ-45 (3)
  • Secure Grip Wire Connectors (6)
  • Service Post Connectors (8)
  • SET SCREW (8)
  • Set screw connector, insulated, EMT (7)
  • Set screw type connector (10)
  • Short Barrel - One Hole (2)
  • SINGLE (3)
  • Single Ended (pigtail) (4)
  • Single Flush Receptacle (13)
  • Single Sided Entry (6)
  • Snap-on (3)
  • Spec Grade Surge Protective Receptacle, Audible Alarm with LED Indicator (3)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (5)
  • ST Series Straight Liquidtight Connector With Plain Throat (13)
  • STANDARD (8)
  • Standard Duplex (10)
  • STB Series Straight Liquidtight Connector With Insulated Throat (2)
  • Steel Cord Grips (10)
  • STNM Series Straight Liquidtight Connector (6)
  • STRAIGHT (25)
  • Straight Blade Connector (5)
  • Straight Blade Plug (2)
  • Straight Blade Receptacle (15)
  • Straight Ceiling Wire (2)
  • Straight Cord Connector (7)
  • Straight Liquidtight Non-Insulated Connector (3)
  • Straight Liquidtight Strain Relief Connector (17)
  • STRAIGHT MALE (33)
  • Straight Male Thread (2)
  • Straight reducer (5)
  • Straight Section (8)
  • Strain Relief Cord Connectors-Straight (9)
  • Strain relief dust tight grip (3)
  • Submersible Pedestal Connectors (3)
  • SurgeBloc protection receptacle (2)
  • SWITCH (7)
  • Tamper-Resistant (6)
  • Tamper-resistant receptacle (2)
  • Tamper-Resistant, Weather Resistant (10)
  • Terminal blocks (5)
  • Three Piece Coupling (2)
  • Three-piece conduit coupling (6)
  • TOGGLE (4)
  • Turnlock Single Receptacle (6)
  • Type SR Gold Seal Strain Relief Straight Connector (9)
  • Ultra grip (11)
  • Union (14)
  • Wallplate with connector (3)
  • Watertight (3)
  • Watertight Connector Body (2)
  • Watertight Plug (4)
  • Wide Range Tap Connectors (6)
  • Wireway (4)
  • Wiring trough (8)
  • YC-C Series (2)
  • Show More...

• Temperature Rating

  

  • 105 C (2)
  • 105?°C (24)
  • 194 (2)
  • -25 To 40 Deg C (28)
  • 32 to 104 (3)
  • -40 to 140 F (2)
  • 90 C (13)
  • Operating Temperature: -20°C to +55°C (-4°F to 131°F), Storage Temperature: -40°C to +85°C (-40°F to 185°F) (4)
  • Show More...

• Connector Type

  

  • Compression (39)
  • E-Z Lock® (2)
  • FMC (7)
  • Liquidtight (5)
  • PUSH-EMT® (2)
  • RJ45 (2)
  • Screw-In (3)
  • SET SCREW (32)
  • Snap (2)
  • Squeeze (22)
  • Squeeze, Insulated (3)
  • Steel Raintight/Concrete-Tight Insulated (6)
  • STRAIGHT (12)
  • STRAIGHT MALE (6)
  • Straight Nonmetallic (9)
  • Straight, Insulated (3)
  • Threaded Coupling (2)
  • Two-Screw, Strap Type (10)
  • Show More...

• Stud Size

  

  • 1/2 (17)
  • 1/4 (9)
  • 3/8 (12)
  • 5/16 (4)
  • 5/8 (2)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 2 Group B C D, Class II Div 1 Group E F G, Class II Div 2 Group F G, Class III (11)
  • Class I Div 1 and 2 Group A B (2)
  • Class I Div 1 and 2 Group A B C D;Class II Div 1 Group E F G;Class II Div 2 Group F G;Class III (2)
  • Class I Div 2, Class II Div 1 and 2, Class III Div 1 and 2 (10)
  • Class I Div 2;Class II Div 1 and 2;Class III Div 1 and 2;Class I Zone 1 Aex E II;Class I Zone 1 Ex E II;NEMA 2;NEMA 3;NEMA 3R;NEMA 4;NEMA 4X;NEMA 12 (3)
  • Class I Div 2;Class II Div 1 and 2;Class III;NEMA 3R (8)
  • Class I Div 2;NEMA 3R (6)
  • Class I Div 2;NEMA 3R;NEMA 4;NEMA 4X (22)
  • Nema 1 (11)
  • NEMA 2/3/3R/4/4X/12 (17)
  • NEMA 2/3/3R/4/4X/5/12/13;NEMA FB-1 (4)
  • NEMA 2;NEMA 3;NEMA 3R;NEMA 4;NEMA 4X;NEMA 12 (2)
  • Nema 4 (12)
  • NEMA 4/4X/12/13 (18)
  • NEMA 6 and 4X (4)
  • Type 4X (3)
  • Show More...

• Thread Size

  

  • 0.63 in (4)
  • 1 in (21)
  • 1 in NPT (4)
  • 1/2 in (36)
  • 1/2 in NPT (4)
  • 1/2 Inch Threaded (2)
  • 1-1/2 in (3)
  • 1-1/2 in NPT (3)
  • 1-1/4 in (2)
  • 1-1/4 in NPT (4)
  • 2 in (3)
  • 2 in NPT (4)
  • 2-1/2 in NPT (2)
  • 3 in NPT (3)
  • 3/4 in (29)
  • 3/4 in NPT (5)
  • 3/4 Inch Threaded (2)
  • Show More...

• Size

  

  • 0.305m (4)
  • 0.5 (2)
  • 0.75 (2)
  • 1 (38)
  • 1 1/2 (7)
  • 1 1/4 (9)
  • 1 in (19)
  • 1 INCH (8)
  • 1" NPT (2)
  • 1.29 in x 0.55 in x 1.1 in (3)
  • 1.32 in x 0.83 in x 3.28 in (7)
  • 1.32 in x 1.14 in x 3.28 in (3)
  • 1.83 in (2)
  • 1.88 in x 1.88 in x 2.45 in (2)
  • 1/2 (40)
  • 1/2 in (32)
  • 1/2 INCH (10)
  • 1/2" NPT (5)
  • 1-1/2 (18)
  • 1-1/2 in (9)
  • 1-1/2 INCH (3)
  • 1-1/4 (14)
  • 1-1/4 in (13)
  • 1-1/4 INCH (4)
  • 2 (27)
  • 2 1/2 (4)
  • 2 in (10)
  • 2 INCH (4)
  • 2.3 in (2)
  • 2.64" (3)
  • 2.8 in (10)
  • 2-1/2 (7)
  • 2-1/2 in (6)
  • 2-1/2 Inch (3)
  • 3 (13)
  • 3 in (8)
  • 3 INCH (3)
  • 3.25 in x 3.41 in x 3.89 in (4)
  • 3.25" (3)
  • 3.28 in x 1.33 in x 1.05 in (3)
  • 3.28 in x 1.57 in x 1.15 in (6)
  • 3.28 in x 1.7 in x 1.23 in (4)
  • 3.28 in x 1.7 in x 1.31 in (3)
  • 3.28 in x 1.70 in x 1.23 in (4)
  • 3.28 in x 1.70 in x 1.31 in (2)
  • 3.28 in x 2.75 in x 2.44 in (2)
  • 3.3 in (55)
  • 3.3" (5)
  • 3.8 in (9)
  • 3/4 (41)
  • 3/4 in (31)
  • 3/4 INCH (9)
  • 3/4" NPT (4)
  • 3/8 (16)
  • 3-1/2 (4)
  • 3-3/8 In Diameter X 2-7/8 In Length (7)
  • 4 (13)
  • 4 in (7)
  • 4 INCH (3)
  • 4.12 in x 1.75 in x 1.48 in (4)
  • 4.18 in x 1.49 in x 1.83 in (4)
  • 4.2 in (21)
  • 4.20 in x 4.20 in x 6.48 in;Standard Sized (6)
  • 4.69 x 2.94;119 x 75 (3)
  • 4.75" (2)
  • 4-1/2 In Diameter X 4-1/4 In Length (4)
  • 4-1/4 In Diameter X 5-1/4 In Length (7)
  • 5.37 in x 4.25 in x 4.75 in (3)
  • 5.7 in (5)
  • 58x92x111mm (2)
  • 6 In (2)
  • 6.68 in x 3 in x 3 in (4)
  • 7.5 (3)
  • CH - 3/4 in - plug on neutral (3)
  • F2 (12)
  • F3 (7)
  • F4 (2)
  • J (2)
  • L(1.040) x W(1.040) x H(1.827) (2)
  • L(1.280) x W(1.280) x H(2.205) (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • Length 1-13/16 inch (3)
  • Standard (3)
  • Standard Sized (6)
  • Standard Sized Product (11)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Show More...

• Switch Type

  

  • 120 VAC 15 AMPERE SINGLE POLE TOGGLE (3)
  • Toggle (11)
  • Show More...

• Throat Type

  

  • INSULATED (10)
  • Non-Insulated (4)
  • Show More...

• Knockouts

  

  • (1) 1/2" KO and (1) Wire Clamp (6)
  • FALSE (8)
  • Yes (7)
  • Show More...

• Configuration

  

  • C (11)
  • TT-30R (2)
  • Show More...

• Number Of Lamps

  

  • 1 (4)
  • N/A (9)
  • Show More...

• Hub Size

  

  • 1 in (8)
  • 1/2 in (10)
  • 1-1/2 in (6)
  • 1-1/4 in (6)
  • 2 in (7)
  • 2-1/2 in (3)
  • 3 in (4)
  • 3/4 in (11)
  • 3/8 in (2)
  • 4 in (4)
  • Show More...

• Wire Type

  

  • Al/Cu (2)
  • ALUMINUM/COPPER (4)
  • B,C,D,K,M,I (4)
  • Class A & B (8)
  • Class B & C (18)
  • CU Wire Only (2)
  • N/A (3)
  • Show More...

• Color Code

  

  • BLACK (5)
  • BLUE (6)
  • BROWN (12)
  • GRAY (3)
  • GREEN (3)
  • ORANGE (4)
  • Orchid (5)
  • RED (6)
  • WHITE (7)
  • YELLOW (4)
  • Show More...

• Cover Type

  

  • Hinged Cover (9)
  • Screw Cover (2)
  • Show More...

• Knockout Size

  

  • 1 in (5)
  • 1/2 in (8)
  • 1-1/2 in (3)
  • 1-1/4 in (4)
  • 2 in (4)
  • 3/4 in (5)
  • Show More...

• Construction

  

  • Clear Glass (3)
  • Concrete Tight (9)
  • Die-Cast (2)
  • Fabricated (6)
  • Rugged Die-Cast (4)
  • Show More...

• Used On

  

  • EMT CONDUIT (9)
  • Liquid Tight Conduit (2)
  • Liquidtight Conduit (5)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (2)
  • RIGID/EMT CONDUIT (4)
  • Show More...

• Minimum Qty

  

  • 10 (2)
  • 100 (10)
  • 25 (2)
  • 50 (4)
  • 500 (2)
  • Show More...

• Insulation Type

  

  • Insulated (7)
  • Non-Insulated (3)
  • Rubber (2)
  • Show More...

• Cable Entry

  

  • Kos in Bottom (6)
  • Not Standard (2)
  • Show More...

• Minimum Conductor Size

  

  • #12 AWG (2)
  • #14 AWG (7)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #4 AWG (Stranded) (2)
  • #6 AWG (2)
  • #6 AWG (Stranded) (8)
  • #8 AWG (3)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • 250 MCM (4)
  • Show More...

• Thickness

  

  • 0.1 (3)
  • 0.35 (2)
  • 0.82 in;20.8 mm (2)
  • 1 in (8)
  • Show More...

• Applicable Standard

  

  • ANSI C80.1, Federal Specification WW-C-563 (6)
  • ANSI C80.3, Fed Spec WW-C-563 (2)
  • ANSI C80.3, Federal Specification WW-C-563 (2)
  • ANSI C80.3, WW-C-563 (5)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (3)
  • # 2 AWG (STR) (6)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (3)
  • # 6 AWG (STR) (6)
  • # 8 AWG (STR) (3)
  • 1/0 AWG (STR) (4)
  • 2/0 AWG (STR) (3)
  • 3/0 AWG (STR) (3)
  • 4/0 AWG (STR) (2)
  • 500 MCM (STR) (4)
  • Show More...

• Standard Package

  

  • 1 PER CASE (12)
  • 10 (3)
  • 12 PER CASE (2)
  • 20 (2)
  • 20 PER CASE (3)
  • 25 PER CASE (6)
  • 250 PER CASE (4)
  • 30 (2)
  • 4 (2)
  • 40 (3)
  • 50 PER CASE (2)
  • 6 PER CASE (2)
  • Show More...

• Depth

  

  • 1.225 (4)
  • 1.5 (2)
  • 1.88 (3)
  • 4.00 In (2)
  • 4.2 (6)
  • Show More...

• Contact Rating

  

  • 15amp, 120/277vac (2)
  • 20 Amp, 120/277 VAC (4)
  • Per UL 20 (4)
  • Show More...

• Insulation Color

  

  • Black (4)
  • Blue (4)
  • Brown (3)
  • Green (2)
  • Purple (4)
  • Yellow (3)
  • Show More...

• Base Type

  

  • E12 (3)
  • Medium (2)
  • Petroleum (4)
  • Show More...

• Lamp Type

  

  • B11 (3)
  • Incandescent (2)
  • Incandescent (Not Included) (2)
  • LED (2)
  • N/A (5)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #2 AWG (Stranded) (4)
  • #4 AWG (2)
  • #6 AWG (2)
  • #8 AWG (2)
  • 1/0 AWG (Stranded) (3)
  • 2/0 AWG (3)
  • 2/0 AWG (Stranded) (4)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (3)
  • 350 kcmil (3)
  • 500 MCM (2)
  • 600 kcmil (2)
  • Show More...

• Overall Length

  

  • 0.80 in;20.3 mm (2)
  • 1 in;25.4 mm (3)
  • 1.913 in (2)
  • 1-1/2 in (2)
  • 1-15/32 in (4)
  • 14 mm (2)
  • 2 in (2)
  • 2.26 in;57.5 mm (2)
  • 2.677 in (2)
  • 24 in;610 mm (6)
  • 29.3 mm (4)
  • 3-3/16 in (2)
  • 35 mm (4)
  • 36 in;914 mm (2)
  • 48 in;1219 mm (2)
  • 6.1 mm (2)
  • Show More...

• Cable Type

  

  • CAT 5/CAT 5e (2)
  • CAT5e (3)
  • CAT6 (4)
  • Class A-B (2)
  • RG 6 to RG 6Q (2)
  • RG6 (2)
  • RG-6 Reg/Tri/Quad (3)
  • Various Types of Electrical Conductor/Cable (3)
  • Show More...

• Thread Length

  

  • 0.406 in (4)
  • 0.406 INCH (2)
  • 0.51 in (2)
  • 0.58 in (2)
  • 0.64 in (2)
  • 0.84 in (4)
  • 0.87 in (2)
  • 0.938 INCH (2)
  • 7/16 in (3)
  • 9/16 in (3)
  • Show More...

• Insulation Material

  

  • EPDM Rubber (2)
  • PVC (2)
  • Silicon Bronze (4)
  • Vinyl (2)
  • Show More...

• Die Index

  

  • 10 (3)
  • 11 (2)
  • 18 (2)
  • 20 (3)
  • 24 (3)
  • 9 (2)
  • 997 (2)
  • Show More...