Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • 225A FD Collar Kit_(3) Terminals and (2)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (10)
  • 3M™ Highland™ Nylon Fully Insulated Butted Seam Female Disco (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (4)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Ring Tongues (7)
  • 3M™ Highland™ Wire Connectors (3)
  • 3M™ Performance Plus™ Wire Connectors (8)
  • 3M™ Scotchcast™ Multi-Mold Resin Splice Kits 85 Series (2)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Idc Connector 562 (2)
  • 3M™ Scotchlok™ Idc Connector 567 (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 4 Wire Ground TB 1.5 MM2 (2)
  • 6 X 1-1/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • 6 X 1-5/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • Aluminum Multi Tap Insulated Conn (1)
  • AMT Connector (2)
  • Automatic Tension Splice Connector (2)
  • Block Fork (1)
  • Butt Connector (1)
  • Butt Splice (7)
  • Butt Splice Connector (13)
  • Cable Connector (2)
  • Cable Tie 50LB 15IN BLK Nyl MTG Hol (1)
  • Cable Tie Mounting Base (6)
  • CF4/10 Female Connector (1)
  • CF4/10 Male Connector (1)
  • Compression (2)
  • Compression Connector (7)
  • Compression H-Tap Connector (1)
  • Compression Lug (9)
  • Compression Splice (3)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Conductor Lug (11)
  • Copper Connector (3)
  • Copper Inchcinch Crimps (1)
  • Crimp On Wire Connector (1)
  • Crimp-On Wire Joint (1)
  • Cross Connector (1)
  • C-Tap (1)
  • Direct Bury Splice Kit (1)
  • Disconnect Terminal (2)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drywall Screw (18)
  • Ed/Edh/Edc 225A Max 300 MCM Al Kit (2)
  • End Bracket (2)
  • End Plate (2)
  • End Section (1)
  • F FRM Cu/Al Pressureterm 4 #14-1/0 (2)
  • Feed Through Terminal (6)
  • Female Disconnect (3)
  • Female Disconnecter Terminal (3)
  • Female Disconnector (2)
  • Flex Lug (2)
  • Fork Terminal (13)
  • Fuse Terminal Block (1)
  • Fy Ins Nyl Fem-250 Disc, 16-14 Len . (1)
  • Ground Connector (3)
  • Ground Screw (3)
  • Heat Shrink Splice (1)
  • Hex Bolt (2)
  • Hex Head Masonry Screw (3)
  • Hex Nut (2)
  • H-Type Compression Connector (9)
  • Ins PP Ferrule 20, .5 MM2, LG .531 (1)
  • Installation Tool - Phillips and Hex Head (2)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulation Displacement Connector (4)
  • Insulation Piercing Connector (1)
  • Insulation-Tap Connector (9)
  • K-Lath Screw (5)
  • Lag Screw (6)
  • Lay-In Connector (2)
  • Line and Load Terminal (1)
  • Locking Fork (3)
  • M4/8 D2SFL 110/220V Ac (2)
  • Machine Screw (33)
  • Machine Screw Kit (2)
  • Male Disconnect (1)
  • MC512PA 1- 100 Horizontal (1)
  • Mechanical (47)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (17)
  • Mechanical Grounding Connector (1)
  • Metal Piercing Screw (3)
  • Mounting Rail (1)
  • Multi-Conductor Terminal Block (2)
  • Multi-Tap Connector (14)
  • Non Insul Ring NO8 , 1/4 Mount (2)
  • Non-Ins BS Ring Term 6 5/16 (1)
  • Non-Ins Fem-250 Flag Disc, 12-10 Le (1)
  • Non-Ins Tub Ring 2/2AN 5/16 (1)
  • Non-Metallic Cable Connector (2)
  • Panelboard Lug (3)
  • Partition Plate (1)
  • Power Splicer and Stud Block (1)
  • Power Terminal Block (2)
  • Push-In Connector (3)
  • Push-in Wire Connector (7)
  • Quick-Rotating (1)
  • RC65 Marker Vert 1-100 (1)
  • Ring Terminal (10)
  • Ring Tongue Compression Terminal (5)
  • Roof Flashing (1)
  • Roof Jack (1)
  • Round Head Machine Screw (6)
  • S Bolt-Main:1-2cualacsr (1)
  • Screw Anchor (1)
  • Screw Connection Single Level Ground Block (1)
  • Screw Connection Single Level-Through-Feed (7)
  • Self Drill Screw (4)
  • Self Drilling Screw (23)
  • Service Entrance Compression Splice (5)
  • Service Post Connector (11)
  • Sharp Frame Screw (2)
  • Sheet Metal Screw (10)
  • Single Barrel Lug (5)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Spade Terminal (1)
  • Splice Connector (2)
  • Splice Kit (2)
  • Splicing Connector (2)
  • Split - Bolt Connector 4/0 - 4 Awg (1)
  • Split Bolt Connector (34)
  • Standard Barrel Lug (4)
  • Submersible Connector (2)
  • Tek Screw (13)
  • Terminal (30)
  • Terminal Block (3)
  • Terminal Kit (1)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Terminal Strip (5)
  • Transformer Lug (1)
  • Twister Connector (6)
  • Twist-On Wire Connector (11)
  • Two Barrel Lug (2)
  • Two-Way Splice Connector (9)
  • Universal End Stop (2)
  • Vinyl 250 Piggyback, 22-16 (1)
  • Vinyl Insulated Butt Splice 16-14 (1)
  • Vinyl Ring, 12-10, 3/8 Stud (1)
  • Vinyl Ring, 22-16, 1/4 Stud (1)
  • Wing Twist Connector (2)
  • Wing Wire Connector (6)
  • Winged Wire Connector (10)
  • Wire Connector (16)
  • Wire Splice (2)
  • Wire Twist Connector (6)
  • ZS10 Feed Through TB (1)
  • ZS10-Pe Ground Terminal Block (1)
  • ZS16 Feed Through Terminal Block (1)
  • ZS35-Pe Ground Terminal Block (1)
  • ZS4-Pe Ground Terminal Block (1)
  • ZS4-S Lever Disconnect TB (1)
  • ZS4-SF Fuse Terminal Block (1)
  • ZS4-SF1-R1 Fuse TB W Indicator (1)
  • ZS4-SF1-R3 Fuse TB W Indicator (1)
  • ZS4-SP Disconnect TB With Plug (1)
  • ZS4-S-R2 Disconnect TB (1)
  • ZS6 Feed Through Terminal Block (1)
  • ZS6-Pe Ground Terminal Block (1)
  • Show More...

• Brand

  

  • 3M (21)
  • 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS (1)
  • ABB (28)
  • ABB INC., LOW VOLTAGE PRODUCTS (1)
  • Blackburn Grounding (10)
  • Blackburn Mechanical (91)
  • Buchanan (30)
  • BURNDY (161)
  • Burndy LLC (2)
  • Catamount (4)
  • COLOR-KEYED (25)
  • Dottie (3)
  • DOTTIE L H COMPANY (2)
  • Easy-Twist (2)
  • Eaton (33)
  • Eaton Corp (9)
  • EATON CUTLER-HAMMER (26)
  • Engineered Products CO. (1)
  • Erico, Inc. Eritec-Caddy (1)
  • Gardner Bender (2)
  • Highland (16)
  • Ideal (55)
  • Ilsco (3)
  • Ilsco Corporation (2)
  • L.H. Dottie CO. (22)
  • LH DOTTIE (193)
  • METALLICS INC. (1)
  • Minnesota Mining (3M) (12)
  • NSi (176)
  • Nsi Industries (99)
  • nVent CADDY (6)
  • PANDUIT (107)
  • Panduit Corporation (7)
  • Panduit® (52)
  • Peco Fasteners (74)
  • Peco Fasteners, Inc. (65)
  • Performance Plus (2)
  • Platinum Tools (7)
  • Polaris (48)
  • Scotchcast (2)
  • ScotchCode (1)
  • Scotchlok (40)
  • SELECTA ACORN FASTENERS (1)
  • Selecta Products (3)
  • Sta-Kon (139)
  • T&B Elec Suppl (2)
  • Thomas & Betts (5)
  • Thomas&Betts-Abb Ins Prod (9)
  • Ty-Rap (9)
  • Viton(R) (2)
  • WAGO CORPORATION (2)
  • Weidmuller, Inc. (13)
  • XX-Marathon Special Products (2)
  • Show More...

• Sub Brand

  

  • 3M(TM) (5)
  • B-Cap(R) (8)
  • Blackburn (74)
  • Burndy (27)
  • CADDY (7)
  • Color-Keyed (22)
  • Dragon Tooth In (2)
  • Easy Twist (2)
  • Easy-Twist(TM) (21)
  • Entrelec (5)
  • Greenie(R) (2)
  • Highland(TM) (14)
  • Ideal (2)
  • In-Sure(R) (7)
  • Klippon(R) (13)
  • NSI (32)
  • Pan-Lug (3)
  • Polaris Black (15)
  • Polaris Edge (2)
  • Polaris Gray (4)
  • POLARIS(TM) (11)
  • Powerplug(R) (2)
  • Scotchlok(TM) (3)
  • Spec-Kon (4)
  • Split Bolts (10)
  • Sta-Kon (31)
  • Twister(R) (7)
  • Type LAM (2)
  • Type LAMA (5)
  • Type LCD (4)
  • Type Sbc (8)
  • WingTwist(TM) (2)
  • WireTwist(TM) (6)
  • Show More...

• Material

  

  • 18-8 STAINLESS STEEL (2)
  • Aluminum (133)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Brass (26)
  • Brass with Copper Sleeve (2)
  • Bronze Alloy (16)
  • Bronze Alloy, Leaded (11)
  • Bronze, Leaded, Commercial (5)
  • Copper (324)
  • COPPER ALLOY (20)
  • Copper Alloy, Cast (5)
  • Fiber Reinforced Thermal Plastic (3)
  • Flame-retardant Polypropelene (49)
  • Flame-retardant polypropelene shell (3)
  • Insulated Nylon (2)
  • Nickel Alloy (1)
  • NICKEL PLATED STEEL (1)
  • Nylon 66 (2)
  • Nylon Housing, Copper Alloy Contacts (2)
  • Nylon/Polyamide 6.6 (5)
  • Polyamide (22)
  • Polycarbonate (3)
  • Polypropylene (5)
  • Porcelain (2)
  • PVC (1)
  • Stainless Steel (6)
  • Stainless Steel;Stainless Steel steel (2)
  • Steel (265)
  • Steel (Screw) (5)
  • Thermoplastic (21)
  • THERMOPLASTIC POLYESTER (1)
  • TIN PLATED BRASS (2)
  • Tin-Plated Aluminum (2)
  • Tin-Plated Copper (10)
  • Vinyl (2)
  • Vinyl Insulation (3)
  • Zinc (22)
  • Show More...

• Head Style

  

  • Bugle (16)
  • Flat (9)
  • Hex (45)
  • Pan (3)
  • Round (32)
  • Wafer (17)
  • Show More...

• Minimum Conductor Size

  

  • #12 AWG (23)
  • #14 AWG (26)
  • #14 AWG (Stranded) (9)
  • #16 AWG (10)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #18 AWG (6)
  • #2 AWG (3)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Stranded) (3)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (8)
  • #24 AWG (3)
  • #26 AWG (9)
  • #4 AWG (11)
  • #4 AWG (Stranded) (4)
  • #6 AWG (31)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Stranded) (18)
  • #8 AWG (4)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Solid) (2)
  • #8 AWG (Stranded) (3)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #14 AWG (5)
  • (2) #16 AWG (2)
  • (2) #18 AWG (11)
  • (2) #20 AWG (2)
  • (2) #22 AWG (3)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (3)
  • (3) #22 AWG (3)
  • 0.08 mm^2;28 AWG (2)
  • 16 AWG (1)
  • 22 AWG (1)
  • 250 MCM (4)
  • 26 AWG (5)
  • 4/0 AWG (1)
  • Show More...

• Length

  

  • 1 (46)
  • 1 in (4)
  • 1.06 (2)
  • 1.25 (1)
  • 1.85 (17)
  • 1/2 (19)
  • 1/2 in (13)
  • 1/2 INCH (1)
  • 1-1/2 (35)
  • 1-1/2 in (3)
  • 1-1/4 (34)
  • 1-1/4 in (5)
  • 1-1/8 (3)
  • 14.96 (2)
  • 1-5/8 (6)
  • 2 (31)
  • 2 in (17)
  • 2.37 (2)
  • 2.75 (2)
  • 2-1/2 (13)
  • 3 (8)
  • 3 in (5)
  • 3/4 (33)
  • 3/4 in (6)
  • 3/8 (4)
  • 3-1/2 (3)
  • 4 (5)
  • 4-1/2 (2)
  • 5 (1)
  • 6 (2)
  • 7.800000000000000 (2)
  • 7.9 (2)
  • 7/16 (2)
  • 8 (2)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (3)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #1/0 AWG (Stranded) (2)
  • #10 AWG (21)
  • #10 AWG/4 sq.mm (6)
  • #12 AWG (5)
  • #12 AWG/2.5 sq.mm (3)
  • #14 AWG (16)
  • #16 AWG/1.5 sq.mm (2)
  • #18 AWG (3)
  • #2 AWG (10)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (Stranded) (6)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (9)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (Stranded) (4)
  • #6 AWG (14)
  • #6 AWG (Stranded) (6)
  • #8 AWG (7)
  • #8 AWG (Stranded) (2)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #14 AWG (2)
  • (2) #6 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (6)
  • (3) #16 AWG (4)
  • (4) #12 AWG (4)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (10)
  • 1/0 AWG (14)
  • 1/0 AWG (Stranded) (5)
  • 10 AWG (1)
  • 12 AWG (5)
  • 14 AWG (1)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (13)
  • 2/0 AWG (Stranded) (3)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (8)
  • 250 kcmil (Stranded) (2)
  • 250 MCM (10)
  • 3/0 AWG (7)
  • 300 kcmil (2)
  • 300 MCM (1)
  • 350 kcmil (6)
  • 350 MCM (6)
  • 4/0 AWG (4)
  • 500 MCM (7)
  • 600 kcmil (2)
  • 600 MCM (2)
  • 750 MCM (2)
  • 8 AWG (2)
  • Show More...

• Finish

  

  • 18-8 Stainless (12)
  • Aluminum (14)
  • Bare (1)
  • Black Oxide (15)
  • Black Phosphate (3)
  • Blue (3)
  • COPPER (26)
  • Electro -Tin Plated (5)
  • EPDM Rubber Insulated (8)
  • Galvanic/Electrolytic Zinc Plated (6)
  • Green (3)
  • Nickel Plated (4)
  • NYLON (2)
  • Painted (2)
  • Plain (2)
  • Plastisol (2)
  • Plastisol Insulated (76)
  • Polycarbonate (3)
  • Polypropylene (2)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (27)
  • Tin Plated (99)
  • Tin Plated Bronze (18)
  • Tin Plated Copper (9)
  • Tinned (91)
  • Tin-Plated (18)
  • Yellow Zinc (8)
  • Yellow Zinc Plated (4)
  • Zinc (36)
  • Zinc Plated (188)
  • Show More...

• Current Rating

  

  • 10/15/17.5 A (2)
  • 100 A (3)
  • 20/22/28/32 A (2)
  • 225 A (5)
  • 24 A (5)
  • 30 A (5)
  • 30/38/41 A (4)
  • 400 A (5)
  • 600 A (2)
  • 760 AMPERE (1)
  • 85 AMPERE (1)
  • Show More...

• Voltage Rating

  

  • 1000 V (2)
  • 12 VDC (1)
  • 1k VAC (4)
  • 2000 (2)
  • 24 VDC (2)
  • 300 (7)
  • 300 V (14)
  • 35 (5)
  • 35 kV (18)
  • 500 W (2)
  • 600 (114)
  • 600 V (372)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (8)
  • 600 V ac (27)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (10)
  • 600V (3)
  • 630V (2)
  • EN 550V, UL 600V, 800V connection (3)
  • IEC 500V, UL 150V (4)
  • IEC 800V, EN 700V, UL 600V (13)
  • NA (3)
  • UL 300V (2)
  • Show More...

• Width

  

  • 0.01 (2)
  • 0.180000000000000 (2)
  • 0.2 (5)
  • 0.24 (10)
  • 0.32 (2)
  • 0.5 (3)
  • 0.63 (2)
  • 2 (2)
  • 28.58 mm;1.125 in (2)
  • 3.25 (1)
  • 5/16 in (9)
  • NA (4)
  • Show More...

• Insulation Material

  

  • EPDM Rubber (2)
  • Flame Retardant Polycarbonate (3)
  • Nylon (7)
  • Plastisol (30)
  • PVC (2)
  • Thermoplastic (17)
  • Vinyl (43)
  • Wemid (10)
  • Show More...

• Conductor Material

  

  • Aluminum (24)
  • Aluminum;Copper (42)
  • Brass with Copper Sleeve (4)
  • Bronze (1)
  • Copper (178)
  • Copper Alloy (Contacts) (2)
  • Copper;Aluminum (47)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • Copper;Tin Plated Stainle (3)
  • High Copper Alloy (4)
  • Polyamide 66 (2)
  • Steel (2)
  • Show More...

• Color

  

  • Aluminum (15)
  • Black (106)
  • Blue (94)
  • Blue Light (2)
  • Blue/Gray (2)
  • Brown (21)
  • Clear (15)
  • Copper (23)
  • Gray (42)
  • Gray 0 (11)
  • Green (19)
  • GREEN/YELLOW (13)
  • Grey / Dark grey (2)
  • Grey and Orange (1)
  • Ivory (3)
  • Metallic (41)
  • Natural (4)
  • OLIVE (3)
  • Orange (14)
  • Pink (12)
  • Purple (14)
  • Red (79)
  • Red/Tan (3)
  • RUBY (2)
  • Silver (4)
  • Steel (2)
  • Tan (12)
  • Tin Plated Copper (12)
  • White (19)
  • Yellow (99)
  • Show More...

• Insulation Color

  

  • Black (33)
  • Black (Code) (2)
  • Black (Die Color) (3)
  • Blue (31)
  • Blue (Code) (5)
  • Blue (Die Color) (2)
  • Blue/Gray (2)
  • Brown (Die Color) (3)
  • Dark Beige (9)
  • Gray (16)
  • Gray (Code) (2)
  • Gray (Die Color) (2)
  • Green (7)
  • Green/Yellow (2)
  • Orange (10)
  • Orange/Blue (2)
  • Pink (Die Color) (3)
  • Purple (6)
  • Purple (Die Color) (2)
  • Red (23)
  • Red (Die Color) (2)
  • Red/Yellow (3)
  • Silver (3)
  • Tan (5)
  • Tan/Red (2)
  • Tan/Yellow (2)
  • Yellow (33)
  • Yellow (Code) (2)
  • Show More...

• Thread Size

  

  • #10 (26)
  • #10-24 (6)
  • #10-32 (9)
  • #12 (11)
  • #12-24 (2)
  • #14 (5)
  • #6 (21)
  • #6-32 (32)
  • #8 (32)
  • #8-32 (16)
  • 1/2-13 (3)
  • 1/4 (8)
  • 1/4 in - 20 (6)
  • 1/4-20 (17)
  • 20 (2)
  • 3/8 (6)
  • 3/8-16 (8)
  • 32 (18)
  • 5/16 (2)
  • Show More...

• Thread Type

  

  • 13 (5)
  • 16 (2)
  • 2 (3)
  • 20 (5)
  • 3 (12)
  • Coarse (14)
  • UNC (56)
  • UNC-2A (4)
  • UNF (9)
  • UNF-2A (7)
  • Show More...

• Diameter

  

  • #10 AWG (29)
  • #12 AWG (6)
  • #14 AWG (3)
  • #6 AWG (36)
  • #8 AWG (33)
  • 1/2 (5)
  • 1/4 (5)
  • 1/4 in (16)
  • 3/8 in (4)
  • Show More...

• Number Of Conductors

  

  • 1 (85)
  • 10 (2)
  • 12 (2)
  • 2 (126)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 2 to 6 (7)
  • 3 (24)
  • 4 (19)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • Show More...

• Thread Length

  

  • 1 in (3)
  • 1/2 in (2)
  • 1-1/2 in (3)
  • 1-1/4 in (3)
  • 2 in (3)
  • Show More...

• Height

  

  • .411 (3)
  • .697 (2)
  • 0.05 (2)
  • 0.2 (2)
  • 0.22 INCH (1)
  • 1.13 (2)
  • 1.8 (1)
  • 10 (1)
  • 2 (3)
  • 2.17 (17)
  • 2.88 (2)
  • 3.75 (2)
  • Show More...

• Drive Type

  

  • Combo (26)
  • Hex (43)
  • Hex/Slotted/Phillips/Square (2)
  • Phillips (58)
  • Phillips Slotted (21)
  • Phillips;Slotted (20)
  • Phillips;Square (3)
  • Slotted (22)
  • Slotted/Phillips (27)
  • Square/Phillips (2)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - CU Splice (2)
  • # 8 AWG (STR) - CU Splice (2)
  • (2) 750-250 MCM - Dual Rated (2)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • 1,000V Maximum In Fixtures And Signs;Better Grip And More Leverage For Faster Connections With Less Effort;Comfortable Swept Wings Designed To Help Reduce Hand Fatigue;Comply With Federal Specification W-S-610E;Expanding Square-Wire Spring Provides A Secure Connection Every Time;Features: The Widest Red/Tan Wire Range In The Industry;Min. 2 #18 To Max. 4 #10;Model Number: 344;Suregrip Overmolding Provides Better Grip For Improved Leverage And More Torque;Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 D (2)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT41;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT51;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT52;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT54;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (2)
  • 1/0 AWG (STR) - CU Splice (2)
  • 10 Replacement Sleeves Per Bag (3)
  • 1-10 number sequence (1)
  • 11-20 number sequence (1)
  • 250 MCM (STR) - 1/2 Mounting Hole (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 250 MCM (STR) - CU Splice (2)
  • 3/0 AWG (STR) - CU Splice (2)
  • 300 MCM (STR) - 4/0 Pin Size (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (2)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (2)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 500 MCM (STR) - CU Splice (2)
  • 750 MCM (STR) - 500 Pin Size (2)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (29)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (3)
  • Barrel Style Butted (3)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper pressure bar. Bolt and nut of hex design (2)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (13)
  • Bolt and pressure bar of copper alloy, completely tin plated for corrosion resistance. Contoured spacer of electrolytic copper (5)
  • Catalog numbers ending with the suffix X indicate an expanded insulation grip. This means a wider wire entry to accommodate heavy wall insulation. Ring terminals Won't fall free even if the mounting screw loosens (3)
  • Classic Fin Design Provides Secure Grip For Extra Leverage On Maximum Wire Combinations (7)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (5)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Compact Design (3)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (6)
  • Corrosion Resistant (3)
  • Degree of protection: IP20 (5)
  • Designed for Making Ground Connections and Bonding Non-Metallic Sheathed Cable (2)
  • Designed to Penetrate Magnet Wire Insulation During Application;Eliminating The Need For Stripping;Brazing;Welding or Other Methods Of Joining Magnet Wire. (2)
  • Dual Barrel Provides Termination of two Conductors;High Strength (2)
  • Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver (1)
  • Easy Entry Copper Insulation Sleeve (2)
  • Easy Installation;No Special Tools Required (21)
  • Electro-Tin Plated (2)
  • Electro-Tin Plated for Low Contact Resistance (4)
  • Eliminates errors in premounting the base with respect to its orientation to wire bundle direction (2)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Excellent for Grounding and Continuous loop Applications;Made of 6061T-6 Aluminum Alloy (2)
  • Exceptional Wire-Range Capacity Three Models Handle Wire Combinations From as Small as 22 AWG to as Large as 6 AWG (4)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • E-Z-Ground® connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • Features: All-Aluminum Electro-Tin Plated design eliminates possible bi-metallic corrosion and provides shortest connector length design possible for easy installation in equipment with limited space. Solid electro-tin plated aluminum plug makes properly connection easily. Smooth surface on the solic EC plug provides greater area contact establishing excellent conductivity. Solid plug has equivalent cross-sectional area as current carrying equivalent copper wire permitting use of larger aluminum wire to co (2)
  • Features: Chip Resistant (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: Flat Hangar Screws, Tool Not Included, TK - with Drill Pt, Flat Hangar Tool w/ Safety Sleeve, Heavy Duty Steel Construction, Installs Hanger Screws Quickly (2)
  • Features: Invincibox Up to 2 Inch (6)
  • Features: Invincibox Up to 2 Inch, Tuff Pack (2)
  • Features: Invincibox upto 2 Inch (77)
  • Features: Invincibox upto 2 Inch, Tuff Pack (6)
  • Features: Lag Screws are used in Woodworking when Standard Wood Screws are too Short or too Small (25)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch (3)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch, Tuff Pack (3)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Features: Partial Thread, 120000 PSI Tensile, Grade 5 (6)
  • Features: Partial Thread, Corrosion Resistant (12)
  • Features: Phillips Socket Driver with One #2 & One #3 Phillips Bit, 1/4 IN Hex Socket Driver, 5/16 IN Hex Socket Driver & Allen Wrench (2)
  • Features: Reusable Six Compartment Box, Handy Assortment (4)
  • Features: Self Drilling, Invincibox Up to 2 Inch (9)
  • Features: Self Drilling, Invincibox Up to 2 Inch, Tuff Pack (17)
  • Features: Self Piercing, Self Tapping (8)
  • Features: The INSULUG Type YAEV Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Term (2)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available;Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating (4)
  • Features: Used to Grounding Pigtails (3)
  • Features: Wood Rocket, Invincibox Up to 2 Inch (7)
  • Features: Wood Rocket, Invincibox Up to 2 Inch, Tuff Pack (5)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Ferrules ensure reliable electrical connections when terminating conductors in screw clamp terminal blocks (6)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (8)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (17)
  • Flame Retardant (10)
  • For Aluminum;Copper Concentric Conductors;Compact Code Aluminum Strandings (3)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications (insulated conductor only). Performs as splice or tab for non-tension applications up to 600 volts, depending on size of connector (4)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Fully Insulated. Metal Insulation Sleeve. Molded Insulator. Internal Barrel Serrations. Funnel Entry. (2)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (9)
  • Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams (3)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (10)
  • Hex machine screw nuts are for screws smaller than 1/4 IN diameter;Invincibox up to 1/2 IN;Zinc plated - general use (4)
  • High Strength Solderless Service Connector (7)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (3)
  • Indoor (2)
  • Indoor/Outdoor (2)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Installs with standard wrenches (4)
  • Kit includes: 12 different Sta-Kon Terminals, WT112M Hand Tool, Package of TY525M Cable Ties and a WM-0 THRU 9 Wire Marker Book (1)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (22)
  • Long Barrel;High Conductivity (8)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (4)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made of High Copper Alloy;Re-usable (3)
  • Marked with Die Index and Color Coded (2)
  • Material Flame Retardant Polypropylene (3)
  • Meets Cec and Nec Code Changes For Non-Residential Fluorescent Luminaires With Ballasts;Perfect For Oem or Retrofit Lighting Applications;Patented Push-In Technology Quickly Locks Wires In Place;Passes UL 2459 & CSA 182.3 Finger Probe Requirements;Fits Through 1/2 In. Knockout;Pieces Pull Apart Safely and Easily;3/8 In. Strip Length Indicator;Thumb Ridges Provide Superior Grip;Model:102 (2)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations (16)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • Non-Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (7)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • One-piece molding - no lost parts (2)
  • Phillips Drive (1)
  • Protect your circuits with 5x20 mm fuse terminal blocks compliant with IEC 60947-7-3 standard (1)
  • PVC Insulation Eliminates Insulation Failures and Reduces Outage Costs;Removable Port and Screw Plugs (2)
  • Quick, reliable method of connection to terminal blocks and boards without the use of tools. Unique construction of the female disconnect offers long-term dependability (2)
  • Quickly identify the defective circuit thanks to the blown fuse indicator with leakage current less than 0.5 mA (1)
  • Recommended screw driver: 4 mm (2)
  • Recommended screw driver: 5.5 mm (2)
  • Robust spring design for high performance holding power (6)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Simplify the distribution thanks to the two jumper channels aligned with ZS4 feed through and ZS4-S-R1 disconnect terminal blocks (1)
  • Snap-in rail connection for rapid installation and removal (1)
  • Specifically Created For The Residential Markets;The T/R+ Replaces The Yellow;Tan and Red Connectors In The Majority Of Field Applications (2)
  • Splices Large Conductors Required for Commercial Service;Use as Low Cost Reducing Sleeve;All Sizes can be Installed with Popular Mechanical and Hydraulic Tools;Center Stop Assures Proper Conductor Positioning;Quick Identifications With Color-Coded Foil Caps (3)
  • Split-Bolt Has Free-Running Threads and Easy to Grip Wrench Flats;Highly Resistant to Season Cracking and Corrosion;High Strength (3)
  • Standard Barrel;High Conductivity (3)
  • Steel Crimp Sleeves - 100 Pcs Blister (2)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (9)
  • These fork terminals have extra-long PVC insulation sleeve for protection and stress relief at wires flex point. Brazed seam barrel is serrated for high pull-out value. Insulation is color-coded (7)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire) (2)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (15)
  • These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wires flex point. Brazed seam barrel is serrated to obtain high pull-out value (13)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (6)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Tin Plated to Inhibit Corrosion, Color Coded Barrel, Inspection Window, Beveled Wire Entry (3)
  • Tin-Plated to Inhibit Corrosion (4)
  • Tin-Plated to Inhibit Corrosion;Compact Design (5)
  • Top entry wire connection (1)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (13)
  • UL Listed 90 DEG C, 600 V - 35 KV,Tongue Angle: Straight (3)
  • Unique construction of the female disconnect offers long-term dependability. Brazed seam serrated barrel provides maximum tensile strength (8)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Vertical markings (4)
  • Vinyl Insulated Spade Terminal 12-10 AWG - 50 Pack (3)
  • With the same profile as ZS4-SF, the ZS4-SF-R2 disconnect lever is easily operated by hand and the wiring of the alternated disconnect and fuse circuits is easier (1)
  • Show More...

• Drive Size

  

  • #2 (6)
  • 1/4 in (2)
  • 3/8 in (3)
  • 5/16 in (4)
  • 7/16 in (2)
  • 9/16 in (3)
  • Show More...

• Overall Length

  

  • 0.205 in (2)
  • 0.244 in (4)
  • 0.43 in (2)
  • 0.571 in;14.5 mm (2)
  • 0.780 in (5)
  • 0.87 in;22.098 mm (2)
  • 0.899 in (2)
  • 0.97 in (6)
  • 0.986 in (2)
  • 1 in (4)
  • 1 in;25.4 mm (2)
  • 1.06 in (3)
  • 1.09 in (3)
  • 1.12 in (2)
  • 1.13 in (4)
  • 1.153 in (2)
  • 1.16 in (4)
  • 1.16 in;29.5 mm (2)
  • 1.31 in (3)
  • 1.47 in (4)
  • 1.47 in;37 mm (2)
  • 1.47 in;37.3 mm (3)
  • 1.50 in (2)
  • 1.516 in;38.5 mm (3)
  • 1.54 in (2)
  • 1.55 in;39.4 mm (2)
  • 1.62 in (2)
  • 1.75 in (3)
  • 1.752 in (2)
  • 1.81 in (2)
  • 1.831 in;46.5 mm (4)
  • 1.84 in (2)
  • 1.88 in (2)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 2 in (8)
  • 2.03 in (2)
  • 2.25 in (2)
  • 2.63 in (2)
  • 2-25/32 in (5)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 3 in (2)
  • 3.18 in (2)
  • 3.25 in (2)
  • 3.5 in (3)
  • 3-3/16 in (2)
  • 4 in (2)
  • 4-1/4 in (2)
  • 4-3/16 in (2)
  • 6.38 in (2)
  • 8 in (2)
  • Show More...

• Thickness

  

  • 0.02 (3)
  • 0.025 (2)
  • 0.04 (2)
  • 0.04 INCH (1)
  • 0.040000000000000 (2)
  • 0.06 (2)
  • 0.08 (2)
  • Show More...

• Additional Information

  

  • APPLICATION AIR CONDITIONING AND REFRIGERATION SYSTEM, CONTROL PANEL, ELEVATOR SYSTEM, HEATING, MATERIAL HANDLING EQUIPMENT, MOTOR CONTROL, SWITCHGEAR (1)
  • APPLICATION GYPSUM; WEIGHT 1.42 LB; PACKAGING QUANTITY 100 PER STANDARD PACK; DRIVE TYPE PHILLIPS; DRIVE SIZE #3 (1)
  • COLOR GRAY (1)
  • Drc Model (2)
  • Show More...

• Overall Width

  

  • 0.01 in (2)
  • 0.161 in (2)
  • 0.197 in (2)
  • 0.201 in;5.1 mm (4)
  • 0.311 in;7.9 mm (2)
  • 0.339 in (2)
  • 0.37 in;9.5 mm (2)
  • 0.520 in (2)
  • 0.717 in (2)
  • 0.720 in (2)
  • 0.820 in (2)
  • 0.906 in (4)
  • 1.33 in (5)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Butt Splice (3)
  • Compression (30)
  • Compression Lug (3)
  • Compression;Crimp (22)
  • Crimp (6)
  • Disconnect Terminal (4)
  • Feed-Through Terminal (6)
  • Female Disconnecter (3)
  • Fork Terminal (17)
  • Insulation Displacement Connector (3)
  • Push-In (3)
  • Ring Terminal (9)
  • Ring Tongue (7)
  • Screw (68)
  • Splice Connector (6)
  • Split (27)
  • Spring (2)
  • Tension (2)
  • Tongue (11)
  • TUBULAR WIRE CLAMP WITH SCREW (1)
  • Twist-On (11)
  • Winged (10)
  • Wire Terminal Disconnect (2)
  • Show More...

• Overall Height

  

  • 0.380 in (5)
  • 0.697 in (2)
  • 0.81 in (5)
  • 0.866 in (2)
  • 1.016 in (2)
  • 1.043 in (2)
  • 1.142 in (2)
  • 1.252 in (4)
  • 1.85 in (2)
  • 2.205 in;56 mm (2)
  • 2.362 in;60 mm (3)
  • 2.5 in (2)
  • 3.13 in;79.5 mm (3)
  • Show More...

• Weight

  

  • 0.0003 lb (2)
  • 0.002 lb (2)
  • 0.003 lb (5)
  • 0.004 lb (3)
  • 0.006 lb (5)
  • 0.01 lb (74)
  • 0.01 lb/EA (8)
  • 0.02 lb (14)
  • 0.02 lb/EA (13)
  • 0.03 lb (7)
  • 0.03 lb/EA (11)
  • 0.04 lb (2)
  • 0.04 lb/EA (8)
  • 0.05 lb (2)
  • 0.05 lb/EA (9)
  • 0.06 lb/EA (12)
  • 0.07 lb (2)
  • 0.07 lb/EA (3)
  • 0.08 lb (5)
  • 0.08 lb/EA (11)
  • 0.09 lb (2)
  • 0.09 lb/EA (7)
  • 0.1 lb/EA (3)
  • 0.11 lb (5)
  • 0.11 lb/EA (2)
  • 0.12 lb/EA (5)
  • 0.13 lb/EA (7)
  • 0.14 lb/EA (3)
  • 0.15 lb (2)
  • 0.15 lb/EA (3)
  • 0.16 lb/EA (4)
  • 0.17 lb/EA (5)
  • 0.18 lb (2)
  • 0.19 lb/EA (7)
  • 0.2 lb (2)
  • 0.22 lb (3)
  • 0.22 lb/EA (2)
  • 0.25 lb/EA (3)
  • 0.26 lb/EA (3)
  • 0.28 lb (2)
  • 0.28 lb/EA (3)
  • 0.3 lb/EA (3)
  • 0.34 lb (2)
  • 0.35 lb (3)
  • 0.35 lb/EA (3)
  • 0.36 lb (2)
  • 0.37 lb (2)
  • 0.38 lb (2)
  • 0.4 lb (3)
  • 0.41 lb (2)
  • 0.41 lb/EA (2)
  • 0.44 lb (4)
  • 0.45 lb (2)
  • 0.46 lb (4)
  • 0.48 lb (2)
  • 0.49 lb (2)
  • 0.5 lb (2)
  • 0.53 lb/EA (2)
  • 0.55 lb (2)
  • 0.55 lb/EA (2)
  • 0.56 lb (2)
  • 0.59 lb/EA (2)
  • 0.84 lb (2)
  • 1 lb/EA (10)
  • 1.04 lb (2)
  • 1.5 lb (2)
  • 1.93 lb (2)
  • 2 lb (2)
  • Show More...

• For Use With

  

  • #22 to #12 AWG Solid;Stranded Wire (3)
  • 1-Ballast Fixture New Installations and Retrofits (2)
  • 35 mm Rail (2)
  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • All Aluminum Applications (2)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (11)
  • Aluminum/Copper Code Conductor (3)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper and Aluminum Conductor (19)
  • Copper Cables;Aluminum Cables (6)
  • Copper Code Conductors (8)
  • Copper Conductor (19)
  • Copper or Aluminum Conductors (2)
  • Copper Wire (3)
  • Direct Burial Applications in Earth or Concrete (2)
  • Flexible, Extra-Flexible, and Code Stranded Copper Conductors (3)
  • For Combinations of Aluminum-to-Aluminum Conductors;Aluminum-to-Copper Conductors (3)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (7)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Greater than 2000 Volts Consult Cable (2)
  • Hydraulic Tool (9)
  • Overhead Tension Connection (2)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (10)
  • Standard Conductors (5)
  • Stranded Aluminum or Copper Code Conductors (7)
  • Stranded Copper Conductors (5)
  • Temporary Connections to Male Disconnects and Terminal Blocks. (2)
  • Terminate;Splice (2)
  • Terminate;Splice;Tap Power Connectors (9)
  • Wire Termination (21)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (15)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Show More...

• Maximum Voltage Rating

  

  • 2000 V (3)
  • 300 V (6)
  • 35 kV (32)
  • 400 V (2)
  • 550/600/800 V (2)
  • 600 V (115)
  • 600 V (Building Wire);1000 V (Maximum Signs/Lighting Fixture) (8)
  • 600 V ac (60)
  • 600 V;1000 V (Lighting Fixture/Luminaries/Sign) (6)
  • 600/700/800 V (7)
  • 800 V (6)
  • Show More...

• Package Quantity

  

  • 1 ct (15)
  • 1 CT;10 PK (3)
  • 1 CT;100 PK (6)
  • 1 CT;12 PK (2)
  • 1 CT;150 PK (2)
  • 1 CT;20 PK (2)
  • 1 CT;30 PK (2)
  • 1 CT;50 Pk (3)
  • 1 CT;6 Pk (3)
  • 1 PK (2)
  • 10 CT (3)
  • 10 CT;100 PK (10)
  • 10 CT;50 PK (3)
  • 10 PK (2)
  • 100 BG (2)
  • 100 BX (15)
  • 100 CT (75)
  • 100 CT;1000 PK (4)
  • 100 CT;400 PK (3)
  • 100 CT;500 PK (7)
  • 100 CT;600 PK (5)
  • 100 CT;800 PK (5)
  • 100 JR (16)
  • 100 PC (8)
  • 100 PK (14)
  • 100 Pouch;1 CT;1000 PK (4)
  • 1000 BX (2)
  • 1000 CA (6)
  • 1000 CT;10000 PK (9)
  • 1000 CT;5000 PK (3)
  • 1000 JR (3)
  • 1000 PK (2)
  • 12 CT (9)
  • 12 CT;120 PK (6)
  • 12 PK (2)
  • 12 PK/CT;100 PK (5)
  • 15 PK (10)
  • 2 CT (3)
  • 20 PC (2)
  • 200 CT (2)
  • 200 CT;2000 PK (2)
  • 24 CT (2)
  • 240 CT (2)
  • 25 BG (14)
  • 25 CT (7)
  • 25 CT;100 PK (2)
  • 25 CT;125 PK (2)
  • 25 CT;150 PK (2)
  • 25 CT;250 PK (17)
  • 25 PK (9)
  • 250 CT (2)
  • 3 CT (5)
  • 3 CT;30 PK (2)
  • 300 CT;250 PK (2)
  • 300 JR (3)
  • 4 CT (6)
  • 5 CT;50 PK (2)
  • 50 BX (3)
  • 50 CT (24)
  • 50 CT;200 PK (2)
  • 50 CT;250 PK (2)
  • 50 CT;500 PK (9)
  • 50 PC (3)
  • 50 PK (9)
  • 500 BG (10)
  • 500 CT (3)
  • 500 CT;5000 PK (9)
  • 500 JR (2)
  • 500 Jug (2)
  • 500 PK (3)
  • 5000 PK;100 CT (3)
  • 6 CT (18)
  • 6 CT;60 PK (5)
  • 6 PK (3)
  • 6 PK/CT;100 PK (15)
  • 75 CT (2)
  • Show More...

• Application

  

  • Aluminum to Aluminum or Copper to Copper Magnet Wire Connections. (2)
  • Appliances;Fixtures;Automotive;Marine;Commercial Construction;Industrial Construction;Irrigation;Residential Construction (2)
  • Applications certified to 600 V and recommended up to 35 kV¥ (13)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (5)
  • Brick, Concrete, Mortar, Wood (25)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (19)
  • Drywall, Particle Board, Wood (12)
  • Drywall, Wood, Aluminum (8)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (36)
  • Electrical (2)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (2)
  • End stops are mounted at the extremity of the terminal board assembly in order to give additional support to the terminal blocks (1)
  • Fits 5x20mm and 5x25mm fuses for circuit protection (1)
  • Fits 5x20mm fuses for circuit protection (1)
  • For Aluminum And Copper Conductors (13)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (10)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (3)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (6)
  • For Copper Cable To Bar, Direct Burial Cable (5)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (10)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (5)
  • For Direct Burial Applications In Earth Or Concrete, Copper (2)
  • For Direct Burial In Earth And Concrete (2)
  • For Dry Locations (1)
  • For Dry Locations;Insulating and protecting wires and cables (5)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (2)
  • For Grounding And Bonding Applications (4)
  • For high temperature applications over 105 degree C (2)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (14)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (3)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For quickly connecting or disconnecting a terminal (3)
  • For Removing Metal And Can Be Used In Heavier Gauge Metals (32)
  • For Standard Conductor Splice (5)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (12)
  • For Use With Copper And Aluminum Conductors (2)
  • For use with SNA terminal blocks (3)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (18)
  • Framing, Electrical, Plumbing and Sheet Metal Applications (6)
  • General Purpose (4)
  • Grounding and Bonding Applications (9)
  • Grounding Application (3)
  • Grounding Wire (6)
  • Ind Facilities & Factories - Facility - Other (2)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (40)
  • Insulating or Joining 2 or more conductors (8)
  • Non-Indicating (2)
  • NSI (8)
  • Other (7)
  • Overhead Tension Connection (2)
  • Provides terminating point for a group of wires running in one direction (3)
  • Residential and commercial wiring jobs (6)
  • Splicing Wire (26)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (26)
  • Stranded Aluminum or Copper Code Conductor (8)
  • Terminate, Splice, Tap Power Connectors (93)
  • To be used for marking SNA terminal blocks (4)
  • Utility/Ground Grid (5)
  • Wall Plates (2)
  • Wire Termination (177)
  • Show More...

• Category Description

  

  • BEAM, RA, EDGE, & PARALLEL CLAMPS (2)
  • BOX SUPPORT (3)
  • Comp & Mech Lugs and Butt Splices (231)
  • Datacom Wiring Devices and Accessories (13)
  • Disconnect Accessories (2)
  • DISCONNECTS (3)
  • FASTENERS (9)
  • Fuses & Fuse Accessories (16)
  • HAND TOOLS (5)
  • HEAT/COLD SHRINK (18)
  • MISC FITTINGS (4)
  • Powerdefense Breakers (13)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (368)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (69)
  • SPLICE KITS (11)
  • SPLIT BOLTS (196)
  • T&B C TAP LUGS (27)
  • TAPE (1)
  • TERMINAL BLOCK ACESSORIES (25)
  • TERMINAL BLOCKS POWER DIST BLOCKS (84)
  • TERMINALS (354)
  • TRANSFORMER ACCESSORIES (1)
  • WIRE LUBE, MARKERS, & TIES (8)
  • WIRE NUTS (136)
  • Show More...

• Poles

  

  • 1 (173)
  • 3 (3)
  • 4 (1)
  • Show More...

• Housing Material

  

  • Aluminum (82)
  • Copper (22)
  • PHENOLIC (2)
  • Thermoplastic (5)
  • Tin Plated Copper (6)
  • Show More...

• Minimum Qty

  

  • 100 (225)
  • 1000 (25)
  • 15 (5)
  • 150 (3)
  • 20 (5)
  • 200 (8)
  • 20000 (1)
  • 25 (18)
  • 250 (11)
  • 30 (1)
  • 300 (2)
  • 350 (1)
  • 4000 (1)
  • 50 (77)
  • 500 (45)
  • 5000 (1)
  • 6000 (3)
  • 75 (4)
  • 750 (2)
  • Show More...

• Wire Type

  

  • Al/Cu (4)
  • ALUMINUM/COPPER (5)
  • B,C,D,K,M,I (10)
  • Class A & B (29)
  • Class B & C (80)
  • COPPER (19)
  • CU Wire Only (25)
  • Solid, Stranded, Stranded (Tin Bonded) (10)
  • STRANDED (1)
  • Show More...

• Temperature Rating

  

  • 105 C (16)
  • 105 DEG C (1)
  • 105 DEG C Shell Rated (10)
  • 150 DEG C (2)
  • 194 (15)
  • 194° F (3)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (43)
  • 302 Degrees Fahrenheit (150 Degrees Celsius) (2)
  • 32 TO 120 DEG F (1)
  • 75 C (4)
  • 90 (4)
  • 90 C (78)
  • 90 DEG C (1)
  • 900 DEG F (1)
  • Show More...

• Type

  

  • 2-Wire Standard Version (2)
  • ADHESIVE (1)
  • Aluminum Double Lug (5)
  • Aluminum Lay-In Lug (4)
  • Aluminum Pin Adapters (2)
  • Aluminum Single Lug (3)
  • Aluminum Splice (4)
  • AMS, Dual Rated (2)
  • Automatic Tension Splice (2)
  • Bi-Metallic Pin (3)
  • Bolted Lugs & Terminals (22)
  • Bugle Head Drywall Screw (8)
  • Bugle Head Wood Rocket Drywall Screw (12)
  • BUTT (1)
  • Butt Splice (6)
  • Butted (4)
  • Butted Seam, Funnel Barrel (2)
  • Cable Connector (2)
  • Cable Tie (4)
  • Cap Screw (18)
  • Cold Shrink Splice (10)
  • Compression Lug (9)
  • Compression Splice Service Entrance (13)
  • Compression Tap (4)
  • Copper Connectors (6)
  • Copper Split Bolts (12)
  • Covered Single Wire Ferrule (10)
  • Crimp Sleeve Wire Connectors (3)
  • C-Tap (5)
  • C-Taps (4)
  • Deck Screw (5)
  • DIN RAIL (1)
  • DIRECT BURIAL (1)
  • Disconnect (18)
  • Disconnect Connectors (3)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Dual-Rated (4)
  • Dual-Rated Mechanical Connector (17)
  • END SECTION (1)
  • EZ, SELF DRILLING (1)
  • FEMALE DISCONNECT (1)
  • Flat Hangar Screw (2)
  • Flat Head Wood Screw (2)
  • Fork Terminal (13)
  • Frame Screw (2)
  • GAR (16)
  • GB (2)
  • GBM (3)
  • GC (4)
  • Gel Tap Splice Kits With Connector (2)
  • Ground Machine Screw (3)
  • Heat-Shrink (6)
  • Hex Bolt (15)
  • Hex Head Lag Screw (25)
  • Hex Screw (2)
  • Hex Washer (3)
  • H-Type Compression Tap Connector (11)
  • IN-Line Splicer/Reducer (4)
  • Installation Tool (2)
  • INSULATED (2)
  • Insulated Conductor Connectors (4)
  • Insulation Displacement (12)
  • Insulation Piercing Connectors (3)
  • Integrated Mounting Hole (4)
  • KC and K2C Series (23)
  • K-Lath Screw (6)
  • KS, Compact (2)
  • LOCKING (4)
  • Locking Fork Terminal (6)
  • Long Barrel (6)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (2)
  • Long Barrel - Two Hole (5)
  • Low Voltage Mounting Plates (2)
  • MACHINE SCREW (97)
  • Machine Screw Hex Nut (4)
  • Machine Screw Kit (4)
  • Masonry Screw (2)
  • Mechanical Grounding (10)
  • Mechanical Lug (8)
  • Molded case circuit breaker accessory (18)
  • MOUNTING BASE (6)
  • Multi Cable (14)
  • Non-Insulated Fork Terminal (2)
  • Non-Insulated Ring Terminal (21)
  • Nut (3)
  • Nylon Fully Insulated Female Disconnect (5)
  • Nylon Insulated Female Disconnect (5)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (2)
  • Nylon Insulated Open Top 90 Degree Flag Female Disconnect (2)
  • Nylon Insulated Ring Terminal (10)
  • Nylon Insulated Wire Joint (3)
  • Offset Entry (3)
  • Offset Pin (8)
  • ONE PIECE, DEAD FRONT (1)
  • Oval Head Wall Plate Screw (2)
  • Pan Head Self Drilling Screw (8)
  • Panelboard Lug (2)
  • PIGTAIL (2)
  • Polypropylene Insulated Ferrule (5)
  • Push In Wire Connectors (3)
  • Push-In (10)
  • Replacement Sleeves (3)
  • RING (10)
  • Ring Terminal (25)
  • Ring Tongue (3)
  • ROOF FLASHING (1)
  • SCREW (6)
  • Screw Gun Brackets and Accessories (2)
  • Secure Grip Wire Connectors (6)
  • Self Drill (23)
  • Service Post Connectors (8)
  • Sharp Point Tapping Screw (2)
  • Sheet Metal Screw (33)
  • Short Barrel - CU Splice (12)
  • Short Barrel - One Hole (14)
  • Single Sided Entry (20)
  • SNK Terminal Blocks (1)
  • Solid Pin (10)
  • SPLICE (14)
  • Splice Connector (2)
  • Split-Bolt (26)
  • STANDARD (2)
  • Standard Barrel - ALCU Splice (6)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Wire Connectors (8)
  • Submersible Pedestal Connectors (9)
  • TAB STYLE (1)
  • Tapping Screw (16)
  • Taps (2)
  • Tek Screw (2)
  • Terminal Block (40)
  • Terminal Block Accessories (4)
  • Terminal block accessory (6)
  • Terminal block relay (3)
  • Terminal blocks (23)
  • TERMINAL KIT (1)
  • Tin Plated Copper Split Bolt (9)
  • TP-F (5)
  • Transformer Lug Kit (2)
  • Twist-On (9)
  • Two-Bolt Connector (1)
  • Vinyl Insulated Butt Splice (8)
  • Vinyl Insulated Female Disconnect (2)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (23)
  • Vinyl Insulated Ring Terminal (35)
  • Vinyl Insulated Spade Terminal (3)
  • Wafer Head Self Drilling Screw (6)
  • Washer Head Self Drilling Screw (20)
  • Wide Range Tap Connectors (3)
  • Winged Wire Connectors (11)
  • WIRE (4)
  • Wire Connectors & Termination (2)
  • YA-E (2)
  • YAEV, Heavy Duty (2)
  • Show More...

• Wire Size

  

  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (2)
  • #24-16 AWG (2)
  • #24-8 AWG (3)
  • #26-10 AWG (11)
  • (3) #26-12 AWG (6)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (2)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (2)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (8)
  • 10 (24)
  • 10 AWG (1)
  • 12 (2)
  • 12 - 10 AWG (2)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (2)
  • 12 AWG (2)
  • 12-10 AWG (47)
  • 14 (19)
  • 16 (3)
  • 16-14 AWG (12)
  • 18 (7)
  • 18 AWG (1)
  • 18 TO 6 AWG (CE), 18 TO 4 AWG (COPPER) (1)
  • 18-14 AWG (25)
  • 1mm2 (2)
  • 2 AWG (2)
  • 2/0-14 AWG (5)
  • 22 - 10 (6)
  • 22 - 18 (3)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 22-14 AWG (2)
  • 22-16 AWG (21)
  • 22-18 AWG (1)
  • 250 MCM-6 AWG (13)
  • 3/0-6 AWG (13)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 350 TO 500 KCMIL (MAIN), 4 TO 4/0 AWG (TAP) (1)
  • 4 AWG (3)
  • 4 SOL - 1/0 STR (3)
  • 4-14 AWG (8)
  • 500 MCM-4 AWG (10)
  • 6 AWG (8)
  • 6 SOL - 1/0 STR (2)
  • 600 MCM-6 AWG (4)
  • 750-250 MCM (7)
  • 8 (3)
  • 8 AWG (7)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Show More...

• Mounting

  

  • 0.25 (2)
  • 0.28 (2)
  • 0.31 (9)
  • 0.62 (2)
  • 1 (2)
  • 1.13 (2)
  • 1/2 Mounting Hole (9)
  • 1/2 Mounting Holes (15)
  • 1/4 Mounting Hole (5)
  • 15/32 (4)
  • 17/32 (2)
  • 3/8 (5)
  • 3/8 Mounting Hole (4)
  • 5/16 (30)
  • 5/8 (2)
  • 7/8 (4)
  • 9/32 (9)
  • Adhesive (2)
  • Clamp (3)
  • DIN 1-3 (2)
  • DIN 3 (1)
  • None (23)
  • One screw (2)
  • SCREW (1)
  • Self-Adhesive (4)
  • Snap In Mount (2)
  • SURFACE (1)
  • Show More...

• Size

  

  • #10 (15)
  • #10 X 1 IN (5)
  • #10 X 1/2 IN (4)
  • #10 x 1-1/2 IN (4)
  • #10 x 1-1/4 IN (3)
  • #10 x 2 IN (4)
  • #10 x 3/4 IN (5)
  • #12 x 1 IN (3)
  • #12 x 1-1/4 IN (2)
  • #12 x 2 IN (2)
  • #12 x 3/4 IN (2)
  • #6 (9)
  • #6 AWG Code (2)
  • #6 x 1 IN (3)
  • #6 x 1-1/2 IN (2)
  • #6 x 1-1/4 IN (4)
  • #6 x 1-1/8 IN (3)
  • #6 x 1-5/8 IN (3)
  • #6 X 2 IN (4)
  • #6-32 x 1 IN (3)
  • #6-32 x 1/2 IN (4)
  • #6-32 x 1-1/2 IN (3)
  • #6-32 x 1-1/4 IN (3)
  • #6-32 x 2 IN (4)
  • #6-32 x 2-1/2 IN (2)
  • #6-32 x 3 IN (2)
  • #6-32 x 3/4 IN (3)
  • #8 (8)
  • #8 x 1 IN (6)
  • #8 X 1/2 IN (7)
  • #8 x 1-1/2 IN (4)
  • #8 x 1-1/4 IN (4)
  • #8 x 2-1/2 IN (2)
  • #8 X 3/4 IN (7)
  • #8-32 X 1 IN (2)
  • #8-32 x 2 IN (2)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1.81 in (1)
  • 1/2 (1)
  • 1/4 (9)
  • 1/4 x 1 (3)
  • 1/4 x 1/2 (2)
  • 1/4 X 1-1/2 (4)
  • 1/4 x 1-1/4 (2)
  • 1/4 X 2 (3)
  • 1/4 x 2-1/2 (2)
  • 1/4 x 3 (2)
  • 1/4 x 3/4 (3)
  • 1/4" (8)
  • 10 (13)
  • 10x53.5x35mm (1)
  • 10x56.1x48.8mm (1)
  • 12 (5)
  • 16x59x58mm (1)
  • 2 INCH (5)
  • 2.77x.236x3.10 (1)
  • 2-25/32 inch (5)
  • 3 MM THK (1)
  • 3/4 (1)
  • 3/8 x 1 (3)
  • 3/8 x 1-1/2 (3)
  • 3/8 x 1-1/4 (2)
  • 3/8 x 3/4 (2)
  • 3/8" (2)
  • 3-1/2 Inch (3)
  • 4/0 AWG Code (2)
  • 5.2x53x47.3mm (1)
  • 5.2x53x51.4mm (1)
  • 5.2x59.5x47.4mm (1)
  • 5/16" (2)
  • 6 (21)
  • 62.5x6x38mm (1)
  • 6-32 (2)
  • 6x53x47.3mm (1)
  • 6x59.5x47.4mm (1)
  • 8 (21)
  • 8.54 INCH L X 5.5 INCH W X 3.12 INCH H (1)
  • 8-32 (1)
  • 8x53x47.3mm (1)
  • 8x59.5x47.3mm (1)
  • 8x59.7x45.6mm (2)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.25 - W=.906 - ID=.354 (2)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (2)
  • L=1.417 - W=.787 (3)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.574 - W=.866 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.840 - W=1.870 - H=1.870 (3)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.106 - W=1.102 (2)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • Length 1-1/2 inch (1)
  • Length 1-11/16 inch (1)
  • Length 1-13/16 inch (3)
  • Length 1-7/16 inch (1)
  • Length 1-7/8 inch (1)
  • Length 2-3/16 inch (1)
  • Length 2-7/16 inch (1)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • VARIOUS SIZ (2)
  • Various Sizes Included (1)
  • Show More...