Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • #6 Anchor Kit Wall Driller ( Zinc ) Includes Phillips (2)
  • 2 Position Bridge (3)
  • 225A FD Collar Kit_(3) Terminals and (2)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (5)
  • 3M™ Cold Shrink End Caps Ec Series (4)
  • 3M™ Cold Shrink QS-Iii 3/C Armored or Non-Armored Cable Spli (2)
  • 3M™ Heat Shrink Cable Breakout Boot (3)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (8)
  • 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 (23)
  • 3M™ Highland™ Nylon Fully Insulated Butted Seam Female Disco (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Ring Tongues (7)
  • 3M™ Highland™ Wire Connectors (3)
  • 3M™ Performance Plus™ Wire Connectors (4)
  • 3M™ Rejacketing Sleeves RJS Series (5)
  • 3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Seri (2)
  • 3M™ Scotchcode™ Wire Marker Tape Dispenser STD (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (11)
  • 3M™ Scotchcode™ Wire Marker Write-On Dispensers (3)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Idc Connector 562 (2)
  • 3M™ Scotchlok™ Idc Connector 567 (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 3M™ Splice Kit Uf (3)
  • 3M™ Standard Nylon Cable Ties (4)
  • 3M™ Thin-Wall Heat Shrink Tubing Eps-300 (5)
  • 5 Position Bridge (2)
  • 6 In Yellow Detectable Underground Line Tape Caution Burie (2)
  • 6 X 1-1/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • 6 X 1-5/8 Drywall Screws Phillips Bugle Head Coarse (2)
  • Anchor Kit (5)
  • B33, B342, White, 0.313 X 2" Fit (2)
  • Beam Clamp (5)
  • Butt Splice (6)
  • Butt Splice Connector (6)
  • Cable Connector (2)
  • Cable Staple (4)
  • Cable Tie (30)
  • Cable Tie Mounting Base (9)
  • Clip, Conduit, (4)
  • Combo Nut Washer, 1/4"-20 Thread (2)
  • Compression (32)
  • Compression Connector (3)
  • Compression Lug (6)
  • Compression Split Bolt Connector (2)
  • Concrete Anchor System (3)
  • Conductor Lug (11)
  • Conduit to Beam Fastener (7)
  • Conduit to BM FS, 1 1/2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 1" Emt, 3/4" Imc, Rigid, 1/8" to 1/4" Flan (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1/2", 3/4" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to BM FS, 3/8" Conduit, 1/8" to 1/4" Flange (2)
  • Copper Compression Lug (2)
  • Crimp On Wire Connector (2)
  • Detectable Tape (2)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drop in Anchor (2)
  • Drywall Screw (11)
  • Ed/Edh/Edc 225A Max 300 MCM Al Kit (2)
  • End Cover (2)
  • Eye Bolt (3)
  • F FRM Cu/Al Pressureterm 4 #14-1/0 (2)
  • FEM8D2S End Plate (2)
  • Female Disconnect (3)
  • Female Disconnecter Terminal (3)
  • Fender Washer (7)
  • Filament Tape (2)
  • Fish Tape (2)
  • Flat Washer (8)
  • Fork Terminal (6)
  • Ground Connector (3)
  • Ground Screw (3)
  • Hanger, Fixture, Florescentlight (2)
  • Heat Shrink Tube (2)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • Hex Nut (7)
  • H-Type Compression Connector (9)
  • Installation Tool - Phillips and Hex Head (2)
  • Insulated Butt Splice (4)
  • Insulating Sleeve (12)
  • Insulation Displacement Connector (4)
  • Insulation-Tap Connector (6)
  • Jack Chain (2)
  • K-Lath Screw (5)
  • Kwikwire Accessory, Bolt Style SGL Type (2)
  • Kwikwire Accessory, Toggle Style Y Type (2)
  • Label (3)
  • Label Polyester 0.75IN X 21FT BK/WT (2)
  • Label Vinyl 0.75IN X 21FT BK/WT (2)
  • Lag Screw (6)
  • Line Measuring Tape (5)
  • Linemeasuring Tape (5)
  • Lock Washer (4)
  • Locking Fork (4)
  • M4/8 D2SFL 110/220V Ac (2)
  • Machine Screw (6)
  • Machine Screw Anchor (2)
  • Machine Screw Kit (2)
  • Mechanical (100)
  • Mechanical Connector Lug (12)
  • Metal Piercing Screw (3)
  • Molds (2)
  • Multi-Cable Staple (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (8)
  • No Twist SQ Washer, 7/16" Hole, 3/8" Bolt, ZN PLTD (2)
  • Non-Metallic Cable Connector (2)
  • Partition Plate (2)
  • Plastic Insulated Staple (2)
  • Plug-In Bridge (2)
  • Power Cable Splice Cover (2)
  • Power Cable Termination (4)
  • Purlin Clip (3)
  • Push-in Wire Connector (7)
  • Ring Terminal (7)
  • Ring Tongue Compression Terminal (5)
  • RUN/TAP (8)
  • Screw Gun Bracket (2)
  • Screw Gun Bracket, 16 In Stud S (2)
  • Self Drilling Screw (2)
  • Service Post Connector (10)
  • Sheet Metal Screw (10)
  • Single Sided Entry Insulated Multi-Tap Connector (2)
  • Splice (32)
  • Splice Cap (2)
  • Splice Connector (2)
  • SPLICE REDUCER (6)
  • Split Bolt Connector (16)
  • Spring Nut (3)
  • SPST Support Box (2)
  • Square Washer (3)
  • Standard Barrel Single Hole Compression Lug (10)
  • STANDARD TIE (3)
  • Staple (14)
  • Submersible Connector (2)
  • Tap Bolt (15)
  • Terminal (140)
  • Terminal Block (2)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Thin Wall Heat Shrink Tube (9)
  • Thin Wall Shrink Tube (9)
  • Twirl Nut (2)
  • Twirl-Nut, 1/2"-13 Thread, 1/2" Nut (2)
  • Twister Connector (6)
  • Twist-On Wingnut (7)
  • Twist-On Wire Connector (11)
  • Twist-On Wire Nut (5)
  • Two-Way Splice Connector (6)
  • Universal End Stop (2)
  • Wall Driller Anchor Kit (3)
  • Warrior Wrap General Use Vinyl Electrical Tape 7MIL .75 In X (11)
  • Warrior Wrap High Voltage 69KV Linerless Rubber Splicing Tap (2)
  • Warrior Wrap Professional Plus Vinyl Electrical Tape 7MIL .7 (11)
  • Warrior Wrap Professional Vinyl Electrical Tape 7MIL .75 In (10)
  • Wedge Anchor (8)
  • Wedge Clamp (3)
  • Wing Wire Connector (6)
  • Winged Wire Connector (10)
  • Wire Connector (6)
  • Wire Marker Book (10)
  • Wire Marker Booklet (4)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (5)
  • Wire Marker Kit (2)
  • Wire Marking Sleeve (2)
  • Wire Twist Connector (3)
  • Z" Purl" Hanger, 1/4" Threaded Rod (2)
  • Zamac Anchor (4)
  • Show More...

• Brand

  

  • 3M (4)
  • 3M Electrical Products (90)
  • ABB (21)
  • Abb Installation Products, Inc (2)
  • ARLINGTON (2)
  • Arlington Industries (2)
  • AUSTIN BOLT (2)
  • Blackburn Grounding (11)
  • Blackburn Mechanical (52)
  • BRADY (5)
  • Brady® (60)
  • Bridgeport (2)
  • BRISCON (2)
  • Buchanan (20)
  • BURNDY (355)
  • Burndy-US, a Hubbell affiliate (3)
  • CALBRITE (7)
  • Catamount (32)
  • COLOR-KEYED (45)
  • Deltec (2)
  • Dottie (2)
  • Easy-Twist (2)
  • Eaton (141)
  • Eaton Corp (4)
  • EATON CUTLER-HAMMER (24)
  • Erico, Inc. Eritec-Caddy (11)
  • EZ-Code (15)
  • FASTENERS, INC. (4)
  • Gardner Bender (27)
  • Highland (12)
  • Ideal (85)
  • Ideal Industries (2)
  • Ilsco (20)
  • Klein Tools (4)
  • L.H. Dottie CO. (18)
  • LH DOTTIE (276)
  • Minnesota Mining (3M) (49)
  • NSi (2)
  • Nsi Industries (220)
  • nVent CADDY (68)
  • nVent ERICO (6)
  • Performance Plus (2)
  • Rack-A-Tiers (3)
  • Scotchcast (2)
  • ScotchCode (4)
  • Scotchlok (40)
  • Selecta Products (4)
  • Shrink-Kon (2)
  • Southwire (3)
  • Sta-Kon (74)
  • T&B Elec Suppl (2)
  • T&B Ind Fitting (6)
  • Tartan (2)
  • Thomas & Betts (2)
  • Ty-Rap (72)
  • WarriorWrap (39)
  • Show More...

• Sub Brand

  

  • 3M(R) (6)
  • 3M(TM) (21)
  • Blackburn (41)
  • Burndy (30)
  • CADDY (76)
  • Color-Keyed (18)
  • Easy-Twist(TM) (17)
  • Entrelec (9)
  • ERICO (4)
  • E-Z-CODE ID (4)
  • Greenie(R) (2)
  • Highland(TM) (14)
  • Ideal (7)
  • In-Sure(R) (7)
  • L.H. Dottie CO (2)
  • NSI (12)
  • Polaris Black (15)
  • Polaris Edge (2)
  • Polaris Gray (5)
  • POLARIS(TM) (6)
  • Scotchlok(TM) (3)
  • Split Bolts (6)
  • Sta-Kon (23)
  • T&B (6)
  • Twister(R) (7)
  • Ty-Rap (6)
  • Wing-Nut(R) (7)
  • Wire-Nut(R) (6)
  • WireTwist(TM) (3)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (3)
  • #12 AWG (22)
  • #14 AWG (11)
  • #14 AWG (Stranded) (7)
  • #16 AWG (10)
  • #2 AWG (Stranded) (2)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (4)
  • #4 AWG (4)
  • #4 AWG (Stranded) (3)
  • #6 AWG (18)
  • #6 AWG (Stranded) (12)
  • #8 AWG (2)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #14 AWG (3)
  • (2) #16 AWG (2)
  • (2) #18 AWG (8)
  • (2) #22 AWG (2)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #22 AWG (2)
  • 250 MCM (3)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (4)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #10 AWG (20)
  • #14 AWG (10)
  • #18 AWG (2)
  • #2 AWG (2)
  • #2 AWG (Stranded) (4)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (6)
  • #4 AWG (Stranded) (2)
  • #6 AWG (9)
  • #6 AWG (Stranded) (4)
  • #8 AWG (7)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #14 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (2)
  • (3) #16 AWG (2)
  • (4) #12 AWG (4)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (6)
  • 1/0 AWG (8)
  • 1/0 AWG (Stranded) (3)
  • 2/0 AWG (4)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (2)
  • 250 kcmil (Stranded) (2)
  • 250 MCM (4)
  • 3/0 AWG (6)
  • 300 kcmil (2)
  • 350 kcmil (4)
  • 350 MCM (5)
  • 500 MCM (3)
  • 600 kcmil (3)
  • 750 MCM (2)
  • Show More...

• Insulation Material

  

  • EPDM Rubber (3)
  • Nylon (5)
  • Plastisol (26)
  • Thermoplastic (17)
  • Vinyl (33)
  • Show More...

• Conductor Material

  

  • Aluminum (14)
  • Aluminum;Copper (13)
  • Brass with Copper Sleeve (2)
  • Copper (120)
  • Copper/Aluminum (5)
  • Copper;Aluminum (29)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (4)
  • High Copper Alloy (6)
  • Steel (3)
  • Show More...

• Insulation Color

  

  • Black (24)
  • Blue (22)
  • Blue (Die Color) (3)
  • Brown (2)
  • Brown (Die Color) (2)
  • Gray (12)
  • Gray (Die Color) (2)
  • Green (4)
  • Green (Die Color) (2)
  • Metallic Silver (2)
  • Orange (9)
  • Purple (4)
  • Red (20)
  • Red (Die Color) (4)
  • Red/Yellow (3)
  • Silver (2)
  • Tan (5)
  • Tan/Red (2)
  • Tan/Yellow (2)
  • Yellow (30)
  • Show More...

• Voltage Rating

  

  • 1000 V (4)
  • 300 (4)
  • 300 V (15)
  • 35 (131)
  • 35 kV (34)
  • 500 W (2)
  • 600 (59)
  • 600 V (252)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (7)
  • 600 V ac (13)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (11)
  • 600V (5)
  • Show More...

• Number Of Conductors

  

  • 1 (67)
  • 2 (66)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 3 (19)
  • 4 (12)
  • 5 (3)
  • 6 (5)
  • 8 (2)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - 5/16 Mounting Hole (2)
  • # 8 AWG (STR) - 3/8 Mounting Hole (2)
  • .472 OD-.354 ID - .354-2.56 Bundle Range (2)
  • 1,000V Maximum In Fixtures And Signs;Better Grip And More Leverage For Faster Connections With Less Effort;Comfortable Swept Wings Designed To Help Reduce Hand Fatigue;Comply With Federal Specification W-S-610E;Expanding Square-Wire Spring Provides A Secure Connection Every Time;Features: The Widest Red/Tan Wire Range In The Industry;Min. 2 #18 To Max. 4 #10;Model Number: 344;Suregrip Overmolding Provides Better Grip For Improved Leverage And More Torque;Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 D (2)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT54;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (2)
  • 3m Clear Tubing Fp-301 Provides Excellent Visibility For Component Packing;Split Resistant (9)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 4/0 AWG (STR) - 3/8 Mounting Hole (2)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (22)
  • Accepts (2) 14 To (4) 10 AWG MC/AC Cable, 5/16 In and 3/8 In Flexible Conduit (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 1-3/4 IN;Vinyl-Impregnated Cloth Construction Provid (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 3/4 IN;Vinyl-Impregnated Cloth Construction Provides (4)
  • Adhesive Lined Flexible Pilyolefin (3)
  • Adjustable mud ring accommodates various thicknesses of drywall. Can be adjusted after the installation of drywall (2)
  • Aggressive Adhesive;Harsh Environment;Heat Resistant;Permanent Adhesive (5)
  • Aggressive Adhesive;Harsh Environment;Outdoor Durable;Permanent Adhesive (9)
  • Aggressive Adhesive;Low Temperature;Permanent Adhesive (3)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Allows Conduit To Clear Drop Wires (2)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (3)
  • Barrel Style Butted (4)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (6)
  • Bolt and pressure bar of copper alloy, completely tin plated for corrosion resistance. Contoured spacer of electrolytic copper (3)
  • Bright, colorful signs identify potentially hazardous work areas;Protected graphics for indoor and outdoor use;Resistant to both chemicals and abrasion (2)
  • Choose from a variety of marking area sizes. Clear area covers print legend for extra protection (3)
  • Clear Plastisol covered AL6061-T6 aluminum body, Clear Plastisol (2)
  • CLIP,CONDUIT, (4)
  • Constructional Feature Abrasion Resistant;Standard Package 1 (4)
  • Convenient Pocket-Size Booklets;Plastic-Impregnated Cloth Construction for Long-Lasting Durability;Resists Abrasion, Moisture, Dirt and Oil;Perforated 1-1/2 in Markers can be Separated into Half-Length Sizes;Self-Sticking on Wire and Cable;For Above Ground;Below Ground (2)
  • Degree of protection: IP20 (3)
  • Designed for Making Ground Connections and Bonding Non-Metallic Sheathed Cable (2)
  • Detectable by metal detectors, X-ray equipment, or visual detection (6)
  • Drop wire may be cut to exact length for adjustments in drop wire sag. Can be attached to bare neutral at any point in the span. Flexible and rigid bails grip ACSR, AAC and AAAC Conductors (3)
  • Easy Entry Copper Insulation Sleeve (5)
  • Easy Installation - no special tools required (5)
  • Easy Installation;No Special Tools Required (15)
  • Electro-Tin Plated (3)
  • Eliminates errors in premounting the base with respect to its orientation to wire bundle direction (6)
  • Especially Suited for use with Flexible Metallic Conduit (13)
  • Excellent Adhesion and Elasticity, All Weather Performance, High Tensile Strength, Resistant to UV, Abrasion and Corrosion, Flae-Retardant. (10)
  • Excellent for Continuous Loop Grounding and Bonding (2)
  • Exceptional Wire-Range Capacity Three Models Handle Wire Combinations From as Small as 22 AWG to as Large as 6 AWG (4)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (2)
  • Features: 12 Gauge Wire (4)
  • Features: All Splicer/Reducers Are Dual Rated For Use With Aluminum And Copper Conductors And Are Constructed From High Strength, Tin Plated Aluminum, PENTROX Oxide Inhibiting Joint Compounds Are Recommended For All Aluminum Applications, All Connectors Are Tin-Plated: Provide Low Contact Resistance And Prevents Galvanic Corrosion, Connectors Feature Rounded Bottoms: Facilitates Taping, Solid Center Barrier: Prevents Contact Of Dissimilar Metals, Large Screw Diameters: Ensures Greater Surface Contact With (3)
  • Features: All-Aluminum Electro-Tin Plated design eliminates possible bi-metallic corrosion and provides shortest connector length design possible for easy installation in equipment with limited space. Solid electro-tin plated aluminum plug makes properly connection easily. Smooth surface on the solic EC plug provides greater area contact establishing excellent conductivity. Solid plug has equivalent cross-sectional area as current carrying equivalent copper wire permitting use of larger aluminum wire to co (2)
  • Features: An Irreversible Compression Ground Grid Cross Connector Which Allows Adjustment Of The Compression Elements Prior To Installation, Only Six Connectors And Four Dies Are Required To Install All Combinations From 6 AWG Solid Through 500 KCMIL, UL467 Listed Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Dimensions In Brackets Represent Lightning Protection Conductors, Die Index: 997 Element A, 997 Element B, Conductor Type: Run: Commercial Stra (2)
  • Features: Any Head Style Screw can be Used (5)
  • Features: Better Shear Resistance than Plastic Pin, Zamac Alloy with Carbon Steel Screw Drive, Fast and Easy to Install (5)
  • Features: Chip Resistant (2)
  • Features: Clear Plastisol covered AL6061-T6 aluminum body, Saves time, lowers installation costs, eliminates taping, Oxide inhibitor pre-installed, Inhibits moisture and contaminants from entering the contact area (4)
  • Features: Clear Plastisol Covered Al6061-T6 Aluminum Body: Saves Time, Lowers Installation Costs, Eliminates Taping, Clear Plastisol: Allows Visual Confirmation That Conductor Is Properly Inserted, Oxide Inhibitor Pre-Installed: Inhibits Moisture And Contaminants From Entering The Contact Area, Range-Taking: Reduces Number Of Connectors Carried In Inventory, In-Line Splice/Reductions Are Made Quickly And Easily With The Unitap Line Of Connectors, UL486B Listed, Dual-Rated AL9CU For Any Stranded Copper Or S (2)
  • Features: Continuous Thread Allows for Take up Adjustment, Machine Bolt (17)
  • Features: Convenient Pocket-Size Booklets; Plastic-Impregnated Cloth Construction For Long-Lasting Durability; Resists Abrasion, Moisture, Dirt And Oil; Perforated 1-1/2 IN Markers Can Be Separated Into Half-Length Sizes; Self-Sticking On Wire And Cable; Non-Smear Black Legend Ensures High Visibility; For Applications Above Or Below Ground; Ten Pages Per Booklet, 10 Markers Per Legend; Adhesion: 45 OZ/IN Width Ultimate; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Corrosion and Chemical Resistant (6)
  • Features: Corrosion Resistant, Stainless can be Mildly Magnetic (2)
  • Features: Direct Burial Rated; Heavy-Wall Heat Shrinkable Tubing - TS-46 Irradiated Cross-Linked Polyolefin With 3:1 Standard Shrink Ratio; Adhesive Liner Provides Complete Insulation And Protection; Simple One-Piece Design Saves Time And Money (2)
  • Features: Drive Pins are Installed with a Stud Driver (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: Easy to Spot, Reusable, Deep Threads (6)
  • Features: Flat Hangar Screws, Tool Not Included, TK - with Drill Pt, Flat Hangar Tool w/ Safety Sleeve, Heavy Duty Steel Construction, Installs Hanger Screws Quickly (2)
  • Features: For Proper Installation of Drop in Anchors (3)
  • Features: Grade 5 Medium Strength (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 4 - 4-1/2 IN, Tube (ips) Size: 4 IN, Installation Torque: 240 IN-LB, Height: 6-3/8 IN, Width: 5-7/8 IN (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Height: 3-1/2 IN, Ground Rod Size: 1-3/8 - 1-1/2 IN, Tube (ips) Size: 1-1/4 IN, Installation Torque: 240 IN-LB, Width: 3 IN, Rebar (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Two Parallel Cables To Rod Or Pipe, Especially Good For Grounding Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts, And Lockwashers Make The GD Suitable For Burial In Ground Or Concrete, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Raised Floor: No, Ground Rod Size: 2 - 2-3/8 IN, Tube (ips) Size: 2 IN, Width: 3-3/4 IN, Installation Torque: 240 IN-LB, Height: 4-3/8 IN (2)
  • Features: HYLUG Type YAV Is A Seamless, Heavy Duty Uninsulated Compression Terminal Manufactured From Electrolytic Copper And Is For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, The Seamless Tubing Produces A Double Thick Tongue And Seamless Barrel Design Provides A Strong Connector For Demanding Applications Requiring High Reliability, Applications Include Aircraft, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To V (4)
  • Features: Includes Drill, Hex Head Slotted (7)
  • Features: Includes Hex Nut (5)
  • Features: Invincibox Up to 2 Inch (6)
  • Features: Invincibox Up to 2 Inch, Tuff Pack (2)
  • Features: Invincibox upto 2 Inch (39)
  • Features: Invincibox upto 2 Inch, Tuff Pack (5)
  • Features: Irreversible Compression Ground Tap Figure 6 Can Be Used As A Tap Connector Or As A Tap Splice Connector, Four Die Sets And Eight Connectors Can Accommodate A Conductor Range From #8 AWG Solid Through 500 KCMIL Plus 1/2 , 5/8 And 3/4 IN Copper Bonded Ground Rods, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y750, PAT750-18V Tool, PU998 Die, (1), Y45 Tool, PU998 D (2)
  • Features: Irreversible Compression Ground Tap Figure C Connectors, Accommodates All Cable Combinations From #6 AWG Solid Through 500 KCMIL, C- Shaped Opening Permits Placing Two Continuous Parallel Cables Into Conductor Groove, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Prefilled With PENETROX Compound And Strip Sealed, Certain Sizes Are Also UL467 Listed And CSA Certified For Wire To Ground Rod, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y35, Y39, Y750, PAT750 To (4)
  • Features: Lag Screws are used in Woodworking when Standard Wood Screws are too Short or too Small (24)
  • Features: Lock Washers Provide Tight Locking of Screws and Bolts, Invincibox Up to 2 IN (6)
  • Features: Lock Washers Provide Tight Locking of Screws and Bolts, Silicon Bronze is High Resistance to Extreme Temperatures, Invincibox Up to 2 IN (2)
  • Features: Lock Washers Provide Tight Locking of Screws and Bolts, Stainless Steel is Corrosion and Chemical Resistant, Invincibox Up to 2 IN (3)
  • Features: Made Of Tin-Plated Cast Copper Alloy, It Accommodates Either One Or Two Conductors, Copper Or Aluminum Cable, In Addition To A Low Profile Head With A Deep Phillips Recess, The Galvanized Steel Bolt Has A Ribbed Neck Which Prevents Rotation During Installation When Installed In A 0.44 Diameter Hole, When Used On Aluminum Conductor, The Cable Must Be Scratch Brushed And PENETROX A Joint Compound Must Be Used On Cable And Connector, UL467 Listed For Copper Conductor Only, Suitable For Direct Burial (3)
  • Features: Manufactured with Filtered Nylon 6/6, Angled Tail, One Piece Design, Transition Rails, And 3 Tooth Pawl, Rounded Edges, Finger Grips, Bulk Available (2)
  • Features: Medium Duty, Any Head Style Screw can be Used, The Screw can be Easily Removed or Loosened and Retightened (2)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch (3)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch, Tuff Pack (3)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Features: Nylon 6/6 Standard, Available In Black And Natural, One Piece Injection Molded, Maximum Strength And Adjustability For Versatility, Chemically Resistant To Solvents, Oils, Grease, And Diluted Acids, Rounded Edges And Bent Tip For Easy Installation, Self-Locking, Installation Tool: TWT1, MK7 Tool (2)
  • Features: Partial Thread, 120000 PSI Tensile, Grade 5 (7)
  • Features: Phillips Socket Driver with One #2 & One #3 Phillips Bit, 1/4 IN Hex Socket Driver, 5/16 IN Hex Socket Driver & Allen Wrench (2)
  • Features: Provides a Large Load Bearing Surface (18)
  • Features: Range-Taking Connector: Lowers Inventory Requirements, Compact Size: Easy To Tape And Insulate Connection, Manufactured From High Conductivity Wrought Copper: Provides Low Resistance And Excellent Electrical Conductivity, Economical: Provides Low Installed Cost, 8A - Use CRIMPITS Accommodating 6 Stranded Copper, 6A - Use CRIMPITS Accommodating 4 Stranded Copper, 4A - Use CRIMPITS Accommodating 2 Stranded Copper, 2A - Use CRIMPITS Accommodating 1/0 And 2/0 Copper, Use PUADP-1 Adapter When Using U (3)
  • Features: Reusable Six Compartment Box, Handy Assortment (6)
  • Features: Self-Sticking On Wire And Cable; Perforated 1/4 IN X 1-1/2 IN Markers; For Applications Above Or Below Ground; Resists Abrasion, Moisture, Dirt And Oil; Non-Smear Black Legend Ensures High Visibility; 10 Pages Per Booklet; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Silicon Bronze Harder than Brass used in Direct Burial (3)
  • Features: Silicon Bronze Harder than Brass, Marine use and High Resistance to Extreme Temperatures (4)
  • Features: The INSULUG Type YAEV Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Term (3)
  • Features: The INSULUG Type YAEV-L Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Te (2)
  • Features: The Type SP VINYLINK Is A PVC Insulated Seamless Butt Splice, Type SP VINYLINK Is Designed To Accommodate A Broad Range Of 600 Volt Cables, Manufactured From Seamless Electrolytic Copper Tubing: Provides Maximum Conductivity And Tensile Strength, In A High Quality Design With NO Seams To Split, Funnel Entry: Provides Easy Wire Insertion, Electro-Tin Plated: Provides Durable Long Lasting Resistance To Corrosion, Expanded Insulation Support: Lower Inventory Requirements, Red Wire Range Of 22-16: Lo (3)
  • Features: Tin-Plated, High Strength Copper Alloy SERVIT With Spacer, Spacer Separates Dissimilar Conductors And Provides Long Contact Length That Prevents High Pressure Point Contacts Between Run And Tap Conductors, Use Of PENETROX Joint Compound Recommended With Aluminum And ACSR, Conductor Type: Run: ACSR, 5005, AAAC, Commercial Stranded Aluminum, Commercial Stranded And Solid Copper, Tap: ACSR, 5005, AAAC, Commercial Stranded Aluminum, Commercial Stranded And Solid Copper, Steel (Nominal Diameter), Inst (6)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Features: UL Listed 90 DEG C, 600 V To 35 KV 45 DEG, 90 DEG Angles Are Available, Tools, Die Set Catalog Number, And (number Of Crimps): MD6, OUR840, MD7-34R Mechanical: W26VT (2), W26RT (2), X26RT (2),BCT500HS, Y500CTHS Hydraulic: W26VT (2),W26RT (2), X25RT (2), X26RT (2), Y35, Y39, Y750, Y46, PAT750 Hydraulic:U26RT (1), Dieless: MY29-3 (1), MY29-11 (1), MRC840 (2), Y644HS (1), Y81KFT (1), Y81KFTMBH (1), PAT81KFT-18V (1), Wire Strip Length: 1 IN, Conductor Type: Commercial Stranded Copper, Tongue Angle: S (2)
  • Features: Unique, One-Step Drive Anchor, Zamac Alloy with Carbon Steel Screw Drive, Removable Screw (4)
  • Features: Use With Wider Cable Such As ROMEX, NM And UF; Smooth Plastic Saddle Prevents Damage To Cable; Zinc-Plated Nails Resist Rust And Corrosion; Finish: Zinc-Plated Nails; Nail Type: Standard (2)
  • Features: Used for Suspending Fixtures (2)
  • Features: Used to Grounding Pigtails (3)
  • Features: Wedge Anchors can be Installed through the Fixture, Full Thread (11)
  • Features: Wood Rocket, Invincibox Up to 2 Inch (7)
  • Features: Wood Rocket, Invincibox Up to 2 Inch, Tuff Pack (5)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Finished hex nuts are heavier (thicker) and are furnished in sizes 1/4 IN and up;Invincibox up to 1/2 IN;Zinc plated - general use (6)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (4)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (17)
  • Fixed;Square-Wire Spring Creates its Own Threads Maintains a Secure Positive Grip That Will Not Relax Over Time (6)
  • Flame Retardant (10)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (6)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (6)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 15 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 25 Lb (3)
  • Flange Thickness 5/16 To 1/2 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (2)
  • Flange Thickness 5/16 To 1/2 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • Flexible, Polyolefin (17)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For Cross Connections in The Bridge Shaft (3)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (8)
  • Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams (3)
  • Good Adhesion to Most Fiberboard Surfaces and a Variety of Plastic and Metal Surfaces;For Light-Duty Strapping;Bundling;Reinforcing (2)
  • Good Ahesion and Elasticity, All Weather Performance, Great Tensile Strength, Resistant Tto UV, Abrasion and Corrosion, Falme-Retardant. (11)
  • Heat Shrink (15)
  • Heavy-Wall Cable Sleeve;For Electrical Splices;Connections;For Indoor, Outdoor or Overhead Use;Direct Buried or Submersible;Insulating Secondary Splices;Relocation of Service;Dig-In Repairs;Sheath Repairs (8)
  • Helps prevent mistakes and trial and error searching during electrical service work (3)
  • Helps reduce drop wires by up to 66% (2)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (11)
  • Hex machine screw nuts are for screws smaller than 1/4 IN diameter;Invincibox up to 1/2 IN;Zinc plated - general use (4)
  • High Strength Solderless Service Connector (4)
  • Horizontal markings (3)
  • In butt splices, the wires are butted together and crimped at each end of the splice. These splices are color-coded according to wire size (3)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (2)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Installs with standard wrenches (3)
  • Invincibox up to 1/2 IN;Steel - general use (6)
  • Large Print (3)
  • Lead free ; Weather resistant ; Fade resistant (2)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (12)
  • Long Barrel;High Conductivity (7)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (50)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made of High Copper Alloy;Re-usable (3)
  • Made with Vinyl Impregnated Cloth, strong adhesive ensures marking will last (7)
  • Material Flame Retardant Polypropylene (3)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations (10)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (7)
  • Nylon Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • One-piece molding - no lost parts (2)
  • Perfect for coaxial, fiber optic and all other communication and electrical conducting cables (2)
  • Perfect for protection of bundles from .063 to 7 inch diameters (3)
  • Permanent Adhesive (2)
  • Pocket pack wire marker books are easy to carry and easy to use. The material is an all-purpose vinyl coated cloth tape exclusively designed to resist abrasion, oil, water, and dirt (4)
  • Pocket Pack Wire Marker Books are Easy to Carry and Easy to Use;The Material is an All-Purpose Vinyl Coated Cloth Tape Exclusively Designed to Resist Abrasion, Oil, Water, and Dirt (4)
  • Pre-printed (12)
  • Quick, reliable method of connection to terminal blocks and boards without the use of tools. Unique construction of the female disconnect offers long-term dependability (2)
  • Rigid (2)
  • Robust spring design for high performance holding power (6)
  • Scratch-Resistant;Solvent-Resistant (2)
  • SCREW GUN BRACKET,16 IN STUD SPACE (2)
  • Self Laminating & Wrap Around (8)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Self-Sticking on Wire and Cable;For applications above or below ground;Resists Abrasion, Moisture, Dirt and Oil;Non-smear Black Legend Ensures High Visibility;For Above Ground;Below Ground (2)
  • Specially Designed Contour Wings Provide a Secure Grip for Extra Levarage (7)
  • Specifically Created For The Residential Markets;The T/R+ Replaces The Yellow;Tan and Red Connectors In The Majority Of Field Applications (2)
  • Split-Bolt Has Free-Running Threads and Easy to Grip Wrench Flats;Highly Resistant to Season Cracking and Corrosion;High Strength (5)
  • Standard Barrel;High Conductivity (10)
  • Static Load Capacity 100 Lb (4)
  • Static Load Capacity 160 Lb (4)
  • Static Load Capacity 160 Lb, Flange Thickness 1/8 To 1/4 In, With Thread Impression (2)
  • Static Load Capacity 25 Lb (3)
  • Suitable to Mark Electrical Wires and Terminal Strips Quickly (4)
  • Superior Adhesion and Elasticity, Extreme Weather Performance, Excellent Tensile Strength, Highly Resistant to UV, Abrasion and Corrosion. (12)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (9)
  • These fork terminals have extra-long PVC insulation sleeve for protection and stress relief at wires flex point. Brazed seam barrel is serrated for high pull-out value. Insulation is color-coded (3)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (2)
  • These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wires flex point. Brazed seam barrel is serrated to obtain high pull-out value (6)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (4)
  • Thickness 1/4 In, Weight 11.6 Lb per 100 (2)
  • Thickness 1/4 In, Weight 11.9 Lb per 100 (2)
  • Thickness 3/8 In, Weight 9.3 Lb per 100 (2)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Two Breakouts (3)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (15)
  • UL Listed 90 DEG C, 600 V - 35 KV,Tongue Angle: Straight (7)
  • Unique construction of the female disconnect offers long-term dependability. Brazed seam serrated barrel provides maximum tensile strength (7)
  • Uniquely designed pressure bar and notched v-bottom collar provide vise-like grip between conductor and terminal (2)
  • Universal terminal, These dual-rated panelboard lugs are constructed from high strength extruded aluminum alloy and electro tin-plated to provide low contact resistance (3)
  • Vertical markings (4)
  • Vinyl Insulated Ring Terminal 22-18 AWG - 100 Pack (3)
  • Vinyl Insulated Ring Terminal 8 AWG - 250 Pack (2)
  • Width 1-5/8 In, Bolt Size 1/2 In (3)
  • Width 1-5/8 In, Bolt Size 3/8 In (4)
  • Without Spring, Thickness 1/2 In, Weight 11.6 Lb per 100 (3)
  • Without Spring, Thickness 3/8 In, Weight 9.3 Lb per 100 (3)
  • Write-on (2)
  • Show More...

• Overall Length

  

  • 0.780 in (5)
  • 0.87 in;22.098 mm (2)
  • 0.899 in (2)
  • 0.986 in (2)
  • 1 in (3)
  • 1 in;25.4 mm (2)
  • 1.03 in (2)
  • 1.06 in (2)
  • 1.09 in (3)
  • 1.12 in (2)
  • 1.13 in (3)
  • 1.153 in (2)
  • 1.16 in (4)
  • 1.31 in (2)
  • 1.47 in;37 mm (2)
  • 1.50 in (3)
  • 1.54 in (2)
  • 1.75 in (2)
  • 1.913 in (2)
  • 1-1/16 in (2)
  • 1-15/32 in (2)
  • 2 in (2)
  • 2.03 in (2)
  • 2.18 in (2)
  • 2.63 in (2)
  • 3-3/16 in (2)
  • 4 in (2)
  • 4-1/4 in (2)
  • 48 in (2)
  • 5.5" (14 cm) (3)
  • Show More...

• Terminal Type

  

  • Butt Splice (3)
  • Compression (14)
  • Compression;Crimp (9)
  • Crimp (5)
  • Disconnect Terminal (2)
  • Female Disconnecter (3)
  • Fork Terminal (11)
  • Insulation Displacement Connector (3)
  • Ring Terminal (7)
  • Ring Tongue (6)
  • Screw (34)
  • Splice Connector (3)
  • Split (18)
  • Tongue (10)
  • Twist-On (11)
  • Winged (10)
  • Wire Terminal Disconnect (2)
  • Show More...

• For Use With

  

  • 35 mm Rail (3)
  • Acoustical;Ceiling and Partitioning;Datacom and Low Voltage;Electrical;Fire Sprinkler;HVAC;Plumbing and Refrigeration (2)
  • Air Handling Space (4)
  • Air Handling Space;Outdoor (5)
  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • All Aluminum Applications (2)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (11)
  • Brick;Concrete (2)
  • Bricks (2)
  • Concrete;Block;Brick;Stone;Light Duty Work (3)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (2)
  • Copper and Aluminum Conductor (12)
  • Copper Cables;Aluminum Cables (5)
  • Copper Conductor (17)
  • Copper Wire (3)
  • Datacom and Low Voltage;Electrical (5)
  • Datacom and Low Voltage;Electrical;HVAC;Plumbing and Refrigeration (3)
  • Direct Burial Applications in Earth or Concrete (2)
  • Electrical (2)
  • Fasteners;Beam Fasteners;Boxes;Fixtures (2)
  • Fasteners;Conduit Fasteners (8)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Greater than 2000 Volts Consult Cable (3)
  • Hydraulic Tool (9)
  • Poured Concrete;Prestressed Concrete;Cinder Block;Brick;Mortar (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (6)
  • Terminate;Splice;Tap Power Connectors (8)
  • Wire Termination (13)
  • Wire Termination;Copper and Aluminum Cable (6)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Wireless Network: Infrastructure Accessories (2)
  • Show More...

• Maximum Voltage Rating

  

  • 300 V (5)
  • 35 kV (24)
  • 600 V (69)
  • 600 V (Building Wire);1000 V (Maximum Signs/Lighting Fixture) (8)
  • 600 V ac (59)
  • 600 V;1000 V (Lighting Fixture/Luminaries/Sign) (5)
  • Show More...

• Application

  

  • "Moisture sealing and physical protection for cables, pipes or other cylindrical objects" (4)
  • Acoustical, Ceiling and Partitioning; Electrical Fixing and Fastening (3)
  • Applications certified to 600 V and recommended up to 35 kV¥ (15)
  • Asset Tracking;Barcode Labeling;Circuit Board Labeling;Component and Equipment Labeling;Data and Telecommunications Labeling;General Identification;Inventory and Inspection Labeling (3)
  • Asset Tracking;Barcode Labeling;Circuit Board Labeling;Component and Equipment Labeling;Electrical Labeling;General Identification;Inventory and Inspection Labeling;Solar Panel Labeling;Warehouse Marking (2)
  • Barcode Labeling;Electrical Labeling;General Identification (2)
  • Brick, Concrete (2)
  • Brick, Concrete, Mortar, Wood (24)
  • Bricks (5)
  • Cable and Wire Marking, General and Industrial Identification, Laboratory Identification, Panel Labeling, Voice and Data Identification (3)
  • Clear Insulated Multiple Tap Connectors (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (26)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (31)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (7)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (4)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - O (2)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (22)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (7)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (10)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketGeneration - Renewable Energy - Alternative EnergyInd Facilities & Factories - Industrial Facilities/Factories - OtherOther IT and Datacom - Other InfrastructuresWater and Wastewater Systems - Water and Wastewater Systems - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherGeneration - Conventional Energy - Conventional EnergyDatacenters - IT Space: (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (6)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (3)
  • Component and Equipment Labeling;Data and Telecommunications Labeling;Electrical Labeling;General Identification;Wire and Cable Labeling (3)
  • Component and Equipment Labeling;Electrical Labeling;Facility Identification;Floor Marking;Lean and 5S Labeling;Pipe and Valve Marking;Warehouse Marking (9)
  • Concrete, Block, Brick, Stone (4)
  • Concrete, Block, Brick, Stone, Light Duty Work (5)
  • Construction;Industrial;Military (9)
  • Data and Telecommunications Labeling;Electrical Labeling;General Identification;Wire and Cable Labeling (4)
  • Datacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketDatacenters - Datacenters - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherIn (2)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (22)
  • Datacom and Low Voltage; HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening (3)
  • Datacom and Low Voltage;Electrical Fixing and Fastening (4)
  • Dead-End Self-supporting Drop Wire (3)
  • Drywall, Concrete, Brick, Block (3)
  • Drywall, Particle Board, Wood (12)
  • Drywall, Wood, Aluminum (8)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (7)
  • Electrical (14)
  • Electrical Fixing and Fastening (5)
  • Electrical Fixing and Fastening; Acoustical, Ceiling and Partitioning (5)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (16)
  • Electrical Fixing and Fastening; HVAC, Plumbing and Refrigeration; Datacom and Low Voltage (2)
  • Electrical Labeling;Wire and Cable Labeling (15)
  • Fastens to surface with a hammer. (2)
  • For Accommodating A Broad Range Of 600 Volt Cables (3)
  • For All Combinations Of Copper, Aluminum, ACSR, AAAC, 5005, And Steel (9)
  • For Aluminum And Copper Conductors (19)
  • For Buchanan C24 Crimp Tool And Designed For Fast, Permanent, Pressure-Type Connections (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (10)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (6)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (7)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (6)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (3)
  • For Direct Burial Applications In Earth Or Concrete, Copper (7)
  • For Direct Burial Cables (15)
  • For Direct Burial In Earth And Concrete (10)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (7)
  • For General Purpose (2)
  • For Grounding And Bonding Applications (4)
  • For high temperature applications over 105 degree C (2)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (4)
  • For Indoor And Outdoor Use (2)
  • For Indoor Use Only (2)
  • For Indoor Use Only, Copper Or Stranded Aluminum (5)
  • For Joining A Range Of Cable To Copper Clad, Galvanized Steel, And Stainless Steel Ground Rods, Direct Burial Applications In Earth And Concrete (3)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (21)
  • For Joining A Range Of Parallel Copper Cables Perpendicular To Rod, Pipe Or Column, Direct Burial In Earth Or Concrete (2)
  • For Joining A Range Of Two Parallel Copper Cables To Rod Or Pipe And Burial In Ground Or Concrete (4)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (3)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Joining Three Equal Copper Cables To Rod Or Tube, Direct Burial In Earth Or Concrete (2)
  • For Making Tap Or Parallel Copper Connections (3)
  • For quickly connecting or disconnecting a terminal (3)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (2)
  • For Use With Copper And Aluminum Conductors (5)
  • For use with SNK terminal blocks (2)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (26)
  • For Used To Write On Cardboard, Concrete, Lumber (Rough Or Smooth), Metal, Paper And Plastic (2)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • Framing, Electrical, Plumbing and Sheet Metal Applications (6)
  • General Purpose (50)
  • General Use (2)
  • Generation - Renewable Energy - Alternative EnergyDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherDatacenters - Datacenters - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyUtilityCommercia (2)
  • Generation - Renewable Energy - Alternative EnergyGeneration - Conventional Energy - Conventional EnergyInd Facilities & Factories - Facility - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetWater and Wastewater Systems - Water and Wastewater Systems - OtherDatacenters - Datacenters - OtherOther IT and Datacom - Other InfrastructuresUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketResidential Bldgs & Facilities - Residential Bldgs (2)
  • Grounding and Bonding Applications (7)
  • Grounding and Bonding; Rail Connections (2)
  • Grounding Wire (5)
  • Ideal solution for bundling in harsh outdoor environments (2)
  • Indoor;Outdoor (8)
  • Industrials, Hospitals, Utilities, Marine, Computer (6)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (19)
  • Insulating or Joining 2 or more conductors (19)
  • Light Duty Aluminum and Steel Metal to Metal Applications (2)
  • Light Fixtures (2)
  • Marking Wire and Cable (4)
  • Metal into Concrete (2)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (2)
  • NSI (37)
  • Other (19)
  • Other IT and Datacom - Other InfrastructuresUtilityInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherGeneration - Conventional Energy - Conventional EnergyGeneration - Renewable Energy - Alternative EnergyDatacenters - IT Space: Enterprise / Server Room / Network ClosetWater and W (2)
  • Poured Concrete, Prestressed Concrete, Cinder Block, Brick, Mortar (7)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (5)
  • provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. (3)
  • Provides terminating point for a group of wires running in one direction (4)
  • Residential and commercial wiring jobs (6)
  • Screws, Bolts, General Use (11)
  • Snaps into a Regular Bushing to make a UL Listed Insulated Bushing (12)
  • Splicing Wire (20)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (13)
  • Tap connections and in-line splice/reductions are made quickly and easily with the UNITAP™ line of connectors (2)
  • Terminate, Splice, Tap Power Connectors (60)
  • To be used for marking SNA terminal blocks (8)
  • type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire (2)
  • Used to position the grounding plate on a threaded rod prior to placement of the concrete. (2)
  • Utility Identification (11)
  • UtilityOther IT and Datacom - Other InfrastructuresGeneration - Renewable Energy - Alternative EnergyDatacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherGeneration - Conventional Energy - Conventional EnergyCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - Datacenters - OtherCommercial (2)
  • Wall Plates (2)
  • Wire and Cable Labeling (3)
  • Wire Identification (7)
  • Wire Labeling (3)
  • Wire Marking (8)
  • Wire Retainer (3)
  • Wire Splice (28)
  • Wire Termination (209)
  • Show More...

• Package Quantity

  

  • 1 BG;5 CT (4)
  • 1 ct (25)
  • 1 CT;10 PK (5)
  • 1 CT;100 PK (10)
  • 1 CT;12 PK (2)
  • 1 CT;150 PK (2)
  • 1 CT;200 PK (2)
  • 1 CT;25 PK (5)
  • 1 CT;3 PK (3)
  • 1 CT;300 PK (2)
  • 1 CT;5 PK (8)
  • 1 CT;6 Pk (3)
  • 1 Pc (2)
  • 1 PK (2)
  • 1 PK;100 CT (2)
  • 10 CT;100 PK (5)
  • 10 CT;240 PK (4)
  • 10 PK (11)
  • 100 BG (12)
  • 100 BX (34)
  • 100 CT (70)
  • 100 CT;1000 PK (2)
  • 100 CT;600 PK (4)
  • 100 PC (3)
  • 100 PK (21)
  • 100 PK;500 CT (4)
  • 100 PK;600 CT (4)
  • 100 Pouch;1 CT;1000 PK (3)
  • 1000 BX (2)
  • 1000 CA (6)
  • 1000 CT (4)
  • 1000 CT;10000 PK (2)
  • 10000 PK;1000 CT (8)
  • 12 CA (6)
  • 12 CT (7)
  • 12 CT;120 PK (3)
  • 12 PK (2)
  • 15 PK (10)
  • 1800 CT (2)
  • 2 CT (3)
  • 200 CT (2)
  • 200 JR (3)
  • 240 CT (2)
  • 25 BG (13)
  • 25 CA (2)
  • 25 CT (11)
  • 25 CT;250 PK (14)
  • 3 CT (4)
  • 3 CT;30 PK (2)
  • 300 CT;250 PK (2)
  • 300 JR (3)
  • 4 CT (3)
  • 50 BG (2)
  • 50 BX (3)
  • 50 CT (27)
  • 50 CT;250 PK (2)
  • 50 CT;500 PK (11)
  • 50 PK (4)
  • 50 PK;300 CT (5)
  • 500 BG (6)
  • 500 BX (5)
  • 500 CT (4)
  • 500 CT;5000 PK (11)
  • 500 JR (3)
  • 500 PK;50 CT (3)
  • 5000 BC (2)
  • 5000 PK;100 CT (4)
  • 5000 PK;1000 CT (2)
  • 6 CT (11)
  • 6 CT;60 PK (4)
  • 6 PK (2)
  • Show More...

• Weight

  

  • 0.002 lb (2)
  • 0.0025 lb (2)
  • 0.004 lb (5)
  • 0.005 lb (2)
  • 0.006 lb (8)
  • 0.01 (2)
  • 0.01 lb (63)
  • 0.01 LB (Each) (2)
  • 0.01 lb/EA (12)
  • 0.011 lb (2)
  • 0.02 lb (24)
  • 0.02 lb/EA (10)
  • 0.03 lb (12)
  • 0.03 lb/EA (7)
  • 0.04 lb (7)
  • 0.04 lb/EA (3)
  • 0.05 lb (9)
  • 0.05 lb/EA (3)
  • 0.06 lb (5)
  • 0.06 lb/EA (10)
  • 0.07 lb (9)
  • 0.07 lb/EA (4)
  • 0.08 lb (6)
  • 0.08 lb/EA (5)
  • 0.09 lb (11)
  • 0.09 lb/EA (10)
  • 0.1 lb (4)
  • 0.1 lb/EA (7)
  • 0.10 lb/EA (2)
  • 0.11 lb (7)
  • 0.12 lb (3)
  • 0.12 lb/EA (4)
  • 0.13 lb (3)
  • 0.13 lb/EA (12)
  • 0.14 lb/EA (3)
  • 0.15 lb (5)
  • 0.15 lb/EA (4)
  • 0.16 lb (3)
  • 0.16 lb/EA (2)
  • 0.17 lb/EA (5)
  • 0.18 lb (3)
  • 0.19 lb/EA (4)
  • 0.2 lb (3)
  • 0.21 lb (2)
  • 0.22 lb (2)
  • 0.23 lb (2)
  • 0.25 lb/EA (2)
  • 0.26 lb/EA (3)
  • 0.27 lb (2)
  • 0.28 lb (2)
  • 0.28 lb/EA (3)
  • 0.3 lb/EA (3)
  • 0.31 lb/EA (3)
  • 0.32 lb (3)
  • 0.34 lb (3)
  • 0.35 lb (2)
  • 0.36 lb (2)
  • 0.37 lb/EA (2)
  • 0.38 lb (2)
  • 0.41 lb (2)
  • 0.44 lb (3)
  • 0.45 lb (2)
  • 0.46 lb (3)
  • 0.5 lb (3)
  • 0.59 lb/EA (2)
  • 0.62 lb/EA (2)
  • 0.72 lb (2)
  • 0.99 lb (2)
  • 1 lb (6)
  • 1.03 lb (2)
  • 1.05 lb (2)
  • 10 lb (7)
  • 2.1 oz (59 g) (3)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (92)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (43)
  • BOX SUPPORT (36)
  • CABLE & PIPE TRANSITS (9)
  • CADDY (STRAPS ONLY) (30)
  • Comp & Mech Lugs and Butt Splices (332)
  • CONDUIT HANGERS/STAND OFF STRAPS (5)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (2)
  • Datacom Wiring Devices and Accessories (6)
  • DISCONNECTS (2)
  • EXOTHERMIC GROUNDING PRODUCTS (5)
  • FASTENERS (24)
  • FLEX & MC FITTINGS (13)
  • FUSE BLOCKS,FUSE HOLDERS (4)
  • Fuses & Fuse Accessories (3)
  • HAND TOOLS (25)
  • HEAT/COLD SHRINK (89)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (7)
  • MISC FITTINGS (8)
  • Powerdefense Breakers (13)
  • Printers and Labeling (46)
  • SAFETY PRODUCTS (11)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (344)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (92)
  • SPLICE KITS (52)
  • SPLIT BOLTS (131)
  • SPRING NUTS & TWIRL NUTS (11)
  • STEEL BOXES & COVERS (3)
  • T&B C TAP LUGS (28)
  • TAPE (78)
  • TERMINAL BLOCK ACESSORIES (29)
  • TERMINAL BLOCKS POWER DIST BLOCKS (10)
  • TERMINALS (178)
  • THREAD RODS (2)
  • WIRE LUBE, MARKERS, & TIES (119)
  • WIRE NUTS (91)
  • Show More...

• Number Of Pad Holes

  

  • 1 (64)
  • 2 (40)
  • Show More...

• Minimum Qty

  

  • 100 (163)
  • 1000 (14)
  • 15 (4)
  • 150 (4)
  • 200 (4)
  • 25 (8)
  • 250 (7)
  • 300 (3)
  • 40 (2)
  • 50 (73)
  • 500 (31)
  • 75 (4)
  • 750 (2)
  • Show More...

• Material

  

  • Acrylonitrile butadiene styrene (3)
  • Aluminum (102)
  • B-342 Polyolefin (2)
  • B-499 Nylon Cloth (3)
  • Brass (22)
  • Bronze Alloy (7)
  • Bronze Alloy, Leaded (12)
  • Bronze, Leaded, Commercial (12)
  • Carbon Steel (4)
  • Cold Rolled High Carbon Steel (42)
  • Copper (403)
  • COPPER ALLOY (36)
  • Copper Alloy, Cast (12)
  • Copper Sleeves (2)
  • Flame-retardant Polypropelene (30)
  • Flame-retardant polypropelene shell (10)
  • Galvanized Steel (2)
  • Graphite Metallic Steel (8)
  • Heat-shrink Polyolefin (16)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (5)
  • IRON (5)
  • Lead (2)
  • Low Carbon Steel (19)
  • Lumber (2)
  • Nylon (28)
  • Nylon 6/6 (13)
  • Nylon 66 (2)
  • Nylon Cloth (3)
  • Nylon Housing, Copper Alloy Contacts (2)
  • Nylon Insulation (7)
  • Nylon/Polyamide 6.6 (28)
  • Paper (2)
  • Plastic (11)
  • Plastic-Impregnated Cloth (8)
  • Polyamide (20)
  • Polyester (19)
  • Polyethylene (5)
  • Polyolefin (13)
  • Polypropylene (8)
  • Polyvinyl Chloride (2)
  • Porcelain (2)
  • Pre-Galvanized Steel (2)
  • Self-Laminating Vinyl (8)
  • Silicon Bronze (3)
  • Smooth Plastic (3)
  • Spring Steel (2)
  • Stainless Steel (21)
  • Steel (289)
  • Thermoplastic (23)
  • UV Polyethylene (2)
  • Vinyl (48)
  • Vinyl Cloth (6)
  • Vinyl Coated White Cloth (4)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Impregnatted Cloth (7)
  • Vinyl Insulation (7)
  • Vinyl-Impregnated Cloth (7)
  • Zamac Alloy (10)
  • Zinc (6)
  • Show More...

• Finish

  

  • #4 Polished Finish (6)
  • Aluminum (7)
  • Bare (2)
  • Black Oxide (12)
  • Caddy?® Armour (31)
  • CADDY® ARMOUR (4)
  • Ceramic Coated (3)
  • Ceramic Coated Blue (4)
  • COPPER (15)
  • Electro -Tin Plated (8)
  • Electro-galvanized (3)
  • EPDM Rubber Insulated (4)
  • Galvanic/Electrolytic Zinc Plated (9)
  • Galvanized (7)
  • Gloss (19)
  • Graphite Metallic (12)
  • Green (4)
  • Matte (33)
  • nVent CADDY Armour (3)
  • Painted (3)
  • Plain (13)
  • Plastisol Insulated (50)
  • Pre-Galvanized (13)
  • Thermoplastic (28)
  • Tin Plated (74)
  • Tin Plated Copper (6)
  • Tinned (24)
  • Tin-Plated (43)
  • Untreated (3)
  • white (2)
  • Yellow Zinc (8)
  • Yellow Zinc Plated (4)
  • Zinc Phosphate (64)
  • Zinc Plated (189)
  • Zinc-Plated, Tin-Plated Steel Sleeves (2)
  • Show More...

• Wire Type

  

  • ALUMINUM/COPPER (5)
  • B,C,D,K,M,I (7)
  • Class A & B (20)
  • Class B & C (47)
  • COPPER (14)
  • CU Wire Only (20)
  • Solid, Stranded, Stranded (Tin Bonded) (11)
  • Show More...

• Color

  

  • Aluminum (7)
  • Black (89)
  • Black on Clear (3)
  • Black on White (12)
  • Black on Yellow (2)
  • Black Print on White (2)
  • Black, Red on White (2)
  • Blue (61)
  • Bronze (2)
  • Brown (16)
  • Clear (12)
  • Copper (15)
  • Dark Gray (2)
  • Gray (25)
  • Gray 0 (9)
  • Green (22)
  • Grey (8)
  • Ivory (10)
  • Matte Black Finish (2)
  • Metallic (12)
  • Natural (16)
  • Orange (22)
  • Pink (6)
  • Polished Silver (6)
  • Purple (17)
  • Red (75)
  • Red/Tan (3)
  • Silver (9)
  • Stainless (3)
  • Tan (5)
  • Tin Plated Copper (6)
  • Violet (3)
  • White (34)
  • WHITE GLOSS (3)
  • Yellow (76)
  • ZINC PHOSPHATE (2)
  • Show More...

• Color Code

  

  • BLACK (18)
  • BLUE (18)
  • BROWN (21)
  • GRAY (11)
  • GREEN (11)
  • ORANGE (7)
  • PINK (13)
  • PURPLE (7)
  • RED (21)
  • TAN (2)
  • WHITE (9)
  • YELLOW (10)
  • Show More...

• Thread Size

  

  • #10 (14)
  • #10-32 (3)
  • #12 (7)
  • #6 (21)
  • #6-32 (17)
  • #8 (17)
  • #8-32 (2)
  • 1/2 in - 13 (2)
  • 1/2-13 (8)
  • 1/4 (14)
  • 1/4 in - 20 (3)
  • 1/4-20 (12)
  • 3/16 (2)
  • 3/8 (8)
  • 3/8 in - 16 (3)
  • 3/8-16 (15)
  • 5/16-18 (2)
  • Show More...

• Temperature Rating

  

  • 105 C (16)
  • 105 DEG C Shell Rated (11)
  • 105° C (3)
  • 135 °C (2)
  • 150 C (2)
  • 194 (27)
  • 194° F (6)
  • -40 °F - 158 °F (3)
  • -40 F to 250 F (7)
  • -40 To 180 (7)
  • 75 C (4)
  • 90 (3)
  • 90 °C (3)
  • 90 C (21)
  • Show More...

• Diameter

  

  • #10 AWG (11)
  • #12 AWG (3)
  • #6 AWG (18)
  • #8 AWG (12)
  • 0.105 (3)
  • 0.125 (2)
  • 0.187 (2)
  • 0.187 in Diameter as Supplied (5)
  • 0.25 in Diameter as Supplied (2)
  • 0.375 (2)
  • 1/2 (6)
  • 1/2 in (9)
  • 1/2 in (ID) (3)
  • 1/4 (19)
  • 1/4 in (15)
  • 1/4 in (ID) (4)
  • 3/16 (3)
  • 3/8 (17)
  • 3/8 in (7)
  • 3/8 in (ID) (6)
  • Show More...

• Type

  

  • 2-Wire Standard Version (2)
  • Accessory (2)
  • Acoustical Lighting Hangers (2)
  • Adjustable Box Components and Conduit Supports (3)
  • Aluminum Pin Adapters (2)
  • Aluminum Service Wedge Clamp (3)
  • AMS, Dual Rated (5)
  • Anchor Kit (7)
  • Anchor Setting Tool (3)
  • ATR nut (3)
  • Beam fasteners (7)
  • Between Stud Box Mounting Brackets (2)
  • BIBD, Multi-Port (4)
  • BISR, In-Line (2)
  • BIT (2)
  • BIT, UNITAP (2)
  • Bolt termination and kit (2)
  • Bolted Lugs & Terminals (29)
  • Bracket fastener (2)
  • Breatout Boot (3)
  • Bridle Rings (2)
  • Bugle Head Drywall Screw (8)
  • Bugle Head Wood Rocket Drywall Screw (12)
  • Butt Splice (3)
  • Cable Connector (2)
  • Cable/Conduit to Stud (3)
  • Cap Screw (7)
  • Ceiling/Acoustical (2)
  • Clamps and Clips (2)
  • Cleaning Tools (2)
  • Cold Shrink End Cap (4)
  • Cold Shrink Splice (6)
  • Combination Box/Conduit (3)
  • Combo nut washer (3)
  • Conduit and Box Support Fastener (8)
  • Conduit and cable support (2)
  • Conduit and Voltage Marker Cards (3)
  • Conduit cable fastener and support (2)
  • Conduit Locknut (4)
  • Conduit to beam fastener (27)
  • Conduit to conduit fastener (2)
  • Conduit to rod fastener (3)
  • Conduit to stud fastener (4)
  • Conduit U-bolt (5)
  • Copper Connectors (2)
  • Copper Split Bolts (9)
  • Crayon (2)
  • C-Tap (4)
  • DETECTABLE (6)
  • Disconnect (7)
  • Disconnect Connectors (3)
  • Double Sided Entry (18)
  • Drive Pin (2)
  • Drop in Anchor (5)
  • Dual Wall (Adhesive Lined) (3)
  • Dual-Rated (4)
  • Dual-Rated Mechanical Connector (16)
  • Eye Bolt (5)
  • Farmer Screw (2)
  • FENDER WASHER (18)
  • Finished Hex Nut (13)
  • Fixture Hanger (2)
  • Flat Hangar Screw (2)
  • FLAT WASHER (13)
  • Flexible Polyolefin Adhesive-Lined (2)
  • Full Thread Wedge Anchor (13)
  • GAR (23)
  • GAR-BU (2)
  • GB (4)
  • GBM (3)
  • GC (5)
  • GC-CT (3)
  • GD (4)
  • GENERAL PURPOSE (11)
  • General Use (2)
  • GP (2)
  • Grade 5 Hex Nut (2)
  • GRC, High Strength (3)
  • Ground Machine Screw (3)
  • Hammer-On Flange Clips (4)
  • Hanger (3)
  • Heat Shrinkable Butt Splice (2)
  • Heavy Wall (16)
  • Heavy-Duty Laminated Lockout Tag (2)
  • Hex Head Concrete Anchor System (6)
  • Hex Head Lag Screw (24)
  • Hex Head Tap Bolt (17)
  • HIGH PERFORMANCE (45)
  • H-Type Compression Tap Connector (11)
  • Inline (2)
  • IN-Line Splicer/Reducer (8)
  • Installation Tool (3)
  • INSULATED (2)
  • Insulating Sleeve (13)
  • Insulation Displacement (12)
  • Integrated Mounting Hole (5)
  • Jack Chain (3)
  • KC and K2C Series (32)
  • K-Lath Screw (6)
  • KS (7)
  • KS, Compact (7)
  • KSU, Universal (9)
  • Label (28)
  • LOCK WASHER (11)
  • LOCKING (4)
  • Locking Fork Terminal (3)
  • Long Barrel - One Hole (18)
  • Long Barrel - Two Hole (12)
  • Long Barrel, Tin Plated (41)
  • Low Voltage Mounting Plates (8)
  • MACHINE SCREW (13)
  • Machine Screw Anchor (2)
  • Machine Screw Hex Nut (4)
  • Machine Screw Kit (4)
  • Mechanical Grounding (11)
  • Molded case circuit breaker accessory (17)
  • Molds (3)
  • MOUNTING BASE (13)
  • Multi Cable (8)
  • NAIL PLATE (2)
  • Non-Insulated Ring Terminal (4)
  • Non-Metallic Cable Splices And Taps (2)
  • Nut (5)
  • nVent CADDY All-in-One Accessories (2)
  • nVent CADDY Cat HP J-Hook System (3)
  • nVent CADDY Speed Link SLK System (3)
  • Nylon Fully Insulated Female Disconnect (2)
  • Nylon Fully Insulated Male Disconnect (3)
  • Nylon Insulated Female Disconnect (5)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (2)
  • Nylon Insulated Open Top 90 Degree Flag Female Disconnect (2)
  • Nylon Insulated Ring Terminal (13)
  • Nylon Insulated Wire Joint (4)
  • Offset Pin (2)
  • Oval Head Wall Plate Screw (2)
  • Permanent Acrylic Adhesive (3)
  • Pipe Wrap (2)
  • Premium (12)
  • Pre-printed Books (5)
  • Printer Ribbon (5)
  • Pull Line Measuring Tape (5)
  • Purlin Clips (2)
  • Purlin hanger (4)
  • Push In Clamps (3)
  • Push-In (11)
  • Rejacketing Sleeve (5)
  • RIGID (2)
  • RING (10)
  • Ring Tongue (10)
  • Rod to beam hanger (2)
  • Rod to Purlin (2)
  • Rod/Wire (7)
  • Screw Gun Brackets and Accessories (6)
  • Secure Grip Wire Connectors (6)
  • Select Purpose (10)
  • Self-Extinguishing, Heat Shrink (2)
  • Self-Sticking Safety Sign (2)
  • Service Post Connectors (5)
  • Servie Entrance Sleeves (2)
  • Sheet Metal Screw (31)
  • Short Barrel - One Hole (14)
  • Short Barrel - Two Hole (3)
  • Single (Thin) Wall (24)
  • Single Sided Entry (14)
  • SLEEVE (16)
  • Solid Pin (2)
  • SP (3)
  • Spiral Wrap (7)
  • SPLICE (9)
  • Splice Cap (2)
  • Splice Connector (6)
  • Splice Kit (4)
  • Split-Bolt (13)
  • Spring Nut (6)
  • Square washer (8)
  • STANDARD (2)
  • Standard Barrel (26)
  • Standard Barrel, Tin Plated (50)
  • Standard Wire Connectors (8)
  • Straight Ceiling Wire (4)
  • Strong Tack Adhesive (3)
  • Stud Mounted Box Brackets (3)
  • Submersible Pedestal Connectors (4)
  • Suspension fastener (2)
  • Tag (2)
  • Tape Roll Dispenser with Tape (3)
  • Tape Roll Refill (10)
  • Taps (19)
  • T-bar fastener and spacers (3)
  • Terminal Block (16)
  • Terminal Block Accessories (9)
  • Terminal block accessory (10)
  • Terminal blocks (13)
  • Terminals (7)
  • T-Grid Box Hanger Accessories (3)
  • Thin-Wall Flexible Polyolefin (10)
  • Three Cables to Rod or Tube (2)
  • Tin Plated Copper Split Bolt (6)
  • TP-F (5)
  • Twist-On (20)
  • UG, Standard (2)
  • Underground Line Tape (4)
  • Underground Line Tape-Detectable (7)
  • Vinyl Insulated Butt Splice (9)
  • Vinyl Insulated Female Disconnect (5)
  • Vinyl Insulated Fork Terminal (11)
  • Vinyl Insulated Locking Fork Terminal (10)
  • Vinyl Insulated Male Disconnect (4)
  • Vinyl Insulated Ring Terminal (24)
  • Voltage And Conduit, Large (3)
  • Voltage And Conduit, Medium (4)
  • Wall Board Kit (6)
  • Wide Range Tap Connectors (5)
  • Winged Wire Connectors (11)
  • WIRE (4)
  • Wire Connectors & Termination (2)
  • Wire Marker (3)
  • Wire Marker Books (18)
  • Wrap Around Gel Splice Kits (2)
  • Write-On Dispenser with Tape & Pen (4)
  • Y style toggle hook termination and kit (3)
  • YA-A (5)
  • YA-A, Dual Rated (2)
  • YA-E (2)
  • YAEV, Heavy Duty (4)
  • YAEV-L, Heavy Duty (2)
  • YC-C Series (4)
  • YGF (2)
  • YS, Long Barrel (18)
  • YS-L, Standard Barrel (10)
  • Zamac Anchor (9)
  • Show More...

• Wire Size

  

  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (3)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (2)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (2)
  • 0.187 in Dia x 1 in W (4)
  • 0.187 in Dia x 1.75 in W (2)
  • 1/0-14 AWG (6)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (2)
  • 12-10 AWG (43)
  • 12-14 AWG (2)
  • 16-14 AWG (7)
  • 18-14 AWG (8)
  • 22-16 AWG (8)
  • 22-18 AWG (5)
  • 250 MCM-6 AWG (5)
  • 3/0-6 AWG (9)
  • 350 MCM-12 AWG (3)
  • 350 MCM-6 AWG (7)
  • 4-14 AWG (5)
  • 500 MCM-4 AWG (4)
  • 600 MCM-6 AWG (3)
  • 750-250 MCM (4)
  • 8 AWG (7)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Show More...

• Die Index

  

  • 10 (12)
  • 1011 (4)
  • 11 (7)
  • 12 (11)
  • 13 (11)
  • 14 (8)
  • 15 (8)
  • 16 (5)
  • 17 (4)
  • 18 (7)
  • 19 (4)
  • 20 (9)
  • 22 (5)
  • 24 (6)
  • 296 (2)
  • 298 (2)
  • 299 (2)
  • 40 (2)
  • 435 (2)
  • 49 (8)
  • 7 (10)
  • 8 (11)
  • 9 (2)
  • 997 (8)
  • 998 (3)
  • C (2)
  • O (2)
  • Show More...

• Tensile Strength

  

  • 11 (2)
  • 120 (6)
  • 120 lb/530 N (7)
  • 144 (2)
  • 15 (11)
  • 17 (10)
  • 18 (5)
  • 18 lb/80 N (2)
  • 18 lb;8.165 kg (3)
  • 19.8 (11)
  • 20 (3)
  • 2400 psi (17)
  • 250 (3)
  • 2500 lb (3)
  • 30 (2)
  • 30 lb/135 N (5)
  • 333.6 (3)
  • 40 (6)
  • 42 lb/in (4)
  • 50 (13)
  • 50 lb/222 N (4)
  • 50 lb;220 Nm;22.68 kg (7)
  • 50;222 (3)
  • 74 (2)
  • Show More...

• Thickness

  

  • .007 (32)
  • 0.00022 (2)
  • 0.003 (6)
  • 0.0035 (2)
  • 0.004 (15)
  • 0.004;0.102 (3)
  • 0.0065 (3)
  • 0.02 in;0.51 mm (2)
  • 0.025 in;0.64 mm (5)
  • 0.03 in;0.75 mm (2)
  • 0.035 (2)
  • 0.04 (14)
  • 0.04 INCH (2)
  • 0.040000000000000 (2)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.1 mm (2)
  • 0.047 (2)
  • 0.05 (11)
  • 0.05 in;1.3 mm (7)
  • 0.05 in;1.31 mm (4)
  • 0.055 in;1.4 mm (2)
  • 0.06 (7)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.09 (2)
  • 1/16 (7)
  • 1/4 in (2)
  • 10 (5)
  • 10 mil;0.25 mm (4)
  • 20 (2)
  • 3/32 (3)
  • 3/64 (3)
  • 30 (3)
  • Show More...

• Length

  

  • 0.5 in (3)
  • 0.6 in (2)
  • 0.75 in (2)
  • 1 (24)
  • 1 in (11)
  • 1.125 in;28.58 mm (2)
  • 1.37 in (4)
  • 1/2 (7)
  • 1/2 in (8)
  • 10 (3)
  • 10.9 (2)
  • 100 (9)
  • 100 ft (3)
  • 100 ft , 30.48 m (3)
  • 11.08 in;284.4 mm (2)
  • 11.1 in;282 mm (2)
  • 11.6 (2)
  • 1-1/2 (16)
  • 1-1/2 in (4)
  • 1-1/4 (20)
  • 1-1/4 in (7)
  • 1-1/8 (3)
  • 12-1/2 in (3)
  • 13.4 in;340 mm (3)
  • 13.5 (5)
  • 1-3/4 (3)
  • 14 (7)
  • 14.2 (4)
  • 14.2 in;360.5 mm (2)
  • 14.6 in;371 mm (2)
  • 144 (2)
  • 1-5/8 (4)
  • 1500 ft (2)
  • 16 (3)
  • 16 Foot (3)
  • 18 in;457 mm (2)
  • 2 (12)
  • 2 in (13)
  • 2.5 in (2)
  • 200 (4)
  • 21 (13)
  • 2-1/2 (8)
  • 2-1/4 (3)
  • 2-3/4 (3)
  • 3 (4)
  • 3 in (6)
  • 3.6 (5)
  • 3.62 in;91.95 mm (2)
  • 3/4 (14)
  • 3/4 in (2)
  • 3/8 (3)
  • 3/8 in (2)
  • 30 (4)
  • 3000 ft (2)
  • 3-1/2 (3)
  • 3-1/4 (3)
  • 3-3/4 (2)
  • 4 (7)
  • 4 ft (9)
  • 4.5 (4)
  • 4-1/2 (2)
  • 48 in;121.9 mm (5)
  • 5 (6)
  • 5.4 (6)
  • 5/8 in (2)
  • 5-1/2 in (4)
  • 55 m;60 yd (2)
  • 6 (3)
  • 6.1 in (2)
  • 60 (21)
  • 66 (12)
  • 7 Foot (2)
  • 7.2 (7)
  • 7.31 in;185.67 mm (2)
  • 7.5 in (2)
  • 7.6 in;193 mm (3)
  • 7.800000000000000 (2)
  • 72513 (3)
  • 8 (4)
  • 8 in (2)
  • 84 (2)
  • 9 (3)
  • 9 in;22.9 mm (2)
  • Show More...

• Size

  

  • #10 (2)
  • #10 X 1 IN (8)
  • #10 X 1/2 IN (3)
  • #10 x 1-1/2 IN (2)
  • #10 x 1-1/4 IN (2)
  • #10 x 3/4 IN (2)
  • #12 (2)
  • #12 x 1 IN (2)
  • #12 x 1-1/4 IN (2)
  • #6 x 1 IN (5)
  • #6 x 1-1/2 IN (2)
  • #6 x 1-1/4 IN (4)
  • #6 x 1-1/8 IN (3)
  • #6 x 1-5/8 IN (3)
  • #6 X 2 IN (4)
  • #6 x 7/16 IN (2)
  • #6-32 x 1 IN (2)
  • #6-32 x 1/2 IN (3)
  • #6-32 x 1-1/2 IN (2)
  • #6-32 x 1-1/4 IN (2)
  • #6-32 x 2 IN (2)
  • #6-32 x 3/4 IN (2)
  • #8 x 1 IN (3)
  • #8 X 1/2 IN (3)
  • #8 x 1-1/2 IN (2)
  • #8 x 1-1/4 IN (5)
  • #8 x 2-1/2 IN (2)
  • #8 X 3/4 IN (3)
  • 0.335 in H x 1 in W (4)
  • 0.335 in H x 1.75 in W (2)
  • 0.375 in W x 21 ft L (3)
  • 0.5 in W x 21 ft L (3)
  • 0.75 in W x 21 ft L (7)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 In (EMT), 3/4 In (IMC/Rigid) (2)
  • 1 In Conduit (5)
  • 1.56 in H x 0.22 in W (2)
  • 1/2 (6)
  • 1/2 in (9)
  • 1/2 In (EMT) (2)
  • 1/2 In, 3/4 In (2)
  • 1/2 In, 3/4 In Conduit (8)
  • 1/2 In-13 TPI (2)
  • 1/2 x 2 (3)
  • 1/2 x 4 (2)
  • 1/2 X 4-1/2 (3)
  • 1/2-13 x 2 (2)
  • 1/4 (8)
  • 1/4 In Threaded Rod (2)
  • 1/4 In-20 TPI (2)
  • 1/4 x 1 (5)
  • 1/4 X 1-1/2 (5)
  • 1/4 X 1-1/2 IN Marker (11)
  • 1/4 x 1-1/4 (4)
  • 1/4 x 1-3/4 (2)
  • 1/4 X 2 (6)
  • 1/4 x 2-1/4 (2)
  • 1/4 x 3 (4)
  • 1/4 x 3/4 (3)
  • 1/4 x 3-1/4 (3)
  • 1/4 x 4 (2)
  • 1-1/2 In Conduit (2)
  • 1-1/4 in (2)
  • 1-1/4 In Conduit (2)
  • 2 In Conduit (2)
  • 2 IN x 100 FT (2)
  • 3/16 x 1-1/4 (2)
  • 3/32 In Thickness Purlin (2)
  • 3/4 in (2)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (5)
  • 3/8 (7)
  • 3/8 in (2)
  • 3/8 In Conduit (4)
  • 3/8 In-16 TPI (3)
  • 3/8 x 1 (3)
  • 3/8 x 1-1/2 (2)
  • 3/8 x 1-1/4 (2)
  • 3/8 x 2 (3)
  • 3/8 x 2-3/4 (2)
  • 3/8 x 3 (2)
  • 3/8 x 4 (2)
  • 3/8 x 5 (2)
  • 3/8-16 x 1-9/16 (2)
  • 4 in W x 100 ft L (2)
  • 4.33 in W x 200 ft L (4)
  • 5/16 (2)
  • 7/16 In Diameter (4)
  • 9/16 in (3)
  • 9/16 In Diameter (3)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.25 - W=.906 - ID=.354 (2)
  • H=6.00 - W=3.25 (7)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.153 - W=.748 (3)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (3)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.83 - W=.670 - OD=.470 - ID=.360 (2)
  • L=1.840 - W=1.870 - H=1.870 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.36 - W=1.00 - OD=.690 - ID=.550 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.48 - W=1.09 - OD=.750 - ID=.590 (2)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • Length 1-13/16 inch (3)
  • Thickness - 7mil - Length-60' - Width 3/4" (21)
  • Thickness - 7mil - Length-66' - Width 3/4" (11)
  • Show More...