Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • "Z" Purl" Hanger, 1/4" Threaded Rod (2)
  • 1/2" Staples Plastic Insulated 2 Conductor Romex 14-2 (2)
  • 2 Position Bridge (3)
  • 3/4" Staples Plastic Insulated 2 Conductor Romex 12-3 (2)
  • 3M™ Cold Shrink 3-Conductor Breakout Kits 3C-Bok Series (4)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (10)
  • 3M™ Cold Shrink QS-Iii 3/C Armored or Non-Armored Cable Spli (2)
  • 3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 551 (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3G Series For (2)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3-RJS Series F (4)
  • 3M™ Heat Shrink Cable Breakout Boot (3)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (8)
  • 3M™ Heat Shrink Tubing Bbi (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (3)
  • 3M™ Highland™ Wire Connectors (3)
  • 3M™ Motor Lead Pigtail Splice Kits 5316-5319 (2)
  • 3M™ Motor Lead Pigtail Splice Kits, 1-Hole Lug Connections 5 (5)
  • 3M™ Performance Plus™ Wire Connectors (8)
  • 3M™ Rejacketing Sleeves RJS Series (5)
  • 3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Seri (2)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Idc Connector 562 (2)
  • 3M™ Scotchlok™ Idc Connector 567 (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 3M™ Splice Kit Uf (3)
  • 4 Wire Ground TB 1.5 MM2 (2)
  • 5 Position Bridge (2)
  • Aluminum to Copper Lug (1)
  • AMT Connector (2)
  • Automatic Tension Splice Connector (2)
  • B33, B342, White, 0.313 X 2" Fit (2)
  • Barricade Tape (1)
  • Barrier Strip (3)
  • Beam Clamp (2)
  • Butt Connector (1)
  • Butt Splice (7)
  • Butt Splice Connector (13)
  • Cable Connector (2)
  • Cable Splice Kit (1)
  • Cable Staple (1)
  • Cable Tie (57)
  • Cable Tie Mounting Base (1)
  • Ceiling Wire (1)
  • Clip, Conduit, (4)
  • CMP Lug Cu Long 6 Awg 1/4 BLT 5/8 SPC (2)
  • Compression (14)
  • Compression Connector (7)
  • Compression Lug (23)
  • Compression Splice (3)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Conductor Lug (11)
  • Conduit to BM FS, 1 1/2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 1" Emt, 3/4" Imc, Rigid, 1/8" to 1/4" Flan (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1/2", 3/4" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to BM FS, 3/8" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to Conduit Fastener (1)
  • Conduit to Rod FS, Guide-Rite, 1/2", 3/4" Conduit Size (2)
  • Copper Compression Lug (5)
  • Copper Connector (3)
  • Coupling Nut (3)
  • Crimp On Wire Connector (2)
  • Cross Connector (1)
  • C-Tap (1)
  • C-Type Copper Compression Tap (8)
  • D4/6.P.2L (2)
  • Direct Burial Splice Kit 8 - 2 Awg (2)
  • Disconnect Terminal (2)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drop in Anchor (2)
  • Drop-In Anchor (2)
  • Easy-Splice Roll On (2)
  • End Bracket (2)
  • End Cover (6)
  • End Plate (2)
  • End Stop For 35MM Rail - One Screw Mount (2)
  • Eye Bolt (2)
  • Feed Through Terminal (6)
  • Female Disconnect (3)
  • Female Disconnecter Terminal (3)
  • Female Disconnector (5)
  • Fender Washer (14)
  • Flat Plate Fitting (1)
  • Flat Washer (11)
  • Flex Lug (2)
  • Fork Terminal (13)
  • Friction Tape (2)
  • Fuse Terminal Block (1)
  • Ground Connector (3)
  • Heat Shrink Splice (1)
  • Heat Shrink Tubing (1)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • H-Type Compression Connector (9)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Butt Splice (4)
  • Insulated Ferrule (4)
  • Insulated Staples (2)
  • Insulation Displacement Connector (4)
  • Insulation Piercing Connector (1)
  • Insulation Putty (1)
  • Insulation-Tap Connector (9)
  • Lay-In Connector (2)
  • Lock Washer (3)
  • Locking Fork (4)
  • Long Barrel Lug (11)
  • Low Voltage Splice (1)
  • Machine Screw (1)
  • Male Disconnect (1)
  • Male Tab (1)
  • Mechanical (70)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (17)
  • Mechanical Grounding Connector (1)
  • Mechanical Lug (1)
  • Mold Handle Clamp (1)
  • Molds (2)
  • Mounting Rail (1)
  • Multi-Conductor Terminal Block (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • No Twist SQ Washer, 7/16" Hole, 3/8" Bolt, ZN PLTD (2)
  • Non-Metallic Cable Connector (2)
  • Panelboard Lug (3)
  • Partition Plate (2)
  • Plug-In Bridge (2)
  • Polaris Vision Tap (Clear) 3/0-6 Awg Polaris Insulated Tap C (2)
  • Polaris Vision Tap (Clear) 4-14 Awg Polaris Insulated Tap CO (2)
  • Power Cable Splice Cover (4)
  • Power Cable Termination (3)
  • Power Distribution Block (15)
  • Power Splicer and Stud Block (1)
  • Power Stud Block (1)
  • Power Terminal Block (2)
  • Pre-Printed Wire Marker Book (2)
  • Push-In Connector (3)
  • Push-in Wire Connector (7)
  • Rebar Clamp (1)
  • Ring Terminal (10)
  • Ring Tongue Compression Terminal (5)
  • Rod & Wire FS (2)
  • Roof Flashing (2)
  • Roof Jack (2)
  • Scotch® Varnished Cambric Tape 2510 (4)
  • Scotch® Varnished Cambric Tape 2520 (2)
  • Screw Anchor (1)
  • Screw Connection Single Level-Through-Feed (7)
  • Service Entrance Compression Splice (5)
  • Service Post Connector (14)
  • Single Barrel Lug (5)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Spade Terminal (1)
  • Splice (5)
  • Splice Cap (2)
  • Splice Cap Insulator (1)
  • Splice Connector (2)
  • Splice Kit (4)
  • SPLICE REDUCER (3)
  • Splicer Power Block (1)
  • Splicer Reducer (3)
  • Splicing Connector (2)
  • Splicing Tape (1)
  • Split Bolt Connector (36)
  • Split Lock Washer (3)
  • Spring Nut (3)
  • Standard Barrel Lug (17)
  • Standard Barrel Single Hole Compression Lug (18)
  • Staple (9)
  • Submersible Connector (2)
  • Tap Bolt (15)
  • Terminal (80)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Terminal Strip (5)
  • Thin Wall Heat Shrink Tube (11)
  • Thin Wall Shrink Tube (11)
  • Transformer Lug (1)
  • Twister Connector (6)
  • Twist-On Wingnut (7)
  • Twist-On Wire Connector (11)
  • Twist-On Wire Nut (5)
  • Two Barrel Lug (2)
  • Two-Way Splice Connector (9)
  • Underground In Line Splice (1)
  • Vinyl Mastic Tape (2)
  • Wedge Clamp (3)
  • Wing Twist Connector (2)
  • Wing Wire Connector (6)
  • Winged Wire Connector (10)
  • Wire Connector (16)
  • Wire Marker Book (4)
  • Wire Twist Connector (6)
  • Show More...

• Brand

  

  • 3M (67)
  • 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS (1)
  • ABB (19)
  • Abb Installation Products, Inc (3)
  • ARLINGTON (1)
  • Blackburn Grounding (12)
  • Blackburn Mechanical (144)
  • Brady® (22)
  • Bridgeport (1)
  • Buchanan (39)
  • BURNDY (262)
  • Burndy LLC (2)
  • CALBRITE (5)
  • Catamount (16)
  • Color Keyed / Blackburn (2)
  • COLOR-KEYED (81)
  • Connector Bloks(TM) (16)
  • Dottie (3)
  • Easy-Twist (13)
  • Eaton (114)
  • Eaton Corp (4)
  • EATON CUTLER-HAMMER (50)
  • Engineered Products CO. (1)
  • Erico, Inc. Eritec-Caddy (1)
  • Gardner Bender (7)
  • Hellermanntyton (2)
  • Highland (10)
  • Ideal (76)
  • Ilsco (20)
  • Ilsco Corporation (25)
  • L.H. Dottie CO. (1)
  • LH DOTTIE (69)
  • METALLICS INC. (1)
  • milwaukee (1)
  • Minnesota Mining (3M) (52)
  • NSi (7)
  • Nsi Industries (147)
  • nVent CADDY (23)
  • nVent ERICO (5)
  • PANDUIT (182)
  • Panduit® (21)
  • Pass and Seymour (1)
  • Peco Fasteners (7)
  • Peco Fasteners, Inc. (18)
  • Performance Plus (2)
  • Platinum Tools (7)
  • Polaris (260)
  • Scotch (8)
  • Scotchcast (3)
  • ScotchCode (1)
  • Scotchlok (31)
  • Selecta Products (1)
  • Southwire (3)
  • Sta-Kon (55)
  • Steel City (2)
  • T&B Elec Suppl (2)
  • TE CONNECTIVITY / ENERGY (3)
  • Temflex (3)
  • Thomas & Betts (21)
  • Thomas&Betts-Abb Ins Prod (4)
  • TOPAZ ELECTRIC CORP (1)
  • Ty-Rap (18)
  • Unistrut Corp. (2)
  • Viton(R) (1)
  • W.W. Cross Inc. (3)
  • WAGO CORPORATION (2)
  • Weidmuller, Inc. (13)
  • XX-Marathon Special Products (3)
  • Show More...

• Sub Brand

  

  • 3M(R) (7)
  • 3M(TM) (22)
  • Aluminum Compression (2)
  • B-Cap(R) (8)
  • Blackburn (74)
  • Burndy (30)
  • CADDY (21)
  • Color-Keyed (47)
  • Easy Twist (2)
  • Easy-Splice(TM) (5)
  • Easy-Twist(TM) (21)
  • ERICO (3)
  • Greenie(R) (2)
  • Highland(TM) (14)
  • Ideal (2)
  • In-Sure(R) (7)
  • Klippon(R) (13)
  • Mechanical Connector (3)
  • NSI (41)
  • Panduit Corp (2)
  • Pan-Lug (3)
  • Polaris Black (19)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Powerplug(R) (2)
  • Scotch(R) (3)
  • Scotchlok(TM) (3)
  • Spec-Kon (3)
  • Split Bolts (10)
  • Sta-Kon (34)
  • Structuredground (3)
  • Temflex (2)
  • Temflex(TM) (3)
  • Twister(R) (7)
  • Type CTAPF (2)
  • Type HSTT (2)
  • Type LAM (2)
  • Type LAMA (5)
  • Type LCA (5)
  • Type LCC (9)
  • Type LCCX (5)
  • Type LCD (6)
  • Type Sbc (8)
  • Wing-Nut(R) (7)
  • WingTwist(TM) (2)
  • Wire-Nut(R) (6)
  • WireTwist(TM) (6)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (3)
  • #12 AWG (24)
  • #14 AWG (29)
  • #14 AWG (Stranded) (9)
  • #14 AWG (Stranded);#12 AWG (Solid) (2)
  • #16 AWG (12)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #18 AWG (6)
  • #2 AWG (3)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Stranded) (3)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #22 AWG (9)
  • #24 AWG (3)
  • #26 AWG (9)
  • #4 AWG (12)
  • #4 AWG (Stranded) (7)
  • #6 AWG (36)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Stranded) (18)
  • #8 AWG (6)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Solid) (2)
  • #8 AWG (Stranded) (3)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #14 AWG (5)
  • (2) #16 AWG (2)
  • (2) #18 AWG (11)
  • (2) #20 AWG (2)
  • (2) #22 AWG (3)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (3)
  • (3) #22 AWG (3)
  • 0.08 mm^2;28 AWG (2)
  • 16 AWG (1)
  • 22 AWG (1)
  • 250 MCM (6)
  • 26 AWG (5)
  • 4/0 AWG (1)
  • Show More...

• Number Of Circuits

  

  • 10 (1)
  • 12 (4)
  • 4 (1)
  • 6 (1)
  • 8 (1)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (4)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #1/0 AWG (2)
  • #1/0 AWG (Stranded) (2)
  • #10 AWG (23)
  • #10 AWG (Solid);#2 AWG (Stranded) (2)
  • #10 AWG/4 sq.mm (6)
  • #12 AWG (5)
  • #12 AWG/2.5 sq.mm (3)
  • #14 AWG (18)
  • #16 AWG/1.5 sq.mm (2)
  • #18 AWG (4)
  • #2 AWG (17)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (Stranded) (7)
  • #3 AWG (Stranded);#2 AWG (Solid) (3)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (13)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (Stranded) (4)
  • #6 AWG (27)
  • #6 AWG (Stranded) (6)
  • #8 AWG (12)
  • #8 AWG (Stranded) (2)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #14 AWG (2)
  • (2) #6 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (6)
  • (3) #16 AWG (4)
  • (4) #12 AWG (4)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (10)
  • 1/0 AWG (17)
  • 1/0 AWG (Stranded) (5)
  • 10 AWG (1)
  • 12 AWG (5)
  • 14 AWG (1)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (16)
  • 2/0 AWG (Stranded) (5)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 250 kcmil (9)
  • 250 kcmil (Stranded) (2)
  • 250 MCM (12)
  • 3/0 AWG (11)
  • 300 kcmil (2)
  • 300 MCM (1)
  • 350 kcmil (8)
  • 350 MCM (6)
  • 4/0 AWG (6)
  • 500 kcmil (4)
  • 500 MCM (9)
  • 600 kcmil (4)
  • 600 MCM (3)
  • 750 MCM (2)
  • 8 AWG (2)
  • Show More...

• Number Of Poles

  

  • 10 (2)
  • 12 (2)
  • 4 (1)
  • 6 (1)
  • 8 (2)
  • Show More...

• Number Of Secondary Openings

  

  • 1 (5)
  • 12 (1)
  • 2 (3)
  • 4 (3)
  • 6 (6)
  • Show More...

• Insulation Material

  

  • EPDM Rubber (3)
  • Flame Retardant Polycarbonate (3)
  • Nylon (7)
  • Plastisol (36)
  • PVC (2)
  • Thermoplastic (17)
  • Vinyl (45)
  • Wemid (10)
  • Show More...

• Primary Opening Wire Size

  

  • #14 to #2/0 AWG (6)
  • #4 AWG to 500 MCM (2)
  • #6 AWG to 350 MCM (3)
  • #6 AWG to 500 MCM (3)
  • 3/8 INCH-16 TPI X 1-3/16 INCH L STUD (1)
  • 4 AWG TO 500 MCM (1)
  • 6 AWG TO 250 MCM (1)
  • Show More...

• Conductor Material

  

  • Aluminum (24)
  • Aluminum;Copper (42)
  • Brass (5)
  • Brass with Copper Sleeve (4)
  • Copper (252)
  • Copper Alloy (Contacts) (2)
  • Copper/Aluminum (10)
  • Copper;Aluminum (47)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • Copper;Tin Plated Stainle (3)
  • High Copper Alloy (6)
  • Polyamide 66 (2)
  • Steel (4)
  • Show More...

• Secondary Opening Wire Size

  

  • #14 to #2/0 AWG (9)
  • #6 to #4/0 AWG (2)
  • 3/8 INCH-16 TPI X 1-3/16 INCH L STUD (1)
  • 3/8 INCH-16 TPI X 1-5/8 INCH L STUD (1)
  • 6 AWG TO 250 MCM (1)
  • Show More...

• Insulation Color

  

  • Black (42)
  • Black (Code) (3)
  • Black (Die Color) (6)
  • Blue (37)
  • Blue (Code) (13)
  • Blue (Die Color) (5)
  • Blue/Gray (2)
  • Brown (3)
  • Brown (Code) (6)
  • Brown (Die Color) (8)
  • Dark Beige (9)
  • Gray (22)
  • Gray (Code) (5)
  • Gray (Die Color) (5)
  • Green (10)
  • Green (Die Color) (3)
  • Green/Yellow (2)
  • Metallic Silver (2)
  • Orange (12)
  • Orange (Code) (2)
  • Orange (Die Color) (3)
  • Orange/Blue (2)
  • Pink (Code) (3)
  • Pink (Die Color) (3)
  • Purple (6)
  • Purple (Code) (3)
  • Purple (Die Color) (3)
  • Red (29)
  • Red (Code) (2)
  • Red (Die Color) (7)
  • Red/Yellow (3)
  • Silver (3)
  • Tan (5)
  • Tan/Red (2)
  • Tan/Yellow (2)
  • Yellow (38)
  • Yellow (Code) (2)
  • Yellow (Die Color) (2)
  • Show More...

• Current Rating

  

  • 10/15/17.5 A (2)
  • 175 A (3)
  • 20/22/28/32 A (2)
  • 230 AMPERE (1)
  • 24 A (5)
  • 255 AMPERE (1)
  • 30 A (6)
  • 30/38/41 A (4)
  • 310 A (2)
  • 350 A (4)
  • 380 A (2)
  • 760 A (3)
  • 760 AMPERE (1)
  • Show More...

• Voltage Rating

  

  • 1000 V (8)
  • 120/277 (2)
  • 1k VAC (4)
  • 1k/5k (2)
  • 2000 (2)
  • 24 VDC (2)
  • 300 (7)
  • 300 V (13)
  • 300, 400 (2)
  • 35 (68)
  • 35 kV (69)
  • 35kV (2)
  • 600 (97)
  • 600 V (420)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (7)
  • 600 V ac (26)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (11)
  • 600V (3)
  • 630V (2)
  • EN 550V, UL 600V, 800V connection (3)
  • IEC 250V, UL 300V (2)
  • IEC 500V, UL 150V (4)
  • IEC 800V, EN 550V, UL 600V (3)
  • IEC 800V, EN 700V, UL 600V (13)
  • NA (10)
  • UL 300V (2)
  • Show More...

• Material

  

  • Aluminum (214)
  • Aluminum - Tin Plated Copper Pin (3)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • ASTM A36/A575/A576/A635/A1011 Grade 33 Low Carbon Steel (2)
  • Brass (17)
  • Bronze Alloy (16)
  • Bronze Alloy, Leaded (12)
  • Bronze, Leaded, Commercial (8)
  • Carbon Steel (5)
  • Clear Acrylic (3)
  • Cold Rolled High Carbon Steel (38)
  • Copper (429)
  • COPPER ALLOY (24)
  • Copper Alloy, Cast (5)
  • Copper Sleeves (2)
  • Copper, Nylon (2)
  • Fiber Reinforced Thermal Plastic (3)
  • Flame-retardant Polypropelene (53)
  • Flame-retardant polypropelene shell (10)
  • FLEXIBLE POLYOLEFIN (1)
  • Graphite Metallic Steel (4)
  • HEAT SHRINK (1)
  • Heat-shrink Polyolefin (12)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (5)
  • Low Carbon Steel (16)
  • Malleable Iron (2)
  • NICKEL PLATED STEEL (1)
  • Nylon (3)
  • Nylon 6.6 (3)
  • Nylon 6/6 (12)
  • Nylon Housing, Copper Alloy Contacts (3)
  • Nylon/Polyamide 6.6 (26)
  • Plastic Housing (3)
  • Polyamide (13)
  • Polycarbonate (3)
  • Polyester (4)
  • Polyolefin (16)
  • Polypropylene (7)
  • Porcelain (2)
  • PVC (1)
  • Spring Steel (2)
  • Stainless Steel (16)
  • Steel (101)
  • Steel (Screw) (5)
  • Thermoplastic (26)
  • THERMOPLASTIC POLYESTER (1)
  • TIN PLATED ALUMINUM (1)
  • TIN PLATED BRASS (1)
  • Tin-Plated Aluminum (2)
  • Tin-Plated Copper (67)
  • Vinyl (6)
  • Vinyl Cloth (2)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl-Impregnated Cloth (6)
  • Weather-Resistant Nylon 6.6 (15)
  • Show More...

• Number Of Conductors

  

  • 1 (102)
  • 10 (2)
  • 12 (2)
  • 2 (181)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 2 to 6 (7)
  • 3 (30)
  • 4 (19)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • Show More...

• Number Of Pieces

  

  • 370 (2)
  • 50 (2)
  • Show More...

• Cover Type

  

  • CC1432, CLEAR PLASTIC (1)
  • CC1433, CLEAR PLASTIC (1)
  • CC1453, CLEAR PLASTIC (1)
  • Clear Acrylic (15)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - CU Splice (2)
  • # 2 AWG (STR) - 1/4 Mounting Hole (2)
  • # 2 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 4 AWG (STR) - 1/4 Mounting Hole (2)
  • # 4 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (3)
  • # 8 AWG (STR) - 3/8 Mounting Hole (3)
  • # 8 AWG (STR) - CU Splice (2)
  • (2) 750-250 MCM - Dual Rated (2)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • 1,000V Maximum In Fixtures And Signs;Better Grip And More Leverage For Faster Connections With Less Effort;Comfortable Swept Wings Designed To Help Reduce Hand Fatigue;Comply With Federal Specification W-S-610E;Expanding Square-Wire Spring Provides A Secure Connection Every Time;Features: The Widest Red/Tan Wire Range In The Industry;Min. 2 #18 To Max. 4 #10;Model Number: 344;Suregrip Overmolding Provides Better Grip For Improved Leverage And More Torque;Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 D (2)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT41;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT51;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT52;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT54;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (2)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 1/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 1/0 AWG (STR) - CU Splice (2)
  • 10 Replacement Sleeves Per Bag (3)
  • 2/0 AWG (STR) - # 1 Pin Size (2)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 1/2 Mounting Hole (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 250 MCM (STR) - CU Splice (2)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (3)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 3/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 3/0 AWG (STR) - CU Splice (2)
  • 300 MCM (STR) - 4/0 Pin Size (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (3)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 3m Clear Tubing Fp-301 Provides Excellent Visibility For Component Packing;Split Resistant (9)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (3)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 4/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 4/0 AWG (STR) - CU Splice (2)
  • 400 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (3)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 500 MCM (STR) - CU Splice (2)
  • 600 MCM (STR) - 400 Pin Size (2)
  • 750 MCM (STR) - 500 Pin Size (2)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Abrasion Resistant;Fire and Chemical Resistant (2)
  • Abrasion Resistant;Oil Resistant (2)
  • Accepts (2) 14 To (4) 10 AWG MC/AC Cable, 5/16 In and 3/8 In Flexible Conduit (2)
  • Accomodates Stranded cable, With Inspection window, Long barrel (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 1-3/4 IN;Vinyl-Impregnated Cloth Construction Provid (2)
  • Adhesion: 45 OZ/IN Width Ultimate;Features: Identify Junction Boxes, Switches, Circuit Breakers,Raceways, Pipe And Fuse Boxes;High-Adhesion Properties With Easy Removability;Non-Conductive For User Safety;Non-Smear, Black Legend On Bright Orange BackgroundFor High Visibility;Resist Abrasion, Moisture, Dirt And Oil;Temperature Range: -40 DEGF To 180 DEGF (-40 DEGC To 82 DEGC) Adhesion: 45 Oz/IN Width Ultimate;Temperature Range: -40 to 180 DEG F;Text Size: 3/4 IN;Vinyl-Impregnated Cloth Construction Provides (4)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Aluminum-to-Copper Connector Provides a Secure Connection While Preventing Aluminum Corrosion (3)
  • Barrel Style Butted (4)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper pressure bar. Bolt and nut of hex design (2)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (13)
  • Bolt and pressure bar of copper alloy, completely tin plated for corrosion resistance. Contoured spacer of electrolytic copper (6)
  • Classic Fin Design Provides Secure Grip For Extra Leverage On Maximum Wire Combinations (7)
  • CLIP,CONDUIT, (4)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (5)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Compact Design (3)
  • Connecting Conductors to Various Sizes of Tapped Hole;Suitable for Direct Burial in Earth or Concrete (3)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Prefilled with Oxide Inhibitor to prevent oxidation and keep out moisture. All Splices are color coded and marked with strip lengths, installation die codes and compression locations, providing easy identification for easy installation (11)
  • Constructed from Aluminum for High Conductivity. Solid Center Barriers and large Chamfers for easy cable insertion. Tough Stabilized nylon sleebes resist installing tool Pressure and provide Reliable 600 V Insulation. Prefilled with Oxide Inhibitor to prevent Oxidation and keep out moisture. All Splices are Color Coded and Marked with trip lengths, Installation Die Codes and Compression Locations, Providing easy Identification for easy Installation. Splices have Colored End Caps to make Identification (7)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (56)
  • Corrosion Resistant (3)
  • Degree of protection: IP20 (5)
  • Designed for Making Ground Connections and Bonding Non-Metallic Sheathed Cable (2)
  • Detectable by metal detectors, X-ray equipment, or visual detection (3)
  • Drop wire may be cut to exact length for adjustments in drop wire sag. Can be attached to bare neutral at any point in the span. Flexible and rigid bails grip ACSR, AAC and AAAC Conductors (3)
  • Dual Barrel Provides Termination of two Conductors;High Strength (2)
  • Easy Entry Copper Insulation Sleeve (2)
  • Easy Installation - no special tools required (8)
  • Easy Installation;No Special Tools Required (21)
  • Easy Roll-On Way To Insulate And Seal Cable - Made Of EPDM Elastomer (2)
  • Electro-Tin Plated (3)
  • Electro-Tin Plated for Low Contact Resistance (6)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Excellent for Grounding and Continuous loop Applications;Made of 6061T-6 Aluminum Alloy (2)
  • Excellent Moisture Sealant (2)
  • Exceptional Wire-Range Capacity Three Models Handle Wire Combinations From as Small as 22 AWG to as Large as 6 AWG (4)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • E-Z-Ground&reg, connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • E-Z-Ground® connectors are designed for direct burial and offer a safe, efficient alternative to exothermic welding products (2)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (3)
  • Features: 12 Gauge Steel, Rust Inhibitor, Finger Friendly (5)
  • Features: All Splicer/Reducers Are Dual Rated For Use With Aluminum And Copper Conductors And Are Constructed From High Strength, Tin Plated Aluminum, PENTROX Oxide Inhibiting Joint Compounds Are Recommended For All Aluminum Applications, All Connectors Are Tin-Plated: Provide Low Contact Resistance And Prevents Galvanic Corrosion, Connectors Feature Rounded Bottoms: Facilitates Taping, Solid Center Barrier: Prevents Contact Of Dissimilar Metals, Large Screw Diameters: Ensures Greater Surface Contact With (2)
  • Features: All-Aluminum Electro-Tin Plated design eliminates possible bi-metallic corrosion and provides shortest connector length design possible for easy installation in equipment with limited space. Solid electro-tin plated aluminum plug makes properly connection easily. Smooth surface on the solic EC plug provides greater area contact establishing excellent conductivity. Solid plug has equivalent cross-sectional area as current carrying equivalent copper wire permitting use of larger aluminum wire to co (2)
  • Features: Any Head Style Screw can be Used (5)
  • Features: Continuous Thread Allows for Take up Adjustment, Machine Bolt (15)
  • Features: Corrosion and Chemical Resistant (3)
  • Features: Corrosion Resistant, Stainless can be Mildly Magnetic (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: General Purpose Cable Tie For Every Day Bundling And Cable Management;UL Recognized (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: HYLUG Type YAV Is A Seamless, Heavy Duty Uninsulated Compression Terminal Manufactured From Electrolytic Copper And Is For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, The Seamless Tubing Produces A Double Thick Tongue And Seamless Barrel Design Provides A Strong Connector For Demanding Applications Requiring High Reliability, Applications Include Aircraft, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To V (2)
  • Features: Includes Drill, Hex Head Slotted (4)
  • Features: Includes Hex Nut (4)
  • Features: Made Of Tin-Plated Cast Copper Alloy, It Accommodates Either One Or Two Conductors, Copper Or Aluminum Cable, In Addition To A Low Profile Head With A Deep Phillips Recess, The Galvanized Steel Bolt Has A Ribbed Neck Which Prevents Rotation During Installation When Installed In A 0.44 Diameter Hole, When Used On Aluminum Conductor, The Cable Must Be Scratch Brushed And PENETROX A Joint Compound Must Be Used On Cable And Connector, UL467 Listed For Copper Conductor Only, Suitable For Direct Burial (3)
  • Features: Manufactured with Filtered Nylon 6/6, Angled Tail, One Piece Design, Transition Rails, And 3 Tooth Pawl, Rounded Edges, Finger Grips, Bulk Available (2)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Features: Provides a Large Load Bearing Surface (7)
  • Features: Range-Taking Connector: Lowers Inventory Requirements, Compact Size: Easy To Tape And Insulate Connection, Manufactured From High Conductivity Wrought Copper: Provides Low Resistance And Excellent Electrical Conductivity, Economical: Provides Low Installed Cost, 8A - Use CRIMPITS Accommodating 6 Stranded Copper, 6A - Use CRIMPITS Accommodating 4 Stranded Copper, 4A - Use CRIMPITS Accommodating 2 Stranded Copper, 2A - Use CRIMPITS Accommodating 1/0 And 2/0 Copper, Use PUADP-1 Adapter When Using U (2)
  • Features: Reusable Six Compartment Box, Handy Assortment (2)
  • Features: Silicon Bronze Harder than Brass, Marine use and High Resistance to Extreme Temperatures (4)
  • Features: The INSULUG Type YAEV-L Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Te (2)
  • Features: Tin-Plated, High Strength Copper Alloy SERVIT With Spacer, Spacer Separates Dissimilar Conductors And Provides Long Contact Length That Prevents High Pressure Point Contacts Between Run And Tap Conductors, Use Of PENETROX Joint Compound Recommended With Aluminum And ACSR, Conductor Type: Run: ACSR, 5005, AAAC, Commercial Stranded Aluminum, Commercial Stranded And Solid Copper, Tap: ACSR, 5005, AAAC, Commercial Stranded Aluminum, Commercial Stranded And Solid Copper, Steel (Nominal Diameter), Inst (5)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available;Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating (3)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Features: UL Listed 90 DEG C, 600 V To 35 KV 45 DEG, 90 DEG Angles Are Available, Tools, Die Set Catalog Number, And (number Of Crimps): MD6, OUR840, MD7-34R Mechanical: W26VT (2), W26RT (2), X26RT (2),BCT500HS, Y500CTHS Hydraulic: W26VT (2),W26RT (2), X25RT (2), X26RT (2), Y35, Y39, Y750, Y46, PAT750 Hydraulic:U26RT (1), Dieless: MY29-3 (1), MY29-11 (1), MRC840 (2), Y644HS (1), Y81KFT (1), Y81KFTMBH (1), PAT81KFT-18V (1), Wire Strip Length: 1 IN, Conductor Type: Commercial Stranded Copper, Tongue Angle: S (2)
  • Features: Use With Wider Cable Such As ROMEX® , NM And UF; High-Grade Carbon Steel Construction; Sharp Point Legs Drive Straight Without Splitting Wood; Resist Rust And Corrosion (4)
  • Features: Water-Tight Seal (2)
  • Features: Wedge Anchors can be Installed through the Fixture, Full Thread (4)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Ferrules ensure reliable electrical connections when terminating conductors in screw clamp terminal blocks (10)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (8)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (17)
  • Fixed;Square-Wire Spring Creates its Own Threads Maintains a Secure Positive Grip That Will Not Relax Over Time (6)
  • Flame Retardant (10)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 15 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 25 Lb (3)
  • Flange Thickness 5/16 To 1/2 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (2)
  • Flange Thickness 5/16 To 1/2 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • For aluminum and copper concentric conductors and compact code aluminum strandings (12)
  • For Aluminum;Copper Concentric Conductors;Compact Code Aluminum Strandings (3)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For copper-to-copper, copper-to-aluminum and aluminum-to-aluminum applications (insulated conductor only). Performs as splice or tab for non-tension applications up to 600 volts, depending on size of connector (3)
  • For Cross Connections in The Bridge Shaft (3)
  • For Power Connector Applications up to 35KV (2)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Fully Insulated. Metal Insulation Sleeve. Molded Insulator. Internal Barrel Serrations. Funnel Entry. (2)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (8)
  • Harsh (2)
  • Heat Shrink (11)
  • Heavy-Wall Cable Sleeve;For Electrical Splices;Connections;For Indoor, Outdoor or Overhead Use;Direct Buried or Submersible;Insulating Secondary Splices;Relocation of Service;Dig-In Repairs;Sheath Repairs (8)
  • Helps reduce drop wires by up to 66% (2)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (11)
  • High Strength Solderless Service Connector (7)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (3)
  • Indoor/Outdoor (4)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Installs with standard wrenches (4)
  • Invincibox up to 1/2 IN;Steel - general use (4)
  • Large brass contacts, polycarbonate connector housing (2)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (7)
  • Long Barrel (9)
  • Long Barrel Maximizes Number of Crimps and Provides Premium Wire Pull-Out Strength and Electrical Performance (7)
  • Long Barrel;High Conductivity (25)
  • Low profile head is designed to prevent snags on uneven surfaces and easier to pull through bulkheads. Non-magnetic stainless steel locking device insures both maximum strength and the right tightness every time (18)
  • Made from Heavy Wall, Extruded, High Conductivity Copper;For Power Connector Applications up to 35kv (6)
  • Made from high strength copper alloy to resist corrosion and provide premium electrical and mechanical performance (3)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made of High Copper Alloy;Re-usable (3)
  • Made of high-conductivity seamless copper tubing. Tin plated for corrosion resistance (2)
  • Marked with Die Index and Color Coded (2)
  • Material Flame Retardant Polypropylene (3)
  • Meets Cec and Nec Code Changes For Non-Residential Fluorescent Luminaires With Ballasts;Perfect For Oem or Retrofit Lighting Applications;Patented Push-In Technology Quickly Locks Wires In Place;Passes UL 2459 & CSA 182.3 Finger Probe Requirements;Fits Through 1/2 In. Knockout;Pieces Pull Apart Safely and Easily;3/8 In. Strip Length Indicator;Thumb Ridges Provide Superior Grip;Model:102 (2)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • No-Twist Connection Reduces Repetitive Motion Fatigue (7)
  • Pre-insulated for fast, easy installation of large home or commercial service entrances. Concave polyethylene end caps seal out dirt, but are easily pierced when inserting conductor (6)
  • PVC Insulation Eliminates Insulation Failures and Reduces Outage Costs;Removable Port and Screw Plugs (2)
  • Recommended screw driver: 4 mm (2)
  • Rigid (2)
  • Robust spring design for high performance holding power (6)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Specially Designed Contour Wings Provide a Secure Grip for Extra Levarage (7)
  • Specifically Created For The Residential Markets;The T/R+ Replaces The Yellow;Tan and Red Connectors In The Majority Of Field Applications (2)
  • Splices large conductors required for commercial service, use as low cost reducing sleeve. All sizes can be installed with popular mechanical and hydraulic tools. Center stop assures proper conductor positioning. Quick identifications with color-coded foil caps (12)
  • Splices Large Conductors Required for Commercial Service;Use as Low Cost Reducing Sleeve;All Sizes can be Installed with Popular Mechanical and Hydraulic Tools;Center Stop Assures Proper Conductor Positioning;Quick Identifications With Color-Coded Foil Caps (3)
  • Split-Bolt Has Free-Running Threads and Easy to Grip Wrench Flats;Highly Resistant to Season Cracking and Corrosion;High Strength (5)
  • Standard Barrel;High Conductivity (20)
  • Static Load Capacity 100 Lb (2)
  • Static Load Capacity 100 Lb (Vertical), 25 Lb (Horizontal), Clearance Hole For 1/4 In Bolt (3)
  • Static Load Capacity 160 Lb (2)
  • Static Load Capacity 160 Lb, Flange Thickness 1/8 To 1/4 In, With Thread Impression (2)
  • Static Load Capacity 25 Lb (3)
  • Static Load Capacity 50 Lb (Vertical), 25 Lb (Horizontal), Attaches To 1/8 To 3/8 In Flanges, #12 Wire To 1/4 In Plain/Threaded Rod (2)
  • Steel Crimp Sleeves - 100 Pcs Blister (2)
  • Suitable for Damp Locations (2)
  • Suitable to Mark Electrical Wires and Terminal Strips Quickly (4)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (9)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (6)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Three splices (3)
  • Tin Plated to Inhibit Corrosion, Color Coded Barrel, Inspection Window, Beveled Wire Entry (3)
  • Tin-Plated to Inhibit Corrosion (12)
  • Tin-Plated to Inhibit Corrosion;Compact Design (5)
  • Top entry wire connection (2)
  • Two Breakouts (3)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (25)
  • UL Listed 90 DEG C, 600 V - 35 KV,Tongue Angle: Straight (4)
  • Unique Construction Of The Female Disconnect Offers Long-Term Dependability. Brazed Seam Serrated Barrel Provides Maximum Tensile Strength. (3)
  • Uniquely designed pressure bar and notched v-bottom collar provide vise-like grip between conductor and terminal (3)
  • Universal terminal, These dual-rated panelboard lugs are constructed from high strength extruded aluminum alloy and electro tin-plated to provide low contact resistance (2)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Width 1-5/8 In, Bolt Size 1/2 In (2)
  • Width 1-5/8 In, Bolt Size 3/8 In (3)
  • Show More...

• Operating Temperature Range

  

  • -40 to +130 °C;-40 to +260 °F (5)
  • Maximum of +105 °C;+221 °F (3)
  • Maximum of +90 °C (17)
  • Show More...

• Overall Length

  

  • 0.205 in (2)
  • 0.244 in (4)
  • 0.571 in;14.5 mm (3)
  • 0.780 in (5)
  • 0.80 in;20.3 mm (2)
  • 0.87 in;22.098 mm (2)
  • 0.899 in (2)
  • 0.97 in (6)
  • 0.986 in (2)
  • 1 in (4)
  • 1 in;25.4 mm (4)
  • 1.03 in (2)
  • 1.06 in (3)
  • 1.09 in (3)
  • 1.12 in (2)
  • 1.13 in (4)
  • 1.153 in (2)
  • 1.16 in (5)
  • 1.16 in;29.5 mm (2)
  • 1.31 in (3)
  • 1.38 in;35.1 mm (2)
  • 1.47 in (4)
  • 1.47 in;37 mm (2)
  • 1.47 in;37.3 mm (3)
  • 1.5 in (2)
  • 1.50 in (4)
  • 1.516 in;38.5 mm (3)
  • 1.54 in (2)
  • 1.55 in;39.4 mm (2)
  • 1.62 in (2)
  • 1.65 in (3)
  • 1.75 in (3)
  • 1.752 in (2)
  • 1.81 in (2)
  • 1.831 in;46.5 mm (4)
  • 1.84 in (2)
  • 1.88 in (2)
  • 1.913 in (2)
  • 1.93 in (3)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 2 in (8)
  • 2.03 in (3)
  • 2.10 in (2)
  • 2.18 in (2)
  • 2.25 in (4)
  • 2.60 in (2)
  • 2.63 in (2)
  • 2.677 in (2)
  • 2.68 in (2)
  • 2.9 in (4)
  • 2-25/32 in (5)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 3 in (2)
  • 3.18 in (2)
  • 3.25 in (3)
  • 3.5 in (3)
  • 3-3/16 in (2)
  • 4 in (7)
  • 4-1/4 in (2)
  • 4-3/16 in (2)
  • 5.5 in (7)
  • 5.83 in (2)
  • 6.38 in (2)
  • 8 in (2)
  • Show More...

• Overall Width

  

  • 0.01 in (2)
  • 0.161 in (2)
  • 0.197 in (2)
  • 0.201 in;5.1 mm (4)
  • 0.311 in;7.9 mm (2)
  • 0.339 in (2)
  • 0.520 in (2)
  • 0.717 in (2)
  • 0.720 in (2)
  • 0.820 in (2)
  • 0.906 in (4)
  • 1.04 in (4)
  • 1.33 in (5)
  • 1.71 in (4)
  • 2.9 in (7)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Butt Splice (3)
  • Compression (38)
  • Compression Lug (3)
  • Compression;Crimp (22)
  • Crimp (6)
  • Disconnect Terminal (7)
  • Feed-Through Terminal (6)
  • Female Disconnecter (3)
  • Fork Terminal (18)
  • Insulation Displacement Connector (3)
  • Push-In (3)
  • Ring Terminal (9)
  • Ring Tongue (7)
  • Screw (68)
  • Splice Connector (4)
  • Split (29)
  • Spring (2)
  • Tension (2)
  • Tongue (38)
  • Twist-On (11)
  • Winged (10)
  • Wire Terminal Disconnect (2)
  • Show More...

• Overall Height

  

  • 0.380 in (5)
  • 0.570 in (2)
  • 0.697 in (2)
  • 0.81 in (5)
  • 0.866 in (2)
  • 1.016 in (2)
  • 1.043 in (2)
  • 1.142 in (2)
  • 1.252 in (4)
  • 1.85 in (2)
  • 2.205 in;56 mm (2)
  • 2.34 in (4)
  • 2.362 in;60 mm (3)
  • 2.5 in (2)
  • 2.62 in (4)
  • 3.13 in;79.5 mm (3)
  • 3.25 in (7)
  • Show More...

• For Use With

  

  • #22 to #12 AWG Solid;Stranded Wire (3)
  • 1-Ballast Fixture New Installations and Retrofits (2)
  • 35 mm Rail (2)
  • Air Handling Space (4)
  • Air Handling Space;Outdoor (5)
  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • All Aluminum Applications (2)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (11)
  • Aluminum/Copper Code Conductor (3)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Bricks (2)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper and Aluminum Conductor (19)
  • Copper Cables;Aluminum Cables (6)
  • Copper Code Conductors (8)
  • Copper Conductor (44)
  • Copper or Aluminum Conductors (2)
  • Copper Wire (3)
  • Direct Burial Applications in Earth or Concrete (2)
  • Flexible, Extra-Flexible, and Code Stranded Copper Conductors (3)
  • Flexible;Extra-Flexible;Code Stranded Copper Conductors (5)
  • For Combinations of Aluminum-to-Aluminum Conductors;Aluminum-to-Copper Conductors (3)
  • For Copper to Copper Connections;For Grounding of Steel Structures;Transformers using one or two Cables;For Tapping one or two Cables from Bus Bar (8)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Gas or Electric Heating Device (2)
  • Greater than 2000 Volts Consult Cable (3)
  • Grounding and Bonding;Direct Burial in Earth or Concrete (8)
  • Grounding two Copper Code Conductors to Steel Structures;Busbars;Transformers (3)
  • Hydraulic Tool (9)
  • Overhead Tension Connection (2)
  • Splicing Two Copper or Aluminum Wire (2)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (10)
  • Standard Conductors (5)
  • Stranded Aluminum or Copper Code Conductors (7)
  • Stranded Copper Conductors (24)
  • Temporary Connections to Male Disconnects and Terminal Blocks. (2)
  • Terminate;Splice (2)
  • Terminate;Splice;Tap Power Connectors (18)
  • Wire Termination (21)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (15)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Wireless Network: Infrastructure Accessories (2)
  • Show More...

• Maximum Voltage Rating

  

  • 1000 V (4)
  • 2000 V (3)
  • 300 V (9)
  • 35 kV (93)
  • 400 V (2)
  • 550/600/800 V (2)
  • 600 V (128)
  • 600 V (Building Wire);1000 V (Maximum Signs/Lighting Fixture) (8)
  • 600 V ac (78)
  • 600 V;1000 V (Lighting Fixture/Luminaries/Sign) (6)
  • 600/700/800 V (7)
  • 800 V (6)
  • Show More...

• Package Quantity

  

  • 1 (2)
  • 1 BG;5 CT (4)
  • 1 ct (24)
  • 1 CT;10 PK (10)
  • 1 CT;100 PK (8)
  • 1 CT;12 PK (2)
  • 1 CT;150 PK (2)
  • 1 CT;20 PK (2)
  • 1 CT;25 PK (5)
  • 1 CT;3 PK (5)
  • 1 CT;30 PK (3)
  • 1 CT;300 PK (2)
  • 1 CT;5 PK (6)
  • 1 CT;50 Pk (4)
  • 1 CT;6 Pk (4)
  • 1 CT;60 Pk (2)
  • 1 Pc (2)
  • 1 PK (4)
  • 10 CT (4)
  • 10 CT;100 PK (19)
  • 10 CT;50 PK (4)
  • 10 PK (15)
  • 100 BG (11)
  • 100 BX (22)
  • 100 CT (48)
  • 100 CT;1000 PK (3)
  • 100 CT;400 PK (4)
  • 100 CT;500 PK (7)
  • 100 CT;600 PK (6)
  • 100 CT;800 PK (5)
  • 100 JR (9)
  • 100 PC (7)
  • 100 PK (12)
  • 100 Pouch;1 CT;1000 PK (4)
  • 1000 BX (2)
  • 1000 CA (6)
  • 1000 CT (2)
  • 1000 CT;10000 PK (11)
  • 1000 CT;5000 PK (3)
  • 1000 PK;100 CT (3)
  • 10000 PK;100 CT (2)
  • 10000 PK;1000 CT (8)
  • 12 CA (6)
  • 12 CT (11)
  • 12 CT;120 PK (6)
  • 12 PK (2)
  • 12 PK/CT;100 PK (3)
  • 12 PK/CT;50 PK (2)
  • 15 PK (10)
  • 1800 CT (2)
  • 2 CT (5)
  • 20 PC (2)
  • 200 CT (2)
  • 200 CT;2000 PK (2)
  • 24 CT (2)
  • 240 CT (2)
  • 25 BG (14)
  • 25 CA (2)
  • 25 CT (11)
  • 25 CT;100 PK (2)
  • 25 CT;125 PK (2)
  • 25 CT;150 PK (2)
  • 25 CT;250 PK (21)
  • 25 PK (15)
  • 250 CT (2)
  • 25000 PK;100 CT (3)
  • 3 CT (17)
  • 3 CT;30 PK (2)
  • 300 JR (3)
  • 4 CT (8)
  • 5 CT;50 PK (2)
  • 50 BG (2)
  • 50 BX (3)
  • 50 CT (31)
  • 50 CT;200 PK (2)
  • 50 CT;500 PK (17)
  • 50 PC (3)
  • 50 PK (24)
  • 50 PK;500 CT (2)
  • 500 BG (10)
  • 500 BX (2)
  • 500 CT;5000 PK (15)
  • 500 JR (3)
  • 500 Jug (2)
  • 500 PK;50 CT (6)
  • 5000 CA (2)
  • 5000 PK;100 CT (11)
  • 5000 PK;1000 CT (2)
  • 6 CT (23)
  • 6 CT;60 PK (5)
  • 6 PK (4)
  • 6 PK/CT;100 PK (5)
  • 75 CT (2)
  • Show More...

• Weight

  

  • 0.0003 lb (2)
  • 0.0006 lb (4)
  • 0.001 lb (2)
  • 0.0025 lb (3)
  • 0.003 lb (8)
  • 0.0037 lb (3)
  • 0.004 lb (7)
  • 0.005 lb (11)
  • 0.006 lb (8)
  • 0.01 lb (56)
  • 0.01 LB (Each) (2)
  • 0.01 lb/EA (10)
  • 0.011 lb (2)
  • 0.02 lb (21)
  • 0.02 lb/EA (22)
  • 0.03 lb (10)
  • 0.03 lb/EA (15)
  • 0.04 lb (6)
  • 0.04 lb/EA (11)
  • 0.05 lb (2)
  • 0.05 lb/EA (11)
  • 0.06 lb (3)
  • 0.06 lb/EA (14)
  • 0.07 lb (4)
  • 0.07 lb/EA (6)
  • 0.08 lb (4)
  • 0.08 lb/EA (16)
  • 0.09 lb (3)
  • 0.09 lb/EA (10)
  • 0.1 lb (2)
  • 0.1 lb/EA (6)
  • 0.11 lb (6)
  • 0.11 lb/EA (2)
  • 0.12 lb (3)
  • 0.12 lb/EA (6)
  • 0.13 lb (4)
  • 0.13 lb/EA (15)
  • 0.14 lb/EA (3)
  • 0.15 lb (5)
  • 0.15 lb/EA (4)
  • 0.16 lb/EA (4)
  • 0.17 lb/EA (5)
  • 0.18 lb (3)
  • 0.19 lb (2)
  • 0.19 lb/EA (9)
  • 0.2 lb (5)
  • 0.21 lb (2)
  • 0.21 lb/EA (2)
  • 0.22 lb (4)
  • 0.22 lb/EA (2)
  • 0.25 lb/EA (3)
  • 0.26 lb (3)
  • 0.26 lb/EA (4)
  • 0.28 lb/EA (4)
  • 0.3 lb (2)
  • 0.3 lb/EA (3)
  • 0.31 lb/EA (3)
  • 0.34 lb (3)
  • 0.35 lb/EA (3)
  • 0.37 lb (2)
  • 0.37 lb/EA (2)
  • 0.38 lb (2)
  • 0.41 lb (2)
  • 0.41 lb/EA (2)
  • 0.44 lb (2)
  • 0.45 lb/EA (3)
  • 0.46 lb (2)
  • 0.53 lb/EA (2)
  • 0.55 lb/EA (2)
  • 0.59 lb/EA (2)
  • 0.6 lb (2)
  • 0.62 lb/EA (2)
  • 0.64 lb (2)
  • 0.65 lb (2)
  • 0.67 lb (2)
  • 0.7 lb/EA (2)
  • 0.72 lb (2)
  • 0.79 lb/EA (2)
  • 1 lb (3)
  • 1 lb/EA (27)
  • 1.48 lb (2)
  • 1.49 lb (3)
  • 1.87 lb/EA (2)
  • 10 lb (3)
  • 2 lb/EA (2)
  • 2.11 lb (2)
  • Show More...

• Application

  

  • Appliances;Fixtures;Automotive;Marine;Commercial Construction;Industrial Construction;Irrigation;Residential Construction (2)
  • Applications certified to 600 V and recommended up to 35 kV¥ (25)
  • BALL-TYPE SWIVEL FIXTURE COVERS FOR PENDANT MOUNTED FIXTURES (2)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Bricks (5)
  • Cable Tie Entry from All Four Sides, Used with Miniature, and Intermediate Cables Ties;Indoor (2)
  • Cable ties are primarily used to cinch wires and cables together to form a neat and organized bundle (11)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (26)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (22)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (4)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (4)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (3)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Construction;Industrial;Military (9)
  • Datacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketDatacenters - Datacenters - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherIn (2)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (8)
  • Datacom and Low Voltage;Electrical Fixing and Fastening (3)
  • Dead-End Self-supporting Drop Wire (3)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (45)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (5)
  • Electrical Labeling;Wire and Cable Labeling (11)
  • For All Combinations Of Copper, Aluminum, ACSR, AAAC, 5005, And Steel (8)
  • For Aluminum And Copper Conductors (15)
  • For Buchanan C24 Crimp Tool And Designed For Fast, Permanent, Pressure-Type Connections (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (10)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (15)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors. Use as a low tension reducing sleeve for Insulated Conductor (6)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (6)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (11)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (5)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (3)
  • For Direct Burial Applications In Earth Or Concrete, Copper (7)
  • For Direct Burial Cables (4)
  • For Direct Burial In Earth And Concrete (2)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (6)
  • For Dry Locations (4)
  • For Dry Locations;Insulating and protecting wires and cables (15)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (2)
  • For Grounding And Bonding Applications (5)
  • For hanging rod (2)
  • For high temperature applications over 105 degree C (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (14)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (2)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (2)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Making Tap Or Parallel Copper Connections (2)
  • For quickly connecting or disconnecting a terminal (3)
  • For Standard Conductor Splice (12)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (13)
  • For Use With Copper And Aluminum Conductors (4)
  • For use with SNA terminal blocks (2)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (19)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • General Purpose (18)
  • General Use (2)
  • Grounding and Bonding Applications (9)
  • Grounding Application (3)
  • Grounding Wire (8)
  • Ind Facilities & Factories - Facility - Other (3)
  • Indoor (7)
  • Indoor;Outdoor (8)
  • Indoor;Used with Miniature, Intermediate, and Standard Cables Ties (5)
  • Industrial Spec Grade (2)
  • Industrials, Hospitals, Utilities, Marine, Computer (2)
  • Insulate Moisture-Seal;Pad Connections Up to 600 V;Indoor;Outdoor (2)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (39)
  • Insulating or Joining 2 or more conductors (19)
  • Marking Wire and Cable (4)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (2)
  • Non-Indicating (2)
  • NSI (19)
  • Other (37)
  • Overhead Tension Connection (2)
  • Poured Concrete, Prestressed Concrete, Cinder Block, Brick, Mortar (4)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (5)
  • provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. (3)
  • Residential and commercial wiring jobs (6)
  • Splicing Wire (35)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (27)
  • Stranded Aluminum or Copper Code Conductor (8)
  • Terminate, Splice, Tap Power Connectors (157)
  • Terminate-Splice-Tap (3)
  • type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire (2)
  • Used for Coaxial Cable, Bell Wire, Thermostat Wire, Telephone Wire and Romex(R) (4)
  • Used to position the grounding plate on a threaded rod prior to placement of the concrete. (2)
  • Utility/Ground Grid (13)
  • Wire Splice (2)
  • Wire Splicing (2)
  • Wire Termination (241)
  • Show More...

• Poles

  

  • 1 (191)
  • 2 (1)
  • 3 in (2)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (30)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (32)
  • BOX SUPPORT (10)
  • CABLE & PIPE TRANSITS (20)
  • CADDY (STRAPS ONLY) (17)
  • Comp & Mech Lugs and Butt Splices (534)
  • CONDUIT HANGERS/STAND OFF STRAPS (5)
  • Datacom Wiring Devices and Accessories (19)
  • DISCONNECTS (4)
  • EXOTHERMIC GROUNDING PRODUCTS (5)
  • FASTENERS (11)
  • Fuses & Fuse Accessories (18)
  • HAND TOOLS (7)
  • HEAT/COLD SHRINK (82)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (3)
  • MISC FITTINGS (7)
  • Printers and Labeling (8)
  • SAFETY PRODUCTS (4)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (157)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (90)
  • SPLICE KITS (83)
  • SPLIT BOLTS (242)
  • SPRING NUTS & TWIRL NUTS (3)
  • T&B C TAP LUGS (36)
  • TAPE (19)
  • TERMINAL BLOCK ACESSORIES (46)
  • TERMINAL BLOCKS POWER DIST BLOCKS (106)
  • TERMINALS (157)
  • THREAD RODS (2)
  • TRANSFORMER ACCESSORIES (1)
  • WIRE LUBE, MARKERS, & TIES (47)
  • WIRE NUTS (107)
  • Show More...

• Color

  

  • Aluminum (18)
  • Black (174)
  • Blue (89)
  • Blue/Gray (2)
  • Brown (62)
  • Chromated steel (2)
  • Clear (21)
  • Colorless (3)
  • Copper (24)
  • Gray (73)
  • Gray 0 (7)
  • Green (33)
  • GREEN/YELLOW (14)
  • Grey (2)
  • Grey / Dark grey (2)
  • Ivory (15)
  • Metallic (20)
  • Miscellaneous (2)
  • Natural (8)
  • OLIVE (3)
  • Orange (27)
  • Pink (27)
  • Polished Silver (4)
  • Purple (26)
  • Red (84)
  • Red/Tan (3)
  • RUBY (3)
  • Silver (3)
  • Steel (2)
  • Tan (13)
  • Tin Plated Copper (12)
  • Various (3)
  • White (48)
  • Yellow (67)
  • Show More...

• Stud Size

  

  • #10 (3)
  • 1/2 (62)
  • 1/2 in (20)
  • 1/4 (55)
  • 1/4 in (9)
  • 3/8 (54)
  • 3/8 in (10)
  • 5/16 (9)
  • 5/8 (2)
  • Show More...

• Minimum Qty

  

  • 10 (1)
  • 100 (161)
  • 1000 (8)
  • 150 (4)
  • 20 (2)
  • 200 (3)
  • 25 (10)
  • 250 (10)
  • 300 (3)
  • 350 (1)
  • 50 (54)
  • 500 (38)
  • 750 (2)
  • Show More...

• Housing Material

  

  • Aluminum (85)
  • Aluminum Alloy-Tin Plated (4)
  • Copper (22)
  • PHENOLIC (3)
  • Thermoplastic (5)
  • Tin Plated Copper (6)
  • Show More...

• Wire Type

  

  • Al/Cu (4)
  • ALUMINUM/COPPER (5)
  • B,C,D,K,M,I (12)
  • Class A & B (33)
  • Class B & C (83)
  • COPPER (19)
  • CU Wire Only (25)
  • SOLID (1)
  • Solid, Stranded, Stranded (Tin Bonded) (11)
  • STRANDED (1)
  • Show More...

• Finish

  

  • #4 Polished Finish (4)
  • Acrylic (3)
  • Aluminum (18)
  • blank (8)
  • Caddy?® Armour (15)
  • CADDY® ARMOUR (2)
  • Ceramic Coated Blue (4)
  • COPPER (29)
  • Electro -Tin Plated (4)
  • ELECTROGALVANIZED (2)
  • EPDM Rubber Insulated (8)
  • Graphite Metallic (4)
  • Matte (15)
  • Nickel Plated (4)
  • nVent CADDY Armour (3)
  • NYLON (2)
  • Plastisol (2)
  • Plastisol Insulated (81)
  • POLISHED (1)
  • Polycarbonate (3)
  • Polypropylene (2)
  • STAINLESS STEEL (1)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (30)
  • Tin Plated (152)
  • Tin Plated Bronze (19)
  • Tin Plated Copper (9)
  • Tinned (51)
  • Tin-Plated (44)
  • Uncoated (3)
  • Untreated (3)
  • Zinc (3)
  • Zinc Phosphate (53)
  • Zinc Plated (65)
  • Zinc-Plated, Tin-Plated Steel Sleeves (2)
  • Show More...

• Temperature Rating

  

  • 105 C (16)
  • 105 DEG C (1)
  • 105 DEG C Shell Rated (11)
  • 131 TO 275 DEG F (1)
  • 150 DEG C (3)
  • 170 (4)
  • 194 (17)
  • 194° F (4)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (8)
  • 302 Degrees Fahrenheit (150 Degrees Celsius) (2)
  • 75 C (3)
  • 90 (4)
  • 90 C (101)
  • 90 DEG C (1)
  • 900 DEG F (1)
  • Show More...

• Mounting

  

  • 1 (4)
  • 1/2 Mounting Hole (16)
  • 1/2 Mounting Holes (25)
  • 1/4 Mounting Hole (8)
  • 1/4 Mounting Holes (7)
  • 1-1/16 (4)
  • 1-1/2 (2)
  • 1-1/4 (7)
  • 1-1/8 (18)
  • 1-11/16 (2)
  • 1-3/16 (2)
  • 15/16 (9)
  • 1-5/8 (5)
  • 1-7/16 (2)
  • 1-9/16 (6)
  • 2 Mounting Holes (12)
  • 2-5/16 (2)
  • 3/4 (3)
  • 3/8 Mounting Hole (20)
  • 5/16 (5)
  • 5/16 Mounting Hole (6)
  • 5/8 (8)
  • 5/8 Mounting Hole (2)
  • 7/16 (3)
  • 7/8 (9)
  • 9/16 (4)
  • 9/32 (9)
  • Adhesive Tape (10)
  • CHANNEL (10)
  • Clamp (3)
  • DIN 1-3 (2)
  • DIN 3 (2)
  • None (60)
  • One screw (2)
  • Screw-on (2)
  • Snap In Mount (2)
  • Switch (2)
  • Wooden Stud (5)
  • Yes (3)
  • Show More...

• Type

  

  • 2-Wire Standard Version (3)
  • Accessory (2)
  • Aluminum Double Lug (5)
  • Aluminum Lay-In Lug (4)
  • Aluminum Pin Adapters (2)
  • Aluminum Service Wedge Clamp (3)
  • Aluminum Single Lug (3)
  • Aluminum Splice (15)
  • Aluminum Split Bolts (4)
  • AMS, Dual Rated (3)
  • Anchor (2)
  • Automatic Tension Splice (2)
  • Beam fasteners (3)
  • Bi-Metallic Pin (3)
  • Bolted Lugs & Terminals (20)
  • Breatout Boot (3)
  • BUTT (1)
  • Butt Splice (3)
  • Butted (3)
  • Cable Connector (2)
  • Cable Tie (7)
  • Cable Tie Mount (13)
  • Cable/Conduit to Stud (2)
  • Clamp, Beam (2)
  • Clamps and Clips (2)
  • Cleaning Tools (2)
  • Cold Shrink Splice (11)
  • Compression Lug (85)
  • Compression Splice (6)
  • Compression Splice Service Entrance (49)
  • Compression Tap (15)
  • Conduit and Box Support Fastener (7)
  • Conduit and cable support (2)
  • Conduit fastener (4)
  • Conduit to beam fastener (20)
  • Conduit to conduit fastener (2)
  • Conduit to rod fastener (4)
  • Conduit to stud fastener (4)
  • Copper C Taps (3)
  • Copper Connectors (8)
  • Copper Split Bolts (12)
  • Covers (3)
  • Crimp Sleeve Wire Connectors (3)
  • C-Tap (5)
  • C-Taps (5)
  • DETECTABLE (3)
  • Disconnect (12)
  • Disconnect Connectors (3)
  • Double Primary (4)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Drop in Anchor (5)
  • Dual-Rated (5)
  • Dual-Rated Mechanical Connector (24)
  • Extra Heavy Duty (2)
  • Eye Bolt (4)
  • EZ, SELF DRILLING (1)
  • FENDER WASHER (10)
  • FIXTURE HANGERS MALLEABLE (2)
  • FLAT WASHER (11)
  • Full Thread Wedge Anchor (6)
  • GAR (16)
  • GAR-BU (2)
  • GB (3)
  • GBM (3)
  • GC (4)
  • GC-CT (3)
  • Gel Tap Splice Kits With Connector (2)
  • General Use (2)
  • Grounding Connector (4)
  • Hammer-On Flange Clips (2)
  • Hanger (4)
  • HEAT (1)
  • Heat-Shrink (19)
  • HEAVY DUTY (6)
  • Heavy Wall (16)
  • Hex Head Concrete Anchor System (4)
  • Hex Head Tap Bolt (15)
  • HIGH PERFORMANCE (18)
  • H-Type Compression Tap Connector (11)
  • IN LINE (2)
  • Inline (6)
  • Inline Splice (3)
  • IN-Line Splicer/Reducer (8)
  • INSULATED (2)
  • Insulated Conductor Connectors (3)
  • Insulation Displacement (12)
  • Insulation Piercing Connectors (3)
  • Intergrated Mounting Hole (2)
  • INTERMEDIATE (3)
  • KC and K2C Series (24)
  • KS (4)
  • KS, Compact (7)
  • KSU, Universal (8)
  • Label (3)
  • LOCKING (4)
  • Locking Fork Terminal (5)
  • Long Barrel (23)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (27)
  • Long Barrel - Two Hole (20)
  • Long Barrel, Skive, Tin Plated (3)
  • Long Barrel, Tin Plated (27)
  • MACHINE SCREW (1)
  • Machine Screw Kit (2)
  • Mechanical Grounding (12)
  • Mechanical Lug (9)
  • Mechanical Splicer/Reducer (3)
  • Mechanical Split Bolt Connector (15)
  • MINIATURE (2)
  • Molds (3)
  • Motor Lead Pigtail Splice (2)
  • MOUNTING BASE (1)
  • Multi Cable (13)
  • Multi-Purpose, Standard (2)
  • NAIL PLATE (1)
  • Natural (5)
  • Non-Metallic Cable Splices And Taps (3)
  • Nylon Fully Insulated Female Disconnect (2)
  • Nylon Insulated Butt Connectors (2)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Ring Terminal (7)
  • Offset Entry (3)
  • Offset Pin (10)
  • Panelboard Lug (5)
  • PIGTAIL (5)
  • Pigtail Splice (2)
  • Plug Tail Connector (2)
  • Polypropylene Insulated Ferrule (9)
  • Pre-printed Books (4)
  • Pre-Printed Wire Marker Book (4)
  • Purlin hanger (2)
  • Push In Clamps (3)
  • Push In Wire Connectors (3)
  • Push-In (11)
  • QT-III (6)
  • Rebar Clamp (2)
  • Rejacketing Sleeve (5)
  • Replacement Sleeves (3)
  • RING (2)
  • Ring Terminal (3)
  • Ring Tongue (4)
  • Rod and wire fastener (3)
  • Rod Coupling (5)
  • Rod to beam hanger (2)
  • Rod to Purlin (2)
  • Rod/Wire (6)
  • ROLL (1)
  • Roll-On Splice Kits (2)
  • ROOF FLASHING (2)
  • Secure Grip Wire Connectors (6)
  • Service Post Connectors (8)
  • Servie Entrance Sleeves (2)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (23)
  • Short Barrel - Two Hole (4)
  • Single (Thin) Wall (7)
  • Single Primary (3)
  • Single Sided Entry (22)
  • SLEEVE (12)
  • Solid Pin (11)
  • SPLICE (13)
  • Splice Cap (2)
  • Splice Connector (14)
  • Splice Kit (4)
  • Splicer/Reducer (5)
  • Split Lock Washer (2)
  • Split-Bolt (27)
  • Spring Nut (3)
  • SQUARE (2)
  • Square washer (5)
  • Stable (5)
  • STANDARD (4)
  • Standard Barrel (19)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Barrel, Tin Plated (29)
  • Standard Wire Connectors (8)
  • Submersible Pedestal Connectors (9)
  • TAB STYLE (1)
  • Tag (2)
  • Taps (4)
  • T-bar fastener and spacers (2)
  • Terminal Block (73)
  • Terminal block accessory (12)
  • Terminal block relay (5)
  • Terminal blocks (19)
  • Terminals (6)
  • Thin-Wall Flexible Polyolefin (2)
  • Tin Plated Copper Split Bolt (9)
  • Twist-On (20)
  • USS Flat Washer (2)
  • UV Resistant Black (6)
  • VINYL (2)
  • Vinyl Insulated Butt Splice (6)
  • Vinyl Insulated Female Disconnect (5)
  • Vinyl Insulated Fork Terminal (3)
  • Vinyl Insulated Locking Fork Terminal (8)
  • Vinyl Insulated Ring Terminal (8)
  • Voltage And Conduit, Large (2)
  • Voltage And Conduit, Medium (4)
  • WASHER (12)
  • Wide Range Tap Connectors (3)
  • Winged Wire Connectors (11)
  • WIRE (4)
  • Wire Connectors & Termination (2)
  • Wrap Around Gel Splice Kits (2)
  • YA-A (2)
  • YA-E (2)
  • YAEV-L, Heavy Duty (2)
  • YC-C Series (2)
  • YGF (2)
  • Show More...

• Wire Size

  

  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (3)
  • #18 AWG (2)
  • #24-16 AWG (2)
  • #24-8 AWG (3)
  • #26-10 AWG (11)
  • (3) #26-12 AWG (6)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 0.187 in Dia x 1 in W (4)
  • 0.187 in Dia x 1.75 in W (2)
  • 0.25 in Dia x 1.75 in W (2)
  • 0.38 (3)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (9)
  • 10 (8)
  • 10 AWG (1)
  • 12 (2)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (3)
  • 12 AWG (2)
  • 12-10 AWG (16)
  • 12-14 AWG (3)
  • 14 (3)
  • 14 AWG (1)
  • 16 AWG (2)
  • 16-10 AWG (2)
  • 16-14 AWG (3)
  • 18 (2)
  • 18-14 AWG (10)
  • 2 SOL - 2/0 STR (2)
  • 2/0-14 AWG (5)
  • 22 - 10 (5)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 22-16 AWG (7)
  • 250 MCM-6 AWG (14)
  • 3/0-6 AWG (12)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 350 TO 500 KCMIL (MAIN), 4 TO 4/0 AWG (TAP) (1)
  • 4 SOL - 1/0 STR (2)
  • 4-14 AWG (8)
  • 500 MCM-4 AWG (11)
  • 6 AWG (1)
  • 6 SOL - 1/0 STR (2)
  • 600 MCM-6 AWG (5)
  • 750-250 MCM (7)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (5)
  • # 2 AWG (STR) (9)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (8)
  • # 6 AWG (STR) (8)
  • # 8 AWG (STR) (6)
  • #12 to #6 AWG (2)
  • #2 to 4/0 AWG (2)
  • #8 to 1/0 AWG (2)
  • (2) 14 To (3) 10 AWG (2)
  • 1/0 AWG (3)
  • 1/0 AWG (STR) (6)
  • 1/4 in (2)
  • 1-1/2 INCH (1)
  • 12 AWG, 14 AWG (3)
  • 14 to 2, 12 to 2 (3)
  • 14 to 3, 12 to 3, 10 to 3 (2)
  • 2 AWG (6)
  • 2/0 AWG (5)
  • 2/0 AWG (STR) (5)
  • 250 MCM (STR) (6)
  • 3/0 AWG (3)
  • 3/0 AWG (STR) (7)
  • 3/8 in (2)
  • 300 MCM (STR) (2)
  • 350 kcmil (2)
  • 350 MCM (STR) (5)
  • 4 AWG (3)
  • 4/0 AWG (3)
  • 4/0 AWG (STR) (7)
  • 4/0-14 AWG (2)
  • 400 MCM (STR) (2)
  • 500 kcmil (3)
  • 500 MCM (STR) (6)
  • 6 AWG (5)
  • 600 kcmil (2)
  • 600 MCM (STR) (2)
  • 750 MCM (STR) (3)
  • 8 AWG (3)
  • 8-2 AWG (2)
  • NA (13)
  • Show More...

• Thickness

  

  • 0.02 (4)
  • 0.02 in;0.51 mm (2)
  • 0.025 (8)
  • 0.025 in;0.64 mm (5)
  • 0.03 (2)
  • 0.03 in;0.75 mm (2)
  • 0.035 (3)
  • 0.04 (3)
  • 0.04 INCH (2)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.1 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.05 in;1.2 mm (6)
  • 0.05 in;1.3 mm (8)
  • 0.05 in;1.31 mm (4)
  • 0.053 in;1.35 mm (8)
  • 0.055 in;1.4 mm (2)
  • 0.06 (2)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.062 in (2)
  • 0.075 in;1.91 mm (4)
  • 0.08 (2)
  • 0.08 in (6)
  • 0.085 in;2.15 mm (2)
  • 0.094 in (2)
  • 0.125 in (3)
  • 057 (2)
  • 1.13 in (2)
  • 1/16 (7)
  • 1/4 in (2)
  • 1/4 INCH (2)
  • 10 mil;0.25 mm (4)
  • 125 mil (2)
  • 3/32 (3)
  • 5/64 in (2)
  • Show More...

• Size

  

  • #10 (3)
  • #14 — #10 AWG Code STR, #12 — #10 AWG Code SOL (3)
  • #2 AWG Class B, C, G, H, I, K, M and DLO (2)
  • #2 AWG Class K and M and DLO (2)
  • #2 AWG Code (10)
  • #4 — #3 AWG Code STR, #2 AWG Code SOL (7)
  • #4 AWG Class B, C, G, H, I, K, M and #5, #4, #3 AWG DLO (3)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (8)
  • #6 AWG Code (9)
  • #8 AWG Class B, C, G, H, I, K, M and DLO (2)
  • #8 AWG Code (5)
  • 0.22 x 1.56 es (3)
  • 0.335 in H x 1 in W (4)
  • 0.335 in H x 1.75 in W (2)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 in (3)
  • 1 In (EMT), 3/4 In (IMC/Rigid) (2)
  • 1 In Conduit (4)
  • 1/0 AWG Class B, C, G, H, I, K, M and DLO (2)
  • 1/0 AWG Code (2)
  • 1/2 (2)
  • 1/2 in (2)
  • 1/2 In (EMT) (2)
  • 1/2 In, 3/4 In (3)
  • 1/2 In, 3/4 In Conduit (5)
  • 1/2 x 1 in (3)
  • 1/2-13 x 2 (2)
  • 1/4 In Threaded Rod (2)
  • 1/4 x 1/2 (2)
  • 1/4 x 3-1/4 (2)
  • 1-1/2 In Conduit (2)
  • 1-1/4 in (2)
  • 2 In Conduit (2)
  • 2 INCH (16)
  • 2/0 AWG Code (6)
  • 2-25/32 inch (12)
  • 250 kcmil Code (2)
  • 3.47 INCH L X 4 INCH W X 2.61 INCH H (1)
  • 3/0 AWG Code (2)
  • 3/16 x 1-1/4 (2)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (6)
  • 3/4" x 60ft (2)
  • 3/8 in (3)
  • 3/8 In Conduit (3)
  • 3/8 x 2-3/4 (2)
  • 3/8-16 x 1-9/16 (2)
  • 3-1/2 Inch (15)
  • 350 kcmil Code (2)
  • 4/0 AWG Class B, C, G, H, I, K, M and DLO (3)
  • 4/0 AWG Code (5)
  • 5 INCH L X 4 INCH W X 2.61 INCH H (1)
  • 500 kcmil Code (2)
  • 6 In (2)
  • 62.5x6x38mm (2)
  • 7/16 In Diameter (3)
  • 8.54 INCH L X 5.5 INCH W X 3.12 INCH H (1)
  • 8x59.7x45.6mm (2)
  • 9/16 in (2)
  • 9/16 In Diameter (2)
  • 9/16 x 1-1/4 in (2)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.25 - W=.906 - ID=.354 (2)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (4)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.50 - W=.490 - OD=.340 - ID=.250 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (2)
  • L=1.83 - W=.670 - OD=.470 - ID=.360 (2)
  • L=1.840 - W=1.870 - H=1.870 (2)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.36 - W=.900 - OD=.620 - ID=.490 (2)
  • L=2.36 - W=1.00 - OD=.690 - ID=.550 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.48 - W=1.09 - OD=.750 - ID=.590 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.90 - H=2.34 - W=1.04 (4)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.00 - H=2.62 - W=1.71 (4)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=5.50 - H=3.25 - W=2.90 (4)
  • Length 1-13/16 inch (3)
  • NA (5)
  • Splice 4 inch, Sleeve 5-1/2 inch (6)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Show More...

• Length

  

  • 0.25 (2)
  • 0.8 (3)
  • 1 (9)
  • 1 in (3)
  • 1.06 (2)
  • 1.25 (2)
  • 1.37 in (4)
  • 1.38 (3)
  • 1.38;34.9 mm (2)
  • 1.85 (17)
  • 1/2 in (6)
  • 11.08 in;284.4 mm (2)
  • 11.1 in;282 mm (2)
  • 11.77 in;299 mm (2)
  • 1-1/16 INCH (2)
  • 1-1/2 (3)
  • 1-1/4 (4)
  • 1-1/4 in (2)
  • 1-1/8 in (2)
  • 12-1/2 in (3)
  • 13.4 in;340 mm (3)
  • 14.2 in;360.5 mm (2)
  • 14.287 in;362.9 mm (2)
  • 14.6 in;371 mm (2)
  • 14.655 in;372.24 mm (2)
  • 144 (2)
  • 1-5/8 INCH (2)
  • 18 in;457 mm (2)
  • 2 (6)
  • 2 in (3)
  • 2.37 (2)
  • 2.5 in (2)
  • 2.75 (2)
  • 2-3/4 (4)
  • 3.25 (2)
  • 3.6 (2)
  • 3.62 in;91.95 mm (2)
  • 3.94 (2)
  • 3.94 in;100.08 mm (2)
  • 3/4 (2)
  • 3/4 in (2)
  • 3-1/4 (2)
  • 4 (3)
  • 4 ft (9)
  • 4 ft;1.2 m (2)
  • 4.5 (4)
  • 48 in;121.9 mm (5)
  • 5 (3)
  • 5.4 (3)
  • 5.51 in;140 mm (2)
  • 6 INCH (1)
  • 6.1 in (2)
  • 60 (2)
  • 7.31 in;185.67 mm (2)
  • 7.435 in;188.85 mm (2)
  • 7.6 in;193 mm (3)
  • 8 (4)
  • 8.1 in;205.70 mm (2)
  • 8.46 in;215 mm (2)
  • 9 (2)
  • 9 in;22.9 mm (2)
  • 9/16 in (2)
  • Show More...