Narrow By:

• Trade Size:3/4 in

• Product Type

  

  • 1 1/2 LT 45 Degree Conn Ground Lug (1)
  • 1 1/2 LT 90 Degree Conn Al (1)
  • 1 1/2 LT 90 Degree Conn Ground Lug (1)
  • 1 1/2 LT Conn Al (1)
  • 1 1/2 LT Conn Ground Lug (1)
  • 1 1/4 LT 45 Degree Conn (1)
  • 1 1/4 LT 45 Degree Conn Ground Lug (1)
  • 1 1/4 LT 90 Degree Conn Ground Lug (2)
  • 1 1/4 LT Conn Al (1)
  • 1 1/4 LT Conn Ground Lug (1)
  • 1 1/4 LT Conn With Ground Lug Al (1)
  • 1 1/4 Non-Insul 45 Deg Liqtight CN (1)
  • 1 GR LT (1)
  • 1 In Alum L-T CRD&CBL Conn (2)
  • 1 In Hi/Low Temp LT Conduit 100 FT (1)
  • 1 In Insul. Liq.Tight Conn Straigh (1)
  • 1 Inch 90 Deg Bullet Connector (1)
  • 1 Inch Conn, Sscrew, Emt, STL, Insul (1)
  • 1 Inch Type A LT Conduit 100 Feet. (1)
  • 1 LT 45 Degree Conn Ground Lug (1)
  • 1 LT 90 Degree Conn Al (1)
  • 1 LT 90 Degree Conn Ground Lug (1)
  • 1 LT 90 Degree Conn Ground Lug Al (1)
  • 1 LT Conn Al (1)
  • 1 LT Conn Ground Lug (1)
  • 1 LT Conn With Ground Lug Al (1)
  • 1" 90D LT Push In Conn (1)
  • 1" LT Push In Conn (1)
  • 1" PVC LT 45 Deg Conn (1)
  • 1/2 & 3/4 Octogon Concrete Box (1)
  • 1/2 3PC Conduit Coupling (1)
  • 1/2 90 Deg GR LT (1)
  • 1/2 GR LT (1)
  • 1/2 In Cord Conn .450-.560 Rang (1)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 Inch 90 Deg Bullet Connector (1)
  • 1/2 Inch Straight Bullet Connector (1)
  • 1/2 LT 45 Degree Conn Ground Lug (1)
  • 1/2 LT 45 Degree Conn Insulated (1)
  • 1/2 LT 90 Degree Conn Al (1)
  • 1/2 LT 90 Degree Conn Ground Lug Al (1)
  • 1/2 LT Conn Al (1)
  • 1/2 LT Conn Non Metallic Black (1)
  • 1/2 LT Conn With Ground Lug Al (1)
  • 1/2 Straight Liquidtight FTG Assem (1)
  • 1/2" 90 Screw On NMLT (1)
  • 1/2" LT Push In Conn (1)
  • 1/2" PVC LT Zero to 90 (1)
  • 1/2IN 90D LT Reliefconn .12-.37 Pa6 (1)
  • 1/2IN LT Type B Cond PVC BLK (1)
  • 1/2INCH Type A LT Conduit 200 Feet (1)
  • 1-1/2 In Alum L-T CRD&CBL Conn (2)
  • 1-1/2IN 45D LT Noninsul GRND Conn I (1)
  • 1-1/2IN 90D LT Noninsul GRND Conn I (2)
  • 11/4 In 90 Deg Nometalic Type A Con (2)
  • 1-1/4IN 90D LT Conn Typea Cond Irn (1)
  • 1-1/4IN STR LT Noninsul GRND Conn S (1)
  • 1IN 45D LT GRND Conn W/Lug Iron (1)
  • 1IN 90D LT Conn Typea Cond Iron (1)
  • 2 1/2 3PC Conduit Coupling (1)
  • 2 1/2 In Noninsul 45DEG Liqtight CN (1)
  • 2 1/2 LT 45 Degree Conn (1)
  • 2 1/2 LT 90 Degree Conn (1)
  • 2 1/2 LT 90 Degree Conn GRND 1/0 (1)
  • 2 1/2 LT Conn (1)
  • 2 1/2 LT Conn GRND 1/0 (1)
  • 2 Inch Straight Bullet Connector (1)
  • 2 LT 45 Degree Conn Ground Lug (1)
  • 2 LT 90 Degree Conn Ground Lug (1)
  • 2 LT Conn Al (1)
  • 2 LT Conn Ground Lug (1)
  • 2 LT Conn Insulated (1)
  • 2" PVC LT 45DEG Con (1)
  • 2" PVC LT 90DEG Con (1)
  • 2.5 In Insul 90 Deg Liq Tight Conn (1)
  • 2.5 Inch Conn, Sscrew, Emt, STL, Insul (1)
  • 2-1/2 Inch Coupling, Comp., Emt, STL (1)
  • 2IN 45D LT Noninsul GRND Conn Irn (1)
  • 2IN 90D LT Noninsul GRND Conn Irn (2)
  • 2IN STR LT Noninsul GRND Conn STL (1)
  • 3 1/2 LT 90 Degree Conn (1)
  • 3 1/2 LT Conn (1)
  • 3 In Insul 90 Degree Liq Tight Con (1)
  • 3 LT 45 Degree Conn GRND 1/0 (1)
  • 3 LT 90 Degree Conn GRND 1/0 (1)
  • 3 LT Conn (1)
  • 3 LT Conn GRND 1/0 (1)
  • 3.5 Inch Coupling, Comp., Emt, STL (1)
  • 3.5 Inch Coupling, Sscrew, Emt, STL (1)
  • 3/4 90 Deg GR LT (1)
  • 3/4 Black Beauty Cord Fit .400-.560 (1)
  • 3/4 Black Beauty Cord Fit .560-.690 (1)
  • 3/4 Black Beauty Cord Fit .660-.780 (1)
  • 3/4 GR LT (1)
  • 3/4 Inch 90 Deg Liquidtight FTG (1)
  • 3/4 Inch Conduit Fittings N/Met 6FT (1)
  • 3/4 Inch Straight Bullet Connector (1)
  • 3/4 Insul GRND Liquidtight Straight (1)
  • 3/4 LT 45 Degree Conn Ground Lug (1)
  • 3/4 LT 90 Degree Conn Ground Lug (1)
  • 3/4 LT 90 Degree Conn Ground Lug Al (1)
  • 3/4 LT 90 Degree Connal (1)
  • 3/4 LT Conn Ground Lug (1)
  • 3/4 LT Conn With Ground Lug Al (1)
  • 3/4" 90 Screw On NMLT (1)
  • 3/4" LT Push In Conn (1)
  • 3/4" Snap 2IT Connect (1)
  • 3/4"90D LT Push Conn (1)
  • 3/4IN Cord Connector .375-.500 Rang (1)
  • 3/4INCH Type A LT Conduit 175 Feet (1)
  • 3/8 Inch 90 Deg Liquidtight FTG (1)
  • 3/8 Inch Straight Liquidtight FTG (1)
  • 3/8 LT 45 Degree Conn (1)
  • 3/8 LT 90 Degree Conn (1)
  • 3/8 LT Conn (1)
  • 3/8" 90 Screw On NMLT (1)
  • 3/8IN 45D LT Noninsul GRND Conn Irn (1)
  • 3-1/2 Inch Conn, Sscrew, Emt, STL (1)
  • 4 3PC Conduit Coupling (1)
  • 4 In SQ Box 2 1/8 DP W/ CV BKT (1)
  • 4 Inch Conn, Comp., Emt, STL (1)
  • 4 Inch Coupling, Sscrew, Emt, STL (1)
  • 4 LT 45 Degree Conn GRND 3/0 (1)
  • 4 LT 90 Degree Conn (1)
  • 4 LT 90 Degree Conn GRND 3/0 (1)
  • 4 LT Conn Al (1)
  • 4 LT Conn GRND 3/0 (1)
  • 4-11/16-SQ BX, STL, 42CU, 1/2&3/4E-Ko, (1)
  • 4IN-Octagon Box STL 22.5CU 3/4-Ko (1)
  • 8FT Vapor Tight Fixture Feat. Power Select & Color Select, 9 (2)
  • 90° Connector (6)
  • 90°Connector (6)
  • Compression Connector (2)
  • Conduit Body (63)
  • Conduit Connector (1)
  • Conduit Coupling (15)
  • Conduit Nipple (180)
  • Conduit Outlet Body (1)
  • Conduit Seal Body (15)
  • Conduit Support (37)
  • Connector (23)
  • Cord Grip (2)
  • Elbow (16)
  • Electrical Metal Conduit (10)
  • Electrical Metallic Tube (7)
  • Emt Conduit Elbow (31)
  • Enclosure (2)
  • Flexible Conduit (6)
  • Galvanized Steel Rigid Conduit (15)
  • Incandescent Airtight Housing (7)
  • Instant Cold Galvanize Coating (1)
  • Insulated Connector (12)
  • Intermediate Metal Conduit (9)
  • LFMC XTMP 3/4IN BLK 30M/100FT (1)
  • Liquid Level Control (1)
  • Liquid Tight 45° Connector (19)
  • Liquid Tight 45°Connector (19)
  • Liquid Tight 90° Connector (28)
  • Liquid Tight 90°Connector (33)
  • Liquid Tight Conduit (10)
  • Liquid Tight Connector (4)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Straight Connector (49)
  • Liquidtight Conduit Connector (4)
  • Liquidtight Flexible Conduit (32)
  • Liquidtight Flexible Conduit Connector (1)
  • Liquidtight Flexible Metallic Conduit (7)
  • Liquidtight Flexible Nonmetallic Conduit (7)
  • Masonry Box (4)
  • Masonry Box 3-1/2 Inch Deep, 1 Gang (1)
  • Masonry Box 3-1/2 Inch Deep, 4 Gang (1)
  • New 1 Inch Straight Carflex Fitting (1)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metal Watertight Connector (1)
  • Non-Metallic Liquid Tight 90° Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (6)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Nonmetallic Liquid-Tight Conduit (8)
  • Nonmetallic Liquid-Tight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Conduit Connector (6)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Prestest FV 120V Amber Led-Plastic Lens (2)
  • PVC Conduit (3)
  • PVC CTD Cond 2IN RGD STL Gray (1)
  • RCS Beam OD1.050IN Nom SZ .75IN STL (1)
  • RGD Cond CLP 1-1/2IN 12GA HDG STL (1)
  • RGD Cond CLP 1-1/4IN 14GA HDG STL (1)
  • RGD Cond CLP 1IN 14GA HDG STL (1)
  • RGD Cond CLP 2-1/2IN 12GA HDG STL (1)
  • RGD Cond CLP 4IN 11GA HDG Steel (1)
  • Rigid Conduit (9)
  • Rigid Conduit Coupling (10)
  • Rigid Conduit Elbow (23)
  • Rigid Conduit Hub Plug (1)
  • Rigid Conduit Nipple (80)
  • Ring, Sealing 1/2 Rubber W/STL (1)
  • Sealing Ring W/ S.STL Retainer (1)
  • Service Drop Cable (1)
  • Set Screw Coupling (1)
  • Snap 2 It Connector 38 (1)
  • SNAP2IT Snap In Duplex 3838 (1)
  • Special Radius Elbow (1)
  • SQ Box 21CU 1/2 3/4IN E-Ko MS-BRKT (1)
  • Stainless Steel Rigid Conduit (1)
  • Standard Radius Elbow (11)
  • Straight L.T. Conn. (1)
  • TITAN2 Type CB Liquidtight Flexible Metal Conduit (2)
  • TITAN2 Type Ef Extra-Flexible Liquidtight Metal Conduit (3)
  • TITAN2 Type Ul Liquidtight Flexible Metal Conduit (20)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (2)
  • Afc Cable (1)
  • AFC CABLE SYSTEMS (1)
  • Allied Tube & Conduit (3)
  • Aluminum (1)
  • American Fittings Corp (8)
  • AMERICAN POLYWATER (2)
  • Amfico (19)
  • Anaconda (11)
  • ANAMET ANACONDA (1)
  • Anamet Electrical Inc (8)
  • Appleton (63)
  • Appleton/Oz Gedney (2)
  • ARLINGTON (16)
  • Arlington Industries (14)
  • Bridgeport (45)
  • Bridgeport Fittings (10)
  • Calpipe Industries, Inc (2)
  • CALPIPE INDUSTRIES, INC. (4)
  • CANTEX,INC (3)
  • Carlon (8)
  • Conduit (30)
  • Conduit Pipe Products (145)
  • CRC Industries, Inc. (1)
  • Crouse Hinds (1)
  • Eaton (129)
  • EATON CROUSE-HINDS SERIES (85)
  • EATON CUTLER-HAMMER (17)
  • Eaton Lighting (1)
  • EC-KORNS (69)
  • ECN-KORNS (169)
  • Electri-Flex (7)
  • Flexible Conduit (97)
  • Intermatic (1)
  • JUNO (6)
  • Keystone (2)
  • KILLARK (18)
  • OCAL (2)
  • O-Z/GEDNEY (9)
  • Peco Fasteners (1)
  • PLASTIBOND (41)
  • PLASTI-BOND (1)
  • PROGRESS (1)
  • PVC & Accessories (3)
  • Rectorseal (2)
  • Robroy/Ecn Korns (7)
  • SNAP 2 IT (7)
  • SNAP2IT (1)
  • Southwire (3)
  • Southwire Rough Electrical Com (161)
  • Steel City (28)
  • SUPERFLEX LTD. (23)
  • Superstrut (5)
  • SYLVANIA (2)
  • T&B Ind Fitting (186)
  • T&B Liquidtight Fittings (5)
  • T&B Liquidtight Systems (4)
  • Thomas&Betts-Abb Ins Prod (2)
  • Topaz - Southwire LLC (6)
  • WIREMOLD (1)
  • WIRING DEVICE-KELLEMS (4)
  • Show More...

• Trade Size

  

  • 0.5 (4)
  • 0.5 in (14)
  • 0.75 (1)
  • 0.75 in (11)
  • 1 (21)
  • 1 1/2 (2)
  • 1 1/2 IN (6)
  • 1 1/4 (4)
  • 1 1/4 in (7)
  • 1 in (51)
  • 1 in;27 mm (2)
  • 1 INCH (46)
  • 1 PH (14)
  • 1.25 in (13)
  • 1.5 (2)
  • 1.5 in in (14)
  • 1/2 (24)
  • 1/2 in (68)
  • 1/2 in;16 mm (2)
  • 1/2 INCH (56)
  • 1-1/2 (8)
  • 1-1/2 in (38)
  • 1-1/2 in;41 mm (3)
  • 1-1/2 INCH (48)
  • 1-1/4 (4)
  • 1-1/4 in (27)
  • 1-1/4 in;35 mm (3)
  • 1-1/4 INCH (43)
  • 2 (11)
  • 2 1/2 in (8)
  • 2 A (11)
  • 2 in (44)
  • 2 in;53 mm (3)
  • 2 INCH (47)
  • 2-1/2 (3)
  • 2-1/2 IN (11)
  • 2-1/2 in;63 mm (2)
  • 2-1/2 INCH (39)
  • 3 (3)
  • 3 1/2 in (2)
  • 3 in (32)
  • 3 in;78 mm (3)
  • 3 INCH (39)
  • 3.5 in (7)
  • 3/4 (22)
  • 3/4 in;21 mm (3)
  • 3/4 INCH (54)
  • 3/8 (9)
  • 3/8 in (10)
  • 3/8 INCH (2)
  • 3-1/2 (2)
  • 3-1/2 in;91 mm (2)
  • 3-1/2 INCH (24)
  • 31531 (11)
  • 4 (5)
  • 4 in (19)
  • 4 in;103 mm (3)
  • 4 INCH (37)
  • 5 INCH (5)
  • 6 in (1)
  • 6 INCH (6)
  • 798 (10)
  • Show More...

• Material

  

  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (10)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (13)
  • 316 Stainless Steel (4)
  • Aluminum (38)
  • Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene (3)
  • Copper Free Aluminum (2)
  • Copperfree Aluminum (6)
  • Copper-Free Aluminum (1)
  • Die Cast Zinc (2)
  • Die-Cast Zinc (8)
  • Flat Rolled Steel (16)
  • Galvanized Steel (46)
  • IRON (1)
  • Iron;Malleable (4)
  • Jacket: PVC;Core: Steel (18)
  • Jacket: Thermoplastic PVC (2)
  • Jacket: Thermoplastic;Core: Steel (5)
  • Low Carbon Steel (2)
  • Malleable Iron (107)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body);Steel (Ferrule, Caps);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Cap);Aluminum (Ferrule);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (29)
  • MALLEABLE IRON (CLAMP), STEEL (BOLT AND NUT) (14)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Metal (4)
  • Non-Metallic (11)
  • Nylon (19)
  • Nylon (Body) Santoprene® (Grommet) Polyethylene (Sealing Ring) Zinc (Locknut) (2)
  • Nylon 6/6 (2)
  • Plastic (5)
  • PVC (22)
  • Stainless Steel (4)
  • Steel (397)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel IN (107)
  • Thermoplastic (24)
  • THERMOPLASTIC PVC (1)
  • UV-Rated Plastic (16)
  • Zinc (13)
  • Zinc Cast (14)
  • Zinc Die Cast (12)
  • Zinc Die Cast (Bus) (2)
  • Zinc Electroplated Steel (4)
  • Zinc Plated Machined Steel Screw/Malleable Iron (1)
  • ZINC PLATED STEEL (2)
  • Show More...

• Finish

  

  • 2 Mil Red Urethane Coated (Interior), 40 Mil Gray PVC Coated (Exterior) Over Hot Galvanized (7)
  • 2 Mil Red Urethane Coated (Interior)/40 Mil Gray PVC Coated (Exterior) (8)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior, Hot Dip Galvanized (2)
  • Ball burnish (10)
  • Ball Burnished;Mirror Smooth (8)
  • Bright Polished (4)
  • Chromate, Epoxy Powder Coat/Zinc Electroplated (11)
  • Electro Galvanized (16)
  • Electro Zinc Plated/Chromate Coating (43)
  • Electro-galvanized (1)
  • Electro-Galvanized Chromate Treated (2)
  • Electrogalvanized with Aluminum Acrylic Paint (63)
  • Electro-Galvanized with Aluminum Acrylic Painted (13)
  • Galvanized (384)
  • Hot Dip Galvanized (83)
  • Hot Dip Galvanized, 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (3)
  • Metallic (1)
  • Molded (3)
  • Molded;Electro Zinc (Locknut) (2)
  • N/A (2)
  • Natural (3)
  • NO FINISH (7)
  • Powder Coated Paint (1)
  • Pre-Galvanized (6)
  • Pre-Galvanized Zinc (3)
  • PVC (11)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Silver (5)
  • STAINLESS STEEL (2)
  • TPR Jacket (4)
  • Unfinished (3)
  • Zinc Coated (2)
  • Zinc Electroplate (2)
  • Zinc Electroplated (60)
  • Zinc Electroplated/Chromate Coating (53)
  • Zinc Electroplated;Chromate And Epoxy Powder Coat/Zinc Electroplate (2)
  • Zinc Plated (36)
  • Zinc Plating/Clear Chromate (8)
  • Show More...

• Color

  

  • Black (15)
  • Black (Cap) (4)
  • Blue (2)
  • Blue (Cap) (4)
  • Gray (125)
  • Gray (Exterior Coating);Red (Interior Coating) (4)
  • Gray (Standard);Black (Optional) (3)
  • Gray 0 (1)
  • Green (Cap) (2)
  • MALLEABLE IRON (92)
  • Metallic (12)
  • Orange (11)
  • Orange (Cap) (4)
  • Orange/Gray (2)
  • Pink (2)
  • Purple (2)
  • Red (Cap) (2)
  • Red (Tape) (2)
  • Silver (25)
  • Unfinished (2)
  • Yellow (Cap) (3)
  • Show More...

• Length

  

  • 0.978 (3)
  • 1 (3)
  • 1 in (2)
  • 1.250 in (4)
  • 1.31 (1)
  • 1.34 in (2)
  • 1.43 in (2)
  • 1.438 in (2)
  • 1.5 in in (2)
  • 1.563 INCH (1)
  • 1.625 in (3)
  • 1.625 INCH (1)
  • 1.63 in (2)
  • 1.68 in (1)
  • 1.8 INCH (1)
  • 1.89 in (1)
  • 1.9 (2)
  • 10 A (9)
  • 10 Foot (12)
  • 10 ft (22)
  • 10 INCH (28)
  • 10.5 in (1)
  • 100 (15)
  • 100 Foot (2)
  • 100 ft (21)
  • 1000 (4)
  • 1000 ft (7)
  • 1-1/2 INCH (6)
  • 1-1/8 in (2)
  • 1-1/8 INCH (2)
  • 118.92 (2)
  • 12 (2)
  • 12 INCH (28)
  • 120 (1)
  • 1200 (7)
  • 1200.7874 (3)
  • 1-21/32 in;42.1 mm (3)
  • 13.5 (2)
  • 1-3/4 INCH (1)
  • 1-3/8 in;34.9 mm (2)
  • 1-3/8 INCH (2)
  • 15 (1)
  • 1-5/8 in (1)
  • 1-5/8 INCH (1)
  • 150 (3)
  • 17 in (1)
  • 1-7/8 in;47.6 mm (3)
  • 2 A (7)
  • 2 in (3)
  • 2 INCH (17)
  • 2.063 Inch (2)
  • 2.11 (2)
  • 2.2 in (1)
  • 2.4 (1)
  • 2.99 in (1)
  • 200 (3)
  • 200 ft (2)
  • 2-1/2 INCH (14)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/32 in;53.2 mm (2)
  • 2-3/4 INCH (2)
  • 25 (4)
  • 25 ft (5)
  • 2-5/8 INCH (1)
  • 2-7/8 INCH (1)
  • 3 (1)
  • 3 in (7)
  • 3 INCH (19)
  • 3.25 INCH (1)
  • 3.5 (1)
  • 3.5 in (4)
  • 3.5 INCH (1)
  • 3.75 INCH (1)
  • 300 (2)
  • 3-1/2 INCH (4)
  • 3-1/4 in;82.6 mm (5)
  • 3-1/8 INCH (2)
  • 31531 (7)
  • 3-3/4 in (4)
  • 3-3/4 in;95.3 mm (3)
  • 4 (1)
  • 4 INCH (30)
  • 4.125 in (1)
  • 4.5 (1)
  • 4.5 INCH (1)
  • 4.5625 in (3)
  • 400 (3)
  • 4-1/2 in;114.3 mm (3)
  • 5 A (9)
  • 5 INCH (24)
  • 5.1875 in (3)
  • 5.200 in (2)
  • 5.37 in (3)
  • 5.375 in (1)
  • 5.38 in (2)
  • 5.625 in (2)
  • 5/8 in (3)
  • 50 (6)
  • 50 Foot (1)
  • 50 ft (6)
  • 500 (6)
  • 500 ft (3)
  • 51.375 in (1)
  • 5-1/2 in;139.7 mm (2)
  • 51869 (9)
  • 6 (4)
  • 6 in (11)
  • 6 INCH (29)
  • 6.00 (2)
  • 6.2 in (3)
  • 6.25 in (3)
  • 600 (4)
  • 7.05 in (2)
  • 7.125 in (3)
  • 7.25 in (3)
  • 7.4375 in (2)
  • 7/8 in (1)
  • 798 (10)
  • 8 (1)
  • 8 Each (9)
  • 8 in (2)
  • 8 INCH (27)
  • 8.12 in (4)
  • 8.125 in (3)
  • 8.1875 in (4)
  • 9 ft 10-1/2 in (4)
  • 9 ft 10-1/4 in (3)
  • 9 ft 11 in (8)
  • 9 ft 11-1/4 in (4)
  • 9.00 (2)
  • 9.1875 in (3)
  • Show More...

• Diameter

  

  • 0.813 in (4)
  • 0.820 to 0.840 in (Outer);0.622 to 0.642 in (Inner) (3)
  • 1.093 INCH (1)
  • 1.19 in (2)
  • 1.25 in (6)
  • 1.25 in;31.8 mm (2)
  • 1.250 in (2)
  • 1.40 in;35.6 mm (2)
  • 1.43 in (2)
  • 1.46 in (3)
  • 1.48 in (2)
  • 1.563 in (5)
  • 1.75 in (1)
  • 1.76 in (2)
  • 1.81 in;45.9 mm (2)
  • 1/2" (2)
  • 1-1/4" (2)
  • 1-11/16 in;42.9 mm (2)
  • 1-21/32 in;42.1 mm (4)
  • 1-3/8 in;34.9 mm (5)
  • 1-7/8 in;47.6 mm (5)
  • 2 in (2)
  • 2.31 in;58.7 mm (2)
  • 2.4 in (1)
  • 2.438 in (3)
  • 2-11/16 in (2)
  • 2-23/32 in;69.1 mm (3)
  • 3 in (4)
  • 3.19 in;81 mm (2)
  • 3.84 INCH (1)
  • 3/4" (3)
  • 3/8" (2)
  • 3-1/4 in;82.6 mm (5)
  • 4" (2)
  • 4.188 in (3)
  • Show More...

• Thread Size

  

  • 0.63 in (4)
  • 1 in (7)
  • 1 in NPT (9)
  • 1/2 in (2)
  • 1/2 in NPT (11)
  • 1/2 INCH (1)
  • 1-1/2 in NPT (8)
  • 1-1/4 in NPT (6)
  • 2 in NPT (10)
  • 2-1/2 in NPT (3)
  • 3 in NPT (5)
  • 3/4 in (2)
  • 3/4 in NPT (11)
  • 3/4 INCH (1)
  • 3/8 in NPT (3)
  • 4 in NPT (3)
  • Show More...

• Bend Radius

  

  • 10.5 INCH (8)
  • 12 in (3)
  • 13 INCH (8)
  • 15 in (2)
  • 15 INCH (5)
  • 16 in (2)
  • 16 INCH (8)
  • 24 in (2)
  • 24 INCH (3)
  • 36 INCH (4)
  • 4 in (6)
  • 4 INCH (2)
  • 4.25 in (3)
  • 4.5 INCH (3)
  • 48 INCH (2)
  • 5 in (4)
  • 5.75 INCH (5)
  • 6.5 in (4)
  • 7.25 INCH (6)
  • 8 in (3)
  • 8.25 INCH (4)
  • 8.5 in (3)
  • 9 in (3)
  • 9.5 INCH (8)
  • Show More...

• Connection Type

  

  • External Threaded (12)
  • Liquidtight (6)
  • Liquid-Tight (6)
  • Male (2)
  • Male x Female (13)
  • NPT (6)
  • Straight (16)
  • Threaded (183)
  • Threaded x Push In (6)
  • Show More...

• Knockout Size

  

  • 1 in (4)
  • 1/2 in (4)
  • 1/2 to 3/4 in (Conduit Concentric) (4)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 2 in (2)
  • 3/4 in (4)
  • Show More...

• Mounting Type

  

  • Horizontal Mount/Vertical Mount (11)
  • Push-On (6)
  • Screw Mount (4)
  • Surface Mount (2)
  • Threaded (62)
  • Vertical Mount (2)
  • Show More...

• Number Of Conductors

  

  • 1 (1)
  • 2 (1)
  • 3 (1)
  • 4 (1)
  • Show More...

• Sub Brand

  

  • ABB (60)
  • Carlon (3)
  • ETP (4)
  • Juno(R) (6)
  • Liquidator(TM) (30)
  • Pentair (1)
  • Phoenix (137)
  • Sealproof(R) (15)
  • Snap2it(R) (6)
  • Show More...

• Special Features

  

  • 1/2 IN Knockout (2)
  • 4Q fittings have plain throat (non-insulated);Bonding wedge locknuts are recommended in hazardous locations;Compact, slim diameter with small turning radius;Furnished with locknut and knockout sealing ring;Hot dip or mechanically galvanized finish optionally available;Inspection windows in ferrule to ensure full en;Intrinsically safe;Liquidtight/raintight/oiltight/concretetight;Long ferrule prevents pullout and tight bend conduit pop-out;O-Z/Gedney fittings are used with liquidtight flexible metal conduit (3)
  • Abrasion Resistant;Crush Resistant;Strain Resistant;Oil Resistant;Sunlight Resistant (2)
  • Bolt head is combination slot and hex head for flexibility of attachment (5)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (5)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;Copper free (4/10 of 1 PCT or less) aluminum cap;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension (4)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Machined steel cap;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord;Steel or Tefl (5)
  • Color-Coded Thread Protectors (2)
  • Compact design with small turning radius;Copperfree (4/10 of 1 PCT of copper or less) aluminum;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;Full, machined tapered threads (NPT);High corrosion resistance;Machine tool building, motor and transformer terminations, robotics assembly, air conditioning equipment installation and other applications that require flexibility and protection against entry of liquids, vapors or solids;Seals out (6)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Steel compression nut;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (3)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (10)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (4)
  • Concrete Tight (13)
  • Concrete tight when taped (3)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (30)
  • Connector provides a smooth, gradual radius bend (2)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (7)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (53)
  • Corrosion Resistant (7)
  • Corrosion Resistant, Automatic Lock (4)
  • Corrosion Resistant:Rust Resistant:Sunlight Resistant;Rated For 90° Cable;Rigid Nonmetallic PVC Schedule 40;Belled End (3)
  • Corrosion Resistant;Oil Resistant;Sunlight Resistant (23)
  • Corrosion Resistant;Rust Resistant (3)
  • Crush Resistant;Oil Resistant;Sunlight Resistant (4)
  • Design Load 200 Lb, Includes Combination Recess Hex Head Machine Screw (2)
  • Designed to meet UL 360 ID/OD dimension requirements (4)
  • Ease of assembly and disassembly of STNM connectors permits make-up of harnesses in advance for fast, simple connections during production line assemblies;Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals;It cannot bend or twist the conduit and thereby protects wiring;The nut rides only on the sleeve and not on the conduit;The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wal (10)
  • Electric Resistant;Corrosion Resistant (9)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • Explosionproof;Dust Ignitionproof;Rain Tight (13)
  • Features: Heavy-Duty, Enclosures Protect Time Switches from Rain, Sleet, Snow and Ice, Convenient Mounting Holes, Separate Grounding Terminals, Lockable Hasp Holds Door Closed, Rainproof (1)
  • Form 7 Condulet Outlet Bodies Approach Conduit in Size For Neat;Compact Installations;Orm 7 Has Exclusive Snaptight and Wedgenut Cover Attachment to Provide Clear;Unobstructed Cover Opening;Conduit Hubs Have Tapered Threads and Feature Integral Bushings (33)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (6)
  • Insulated Throat (1)
  • Interlocking design; Corrosion resistant; Cable tray installations per NEC; Environmental air-handling space installation NEC 300.22; UL Classified 1, 2 and 3-hour Through-Penetration Fire Systems UL File R14141 (2)
  • Liquid and Concrete Tight (3)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (16)
  • Malleable Iron Body with Steel Ferrule (6)
  • Maximum operation in commercial and industrial environments (1)
  • Meets Coast Guard CG293 (9)
  • Metallic (4)
  • Mild Acids, Sunlight, Impact, Oil, Crush Resistant (2)
  • No Metal Core to Fatigue from Flexing or Vibration (6)
  • Non-Insulated (1)
  • Non-Metallic (4)
  • Nylon reinforced braid between two layers of PVC for strength and flexibility. Sunlight resistant, oil resistant, mild acid resistance, non-conductive raceway. (4)
  • Oil Tight, Furnished With Sealing Ring And Locknut (4)
  • Point-of-purchase packaging (2)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (30)
  • Push-On Installation;No Tools (6)
  • Quick Installation, Cuts with Utility Knife or PVC Cutter (3)
  • Reduce the size of a knockout or slip hole in a sheet metal enclosure to a smaller trade size; Two reducing washers of the same size are required for each knockout; Knockout closures are used to close unused opening or knockout in sheet metal box, enclosure or cabinet (3)
  • Resists Corrosion, Abrasion, Oil, Water, Acid, Metal Shavings, & Rough Environments;Resists Abuse, Pull & Crushing;Outdoor, Sunlight Resistant, Direct Burial;Light Weight & Lower Installed Cost;Quick Installation, Cuts With Utility Knife or PVC Cutter (8)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, & Common Solvents;Lower Installed Cost;Flammability Classification 94V-2;Temperature Index 125° C (6)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, and Common Solvents;Lower Installed Cost;Molded of Type Nylon 6. Flammability Classification 94v-2:Temperature Index 125°C (6)
  • Screwdriver Leverage Hole In Head to Provide Extra Torque (1)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (4)
  • Seals Out Oil, Water, Dust, Dirt and Fumes;Unique Long Ferrule with More Pronounced Threads Provides Over Four Times Ul Pull-Out Requirements;Ferrule Provides Maximum Surface Contact for Better Sealing and a Continuous, Permanent, Positive Metal-To-Metal Ground;Liquidtight/Raintight/Oiltight;Compact Design with Small Turning Radius (3)
  • Steel Backed Neoprene (2)
  • ST-SR wire mesh strain relief with cap can be substituted for any related trade size ST Series cap to provide integral strain relief (2)
  • Superior Protection, Strength, Safety and Ductility for your Most Demanding Wiring Job (10)
  • The metal body of zinc fittings bonds to the metal (3)
  • The Smooth Inner Surface Ensures that Cables and Conductors Can Be Fed Through Very Easily (4)
  • UL bonded strip 3/8in - 1.25in for grounding. UL Liquidtight all sizes. Sunlight resistant. Flame retardant PVD jacket. Hot dipped zinc galvanized steel low carbon steel core. (3)
  • UL Type 4 Water Tight (4)
  • Unique profile permits easy wrenching. Smooth, accurately tapped threads facilitate installation. Watertight and corrosion resistant. NEMA Types: 2,3,3R,4,4X,12, 13 (3)
  • Watertight Fittings designed for indoor and outdoor applications (1)
  • Widest cable ranges from 14/2 to 10/4 (1)
  • With 14 To 4 AWG Aluminum Grounding Lug (24)
  • With 6 To 3/0 AWG Aluminum Grounding Lug (2)
  • With 8 To 1/0 AWG Aluminum Grounding Lug (4)
  • Show More...

• For Use With

  

  • Carflex Conduit and Carflex X-Flex Conduit (3)
  • Circuit Wiring (4)
  • Conduit System (15)
  • Liquid Tight Flexible Metal Conduit (20)
  • Liquidtight Conduit (6)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (4)
  • Liquidtight Flexible Metallic Conduit (42)
  • Liquid-Tight Flexible Metallic Conduit (33)
  • Liquidtight Flexible Non-Metallic Conduit Type A (5)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic Connectors (3)
  • Non-Metallic Liquid-Tight Conduit (6)
  • Rigid Conduit (86)
  • Show More...

• Application

  

  • 600 V and lower circuits. (3)
  • 90 Degree connector for use with metallic liquid tight conduit. (3)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (3)
  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (63)
  • Boatyard, Marina, Direct Burial, Electric Sign, Hazardous Location, Outline Lighting, Raised Floor, Service Entrance Wiring, Elevator, Hoistway (3)
  • Bridgeport's LB Conduit Bodies with Integral Raintight Connectors allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (94)
  • Commercial / Institutional Buildings / Structures - Power Distribution and Controls (3)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (30)
  • Commercial;Industrial;Wet Location (12)
  • CONCEALED AND EXPOSED LOCATION, DIRECT BURIAL, EQUIPMENT GROUNDING (2)
  • Concealed;Exposed Location (2)
  • Constant flexing and motion applications (4)
  • Corrosion Protection for Electrical Systems (3)
  • Damp Locations;Wet Locations (4)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (7)
  • Electrical Raceway System (10)
  • Elevator;Escalator;Hoistway;Electric Sign;Hazardous Location (3)
  • Existing 1/2 in or 5/8 in wall with 4 in hole saw. (4)
  • EXPOSED LOCATION, INDUSTRIAL MACHINERY (4)
  • For AC - MCI-A - HCF steel and aluminum cable (2)
  • For Connecting To Type A Flexible Nonmetallic Conduit (10)
  • For Electrical Power, Control And Communication Cables, Motor Leads, Listed Assemblies, Listed Wire Fixtures, Manufactured Wiring Systems (2)
  • For Flexible Type Neoprene, Hypalon And PVC Jacketed Power Or Control Cord And Cable (9)
  • For Liquidtight Flexible Metal Conduit (24)
  • For Mounting Pipe or Conduit Parallel to the Beam (1)
  • For Service Entrance Wiring Upto 6 FT (3)
  • For use with 664 SC and 664 CI floor boxes (2)
  • For use with Carflex conduit and Carflex X-Flex conduit (6)
  • For use with conduit (12)
  • For use with EMT conduit (13)
  • For use with rigid/IMC conduit (3)
  • For Used To Reduce The Size Of A Knockout Or Slip Hole (3)
  • Grounded Electrical Wiring System (9)
  • Hazardous Location (22)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (8)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Assemblies;Wire Hook-Up;Indoor/Outdoor (12)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Transformer Connections;Outdoor Lighting (8)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors and Controls;Printing Equipment;Pumps;Refrigeration Equipment;Transformer Connections;Outdoor Lighting (3)
  • Ideally Suited for Continuous Flexing Applications or Vibration (6)
  • Indoor/Outdoor, HVAC Equipment, Machine Tool, Motor and Control, Marine Equipment, Printing Equipment, Pump, Refrigeration Equipment (3)
  • Indoor;Outdoor (3)
  • INDUSTRIAL, COMMERCIAL, BOATYARD, DIRECT BURIAL, ELECTRIC SIGN, OUTLINE LIGHTING, RAISED FLOOR, SERVICE ENTRANCE WIRING, HAZARDOUS LOCATION (1)
  • INDUSTRIAL, COMMERCIAL, CONVEYOR, BLOWER, CRANE, AIR CONDITIONER, MACHINE TOOLING, LUBRICATING EQUIPMENT, SWIMMING POOL, SPA, HOT TUB MOTOR (1)
  • Industrial;Commercial;Boatyard;Direct Burial;Electric Sign;Outline Lighting;Raised Floor;Service Entrance Wiring;Hazardous Location (4)
  • Industrial;Commercial;Conveyor;Blower;Crane;Air Conditioner;Machine Tooling;Lubricating Equipment (23)
  • Liquidtight (2)
  • Machine Tools, Motor Hookups, Food Processing Equipment, Extensions from Wire Ways, and Sensor and Micro Switch Wiring Found In Control Consoles (4)
  • Metallic And Non Metallic Liquid Tight Conduit Typ (1)
  • Motor Circuits, Agricultural Buildings, industrial, Commercial, Direct Burial, Encased in Concrete, Swimming Pool, Spa, Hot Tub Motor, Electric Signs, Outline Lighting Supply, Secondary Circuit Conductor, Hazardous Location, Floating Building Feeders (2)
  • New work and Retrofit (5)
  • NM Cable (5)
  • Outdoor (10)
  • Provides a Positive Seal Against Water, Oil And Dust (4)
  • PVC Jacketed MC cable (1)
  • Recessed Residential;Damp Location (3)
  • Recessed Residential;Damp Location;Wet Location W/Appr Trims (3)
  • STANDARD (9)
  • Stationary Machinery and Equipment Outside Factory - Stationary Machinery and Equipment Outside Factory - Other (7)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (7)
  • Suitable for Use In Hazardous Locations Where General Purpose Equipment is Specifically Permitted by NEC 501-4(B) (9)
  • Superstrut Pipe Straps are Designed to be Twist Inserted Anywhere Along the Slot Side of the Channel (5)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (14)
  • To positively bond conduit to box or enclosure (45)
  • To provide a liquidtight, dust tight connection between flexible, non-metallic conduit and a box or an enclosure (3)
  • To provide a liquidtight; dust tight connection between flexible, non-metallic conduit and a box or an enclosure. (1)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (5)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertight. Suitable for Aluminum and Steel Rigid Conduit (2)
  • Trace Fire Alarm;Health Care Dedicated Circuits;Data Transmission;Communications Wiring;Computer Power Circuits and any other Designated System (7)
  • Underground or Aboveground (3)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (16)
  • Used in extremely high temperature applications such as commercial ovens and refrigeration, industrial furnaces and foundries (4)
  • Used to connect rigid metal conduit or IMC to a threqadless opening in an enclosure. (3)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (56)
  • Wet Location (14)
  • Show More...

• Package Quantity

  

  • 1 ct (42)
  • 1 CT;10 PK (3)
  • 1 CT;100 PK (2)
  • 1 CT;12 PK (3)
  • 1 CT;2 Pk (6)
  • 1 CT;25 PK (3)
  • 1 CT;5 PK (13)
  • 1 CT;50 Pk (2)
  • 1 CT;6 Pk (4)
  • 10 CT (36)
  • 10 CT;50 PK (15)
  • 10 PK;1 CT (4)
  • 10 PK;50 PK (3)
  • 10/100 PK (3)
  • 100 CT (9)
  • 100 CX (2)
  • 100 PK (9)
  • 100 RE (2)
  • 1000 RE (3)
  • 2 CT (21)
  • 2 CT;10 PK (8)
  • 2/10 PK (4)
  • 20 CT;100 PK (3)
  • 20 CT;200 PK (2)
  • 25 CT (19)
  • 25 CT;100 PK (7)
  • 25 CT;50 PK (13)
  • 25 CX (3)
  • 25 PK (3)
  • 30 CT (3)
  • 5 CT (23)
  • 5 CT;10 PK (7)
  • 5 CT;20 PK (4)
  • 5 CT;25 PK (19)
  • 5 CT;50 PK (2)
  • 5 PK;25 PK (2)
  • 5/25 PK (2)
  • 5/50 PK (2)
  • 50 CT (15)
  • 50 FT/CX (2)
  • 50 PK (2)
  • 500 RE (2)
  • Show More...

• Weight

  

  • 0.08 lb/EA (2)
  • 0.2 lb/EA (2)
  • 0.25 lb/100 ft (2)
  • 0.87 lb/EA (3)
  • 0.93 lb/EA (2)
  • 0.99 lb/EA (2)
  • 1.3 lb/EA (2)
  • 1.71 lb/EA (3)
  • 10 lb (3)
  • 13 lb/100 (2)
  • 131 lb/100 ft (2)
  • 136 LB PER 100 FT (1)
  • 14 lb (3)
  • 15 lb (3)
  • 155 lb/100 (2)
  • 16 lb/100 (2)
  • 176.4 lb/100 (2)
  • 18 LB PER 100 FT (1)
  • 18 lb/100 (2)
  • 18 lb/100 ft (4)
  • 19 lb (3)
  • 21 lb/100 (2)
  • 217 Pound per 100 Foot (2)
  • 23 lb/100 ft (3)
  • 25 LB PER 100 FT (2)
  • 25 lb/100 (2)
  • 28.7 lb/100 (2)
  • 29 lb/100 ft (3)
  • 30 lb/100 ft (2)
  • 32 lb/100 (2)
  • 32 Pound per 100 Foot (2)
  • 37.5 lb/100 (5)
  • 39 LB PER 100 FT (2)
  • 39.7 lb/100 (3)
  • 4 lb (2)
  • 4.05 lb/EA (2)
  • 4.45 lb/EA (2)
  • 4.53 lb/EA (2)
  • 44.1 lb/100 (2)
  • 5 lb (4)
  • 5.33 lb/EA (2)
  • 58 lb/100 ft (2)
  • 7 lb (3)
  • 73 LB PER 100 FT (1)
  • 73 lb/100 ft (2)
  • 85 Pound per 100 Foot (2)
  • 9 lb/100 (2)
  • 95 lb/100 ft (2)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (1)
  • ADHESIVES (4)
  • AEROSOLS (1)
  • ALL PLASTIBOND FITTINGS (29)
  • All Recessed Cans & Trims (8)
  • ALUM BUILDING WIRE (1)
  • ALUMINUM RIGID CONDUIT (7)
  • ANCHORS & ANCHOR KITS (1)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (37)
  • Conduit & Raceways (1)
  • Conduit & Raceways - Pvc Conduit, Fittings, & Boxes (3)
  • CONDUIT HANGERS/STAND OFF STRAPS (5)
  • CORD CONNECTORS & CORD GRIPS (44)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (11)
  • DIECAST EMT FITTINGS (134)
  • EMT Conduit (7)
  • EMT ELBOWS (28)
  • FLEX & MC FITTINGS (41)
  • FORM 5 CONDULETS, COVERS, & GASKETS (83)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (40)
  • Fuses & Fuse Accessories (29)
  • GRC Conduit (12)
  • HAND TOOLS (1)
  • HAZARDOUS LOCATION FITTINGS (15)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (1)
  • IMC Conduit (10)
  • LED HAZARDOUS LOCATION & VAPOR TIGHT LIGHTING (6)
  • Liquid Tight (126)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (9)
  • METALLIC FITTINGS (258)
  • NON-METALLIC FITTINGS (84)
  • NON-METALLIC SEALTITE AND FITTINGS (21)
  • OILTIGHT OPERATORS.30MM (26)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (1)
  • Plastibond, Fiberglass Conduit & Fittings (2)
  • PLASTIC BOXES (2)
  • PVC & ENT (1)
  • PVC Schedule 40 Conduit (2)
  • RIGID COUPLINGS (25)
  • RIGID ELBOWS (49)
  • RIGID GALVANIZED CONDUIT (8)
  • RIGID NIPPLES (253)
  • RIGID STRAPS & CLAMPBACKS (1)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • SLB'S & JAKE ELL'S (2)
  • Stainless Rigid Conduit (5)
  • Stainless Steel EMT Conduit (4)
  • STEEL BOXES & COVERS (15)
  • STEEL EMT FITTINGS (27)
  • STEEL GREENFIELD (4)
  • STRUT STRAPS (8)
  • TIMERS (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (11)
  • Show More...

• Manufacturer Status

  

  • Inactive (1)
  • Non-Stock (47)
  • Show More...

• Used On

  

  • EMT CONDUIT (3)
  • Liquid Tight Conduit (3)
  • Liquidtight Conduit (8)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (14)
  • RIGID CONDUIT (112)
  • RIGID/IMC CONDUIT (1)
  • Show More...

• Number Of Hubs

  

  • 1 (14)
  • 2 (42)
  • 3 (16)
  • 4 (5)
  • Show More...

• Hub Location

  

  • 90º (32)
  • Cross (5)
  • Straight (10)
  • Tee Side (16)
  • Show More...

• Applicable Standard

  

  • ANSI C80.1 (50)
  • ANSI C80.1, Federal Specification WW-C-563 (32)
  • ANSI C80.1, NEMA (80)
  • ANSI C80.1, NEMA RN-1 (3)
  • ANSI C80.3, Fed Spec WW-C-563 (3)
  • ANSI C80.3, Federal Specification WW-C-563 (5)
  • ANSI C80.3, WW-C-563 (23)
  • ANSI/NFPA 70, NEC (3)
  • ANSI/NFPA-70, NEC 350 (1)
  • ANSI/NFPA-70, NEC 356 (1)
  • ANSI/NFPA-70/79, NEC, ARRA (3)
  • ISO 9001 (10)
  • NEC 501-4B, NEC 351A (2)
  • NFPA-79 (4)
  • Show More...

• Minimum Qty

  

  • 10 (56)
  • 100 (10)
  • 150 (1)
  • 175 (1)
  • 200 (2)
  • 25 (1)
  • 50 (4)
  • Show More...

• Jacket Material

  

  • PVC (15)
  • THERMOPLASTIC PVC (6)
  • Show More...

• Type

  

  • 45 DEG Conduit Elbow (6)
  • 45 Degree (7)
  • 45 Degree Liquidtight Non-Insulated Connector (3)
  • 90 DEG (1)
  • 90 DEG Conduit Elbow (12)
  • 90 Deg Corner Pulling Elbow (2)
  • 90 Degree (9)
  • 90 Degree Liquidtight Non-Insulated Connector (6)
  • Aluminum Die Cast, Watertight Hubs, Insulated and Gasketed (3)
  • Break apart conduit clamp (2)
  • Bullet-45 Degree (4)
  • Bullet-90 Degree (4)
  • Bullet-Straight (6)
  • Close (2)
  • Close Length Conduit Nipple (10)
  • COMPRESSION (2)
  • CONDUIT (1)
  • Conduit Body (1)
  • Conduit Clamps (1)
  • Conduit Coupling (9)
  • Conduit Elbow (21)
  • Conduit Nipple (82)
  • Conduit outlet body (63)
  • Conduit sealing fitting (13)
  • Conduit-PVC Coated (3)
  • CONNECTOR (41)
  • Connectors-45 Degree (15)
  • Connectors-90 Degree (30)
  • Connectors-Straight (32)
  • DRAIN (2)
  • EDGE (2)
  • EMT Conduit Fittings (13)
  • EXTRA FLEXIBLE (4)
  • FITTING (1)
  • FLEXIBLE (6)
  • FMC (2)
  • FMC-RWS (4)
  • FMC-SWp (2)
  • Gang Boxes (1)
  • Grounding Bushings & Accessories (3)
  • Grounding Connectors-45 degree (14)
  • Grounding Connectors-90 degree (13)
  • Grounding Connectors-Straight (16)
  • Housing (5)
  • LA (4)
  • LARGE RADIUS (1)
  • LB (2)
  • LFMC (8)
  • LFNC (6)
  • LINEAR (1)
  • Liquid Tight Flexible Metallic Conduit (4)
  • Liquidtight connector (120)
  • Liquidtight Fittings (12)
  • Liquid-tight flexible metal conduit (8)
  • Liquidtight Flexible Metal Conduit Fittings (1)
  • Liquid-tight flexible non- metallic conduit (3)
  • Liquidtight Flexible Non-Metallic Conduit (4)
  • Liquidtight Sealing Gasket (6)
  • Low Profile Strain Relief Cord Connector (4)
  • LTMN (4)
  • LTM-UL (14)
  • Masonry Box (4)
  • Masonry Boxes (4)
  • Metallic Liquidtight Fittings (1)
  • Octogonal Boxes (3)
  • Outlet Boxes (4)
  • PARALLEL (13)
  • Pipe Hanger (4)
  • Pipe Straps, Pipe Clamps & Hangers (Series 700) (4)
  • PUSHBUTTON (17)
  • Push-In Connector (16)
  • PVC - Sch 40/80 (3)
  • Rainproof Enclosure (1)
  • Recessed Service (2)
  • Reducing Washer (3)
  • RIGHT ANGLE (21)
  • Sconce Box (4)
  • Sealing Gasket Assembly for Liquidtight Flexible Metal Conduit Connectors (2)
  • SET SCREW (1)
  • Snap-on (3)
  • SPECIAL RADIUS (16)
  • ST Series 45 DEG Liquidtight Connector With Plain Throat (3)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (13)
  • ST Series Straight Liquidtight Connector With Plain Throat (13)
  • STANDARD RADIUS (21)
  • STB Series Straight Liquidtight Connector With Insulated Throat (2)
  • Steel Cord Grips (1)
  • STNM Series 90 DEG Liquidtight Connector (5)
  • STNM Series Straight Liquidtight Connector (5)
  • STRAIGHT (91)
  • Straight Connector (1)
  • Straight Liquidtight Non-Insulated Connector (7)
  • Straight Liquidtight Strain Relief Connector (9)
  • Strain Relief Cord Connectors-Straight (9)
  • THREADED (1)
  • THREADED FEMALE (13)
  • Threaded Hubs (4)
  • Three-piece conduit coupling (3)
  • Transition (6)
  • Type A-Non-Metallic Liquidtight Conduit (6)
  • Vapor Tite (1)
  • Wire Mesh Strain Relief (2)
  • Zinc Fitting (3)
  • Show More...

• Bend Angle

  

  • 05156 (8)
  • 15 Degree (4)
  • 22 Degree (4)
  • 22-1/2 IN (4)
  • 30 DEG (3)
  • 30 Degree (7)
  • 37373 (8)
  • 45 DEG (6)
  • 45 Degree (14)
  • 90 DEG (1)
  • 90 Degree (46)
  • Show More...

• Standard Package

  

  • 1 PER CASE (73)
  • 10 (5)
  • 10 PER CARTON (47)
  • 10 PER CASE (5)
  • 100 PER CASE (1)
  • 100 W (1)
  • 12 (5)
  • 15 (3)
  • 15 PER CARTON (4)
  • 15 PER CASE (2)
  • 190 Ft (3)
  • 2 (1)
  • 2 PER CASE (1)
  • 20 (7)
  • 20 PER CARTON (6)
  • 20 PER CASE (4)
  • 25 (2)
  • 25 PER CARTON (112)
  • 25 PER CASE (44)
  • 250 VAC (1)
  • 2710 Foot (2)
  • 3 in (2)
  • 3 PER CARTON (2)
  • 30 (1)
  • 30 PER CARTON (2)
  • 30 PER CASE (4)
  • 35 per Case (2)
  • 370 Ft (2)
  • 4 (4)
  • 4 PER CARTON (7)
  • 40 (3)
  • 40 PER CARTON (2)
  • 40 PER CASE (1)
  • 5 in (2)
  • 5 PER CARTON (19)
  • 50 FT (5)
  • 50 PER CARTON (4)
  • 50 PER CASE (15)
  • 6 (1)
  • 6 PER CARTON (2)
  • 8 PER CASE (1)
  • 8 W (2)
  • 910 Foot (3)
  • BULK (19)
  • CARTON (4)
  • REEL (4)
  • SMALL CARTON (4)
  • Show More...

• Configuration

  

  • C (10)
  • LB (16)
  • LL (9)
  • LR (7)
  • T (11)
  • TB (5)
  • X (5)
  • Show More...

• Hub Size

  

  • 1 (2)
  • 1 in (14)
  • 1/2 in (10)
  • 1-1/2 in (13)
  • 1-1/4 in (6)
  • 2 in (12)
  • 2-1/2 in (2)
  • 3 in (3)
  • 3/4 in (14)
  • 4 in (2)
  • Show More...

• Shape

  

  • C (10)
  • LB (16)
  • Linear (1)
  • LL (9)
  • LR (7)
  • Rectangular (5)
  • Round (6)
  • T (11)
  • TB (5)
  • X (5)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 and 2 Group C D;Class II Div 1 and 2 Group E F G;Class III (13)
  • NEMA 4;4X;12;13 (2)
  • Show More...

• Connector Type

  

  • Compression (2)
  • Liquidtight (14)
  • LiquidTight, Insulated (3)
  • Nonmetallic (1)
  • STRAIGHT (12)
  • Straight Nonmetallic (7)
  • Straight, Insulated (3)
  • Show More...

• Size

  

  • 0.375 (2)
  • 1 (17)
  • 1 1/2 (3)
  • 1 1/4 (3)
  • 1 INCH (27)
  • 1 PH (2)
  • 1/2 (17)
  • 1/2 in (3)
  • 1/2 INCH (30)
  • 1-1/2 (7)
  • 1-1/2 IN Rating (3)
  • 1-1/2 INCH (13)
  • 1-1/2 Inches (1)
  • 1-1/4 (4)
  • 1-1/4 IN Rating (2)
  • 1-1/4 INCH (16)
  • 1-1/4 Inches (1)
  • 16 Ounce (1)
  • 2 (7)
  • 2 1/2 (2)
  • 2 A (3)
  • 2 INCH (17)
  • 2-1/2 (3)
  • 2-1/2 in (2)
  • 2-1/2 Inch (6)
  • 2-1/2 Inches (1)
  • 3 (6)
  • 3 1/2 (2)
  • 3 in (2)
  • 3 INCH (8)
  • 3/4 (15)
  • 3/4 in (5)
  • 3/4 INCH (27)
  • 3/8 (3)
  • 3/8 IN Flex, 1/2 IN Hub (3)
  • 3/8 INCH (9)
  • 30.5 MM (1)
  • 3-1/2 in (2)
  • 3-1/2 Inch (1)
  • 3-3/4 Inches Length x 1-7/8 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 2-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 5-9/16 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 7-3/8 Inches Width x 3-1/2 Inches Depth (1)
  • 4 (7)
  • 4 INCH (8)
  • 4 Inches (1)
  • 4 Inches Diameter x 3-1/2 Inches Depth (1)
  • 40 mm (3)
  • 65 mm (1)
  • 798 (3)
  • L(0.978) x W(0.978) x H(1.963) (2)
  • L(1.420) x W(1.420) x H(2.376) (2)
  • L(1.664) x W(1.664) x H(2.425) (2)
  • L(1.890) x W(1.890) x H(2.530) (2)
  • L(2.682) x W(3.645) x H(3.645) (2)
  • L(2.874) x W(4.107) x H(4.107) (2)
  • Show More...

• Temperature Rating

  

  • 105 C (2)
  • 140 (3)
  • 176 (9)
  • -22 TO 176 DEG F, 140 DEG F (OIL) (2)
  • -30 to 80 Deg C (Dry), 60 Deg C (Wet), 70 Deg C (Oil) (3)
  • -4 TO 140 DEG F (7)
  • 80 DEG C (3)
  • Show More...

• Style

  

  • 30.5 mm (5)
  • B (3)
  • B LFNC (1)
  • CNP (2)
  • EFST (4)
  • Extra Flexible (2)
  • LA (3)
  • Titan(R) EF (16)
  • Titan2(TM) UL (5)
  • Type B (8)
  • UA (2)
  • UL (1)
  • Ultratite(R) NM (4)
  • Utilitarian/Commodity (1)
  • Show More...

• Depth

  

  • 1-1/2 (1)
  • 2-1/8 (5)
  • Show More...

• Ground Type

  

  • COPPER WIRE (2)
  • NO GROUNDING (4)
  • Show More...

• Construction

  

  • 1 (2)
  • Die-Cast (3)
  • Drawn (4)
  • IP66 (2)
  • New Construction (4)
  • ONE PIECE (4)
  • Remodel (2)
  • TWO PIECE (2)
  • Welded (2)
  • Show More...

• Lamp Type

  

  • Incandescent (6)
  • LED - Static (1)
  • MEDIUM BASE (1)
  • Show More...

• Cable Entry

  

  • Knockouts (1)
  • Through Rigid conduit into throat of fitting (4)
  • Show More...

• Mounting

  

  • Between Enclosure and Conduit (1)
  • CEILING (1)
  • CHANNEL (2)
  • HORIZONTAL/VERTICAL (4)
  • Recessed (6)
  • SURFACE (1)
  • Surface Mount (1)
  • Show More...

• Voltage Rating

  

  • 120 (1)
  • 300 (1)
  • 600 V (4)
  • 600V (3)
  • Show More...

• Outer Diameter

  

  • 0.69 TO 0.71 INCH (1)
  • 0.82 TO 0.84 INCH (3)
  • 0.84 INCH (3)
  • 0.92 Inch (2)
  • 1.03 TO 1.05 INCH (4)
  • 1.05 INCH (2)
  • 1.13 INCH (1)
  • 1.29 TO 1.315 INCH (1)
  • 1.395 INCH (1)
  • 1.74 INCH (2)
  • 1.9 Inch (2)
  • 1.98 INCH (2)
  • 2.34 TO 2.375 INCH (2)
  • 2.455 INCH (2)
  • 2.955 INCH (3)
  • 4.58 Inch (2)
  • Show More...

• Wattage

  

  • 32 W (1)
  • 33 W (1)
  • 44/28/18 (2)
  • 75 W (3)
  • 90 W (3)
  • Show More...

• Capacity

  

  • 10-3/4 cu.in (Vertical);12-1/4 cu.in (Horizontal) (2)
  • 19 cu.in (Vertical);22-3/4 cu.in (Horizontal) (2)
  • Show More...

• Thickness

  

  • 15/64 (2)
  • 3/16 (2)
  • Show More...

• Inner Diameter

  

  • 0.484 TO 0.504 INCH (1)
  • 0.62 TO 0.64 INCH (1)
  • 0.622 TO 0.642 INCH (2)
  • 0.632 Inch (2)
  • 0.642 Inch (2)
  • 0.815 TO 0.835 INCH (2)
  • 0.82 TO 0.84 INCH (2)
  • 0.836 INCH (1)
  • 1.041 TO 1.066 INCH (1)
  • 1.063 INCH (1)
  • 1.394 INCH (2)
  • 1.61 Inch (2)
  • 1.624 INCH (2)
  • 2.02 TO 2.045 INCH (2)
  • 2.083 INCH (2)
  • 2.489 INCH (3)
  • 4.05 Inch (2)
  • Show More...

• Knockouts

  

  • 0 (2)
  • 17 (2)
  • Yes (1)
  • Show More...

• Height

  

  • 1 (3)
  • 1.37 in (1)
  • 1.375 in (1)
  • 1.8 in (1)
  • 1-7/8 (3)
  • 2.05 in (2)
  • 2.1 (1)
  • 2.25 (1)
  • 2.25 in (5)
  • 2.4375 in (3)
  • 2.625 in (2)
  • 2.65 in (4)
  • 2.75 (1)
  • 2.75 in (1)
  • 2.83 in (1)
  • 2.875 in (1)
  • 3 in (2)
  • 3.125 in (1)
  • 3.1875 in (1)
  • 3.2 (1)
  • 3.3125 in (1)
  • 3.5 (1)
  • 3.5 in (3)
  • 3.5625 in (3)
  • 3.6875 in (1)
  • 3-1/2 in (3)
  • 4 in (1)
  • 4.12 in (1)
  • 4.125 in (2)
  • 4.25 in (1)
  • 4.5 (2)
  • 4.625 in (1)
  • 4.7 (1)
  • 5 in (1)
  • 5.25 (1)
  • 5.4 in (1)
  • 5.75 (1)
  • 6.125 in (1)
  • 7.0625 in (1)
  • 7.75 (2)
  • Show More...

• Trade Size - Fractional

  

  • 1 (3)
  • 1/2 (1)
  • 1-1/2 (1)
  • 1-1/4 (1)
  • 2 (2)
  • 2 A (1)
  • 3 in (2)
  • 3/4 (3)
  • 3/8 (1)
  • 4 (1)
  • Show More...

• Trade Size In Inch

  

  • .375 (1)
  • .5 (1)
  • .75 (2)
  • 1 (3)
  • 1.25 (1)
  • 1.5 (1)
  • 2 (2)
  • 2 A (1)
  • 3 in (2)
  • 3/4 (1)
  • 4 (1)
  • Show More...

• Number Of Gangs

  

  • 1 (2)
  • 2 (1)
  • 3 (1)
  • Show More...

• Number Of Lamps

  

  • 1 (1)
  • 2 (1)
  • N/A (2)
  • Show More...

• Number Of Knockouts

  

  • 10 (1)
  • 16 (1)
  • 22 (1)
  • 8 (1)
  • Show More...