Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • #6 Anchor Kit Wall Driller ( Zinc ) Includes Phillips (2)
  • #8 Anchor Kit Wall Driller ( Zinc ) Includes Phillips (2)
  • 1/2" Staples Plastic Insulated 2 Conductor Romex 14-2 (2)
  • 12-10 Awg Vinyl Insulated Locking Spade, 50 Per Pack (3)
  • 16-14 Awg Vinyl Insulated Locking Spade, 100 Per Pack (2)
  • 2 Position Bridge (3)
  • 22-18 Awg Vinyl Insulated Locking Spade, 100 Per Pack (2)
  • 225A FD Collar Kit_(3) Terminals and (2)
  • 3/4" Staples Plastic Insulated 2 Conductor Romex 12-3 (2)
  • 3M™ Cold Shrink 3-Conductor Breakout Kits 3C-Bok Series (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3G Series For (2)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3-RJS Series F (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-S, 7680-S & 7690 (10)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-T & 7690-T Serie (9)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (8)
  • 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 (23)
  • 3M™ Highland™ Nylon Fully Insulated Butted Seam Female Disco (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Ring Tongues (7)
  • 3M™ Rejacketing Sleeves RJS Series (5)
  • 3M™ Thin-Wall Heat Shrink Tubing Eps-300 (5)
  • 4 Wire Ground TB 1.5 MM2 (2)
  • 5 Position Bridge (2)
  • AMT Connector (2)
  • Anchor Kit (5)
  • Anchor Setting Tool (1)
  • Automatic Tension Splice Connector (2)
  • Barrier Strip (3)
  • Beam Clamp (2)
  • Black Fine Point Marker (2)
  • Black Medium Point Marker (2)
  • Butt Connector (1)
  • Butt Splice (7)
  • Butt Splice Connector (13)
  • Cable Connector (2)
  • Cable Staple (2)
  • Ceiling Wire (1)
  • CMP Lug Cu Long 6 Awg 1/4 BLT 5/8 SPC (2)
  • Compression (35)
  • Compression Connector (7)
  • Compression Lug (23)
  • Compression Splice (3)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Concrete Anchor System (3)
  • Conductor Lug (11)
  • Conduit Fastener (1)
  • Conduit Support (1)
  • Conduit to Beam Fastener (1)
  • Conduit to BM FS, 1" Emt, 3/4" Imc, Rigid, 1/8" to 1/4" Flan (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to Conduit Fastener (2)
  • Copper Comp. Lug, 2 Hole, #2 Awg Flex, 1 (2)
  • Copper Compression Lug (5)
  • Copper Connector (3)
  • Crimp On Wire Connector (1)
  • Cross Connector (1)
  • C-Tap (1)
  • C-Type Copper Compression Tap (8)
  • D4/6.P.2L (2)
  • Disconnect Terminal (2)
  • Distribution Block (1)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drop in Anchor (2)
  • Drywall Screw (4)
  • Dual Rated Transformer Lugs 600 MCM - 2 Awg (2)
  • Duct Tape (1)
  • Ed/Edh/Edc 225A Max 300 MCM Al Kit (2)
  • End Bracket (2)
  • End Cover (6)
  • End Plate (2)
  • End Section (1)
  • End Stop For 35MM Rail - One Screw Mount (2)
  • Eye Bolt (1)
  • F FRM Cu/Al Pressureterm 4 #14-1/0 (2)
  • Feed Through Terminal (6)
  • FEM8D2S End Plate (2)
  • Female Disconnect (3)
  • Female Disconnecter Terminal (3)
  • Female Disconnector (5)
  • Fender Washer Kit (1)
  • Flex Lug (2)
  • Flexible Component Label (2)
  • Fluorescent Fixture Hanger (1)
  • Fork Terminal (13)
  • Fuse Terminal Block (1)
  • Heat Shrink Splice (1)
  • Heat Shrink Tube (5)
  • Heat Shrink Tube Label (2)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • Hex Nut (4)
  • H-Type Compression Connector (9)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Butt Splice (4)
  • Insulated Ferrule (4)
  • Insulation Displacement Connector (2)
  • Insulation Piercing Connector (1)
  • Insulation-Tap Connector (9)
  • K-Lath Screw (3)
  • Kwikwire Accessory, Bolt Style SGL Type (2)
  • Kwikwire Accessory, Toggle Style Y Type (2)
  • Label (3)
  • Lag Screw (2)
  • Lay-In Connector (2)
  • Line and Load Terminal (1)
  • Line Measuring Tape (5)
  • Linemeasuring Tape (5)
  • Linerless Rubber Tape (4)
  • Locking Fork (4)
  • Long Barrel Lug (11)
  • Lug (2)
  • M4/8 D2SFL 110/220V Ac (2)
  • Machine Screw (5)
  • Machine Screw Anchor (2)
  • Machine Screw Kit (1)
  • Male Disconnect (1)
  • Male Tab (1)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (17)
  • Mechanical Grounding Connector (1)
  • Metal Piercing Screw (2)
  • Mounting Rail (1)
  • Multi-Cable Staple (2)
  • Multi-Conductor Terminal Block (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Non Insul Ring NO8 , 1/4 Mount (2)
  • Non-Metallic Cable Connector (2)
  • Nut (1)
  • Nylon Label (2)
  • Panelboard Lug (3)
  • Partition Plate (2)
  • Pin Terminal (2)
  • Pipe Wrap (1)
  • Plug-In Bridge (2)
  • Polaris Vision Tap (Clear) 3/0-6 Awg Polaris Insulated Tap C (2)
  • Polaris Vision Tap (Clear) 4-14 Awg Polaris Insulated Tap CO (2)
  • Power Cable Termination (4)
  • Power Distribution Block (15)
  • Power Splicer and Stud Block (1)
  • Power Stud Block (1)
  • Power Terminal Block (2)
  • Pre-Printed Wire Marker Book (2)
  • Purlin Clip (1)
  • Ring Terminal (10)
  • Ring Tongue Compression Terminal (5)
  • Rod & Wire FS (2)
  • Roof Flashing (2)
  • Roof Jack (2)
  • RUN/TAP (6)
  • Scotch® Linerless Rubber Splicing Tape 130C (4)
  • Screw Connection Single Level-Through-Feed (7)
  • Self Drilling Screw (3)
  • Service Entrance Compression Splice (5)
  • Service Post Connector (4)
  • Sheet Metal Screw (2)
  • Single Barrel Lug (4)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Sleeve Anchor (4)
  • Spade Terminal (1)
  • Splice (31)
  • Splice Cap Insulator (1)
  • Splice Connector (2)
  • Splice Kit (1)
  • SPLICE REDUCER (6)
  • Splicer Power Block (1)
  • Splicer Reducer (3)
  • Splicing Connector (2)
  • Split Bolt Connector (34)
  • Standard Barrel Lug (17)
  • Standard Barrel Single Hole Compression Lug (18)
  • Staple (7)
  • Submersible Connector (2)
  • Tap Bolt (3)
  • Tapered Anchor (1)
  • Terminal (148)
  • Terminal Block (3)
  • Terminal Kit (1)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Terminal Strip (5)
  • Thin Wall Heat Shrink Tube (3)
  • Thin Wall Shrink Tube (3)
  • Tie Wire (2)
  • Toggle Bolt (1)
  • Transformer Lug (1)
  • Twist-On Wire Connector (1)
  • Two Barrel Lug (2)
  • Two-Way Splice Connector (9)
  • Universal End Stop (2)
  • Wall Driller Anchor Kit (3)
  • Web Strap (1)
  • Wedge Anchor (8)
  • Wing Wire Connector (5)
  • Wire Clip (4)
  • Wire Connector (2)
  • Wire Marker Book (4)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (4)
  • Wood Rocket Kit (1)
  • Zamac Anchor (4)
  • Show More...

• Brand

  

  • 3M (1)
  • 3M Electrical Products (73)
  • AB (1)
  • ABB (52)
  • Blackburn Mechanical (90)
  • BRADY (5)
  • Brady® (10)
  • Bridgeport (1)
  • Buchanan (5)
  • BURNDY (252)
  • Catamount (27)
  • COLOR-KEYED (49)
  • Connector Bloks(TM) (16)
  • Dottie (4)
  • DOTTIE L H COMPANY (1)
  • DYMO (4)
  • Eaton (126)
  • EATON B-LINE SERIES (1)
  • Eaton Corp (9)
  • EATON CUTLER-HAMMER (54)
  • Engineered Products CO. (1)
  • Gardner Bender (15)
  • Highland (10)
  • Ideal (22)
  • Ilsco (26)
  • L.H. Dottie CO. (8)
  • LH DOTTIE (177)
  • milwaukee (1)
  • Milwaukee® (5)
  • Minnesota Mining (3M) (21)
  • Newell (Dymo) (5)
  • NSi (5)
  • Nsi Industries (441)
  • PANDUIT (151)
  • Panduit Corporation (7)
  • Panduit® (88)
  • Platinum Tools (8)
  • Polaris (3)
  • Scotch (12)
  • ScotchCode (2)
  • Scotchlok (27)
  • Selecta Products (4)
  • Shrink-Kon (1)
  • Spec-Kon (10)
  • Sta-Kon (141)
  • T&B Elec Suppl (2)
  • Thomas & Betts (2)
  • Viton(R) (2)
  • WAGO CORPORATION (2)
  • Weidmuller, Inc. (13)
  • XX-Marathon Special Products (4)
  • Show More...

• Sub Brand

  

  • 3M(R) (5)
  • 3M(TM) (13)
  • Aluminum Compression (2)
  • Blackburn (67)
  • Burndy (25)
  • Color-Keyed (47)
  • DYMO (5)
  • Entrelec (11)
  • Highland(TM) (13)
  • Inkzall(TM) (4)
  • Klippon(R) (13)
  • L.H. Dottie CO (2)
  • Mechanical Connector (3)
  • NSI (41)
  • Panduit Corp (2)
  • Pan-Lug (3)
  • Polaris Black (19)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Powerplug(R) (2)
  • Scotch(R) (4)
  • Spec-Kon (4)
  • Split Bolts (10)
  • Sta-Kon (35)
  • Type CTAPF (2)
  • Type HSTT (2)
  • Type LAM (2)
  • Type LAMA (4)
  • Type LCA (5)
  • Type LCC (9)
  • Type LCCX (5)
  • Type LCD (6)
  • Type Sbc (8)
  • Show More...

• Minimum Conductor Size

  

  • #10 AWG (2)
  • #12 AWG (24)
  • #14 AWG (28)
  • #14 AWG (Stranded) (9)
  • #14 AWG (Stranded);#12 AWG (Solid) (2)
  • #16 AWG (12)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #18 AWG (6)
  • #2 AWG (3)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Stranded) (3)
  • #22 AWG (6)
  • #24 AWG (3)
  • #26 AWG (9)
  • #4 AWG (12)
  • #4 AWG (Stranded) (7)
  • #6 AWG (35)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Stranded) (18)
  • #8 AWG (6)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Solid) (2)
  • #8 AWG (Stranded) (3)
  • (2) #16 AWG (2)
  • (2) #18 AWG (3)
  • 0.08 mm^2;28 AWG (2)
  • 16 AWG (1)
  • 22 AWG (1)
  • 250 MCM (6)
  • 26 AWG (5)
  • 4/0 AWG (1)
  • Show More...

• Number Of Circuits

  

  • 10 (1)
  • 12 (4)
  • 4 (1)
  • 6 (2)
  • 8 (1)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (4)
  • #1/0 AWG (2)
  • #1/0 AWG (Stranded) (2)
  • #10 AWG (23)
  • #10 AWG/4 sq.mm (6)
  • #12 AWG (2)
  • #12 AWG/2.5 sq.mm (3)
  • #14 AWG (18)
  • #16 AWG/1.5 sq.mm (2)
  • #18 AWG (4)
  • #2 AWG (16)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (Stranded) (7)
  • #3 AWG (Stranded);#2 AWG (Solid) (3)
  • #4 AWG (13)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (Stranded) (4)
  • #6 AWG (27)
  • #6 AWG (Stranded) (6)
  • #8 AWG (12)
  • #8 AWG (Stranded) (2)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #8 AWG (2)
  • 1/0 AWG (16)
  • 1/0 AWG (Stranded) (5)
  • 10 AWG (1)
  • 12 AWG (5)
  • 14 AWG (1)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (16)
  • 2/0 AWG (Stranded) (5)
  • 250 kcmil (9)
  • 250 kcmil (Stranded) (2)
  • 250 MCM (12)
  • 3/0 AWG (11)
  • 300 kcmil (2)
  • 300 MCM (1)
  • 350 kcmil (8)
  • 350 MCM (6)
  • 4/0 AWG (6)
  • 500 kcmil (4)
  • 500 MCM (9)
  • 600 kcmil (4)
  • 600 MCM (3)
  • 750 MCM (2)
  • 8 AWG (2)
  • Show More...

• Number Of Poles

  

  • 10 (2)
  • 12 (2)
  • 4 (1)
  • 6 (1)
  • 8 (2)
  • Show More...

• Number Of Secondary Openings

  

  • 1 (5)
  • 12 (1)
  • 2 (3)
  • 4 (3)
  • 6 (6)
  • Show More...

• Insulation Material

  

  • EPDM Rubber (2)
  • Nylon (8)
  • Plastisol (36)
  • PVC (2)
  • Vinyl (47)
  • Wemid (10)
  • Show More...

• Primary Opening Wire Size

  

  • #14 to #2/0 AWG (6)
  • #4 AWG to 500 MCM (2)
  • #6 AWG to 350 MCM (3)
  • #6 AWG to 500 MCM (3)
  • 3/8 INCH-16 TPI X 1-3/16 INCH L STUD (1)
  • 4 AWG (UL/CSA), 16 SQ MM (IEC) (1)
  • 4 AWG TO 500 MCM (1)
  • 6 AWG TO 250 MCM (1)
  • Show More...

• Conductor Material

  

  • Aluminum (24)
  • Aluminum;Copper (42)
  • Brass (5)
  • Brass with Copper Sleeve (4)
  • Copper (212)
  • Copper Alloy (Contacts) (2)
  • Copper/Aluminum (9)
  • Copper;Aluminum (47)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • High Copper Alloy (4)
  • Polyamide 66 (2)
  • Steel (3)
  • Show More...

• Secondary Opening Wire Size

  

  • #14 to #2/0 AWG (9)
  • #6 to #4/0 AWG (2)
  • 14 TO 10 AWG (UL/CSA), 2.5 TO 6 SQ MM (IEC) (1)
  • 3/8 INCH-16 TPI X 1-3/16 INCH L STUD (1)
  • 3/8 INCH-16 TPI X 1-5/8 INCH L STUD (1)
  • 6 AWG TO 250 MCM (1)
  • Show More...

• Insulation Color

  

  • Black (41)
  • Black (Code) (3)
  • Black (Die Color) (6)
  • Blue (28)
  • Blue (Code) (13)
  • Blue (Die Color) (5)
  • Brown (3)
  • Brown (Code) (6)
  • Brown (Die Color) (8)
  • Dark Beige (9)
  • Gray (17)
  • Gray (Code) (5)
  • Gray (Die Color) (5)
  • Green (4)
  • Green (Die Color) (3)
  • Green/Yellow (2)
  • Orange (4)
  • Orange (Code) (2)
  • Orange (Die Color) (3)
  • Pink (Code) (3)
  • Pink (Die Color) (3)
  • Purple (2)
  • Purple (Code) (3)
  • Purple (Die Color) (3)
  • Red (14)
  • Red (Code) (2)
  • Red (Die Color) (7)
  • Red/Yellow (2)
  • Silver (2)
  • Tan/Red (2)
  • Yellow (23)
  • Yellow (Code) (2)
  • Yellow (Die Color) (2)
  • Show More...

• Current Rating

  

  • 10/15/17.5 A (2)
  • 100 A (3)
  • 175 A (3)
  • 20/22/28/32 A (2)
  • 225 A (5)
  • 230 AMPERE (1)
  • 24 A (5)
  • 255 AMPERE (1)
  • 30 A (6)
  • 30/38/41 A (4)
  • 310 A (2)
  • 350 A (4)
  • 380 A (2)
  • 400 A (5)
  • 600 A (2)
  • 760 A (3)
  • 760 AMPERE (1)
  • 80 AMPERE (1)
  • 85 AMPERE (1)
  • Show More...

• Voltage Rating

  

  • 1000 V (3)
  • 1k VAC (7)
  • 2000 (15)
  • 24 VDC (2)
  • 300 (4)
  • 300 V (38)
  • 300, 400 (2)
  • 35 (139)
  • 35 kV (43)
  • 500 W (2)
  • 600 (117)
  • 600 V (485)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (7)
  • 600 V ac (28)
  • 600 Volt (6)
  • 600V (5)
  • 630V (2)
  • EN 550V, UL 600V, 800V connection (3)
  • IEC 250V, UL 300V (2)
  • IEC 500V, UL 150V (4)
  • IEC 800V, EN 550V, UL 600V (3)
  • IEC 800V, EN 700V, UL 600V (13)
  • NA (6)
  • UL 300V (2)
  • Show More...

• Number Of Conductors

  

  • 1 (68)
  • 10 (2)
  • 12 (2)
  • 2 (146)
  • 3 (30)
  • 4 (19)
  • 5 (7)
  • 6 (8)
  • 8 (5)
  • Show More...

• Material

  

  • 18-8 STAINLESS STEEL (3)
  • Aluminum (180)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum body -Glass Filled Polyester Base (2)
  • Aluminum body -Glass Filled Polyester Base (3)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • B-342 Polyolefin (2)
  • B-499 Nylon Cloth (3)
  • Brass (54)
  • Bronze Alloy (16)
  • Carbon Steel (2)
  • Clear Acrylic (3)
  • Cold Rolled High Carbon Steel (33)
  • Copper (672)
  • COPPER ALLOY (7)
  • Galvanized Steel (4)
  • Graphite Metallic Steel (5)
  • HEAT SHRINK (1)
  • IRON (1)
  • Lead (2)
  • Linerless EPR (4)
  • Low Carbon Steel (4)
  • NICKEL PLATED STEEL (1)
  • Nylon (19)
  • Nylon 66 (2)
  • Nylon Housing, Copper Alloy Contacts (2)
  • Nylon Insulation (13)
  • Plastic (7)
  • Plastic Housing (3)
  • Plastic-Impregnated Cloth (4)
  • Polyamide (38)
  • Polyester (9)
  • Polyolefin (12)
  • Polypropylene (4)
  • Polyvinyl Chloride (2)
  • Porcelain (2)
  • Pre-Galvanized Steel (2)
  • PVC (1)
  • Silicon Bronze (2)
  • SILICONE RUBBER (1)
  • Stainless Steel (5)
  • Steel (120)
  • Steel (Screw) (5)
  • Thermoplastic (4)
  • TIN PLATED ALUMINUM (1)
  • TIN PLATED BRASS (2)
  • TIN PLATED COPPER (5)
  • Tin-Plated Copper (25)
  • Vinyl (5)
  • Vinyl Cloth (2)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Insulation (32)
  • Zamac Alloy (10)
  • Zinc (7)
  • Show More...

• Cover Type

  

  • CC1432, CLEAR PLASTIC (1)
  • CC1433, CLEAR PLASTIC (1)
  • CC1453, CLEAR PLASTIC (1)
  • Clear Acrylic (15)
  • NO (2)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - 5/16 Mounting Hole (2)
  • # 1 AWG (STR) - CU Splice (2)
  • # 2 AWG (STR) - 1/4 Mounting Hole (2)
  • # 2 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 4 AWG (STR) - 1/4 Mounting Hole (2)
  • # 4 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (2)
  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (3)
  • # 8 AWG (STR) - # 10 Mounting Hole (2)
  • # 8 AWG (STR) - 3/8 Mounting Hole (3)
  • # 8 AWG (STR) - CU Splice (2)
  • (2) 2/0-14 AWG (Line Side) - (6) 4-14 AWG (Load Side) - 350 Amps Per Pole (2)
  • (2) 750-250 MCM - Dual Rated (2)
  • (8) 250 MCM-6 AWG - Dual Rated (2)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 1/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 1/0 AWG (STR) - CU Splice (2)
  • 10 pack (2)
  • 10 Replacement Sleeves Per Bag (3)
  • 2/0 AWG (STR) - # 1 Pin Size (2)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 1/2 Mounting Hole (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 250 MCM (STR) - CU Splice (2)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (3)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 3/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 3/0 AWG (STR) - CU Splice (2)
  • 300 MCM (STR) - 4/0 Pin Size (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (3)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (3)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 4/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 4/0 AWG (STR) - CU Splice (2)
  • 400 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (3)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 500 MCM (STR) - CU Splice (2)
  • 600 MCM (STR) - 400 Pin Size (2)
  • 750 MCM (STR) - 500 Pin Size (2)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (4)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Abrasion Resistant;Fire and Chemical Resistant (2)
  • Abrasion Resistant;Oil Resistant (2)
  • Accepts (2) 14 To (4) 10 AWG MC/AC Cable, 5/16 In and 3/8 In Flexible Conduit (2)
  • Accomodates Stranded cable, With Inspection window, Long barrel (2)
  • Adhesive Lined Flexible Pilyolefin (3)
  • Aggressive Adhesive;Harsh Environment;Outdoor Durable;Permanent Adhesive (2)
  • AL9CU- UL Listed for use with fine strand conductor (2)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Allows Conduit To Clear Drop Wires (2)
  • Anti-Roll Body Design (3)
  • Barrel Style Butted (4)
  • Bolt and nut of high-strength corrosion-resistant bronze alloy. Copper pressure bar. Bolt and nut of hex design (2)
  • Bolt and Nut of High-Strength Corrosion-Resistant Bronze Alloy;Copper Pressure Bar;Bolt and Nut of Hex Design (13)
  • Bolt and pressure bar of copper alloy, completely tin plated for corrosion resistance. Contoured spacer of electrolytic copper (6)
  • Catalog numbers ending with the suffix X indicate an expanded insulation grip. This means a wider wire entry to accommodate heavy wall insulation. Ring terminals Won't fall free even if the mounting screw loosens (3)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (3)
  • Color-Coded;Funnel-Shaped End Pieces Provide Instant Visual Identification of Maximum Conductor Size and Swiftly Guide Conductor into Position for Insertion;Pilot Caps Envelop Cable Strands and Guide the Conductors into the Center of the Splice (2)
  • Constructed from Aluminum For High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Prefilled with Oxide Inhibitor to Prevent Oxidation and Keep Out Moisture;All Splices are Color Coded and Marked with Strip Lengths (5)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (5)
  • Constructional Feature Abrasion Resistant;Standard Package 1 (4)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (5)
  • Corrosion Resistant (3)
  • Degree of protection: IP20 (5)
  • Dual Barrel Provides Termination of two Conductors;High Strength (2)
  • Dual Rated For Use With Copper And Aluminum Cable (3)
  • Easy Entry Copper Insulation Sleeve (5)
  • Easy Installation - no special tools required (8)
  • Easy Installation;No Special Tools Required (21)
  • Electro-Tin Plated (3)
  • Electro-Tin Plated for Low Contact Resistance (6)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Excellent for Grounding and Continuous loop Applications;Made of 6061T-6 Aluminum Alloy (2)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (3)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (2)
  • Features: 12 Gauge Steel, Rust Inhibitor, Finger Friendly (5)
  • Features: 12 Gauge Wire (4)
  • Features: 16 1/2 Gauge, 400 FT (3-1/2#), Black Annealed or Galvanized (2)
  • Features: All Splicer/Reducers Are Dual Rated For Use With Aluminum And Copper Conductors And Are Constructed From High Strength, Tin Plated Aluminum, PENTROX Oxide Inhibiting Joint Compounds Are Recommended For All Aluminum Applications, All Connectors Are Tin-Plated: Provide Low Contact Resistance And Prevents Galvanic Corrosion, Connectors Feature Rounded Bottoms: Facilitates Taping, Solid Center Barrier: Prevents Contact Of Dissimilar Metals, Large Screw Diameters: Ensures Greater Surface Contact With (3)
  • Features: All-Aluminum Electro-Tin Plated design eliminates possible bi-metallic corrosion and provides shortest connector length design possible for easy installation in equipment with limited space. Solid electro-tin plated aluminum plug makes properly connection easily. Smooth surface on the solic EC plug provides greater area contact establishing excellent conductivity. Solid plug has equivalent cross-sectional area as current carrying equivalent copper wire permitting use of larger aluminum wire to co (2)
  • Features: An Irreversible Compression Ground Grid Cross Connector Which Allows Adjustment Of The Compression Elements Prior To Installation, Only Six Connectors And Four Dies Are Required To Install All Combinations From 6 AWG Solid Through 500 KCMIL, UL467 Listed Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Dimensions In Brackets Represent Lightning Protection Conductors, Die Index: 997 Element A, 997 Element B, Conductor Type: Run: Commercial Stra (2)
  • Features: Any Head Style Screw can be Used (5)
  • Features: Better Shear Resistance than Plastic Pin, Zamac Alloy with Carbon Steel Screw Drive, Fast and Easy to Install (5)
  • Features: Clear Plastisol covered AL6061-T6 aluminum body, Saves time, lowers installation costs, eliminates taping, Oxide inhibitor pre-installed, Inhibits moisture and contaminants from entering the contact area (4)
  • Features: Clear Plastisol Covered Al6061-T6 Aluminum Body: Saves Time, Lowers Installation Costs, Eliminates Taping, Clear Plastisol: Allows Visual Confirmation That Conductor Is Properly Inserted, Oxide Inhibitor Pre-Installed: Inhibits Moisture And Contaminants From Entering The Contact Area, Range-Taking: Reduces Number Of Connectors Carried In Inventory, In-Line Splice/Reductions Are Made Quickly And Easily With The Unitap Line Of Connectors, UL486B Listed, Dual-Rated AL9CU For Any Stranded Copper Or S (2)
  • Features: Continuous Thread Allows for Take up Adjustment, Machine Bolt (4)
  • Features: Convenient Pocket-Size Booklets; Plastic-Impregnated Cloth Construction For Long-Lasting Durability; Resists Abrasion, Moisture, Dirt And Oil; Perforated 1-1/2 IN Markers Can Be Separated Into Half-Length Sizes; Self-Sticking On Wire And Cable; Non-Smear Black Legend Ensures High Visibility; For Applications Above Or Below Ground; Ten Pages Per Booklet, 10 Markers Per Legend; Adhesion: 45 OZ/IN Width Ultimate; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Corrosion and Chemical Resistant (2)
  • Features: Corrosion Resistant, Stainless can be Mildly Magnetic (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: Easy to Spot, Reusable, Deep Threads (7)
  • Features: For Machine Screws Anchors (3)
  • Features: For Proper Installation of Drop in Anchors (3)
  • Features: Grade 5 Medium Strength (2)
  • Features: HYLUG Type YAV Is A Seamless, Heavy Duty Uninsulated Compression Terminal Manufactured From Electrolytic Copper And Is For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, The Seamless Tubing Produces A Double Thick Tongue And Seamless Barrel Design Provides A Strong Connector For Demanding Applications Requiring High Reliability, Applications Include Aircraft, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To V (4)
  • Features: Includes Drill, Hex Head Slotted (7)
  • Features: Invincibox Up to 2 Inch (3)
  • Features: Invincibox upto 2 Inch (7)
  • Features: Invincibox upto 2 Inch, Tuff Pack (2)
  • Features: Irreversible Compression Ground Tap Can Be Used As A Tap Connector Or As A Tap Splice Connector, Four Die Sets And Eight Connectors Can Accommodate A Conductor Range From #8 AWG Solid Through 500 KCMIL Plus 1/2 IN, 5/8 IN, And 3/4 IN Copper Bonded Ground Rods, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Conductor Type: Run: Commercial Stranded Copper, Rebar, Ground Rod, Tap: Commercial Stranded Copper, Conductor Size (run - (2)
  • Features: Irreversible Compression Ground Tap Figure 6 Can Be Used As A Tap Connector Or As A Tap Splice Connector, Four Die Sets And Eight Connectors Can Accommodate A Conductor Range From #8 AWG Solid Through 500 KCMIL Plus 1/2 , 5/8 And 3/4 IN Copper Bonded Ground Rods, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y750, PAT750-18V Tool, PU998 Die, (1), Y45 Tool, PU998 D (2)
  • Features: Irreversible Compression Ground Tap Figure C Connectors, Accommodates All Cable Combinations From #6 AWG Solid Through 500 KCMIL, C- Shaped Opening Permits Placing Two Continuous Parallel Cables Into Conductor Groove, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Prefilled With PENETROX Compound And Strip Sealed, Certain Sizes Are Also UL467 Listed And CSA Certified For Wire To Ground Rod, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y35, Y39, Y750, PAT750 To (4)
  • Features: Lag Screws are used in Woodworking when Standard Wood Screws are too Short or too Small (3)
  • Features: Manufactured with Filtered Nylon 6/6, Angled Tail, One Piece Design, Transition Rails, And 3 Tooth Pawl, Rounded Edges, Finger Grips, Bulk Available (2)
  • Features: Medium Duty, Any Head Style Screw can be Used, The Screw can be Easily Removed or Loosened and Retightened (2)
  • Features: Metal Piercing, Invincibox upto 1-5/8 Inch, Tuff Pack (3)
  • Features: Range-Taking Connector: Lowers Inventory Requirements, Compact Size: Easy To Tape And Insulate Connection, Manufactured From High Conductivity Wrought Copper: Provides Low Resistance And Excellent Electrical Conductivity, Economical: Provides Low Installed Cost, 8A - Use CRIMPITS Accommodating 6 Stranded Copper, 6A - Use CRIMPITS Accommodating 4 Stranded Copper, 4A - Use CRIMPITS Accommodating 2 Stranded Copper, 2A - Use CRIMPITS Accommodating 1/0 And 2/0 Copper, Use PUADP-1 Adapter When Using U (3)
  • Features: Reusable Six Compartment Box, Handy Assortment (4)
  • Features: Self Drilling (3)
  • Features: Self Drilling, Invincibox Up to 2 Inch, Tuff Pack (3)
  • Features: Self Piercing, Self Tapping (2)
  • Features: Self-Drilling (4)
  • Features: Self-Sticking On Wire And Cable; Perforated 1/4 IN X 1-1/2 IN Markers; For Applications Above Or Below Ground; Resists Abrasion, Moisture, Dirt And Oil; Non-Smear Black Legend Ensures High Visibility; 10 Pages Per Booklet; Includes: 450 Wire Markers And 450 Terminal Markers (2)
  • Features: Self-Tapping, Bottom Mount (2)
  • Features: Silicon Bronze Harder than Brass used in Direct Burial (2)
  • Features: The INSULUG Type YAEV Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Term (3)
  • Features: The INSULUG Type YAEV-L Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Te (2)
  • Features: The Pre-Lubricated Tape Will Reduce Friction Levels And Eliminate Duct, Cutting A Common Issue With Conventional Polyester Ropes Rubbing Against Conduit Walls, Lower Elongation Reduces Pulling Time, Improves Safety For Workers, And Prevents Crus (2)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available;Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating (4)
  • Features: UL Listed 90 DEG C, 600 V To 35 KV 45 DEG, 90 DEG Angles Are Available, Tools, Die Set Catalog Number, And (number Of Crimps): MD6, OUR840, MD7-34R Mechanical: W26VT (2), W26RT (2), X26RT (2),BCT500HS, Y500CTHS Hydraulic: W26VT (2),W26RT (2), X25RT (2), X26RT (2), Y35, Y39, Y750, Y46, PAT750 Hydraulic:U26RT (1), Dieless: MY29-3 (1), MY29-11 (1), MRC840 (2), Y644HS (1), Y81KFT (1), Y81KFTMBH (1), PAT81KFT-18V (1), Wire Strip Length: 1 IN, Conductor Type: Commercial Stranded Copper, Tongue Angle: S (2)
  • Features: Unique, One-Step Drive Anchor, Zamac Alloy with Carbon Steel Screw Drive, Removable Screw (4)
  • Features: Used to Couple Threaded Rod for Extended Lengths (5)
  • Features: Used to Grounding Pigtails (2)
  • Features: Water-Tight Seal (3)
  • Features: Wedge Anchors can be Installed through the Fixture, Full Thread (12)
  • Features: Wood Rocket, Invincibox Up to 2 Inch (2)
  • Features: Wood Rocket, Invincibox Up to 2 Inch, Tuff Pack (2)
  • Ferrules ensure reliable electrical connections when terminating conductors in screw clamp terminal blocks (10)
  • Finished hex nuts are heavier (thicker) and are furnished in sizes 1/4 IN and up;Invincibox up to 1/2 IN;Zinc plated - general use (6)
  • Flame Retardant (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 15 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Ultimate Static Load Capacity 25 Lb (3)
  • Flexible, Polyolefin (17)
  • For Aluminum;Copper Concentric Conductors;Compact Code Aluminum Strandings (3)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For Cross Connections in The Bridge Shaft (3)
  • For Power Connector Applications up to 35KV (2)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Fully Insulated. Metal Insulation Sleeve. Molded Insulator. Internal Barrel Serrations. Funnel Entry. (2)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (8)
  • Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams (3)
  • Heavy-Wall Cable Sleeve;For Electrical Splices;Connections;For Indoor, Outdoor or Overhead Use;Direct Buried or Submersible;Insulating Secondary Splices;Relocation of Service;Dig-In Repairs;Sheath Repairs (8)
  • High Strength Solderless Service Connector (7)
  • Horizontal markings (3)
  • In butt splices, the wires are butted together and crimped at each end of the splice. These splices are color-coded according to wire size (3)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (3)
  • Industrial-Strength Tear-Proof Adhesive Resists Moisture, Extreme Temperatures (4)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Installs with standard wrenches (4)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (22)
  • Long Barrel (9)
  • Long Barrel Maximizes Number of Crimps and Provides Premium Wire Pull-Out Strength and Electrical Performance (7)
  • Long Barrel;High Conductivity (25)
  • Made from Heavy Wall, Extruded, High Conductivity Copper;For Power Connector Applications up to 35kv (6)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (9)
  • Made of High Copper Alloy;Re-usable (3)
  • Marked with Die Index and Color Coded (2)
  • Meets Cec and Nec Code Changes For Non-Residential Fluorescent Luminaires With Ballasts;Perfect For Oem or Retrofit Lighting Applications;Patented Push-In Technology Quickly Locks Wires In Place;Passes UL 2459 & CSA 182.3 Finger Probe Requirements;Fits Through 1/2 In. Knockout;Pieces Pull Apart Safely and Easily;3/8 In. Strip Length Indicator;Thumb Ridges Provide Superior Grip;Model:102 (2)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations (19)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • Non-Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Non-Insulated Ring Terminal 6 AWG - 50 Pack (3)
  • Non-Insulated Ring Terminal 8 AWG - 50 Pack (2)
  • Nylon Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • Provides an Excellent Thermal Dissipation of Splice Heat (3)
  • provides excellent thermal dissipation of splice heat (2)
  • PVC Insulation Eliminates Insulation Failures and Reduces Outage Costs;Removable Port and Screw Plugs (2)
  • Quick, reliable method of connection to terminal blocks and boards without the use of tools. Unique construction of the female disconnect offers long-term dependability (2)
  • Recommended screw driver: 4 mm (2)
  • Recommended screw driver: 5.5 mm (2)
  • Rigid (2)
  • Scratch-Resistant;Solvent-Resistant (2)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Specifically Created For The Residential Markets;The T/R+ Replaces The Yellow;Tan and Red Connectors In The Majority Of Field Applications (2)
  • Splices Large Conductors Required for Commercial Service;Use as Low Cost Reducing Sleeve;All Sizes can be Installed with Popular Mechanical and Hydraulic Tools;Center Stop Assures Proper Conductor Positioning;Quick Identifications With Color-Coded Foil Caps (3)
  • Split-Bolt Has Free-Running Threads and Easy to Grip Wrench Flats;Highly Resistant to Season Cracking and Corrosion;High Strength (3)
  • Standard Barrel;High Conductivity (20)
  • Static Load Capacity 100 Lb (3)
  • Static Load Capacity 100 Lb (Vertical), 25 Lb (Horizontal), Clearance Hole For 1/4 In Bolt (2)
  • Static Load Capacity 160 Lb (2)
  • Static Load Capacity 25 Lb (4)
  • Suitable to Mark Electrical Wires and Terminal Strips Quickly (4)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (9)
  • These fork terminals have extra-long PVC insulation sleeve for protection and stress relief at wires flex point. Brazed seam barrel is serrated for high pull-out value. Insulation is color-coded (7)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire) (2)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (15)
  • These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wires flex point. Brazed seam barrel is serrated to obtain high pull-out value (13)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (6)
  • Three sizes accommodate #18-14AWG stranded Copper (2)
  • Tin Plated to Inhibit Corrosion, Color Coded Barrel, Inspection Window, Beveled Wire Entry (3)
  • Tin-Plated to Inhibit Corrosion (12)
  • Tin-Plated to Inhibit Corrosion;Compact Design (4)
  • Top entry wire connection (2)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (11)
  • UL Listed 90 DEG C, 600 V - 35 KV,Tongue Angle: Straight (7)
  • Unique construction of the female disconnect offers long-term dependability. Brazed seam serrated barrel provides maximum tensile strength (12)
  • Unique Construction Of The Female Disconnect Offers Long-Term Dependability. Brazed Seam Serrated Barrel Provides Maximum Tensile Strength. (3)
  • Uniquely designed pressure bar and notched v-bottom collar provide vise-like grip between conductor and terminal (3)
  • Universal terminal, These dual-rated panelboard lugs are constructed from high strength extruded aluminum alloy and electro tin-plated to provide low contact resistance (3)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Vertical markings (4)
  • Vinyl Insulated Locking Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Locking Spade Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Ring Terminal 12-10 AWG - 50 Pack (5)
  • Vinyl Insulated Ring Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Ring Terminal 22-18 AWG - 100 Pack (4)
  • Vinyl Insulated Ring Terminal 8 AWG - 250 Pack (2)
  • Vinyl Insulated Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Spade Terminal 16-14 AWG - 100 Pack (2)
  • Vinyl Insulated Spade Terminal 22-18 AWG - 100 Pack (2)
  • Show More...

• Operating Temperature Range

  

  • -40 to +130 °C;-40 to +260 °F (5)
  • Maximum of +105 °C;+221 °F (3)
  • Maximum of +90 °C (17)
  • Show More...

• Overall Length

  

  • 0.205 in (2)
  • 0.244 in (4)
  • 0.571 in;14.5 mm (3)
  • 0.80 in;20.3 mm (2)
  • 0.87 in;22.098 mm (2)
  • 0.899 in (2)
  • 0.97 in (6)
  • 0.986 in (2)
  • 1 in (4)
  • 1 in;25.4 mm (4)
  • 1.03 in (2)
  • 1.06 in (3)
  • 1.09 in (3)
  • 1.12 in (2)
  • 1.13 in (4)
  • 1.153 in (2)
  • 1.16 in (5)
  • 1.31 in (3)
  • 1.47 in (4)
  • 1.47 in;37 mm (2)
  • 1.47 in;37.3 mm (3)
  • 1.5 in (2)
  • 1.50 in (4)
  • 1.516 in;38.5 mm (3)
  • 1.54 in (2)
  • 1.55 in;39.4 mm (2)
  • 1.62 in (2)
  • 1.65 in (3)
  • 1.75 in (3)
  • 1.752 in (2)
  • 1.81 in (2)
  • 1.831 in;46.5 mm (4)
  • 1.84 in (2)
  • 1.88 in (2)
  • 1.913 in (2)
  • 1.93 in (3)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 2 in (8)
  • 2.03 in (3)
  • 2.10 in (2)
  • 2.18 in (2)
  • 2.25 in (4)
  • 2.60 in (2)
  • 2.63 in (2)
  • 2.677 in (2)
  • 2.68 in (2)
  • 2.9 in (4)
  • 2-25/32 in (5)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 3 in (2)
  • 3.18 in (2)
  • 3.25 in (3)
  • 3.5 in (3)
  • 3-3/16 in (2)
  • 4 in (6)
  • 4-3/16 in (2)
  • 48 in (2)
  • 5.5 in (7)
  • 5.83 in (2)
  • 6.38 in (2)
  • 8 in (2)
  • Show More...

• Overall Width

  

  • 0.01 in (2)
  • 0.201 in;5.1 mm (4)
  • 0.311 in;7.9 mm (2)
  • 0.37 in;9.5 mm (2)
  • 1.04 in (4)
  • 1.33 in (5)
  • 1.71 in (4)
  • 2.9 in (7)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Butt Splice (3)
  • Compression (38)
  • Compression Lug (3)
  • Compression;Crimp (22)
  • Crimp (6)
  • Disconnect Terminal (7)
  • Feed-Through Terminal (6)
  • Female Disconnecter (3)
  • Fork Terminal (18)
  • Ring Terminal (9)
  • Ring Tongue (7)
  • Screw (67)
  • Splice Connector (4)
  • Split (27)
  • Spring (2)
  • Tension (2)
  • Tongue (38)
  • TUBULAR WIRE CLAMP WITH SCREW (1)
  • Twist-On (4)
  • Wire Terminal Disconnect (2)
  • Show More...

• Overall Height

  

  • 0.570 in (2)
  • 0.81 in (5)
  • 1.85 in (2)
  • 2.205 in;56 mm (2)
  • 2.34 in (4)
  • 2.362 in;60 mm (3)
  • 2.5 in (2)
  • 2.62 in (4)
  • 3.13 in;79.5 mm (3)
  • 3.25 in (7)
  • Show More...

• For Use With

  

  • 1-Ballast Fixture New Installations and Retrofits (2)
  • 35 mm Rail (3)
  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • All Aluminum Applications (2)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (11)
  • Aluminum/Copper Code Conductor (3)
  • Basic Uninsulated Splices for Service Entrances;For Combinations of Aluminum-to-Aluminum;Aluminum-to-Copper Conductors (5)
  • Brick;Concrete (2)
  • Bricks (2)
  • Concrete;Block;Brick;Stone;Light Duty Work (3)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper and Aluminum Conductor (19)
  • Copper Cables;Aluminum Cables (6)
  • Copper Code Conductors (8)
  • Copper Conductor (44)
  • Copper or Aluminum Conductors (2)
  • Copper Wire (3)
  • Direct Burial Applications in Earth or Concrete (2)
  • Fasteners;Beam Fasteners;Boxes;Fixtures (2)
  • Fasteners;Conduit Fasteners (7)
  • Flexible, Extra-Flexible, and Code Stranded Copper Conductors (3)
  • Flexible;Extra-Flexible;Code Stranded Copper Conductors (5)
  • For Combinations of Aluminum-to-Aluminum Conductors;Aluminum-to-Copper Conductors (3)
  • Greater than 2000 Volts Consult Cable (3)
  • Grounding and Bonding;Direct Burial in Earth or Concrete (8)
  • Hydraulic Tool (9)
  • Overhead Tension Connection (2)
  • Poured Concrete;Prestressed Concrete;Cinder Block;Brick;Mortar (3)
  • Soft Concrete (4)
  • Splicing Two Copper or Aluminum Wire (2)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection (3)
  • Splicing;Tapping;Terminating Conductors Power and Grounding Electrical Connection;Copper to Copper Connections (10)
  • Standard Conductors (5)
  • Stranded Aluminum or Copper Code Conductors (6)
  • Stranded Copper Conductors (24)
  • Temporary Connections to Male Disconnects and Terminal Blocks. (2)
  • Terminate;Splice (2)
  • Terminate;Splice;Tap Power Connectors (18)
  • Wire Termination (21)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (15)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Show More...

• Maximum Voltage Rating

  

  • 2000 V (3)
  • 35 kV (92)
  • 400 V (2)
  • 550/600/800 V (2)
  • 600 V (106)
  • 600 V ac (38)
  • 600 V;1000 V (Lighting Fixture/Luminaries/Sign) (5)
  • 600/700/800 V (7)
  • 800 V (6)
  • Show More...

• Package Quantity

  

  • 1 (2)
  • 1 BG;5 CT (4)
  • 1 ct (29)
  • 1 CT;10 PK (7)
  • 1 CT;100 PK (5)
  • 1 CT;12 PK (3)
  • 1 CT;25 PK (5)
  • 1 CT;3 PK (3)
  • 1 CT;30 PK (3)
  • 1 CT;5 PK (11)
  • 1 CT;50 Pk (4)
  • 1 CT;6 Pk (4)
  • 1 CT;60 Pk (2)
  • 1 PK (7)
  • 1 PK;100 CT (2)
  • 10 CT (3)
  • 10 CT;100 PK (19)
  • 10 CT;50 PK (4)
  • 10 PK (21)
  • 100 BX (16)
  • 100 CT (33)
  • 100 CT;1000 PK (3)
  • 100 CT;400 PK (4)
  • 100 CT;500 PK (7)
  • 100 CT;600 PK (5)
  • 100 CT;800 PK (5)
  • 100 PC (7)
  • 100 PK (14)
  • 100 PK;500 CT (4)
  • 100 PK;600 CT (6)
  • 1000 CT;10000 PK (11)
  • 1000 CT;5000 PK (3)
  • 12 CT (10)
  • 12 CT;120 PK (6)
  • 12 PK (3)
  • 15 PK (10)
  • 2 CT (4)
  • 20 PC (2)
  • 20 PK (4)
  • 200 CT (2)
  • 200 CT;2000 PK (2)
  • 24 CT (3)
  • 240 CT (2)
  • 25 BG (14)
  • 25 CT (9)
  • 25 CT;100 PK (2)
  • 25 CT;250 PK (20)
  • 25 PK (13)
  • 3 CT (16)
  • 3 CT;30 PK (2)
  • 300 CT;250 PK (2)
  • 4 CT (8)
  • 5 CT;50 PK (2)
  • 50 CT (25)
  • 50 CT;250 PK (2)
  • 50 CT;500 PK (17)
  • 50 PC (3)
  • 50 PK (23)
  • 50 PK;300 CT (6)
  • 50 PK;500 CT (2)
  • 500 BX (3)
  • 500 CT (2)
  • 500 CT;5000 PK (11)
  • 500 JR (2)
  • 500 Jug (2)
  • 6 CT (22)
  • 6 CT;60 PK (5)
  • 6 PK (5)
  • Show More...

• Weight

  

  • 0.0003 lb (2)
  • 0.003 lb (7)
  • 0.004 lb (3)
  • 0.006 lb (6)
  • 0.01 lb (35)
  • 0.01 lb/EA (9)
  • 0.02 lb (16)
  • 0.02 lb/EA (22)
  • 0.03 lb (18)
  • 0.03 lb/EA (15)
  • 0.04 lb (3)
  • 0.04 lb/EA (11)
  • 0.05 lb (5)
  • 0.05 lb/EA (10)
  • 0.06 lb (4)
  • 0.06 lb/EA (14)
  • 0.07 lb (6)
  • 0.07 lb/EA (5)
  • 0.08 lb (4)
  • 0.08 lb/EA (14)
  • 0.09 lb (4)
  • 0.09 lb/EA (7)
  • 0.1 lb (2)
  • 0.1 lb/EA (4)
  • 0.11 lb (6)
  • 0.12 lb (2)
  • 0.12 lb/EA (5)
  • 0.13 lb (3)
  • 0.13 lb/EA (15)
  • 0.14 lb/EA (3)
  • 0.15 lb (3)
  • 0.15 lb/EA (3)
  • 0.16 lb (2)
  • 0.16 lb/EA (3)
  • 0.17 lb/EA (5)
  • 0.18 lb (2)
  • 0.19 lb/EA (8)
  • 0.2 lb (4)
  • 0.22 lb (2)
  • 0.22 lb/EA (2)
  • 0.25 lb (2)
  • 0.25 lb/EA (3)
  • 0.26 lb (2)
  • 0.26 lb/EA (3)
  • 0.28 lb/EA (4)
  • 0.34 lb (2)
  • 0.35 lb/EA (3)
  • 0.37 lb (3)
  • 0.37 lb/EA (2)
  • 0.38 lb/EA (2)
  • 0.41 lb/EA (2)
  • 0.45 lb/EA (3)
  • 0.53 lb/EA (2)
  • 0.55 lb/EA (2)
  • 0.59 lb/EA (2)
  • 0.62 lb (2)
  • 0.62 lb/EA (2)
  • 0.7 lb/EA (2)
  • 0.72 lb (2)
  • 0.79 lb/EA (2)
  • 1 lb (5)
  • 1 lb/EA (25)
  • 10 lb (3)
  • 2 lb/EA (2)
  • Show More...

• Application

  

  • Appliances;Fixtures;Automotive;Marine;Commercial Construction;Industrial Construction;Irrigation;Residential Construction (2)
  • Applications certified to 600 V and recommended up to 35 kV¥ (11)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (5)
  • Brick, Concrete (2)
  • Brick, Concrete, Mortar, Wood (3)
  • Bricks (5)
  • Cable and Wire Marking, General and Industrial Identification, Laboratory Identification, Panel Labeling, Voice and Data Identification (3)
  • Cable Tie Entry from All Four Sides, Used with Miniature, and Intermediate Cables Ties;Indoor (2)
  • Clear Insulated Multiple Tap Connectors (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (24)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (23)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (4)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (4)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (16)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (8)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (8)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Component and Equipment Labeling;Electrical Labeling;Facility Identification;Floor Marking;Lean and 5S Labeling;Pipe and Valve Marking;Warehouse Marking (2)
  • Concrete, Block, Brick, Stone (4)
  • Concrete, Block, Brick, Stone, Light Duty Work (5)
  • Concrete, Pipe Hanging, Conduit, Eye Rod, Cable Trays, Lighting Systems, Strut Channels, Overhead Utilities, Sprinkler Systems, Drop Ceilings, HVAC Duct, Electrical, Refrigeration (6)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Drop Ceiling (2)
  • Drywall, Concrete, Brick, Block (3)
  • Drywall, Particle Board, Wood (4)
  • Drywall, Wood, Aluminum (4)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (46)
  • Electrical (19)
  • For Aluminum And Copper Conductors (19)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (9)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (3)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (6)
  • For Direct Burial Applications In Earth Or Concrete, Copper (4)
  • For Direct Burial Cables (8)
  • For Direct Burial In Earth And Concrete (12)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (7)
  • For Dry Locations;Insulating and protecting wires and cables (15)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (2)
  • For high temperature applications over 105 degree C (2)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (4)
  • For Indoor Use Only (2)
  • For Indoor Use Only, Copper Or Stranded Aluminum (3)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (3)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Making Tap Or Parallel Copper Connections (3)
  • For quickly connecting or disconnecting a terminal (3)
  • For Range Of Copper And Making Tap Or Parallel Copper Connections (2)
  • For Removing Metal And Can Be Used In Heavier Gauge Metals (6)
  • For Standard Conductor Splice (5)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (13)
  • For Use With Copper And Aluminum Conductors (5)
  • For use with SNA terminal blocks (5)
  • For use with SNK screw clamp terminal blocks (2)
  • For use with SNK terminal blocks (5)
  • For Used To Couple Threaded Rod For Extended Lengths (3)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • Framing, Electrical, Plumbing and Sheet Metal Applications (4)
  • General Purpose (16)
  • Grounding Application (3)
  • High Voltage (2)
  • Ind Facilities & Factories - Facility - Other (3)
  • Indoor (16)
  • Indoor;Outdoor (8)
  • Indoor;Used with Miniature, Intermediate, and Standard Cables Ties (4)
  • Industrial (3)
  • Industrial;Labeling Wire;Cable and Rounded Surface (2)
  • Industrials, Hospitals, Utilities, Marine, Computer (6)
  • Labeling Wire, Cable and Rounded Surface (2)
  • Light Fixtures (2)
  • Marking Wire and Cable (4)
  • Non-Indicating (2)
  • NSI (23)
  • OSB;Cinder Block;Concrete (4)
  • Other (38)
  • Outdoor (11)
  • Overhead Tension Connection (2)
  • Poured Concrete, Prestressed Concrete, Cinder Block, Brick, Mortar (7)
  • Primary Electrical Insulation for Splicing all Solid Dielectric Cables Through 69 kV. (3)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (5)
  • Provides terminating point for a group of wires running in one direction (4)
  • Soft Concrete (4)
  • Splicing Wire (7)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (27)
  • Stranded Aluminum or Copper Code Conductor (6)
  • Tap connections and in-line splice/reductions are made quickly and easily with the UNITAP™ line of connectors (2)
  • Terminate "upsized" conductor and/or fine strand conductor into mechanical connectors found in molded case circuit breakers, panel board equipment, and other switchgear. (2)
  • Terminate, Splice, Tap Power Connectors (168)
  • Terminate-Splice-Tap (3)
  • To be used for marking SNA terminal blocks (8)
  • Used for Coaxial Cable, Bell Wire, Thermostat Wire, Telephone Wire and Romex(R) (4)
  • Used to position the grounding plate on a threaded rod prior to placement of the concrete. (2)
  • Used to Strap or Support Pipe, Ducts & Other Fastening Applications (2)
  • Utility/Ground Grid (6)
  • Wire Splice (28)
  • Wire Termination (349)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (87)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (22)
  • BOX SUPPORT (7)
  • CABLE & PIPE TRANSITS (25)
  • Comp & Mech Lugs and Butt Splices (480)
  • Datacom Wiring Devices and Accessories (6)
  • DISCONNECTS (3)
  • FASTENERS (41)
  • FUSE BLOCKS,FUSE HOLDERS (4)
  • Fuses & Fuse Accessories (17)
  • HAND TOOLS (11)
  • HEAT/COLD SHRINK (106)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (4)
  • MISC FITTINGS (2)
  • Powerdefense Breakers (13)
  • Printers and Labeling (12)
  • SAFETY PRODUCTS (3)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (81)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (30)
  • SPLICE KITS (18)
  • SPLIT BOLTS (163)
  • T&B C TAP LUGS (32)
  • TAPE (33)
  • TERMINAL BLOCK ACESSORIES (59)
  • TERMINAL BLOCKS POWER DIST BLOCKS (135)
  • TERMINALS (473)
  • TRANSFORMER ACCESSORIES (1)
  • WIRE LUBE, MARKERS, & TIES (29)
  • WIRE NUTS (10)
  • Show More...

• Number Of Pad Holes

  

  • 1 (70)
  • 2 (42)
  • Show More...

• Poles

  

  • 1 (190)
  • 2 (1)
  • 3 in (2)
  • Three-pole (3)
  • Show More...

• Color

  

  • Aluminum (23)
  • Black (151)
  • Black on White (5)
  • Blue (148)
  • Brown (45)
  • Chromated steel (2)
  • Clear (16)
  • Colorless (4)
  • Copper (25)
  • Dark Gray (5)
  • Gray (57)
  • Gray 0 (16)
  • Green (20)
  • GREEN/YELLOW (14)
  • Grey (6)
  • Grey / Dark grey (2)
  • Matte Black Finish (2)
  • Metallic (47)
  • OLIVE (3)
  • Orange (15)
  • Orange Alert (3)
  • Pink (19)
  • Purple (17)
  • Red (125)
  • RUBY (2)
  • Silver (9)
  • Tan (5)
  • Tin Plated Copper (13)
  • White (43)
  • WHITE GLOSS (2)
  • Yellow (135)
  • Show More...

• Housing Material

  

  • Aluminum (84)
  • Aluminum Alloy-Tin Plated (4)
  • Copper (24)
  • PHENOLIC (4)
  • Tin Plated Copper (7)
  • Show More...

• Minimum Qty

  

  • 100 (120)
  • 1000 (25)
  • 15 (6)
  • 2 (2)
  • 20 (6)
  • 200 (9)
  • 25 (16)
  • 250 (1)
  • 40 (3)
  • 50 (93)
  • 500 (32)
  • 75 (4)
  • 750 (1)
  • Show More...

• Finish

  

  • Acrylic (3)
  • Aluminum (21)
  • Bare (2)
  • Black Oxide (4)
  • blank (5)
  • Ceramic Coated (3)
  • Ceramic Coated Blue (4)
  • COPPER (30)
  • Electro -Tin Plated (7)
  • EPDM Rubber Insulated (8)
  • Galvanic/Electrolytic Zinc Plated (2)
  • Galvanized (7)
  • Gloss (3)
  • Graphite Metallic (5)
  • Green (2)
  • Nickel Plated (5)
  • NYLON (2)
  • Plastisol (2)
  • Plastisol Insulated (81)
  • Polypropylene (2)
  • STAINLESS STEEL (1)
  • Thermoplastic (2)
  • Tin Plated (176)
  • Tin Plated Bronze (18)
  • Tin Plated Copper (10)
  • Tinned (181)
  • Tin-Plated (49)
  • Uncoated (3)
  • YELLOW (1)
  • Yellow Zinc (3)
  • Zinc Phosphate (40)
  • Zinc Plated (72)
  • Show More...

• Wire Type

  

  • Al/Cu (4)
  • ALUMINUM/COPPER (1)
  • B,C,D,K,M,I (12)
  • Class A & B (36)
  • Class B & C (83)
  • CU Wire Only (3)
  • STRANDED (1)
  • Show More...

• Stud Size

  

  • #10 (4)
  • 1/2 (47)
  • 1/2 in (13)
  • 1/4 (32)
  • 1/4 in (8)
  • 3/8 (44)
  • 3/8 in (9)
  • 5/16 (11)
  • 5/8 (2)
  • Show More...

• Temperature Rating

  

  • 105 C (7)
  • 105 DEG C (1)
  • 135 °C (2)
  • 150 DEG C (4)
  • 194 (25)
  • 194° F (6)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (108)
  • 257 Deg F (5)
  • 302 Degrees Fahrenheit (150 Degrees Celsius) (19)
  • -40 To 180 (4)
  • 75 C (4)
  • 90 (4)
  • 90 °C (3)
  • 90 C (86)
  • 90 DEG C (1)
  • 900 DEG F (1)
  • Show More...

• Color Code

  

  • BLACK (18)
  • BLUE (18)
  • BROWN (21)
  • GRAY (12)
  • GREEN (11)
  • ORANGE (7)
  • PINK (13)
  • PURPLE (11)
  • RED (21)
  • TAN (2)
  • WHITE (10)
  • YELLOW (9)
  • Show More...

• Mounting

  

  • # 10 Mounting Hole (2)
  • 1 (2)
  • 1/2 Mounting Hole (17)
  • 1/2 Mounting Holes (25)
  • 1/4 (3)
  • 1/4 Mounting Hole (9)
  • 1/4 Mounting Holes (7)
  • 1-1/16 (2)
  • 1-1/4 (7)
  • 1-1/8 (10)
  • 15/16 (4)
  • 15/32 (4)
  • 17/32 (2)
  • 1-9/16 (2)
  • 2 Mounting Holes (18)
  • 3/4 (2)
  • 3/8 (13)
  • 3/8 Mounting Hole (20)
  • 3/8 Mounting Holes (5)
  • 5/16 (60)
  • 5/16 Mounting Hole (7)
  • 5/8 (8)
  • 5/8 Mounting Hole (2)
  • 7/16 (8)
  • 7/32 (14)
  • 7/8 (4)
  • 9/16 (2)
  • 9/32 (35)
  • Adhesive Tape (8)
  • Beam (3)
  • Bottom Mount (2)
  • CHANNEL (7)
  • DIN 1-3 (2)
  • DIN 3 (2)
  • DIN RAIL (1)
  • None (22)
  • One screw (2)
  • Side Mount (2)
  • Snap In Mount (2)
  • SURFACE (1)
  • Wooden Stud (5)
  • Show More...

• Wire Size

  

  • #18 AWG (2)
  • #24-16 AWG (2)
  • #24-8 AWG (3)
  • #26-10 AWG (11)
  • (2) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (2)
  • (3) #26-12 AWG (6)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (9)
  • 10 (48)
  • 10 AWG (1)
  • 12 (4)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (2)
  • 12 AWG (2)
  • 12-10 AWG (61)
  • 12-14 AWG (2)
  • 14 (40)
  • 14 AWG (1)
  • 16 (6)
  • 16 AWG (2)
  • 16-14 AWG (29)
  • 18 (13)
  • 18 TO 6 AWG (CE), 18 TO 4 AWG (COPPER) (1)
  • 18-14 AWG (25)
  • 1mm2 (3)
  • 2 AWG (2)
  • 2 SOL - 2/0 STR (2)
  • 2/0-14 AWG (5)
  • 22 - 10 (6)
  • 22 - 18 (2)
  • 22 TO 16 AWG (1)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 22-14 AWG (2)
  • 22-16 AWG (22)
  • 22-18 AWG (13)
  • 24 (2)
  • 250 MCM-6 AWG (14)
  • 3/0-6 AWG (12)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 350 TO 500 KCMIL (MAIN), 4 TO 4/0 AWG (TAP) (1)
  • 4 AWG (3)
  • 4 SOL - 1/0 STR (2)
  • 4-14 AWG (8)
  • 500 MCM-4 AWG (11)
  • 6 (5)
  • 6 AWG (10)
  • 6 SOL - 1/0 STR (2)
  • 600 MCM-6 AWG (5)
  • 750-250 MCM (7)
  • 8 (10)
  • 8 AWG (12)
  • Show More...

• Type

  

  • 2-Wire Standard Version (2)
  • ADHESIVE (4)
  • Aluminum Double Lug (5)
  • Aluminum Lay-In Lug (4)
  • Aluminum Pin Adapters (2)
  • Aluminum Single Lug (3)
  • Aluminum Splice (4)
  • Aluminum Split Bolts (4)
  • AMS, Dual Rated (5)
  • Anchor Kit (7)
  • Anchor Setting Tool (6)
  • Automatic Tension Splice (2)
  • Beam fasteners (4)
  • BIBD, Multi-Port (2)
  • Bi-Metallic Pin (3)
  • BISR, In-Line (2)
  • BIT (2)
  • BIT, UNITAP (2)
  • Bolt termination and kit (2)
  • Bolted Lugs & Terminals (29)
  • Bottom Mount Rod Hanger (2)
  • Bottom Mount Wood Drilling Rod Hanger (2)
  • Bracket fastener (2)
  • Bugle Head Drywall Screw (4)
  • Bugle Head Wood Rocket Drywall Screw (4)
  • BUTT (1)
  • Butt Splice (15)
  • Butted (3)
  • Cable conduit to wire fastener (2)
  • Cable Connector (2)
  • Cable Tie Mount (8)
  • Compression Lug (33)
  • Compression Splice Service Entrance (13)
  • Compression Tap (9)
  • Concrete Bottom Mount Rod Hanger (2)
  • Conduit and Box Support Fastener (5)
  • Conduit and cable support (2)
  • Conduit cable fastener and support (2)
  • Conduit fastener (3)
  • Conduit Locknut (4)
  • Conduit to beam fastener (13)
  • Conduit to conduit fastener (3)
  • Conduit to rod fastener (2)
  • Conduit to stud fastener (3)
  • Copper C Taps (3)
  • Copper Connectors (6)
  • Copper Split Bolts (13)
  • Covered Single Wire Ferrule (16)
  • Covers (3)
  • C-Tap (3)
  • C-Taps (5)
  • DIN RAIL (1)
  • Direct Burial Splice Kit With Heat Shrink (3)
  • Disconnect (26)
  • Disconnect Connectors (3)
  • Double Primary (6)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Drop in Anchor (5)
  • Dual Wall (Adhesive Lined) (3)
  • Dual-Rated (5)
  • Dual-Rated Mechanical Connector (24)
  • END SECTION (1)
  • FENDER WASHER (1)
  • Finished Hex Nut (11)
  • Fixture Hanger (2)
  • Flexible Polyolefin Adhesive-Lined (2)
  • Fork Terminal (24)
  • Full Thread Wedge Anchor (14)
  • Gel Tap Splice Kits With Connector (2)
  • Grade 5 Hex Nut (2)
  • Ground Machine Screw (2)
  • Hanger (2)
  • HEAT (5)
  • Heat-Shrink (16)
  • Heavy Wall (16)
  • Hex Head Concrete Anchor System (6)
  • Hex Head Lag Screw (3)
  • Hex Head Tap Bolt (5)
  • Hexagonal Nut Sleeve Anchor (4)
  • H-Type Compression Tap Connector (10)
  • IN LINE (2)
  • IN-Line Splicer/Reducer (8)
  • INSULATED (2)
  • Insulating and Splicing (2)
  • Insulation Displacement (3)
  • K-Lath Screw (4)
  • KS, Compact (4)
  • Label (2)
  • linerless Ethylene Propylene Rubber (5)
  • LOCKING (4)
  • Locking Fork Terminal (14)
  • Long Barrel (14)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (28)
  • Long Barrel - One Hole With Peep Hole (2)
  • Long Barrel - Two Hole (21)
  • Long Barrel, Skive, Tin Plated (3)
  • Long Barrel, Tin Plated (44)
  • MACHINE SCREW (7)
  • Machine Screw Anchor (2)
  • Machine Screw Kit (2)
  • Mechanical Lug (6)
  • Mechanical Splicer/Reducer (3)
  • Mechanical Split Bolt Connector (10)
  • Molded case circuit breaker accessory (18)
  • Multi Cable (13)
  • NAIL PLATE (2)
  • Non-Covered Ferrule (4)
  • Non-Insulated Fork Terminal (2)
  • Non-Insulated Ring Terminal (25)
  • Non-Metallic Cable Splices And Taps (2)
  • Nylon Fully Insulated Female Disconnect (8)
  • Nylon Fully Insulated Male Disconnect (5)
  • Nylon Insulated Female Disconnect (6)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (2)
  • Nylon Insulated Open Top 90 Degree Flag Female Disconnect (2)
  • Nylon Insulated Ring Terminal (13)
  • Nylon Insulated Spade Terminal (2)
  • Nylon Insulated Wire Joint (4)
  • Offset Entry (3)
  • Offset Pin (10)
  • ONE PIECE, DEAD FRONT (1)
  • Pan Head Self Drilling Screw (2)
  • Panelboard Lug (5)
  • Permanent Acrylic Adhesive (3)
  • PIGTAIL (2)
  • Pipe Wrap (2)
  • Plumbers Tape (2)
  • Polypropylene Insulated Ferrule (9)
  • Premise Muletape (2)
  • Pre-printed Books (5)
  • Printer Ribbon (4)
  • Pull Line Measuring Tape (5)
  • Purlin hanger (3)
  • QT-III (25)
  • Rejacketing Sleeve (5)
  • Replacement Sleeves (3)
  • RING (10)
  • Ring Terminal (62)
  • Ring Tongue (10)
  • Rod and wire fastener (7)
  • Rod Coupling (6)
  • ROOF FLASHING (3)
  • Self-Extinguishing, Heat Shrink (2)
  • Service Post Connectors (9)
  • Servie Entrance Sleeves (2)
  • Sheet Metal Screw (3)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (25)
  • Short Barrel - Two Hole (8)
  • Side Mount Rod Hanger (2)
  • Single (Thin) Wall (17)
  • Single Primary (5)
  • Single Sided Entry (22)
  • SLEEVE (1)
  • Solid Pin (11)
  • SPLICE (9)
  • Splice Connector (2)
  • Splicer/Reducer (7)
  • Splicing (2)
  • Split-Bolt (27)
  • Stable (5)
  • STANDARD (5)
  • Standard Barrel (18)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Barrel, Tin Plated (52)
  • Straight Ceiling Wire (4)
  • Submersible Pedestal Connectors (9)
  • TAB STYLE (1)
  • Tag (2)
  • Taps (21)
  • T-bar fastener and spacers (4)
  • Terminal Block (73)
  • Terminal Block Accessories (10)
  • Terminal block accessory (13)
  • Terminal block relay (5)
  • Terminal blocks (38)
  • Terminals (7)
  • Thin-Wall Flexible Polyolefin (5)
  • Tin Plated Copper Split Bolt (10)
  • TP-F (5)
  • Transformer Lug Kit (2)
  • Vinyl Insulated Butt Splice (10)
  • Vinyl Insulated Female Disconnect (12)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (23)
  • Vinyl Insulated Locking Spade Terminal (7)
  • Vinyl Insulated Male Disconnect (8)
  • Vinyl Insulated Ring Terminal (52)
  • Vinyl Insulated Spade Terminal (8)
  • Wafer Head Self Drilling Screw (2)
  • Wall Board Kit (7)
  • Washer Head Self Drilling Screw (2)
  • Wide Range Tap Connectors (5)
  • WIRE (1)
  • Wire Connectors & Termination (2)
  • Y style toggle hook termination and kit (3)
  • YA-A (5)
  • YA-A, Dual Rated (2)
  • YA-E (2)
  • YAEV, Heavy Duty (4)
  • YAEV-L, Heavy Duty (2)
  • YC-C Series (5)
  • YGF (2)
  • YS, Long Barrel (18)
  • YS-L, Standard Barrel (10)
  • Zamac Anchor (9)
  • Show More...

• Die Index

  

  • 10 (12)
  • 1011 (5)
  • 11 (7)
  • 12 (11)
  • 13 (11)
  • 14 (8)
  • 15 (12)
  • 16 (5)
  • 17 (4)
  • 18 (7)
  • 19 (4)
  • 20 (9)
  • 22 (5)
  • 24 (6)
  • 296 (2)
  • 298 (2)
  • 299 (2)
  • 40 (2)
  • 435 (2)
  • 45 (1)
  • 49 (9)
  • 7 (11)
  • 8 (12)
  • 9 (3)
  • 997 (9)
  • 998 (3)
  • BG OR 5/8 (1)
  • C (3)
  • O (2)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (6)
  • # 2 AWG (STR) (10)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (8)
  • # 6 AWG (STR) (8)
  • # 8 AWG (STR) (7)
  • #12 to #6 AWG (2)
  • #2 to 4/0 AWG (2)
  • #8 to 1/0 AWG (2)
  • (2) 14 To (3) 10 AWG (3)
  • 1/0 AWG (2)
  • 1/0 AWG (STR) (7)
  • 12 - 10 (2)
  • 14 to 2, 12 to 2 (3)
  • 14 to 3, 12 to 3, 10 to 3 (2)
  • 2 AWG (4)
  • 2/0 AWG (5)
  • 2/0 AWG (STR) (6)
  • 250 MCM (STR) (6)
  • 3/0 AWG (3)
  • 3/0 AWG (STR) (8)
  • 300 MCM (STR) (2)
  • 350 kcmil (2)
  • 350 MCM (STR) (5)
  • 4 AWG (3)
  • 4/0 AWG (2)
  • 4/0 AWG (STR) (8)
  • 400 MCM (STR) (3)
  • 500 kcmil (2)
  • 500 MCM (STR) (7)
  • 6 AWG (3)
  • 600 MCM (STR) (2)
  • 750 MCM (STR) (2)
  • 8 AWG (3)
  • NA (8)
  • Show More...

• Length

  

  • 0.25 (2)
  • 0.5 in (2)
  • 0.8 (3)
  • 1 (11)
  • 1 in (6)
  • 1.37 in (4)
  • 1.38;34.9 mm (2)
  • 1.5 m (3)
  • 1.5 Meter (2)
  • 1.85 (17)
  • 1/2 in (5)
  • 10 (2)
  • 100 (3)
  • 1-1/2 (6)
  • 1-1/4 (8)
  • 1-1/4 in (3)
  • 1-1/8 (2)
  • 11-1/2 Foot (2)
  • 11-1/2 ft (2)
  • 120 (2)
  • 1-3/4 (3)
  • 1-5/8 (2)
  • 1500 ft (2)
  • 16 Foot (3)
  • 2 (20)
  • 2 in (17)
  • 2.37 (2)
  • 2.75 (2)
  • 200 (4)
  • 2-1/2 (2)
  • 2-1/4 (3)
  • 2-3/4 (4)
  • 3 in (3)
  • 3.25 (2)
  • 3/4 (2)
  • 3/4 in (2)
  • 3/8 (2)
  • 3/8 in (3)
  • 30 (2)
  • 30 ft;9.1 m (5)
  • 3000 ft (2)
  • 3-1/4 (3)
  • 3-3/4 (2)
  • 4 ft;1.2 m (2)
  • 400 (2)
  • 48 in;121.9 mm (5)
  • 5 (2)
  • 6 (2)
  • 6 INCH (1)
  • 7 Foot (2)
  • 7.5 in (2)
  • 7/8 (4)
  • 8 (5)
  • 8 in (2)
  • 9 in;22.9 mm (2)
  • Show More...

• Size

  

  • #10 (28)
  • #10 X 1 IN (7)
  • #10 x 2 IN (3)
  • #12 x 2 IN (2)
  • #2 AWG Code (5)
  • #4 — #3 AWG Code STR, #2 AWG Code SOL (3)
  • #6 (22)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (4)
  • #6 AWG Code (6)
  • #6 x 1 IN (2)
  • #6 X 2 IN (4)
  • #6-32 x 2 IN (4)
  • #8 (17)
  • #8 AWG Code (2)
  • #8 X 1/2 IN (3)
  • #8 x 1-1/4 IN (6)
  • #8 x 2-1/2 IN (2)
  • #8-32 x 2 IN (2)
  • 1 In (EMT), 3/4 In (IMC/Rigid) (2)
  • 1/2 (5)
  • 1/2 in (6)
  • 1/2 In (EMT) (2)
  • 1/2 In, 3/4 In (2)
  • 1/2 In, 3/4 In Conduit (5)
  • 1/2 x 2 (3)
  • 1/2" (4)
  • 1/2-13 x 2 (2)
  • 1/4 (6)
  • 1/4 x 1 (3)
  • 1/4 X 1-1/2 (3)
  • 1/4 X 1-1/2 IN Marker (6)
  • 1/4 x 1-1/4 (4)
  • 1/4 x 1-3/4 (2)
  • 1/4 X 2 (9)
  • 1/4 x 2-1/4 (3)
  • 1/4 x 3-1/4 (3)
  • 1/4 x 7/8 (2)
  • 1/4" (14)
  • 1/4-20 x 1 (3)
  • 1/4-20 x 1-1/2 (2)
  • 12 - 10 (2)
  • 16 - 14 (2)
  • 2 In Conduit (2)
  • 2 IN x 100 FT (2)
  • 2 INCH (5)
  • 2.01 in x 1.12 in x 1.43 in (2)
  • 2.598 INCH L X 1.071 INCH W X 1.929 INCH H (1)
  • 2/0 AWG Code (3)
  • 22 - 18 (3)
  • 2-25/32 inch (5)
  • 3 MM THK (1)
  • 3.47 INCH L X 4 INCH W X 2.61 INCH H (1)
  • 3/16 x 1-1/4 (2)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (6)
  • 3/4 IN x 10 FT (2)
  • 3/8 (9)
  • 3/8 in (3)
  • 3/8 In Conduit (2)
  • 3/8 x 2 (3)
  • 3/8 x 2-3/4 (2)
  • 3/8 x 3 (2)
  • 3/8" (9)
  • 3/8-16 x 1-9/16 (2)
  • 3-1/2 Inch (3)
  • 4 in W x 100 ft L (2)
  • 4.33 in W x 200 ft L (4)
  • 4/0 AWG Code (3)
  • 5 INCH L X 4 INCH W X 2.61 INCH H (1)
  • 5/16 (2)
  • 5/16" (3)
  • 62.5x6x38mm (2)
  • 8.54 INCH L X 5.5 INCH W X 3.12 INCH H (1)
  • 8x59.7x45.6mm (2)
  • Fine Point (2)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (4)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.50 - W=.490 - OD=.340 - ID=.250 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (3)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (2)
  • L=1.83 - W=.670 - OD=.470 - ID=.360 (3)
  • L=1.840 - W=1.870 - H=1.870 (2)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.36 - W=.900 - OD=.620 - ID=.490 (2)
  • L=2.36 - W=1.00 - OD=.690 - ID=.550 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.48 - W=1.09 - OD=.750 - ID=.590 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.90 - H=2.34 - W=1.04 (5)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=5.50 - H=3.25 - W=2.90 (5)
  • Length 1-13/16 inch (2)
  • NA (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Show More...