Narrow By:

• Category: Anchors, Connectors, & Fasteners

• Product Type

  

  • 1/0 Al 2-Hole 1/2 (1)
  • 1/0 Cu 1-Hole Short 5/16 (1)
  • 10.2MM Wide Gray Feed Thru TB 20-6 Awg (1)
  • 12 Circuit Terminal Block (1)
  • 12-10 Awg Vinyl Insulated (1)
  • 12-10 Bare Ring 1/4 Stud (1)
  • 12MM Wide Gray Feed Thru TB 17-4 Awg (1)
  • 14-4 Two Sided Unitap, 3 Port (1)
  • 16-14 Awg Vinyl Insulated (1)
  • 16MM Wide Gray Feed Thru TB 15-0awg (1)
  • 18-14 Nyl Hdty Ring 8-10, .042 In Thick (1)
  • 1X350-6 Line 12X4-14 Load (1)
  • 1X350-6 Line 6X4-14 Load (1)
  • 1X500-6 Line 1X500-6 Load (1)
  • 2 Position Bridge (3)
  • 2/0 Al 2-Hole 1/2 (1)
  • 250-10, 2-Sided, 3-Port, Flex (1)
  • 250-10, 2-Sided, Tap, Flex (1)
  • 2WAY Al Splice Conn 250WIRE Red (1)
  • 3/0 Al 2-Hole 1/2 (1)
  • 350-10 One Sided Unitap (1)
  • 3M™ Highland™ Nylon Fully Insulated Butted Seam Female Disco (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (4)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Ring Tongues (7)
  • 4 Wire TB 1.5 MM2 (1)
  • 4/0 Al 2-Hole 1/2 (1)
  • 400-500 2 Hole Nema (1)
  • 5.2MM Wide 3 Wire TB 26-12awg (1)
  • 5.2MM Wide 4 Wire TB 26-12awg (1)
  • 5.2MM Wide Gray Feed Through TB 26-12awg (1)
  • 5MM Tags Printed 1-10 Vertical (1)
  • 5MM Tags Printed 11-20 Vertical (1)
  • 5X20MM Fuse Idc TB (1)
  • 6.2MM Disconnect TB 26-8awg (1)
  • 6.2MM Spring Clip TB 28-8awg (1)
  • 6.2MM Wide 3 Wire TB 26-8awg (1)
  • 6.2MM Wide 4 Wire TB 26-8awg (1)
  • 6.2MM Wide Blue Feed Through TB 26-10awg (1)
  • 6.2MM Wide White Feed Thru TB 26-8awg (1)
  • 600 Al 2-Hle 1/2, STRP LNG: 2 7/8" NR TNG (1)
  • 600-4 One Side Unitap (1)
  • 8.2MM Ground Block 24-8awg (1)
  • Aluminum Din Rail - 3 FT (1)
  • Aluminum Pin Terminal Al Pin 1/0 Awg (1)
  • Aluminum Pin Terminal Al Pin 2 Awg (1)
  • Aluminum Pin Terminal Al Pin 2/0 Awg (1)
  • Aluminum Pin Terminal Al Pin 250 MCM (1)
  • Aluminum Pin Terminal Al Pin 300 MCM (1)
  • Aluminum Pin Terminal Al Pin 350 MCM (1)
  • Aluminum Pin Terminal Al Pin 4 Awg (1)
  • Aluminum Pin Terminal Al Pin 4/0 Awg (1)
  • Aluminum Pin Terminal Al Pin 500 MCM (1)
  • Aluminum Pin Terminal Al Pin 750 MCM (1)
  • Angled Mounting Support Tall (1)
  • Block Fork (1)
  • BRU80A Distribution Block (1)
  • Butt Splice (1)
  • Butt Splice Connector (2)
  • Compression Lug (1)
  • Conductor Lug (2)
  • Crimp-On Wire Joint (1)
  • Cross Connector (1)
  • C-Type Copper Compression Tap (1)
  • Cu Mec (4) 14-6 14-4 B Ur (1)
  • Cu Mec (6) 14-6 14-4 B Ur (1)
  • Cu Mec (8) 14-6 14-4 B Ur (1)
  • D4/6.P.2L (2)
  • Disconnect Terminal (2)
  • Distribution Block (1)
  • End Bracket (2)
  • End Plate (2)
  • End Section (1)
  • End Stop For 35MM Rail - One Screw Mount (1)
  • ES4-SF End Section (1)
  • Exp Ins Vinyl LKG Fork Term, 18-14 (1)
  • Exp Ins Vinyl LKG FRK Term 12-10 Yl (1)
  • Exp Ins Vinyl Ring Term, 18-14, No6 (1)
  • Exp Ins VNL RNG TRM, 12-10, 3/8 BLT (1)
  • Exp Insul Vnyl RNG Term, 18-14, 1/4 (1)
  • FB Terminal 150A Alum. (Package Of 3) (1)
  • Feed Through Terminal (6)
  • FEM8D2S1 End Section (1)
  • FEM8S End Section (1)
  • Female Disconnect (3)
  • Female Disconnecter Terminal (3)
  • Flex Lug (2)
  • Fork Terminal (13)
  • Fuse Terminal (1)
  • Fuse Terminal Block (1)
  • H-Type Compression Connector (6)
  • Ins Nyl Fem-250 Disc 12-10 Len .8 (1)
  • Ins Nyl Fem-250 Disc 16-14 Len .8 (1)
  • Ins Nyl Fork Term 12-10 NO8 Yello (1)
  • Ins Nyl Fork Term 18-14 BH NO10 Blu (1)
  • Ins Nyl Fork Term 18-14 BHNO6 Blue (1)
  • Ins Nyl Fork Term 22-16 BLT NO6 Red (1)
  • Ins Nyl Fork Term 22-16 BLT NO8 Red (1)
  • Ins Nyl LKG Fork Term 18-14 No10 (1)
  • Ins Nyl Ring Term 12-10 BLT 3/8 Yel (1)
  • Ins Nyl Ring Term 12-10 NO10 Yellow (1)
  • Ins Nyl Ring Term 8 Bolt 5/16IN Red (1)
  • Ins Nyl RNG Term 12-10 Bolt 1/4 Yel (1)
  • Ins Nylon Ring Term 8 BLT 3/8IN Red (1)
  • Ins PP Ferrule 18, .75 MM2, LG .63 (1)
  • Ins Vin LKG Fork TRM 18-14 Bolt No8 (1)
  • Ins Vin LKG FRK TRM 18-14 BLT No10 (1)
  • Ins Vin Ring Term 12-10 5/16IN Yel (1)
  • Ins Vinl Fork Term 12-10 BLT NO8 Ye (1)
  • Ins Vinyl Fork Term 22-16 NO10 Red (1)
  • Ins Vinyl Fork Term 22-16 NO8 Red (1)
  • Ins Vinyl Fork Term NO12-10 1/4 Yel (1)
  • Ins Vinyl LKG Fork Term 12-10 No10 (1)
  • Ins Vinyl LKG Fork Term 12-10 No6 (1)
  • Ins Vinyl LKG Fork Term 12-10 No8 (1)
  • Ins Vinyl LKG Fork Term 18-14 No6 (1)
  • Ins Vinyl LKG Fork Term 22-16 No6 (1)
  • Ins Vinyl LKG FRK TRM 18-14 BLT No8 (1)
  • Ins Vinyl LKG FRK TRM 22-16 BLT No8 (1)
  • Ins Vinyl Ring Term 12-10 1/4IN Yel (1)
  • Ins Vinyl Ring Term 12-10 BLT No10 (1)
  • Ins Vinyl Ring Term 12-10 NO10 Yel (1)
  • Ins Vinyl Ring Term 18-14 1/4IN Blu (1)
  • Ins Vinyl Ring Term 18-14 NO10 Blue (1)
  • Ins Vinyl Ring Term 18-14 NO8 Blue (1)
  • Ins Vinyl Ring Term 22-16 1/4IN Red (1)
  • Ins Vinyl Ring Term 22-16 NO10 Red (1)
  • Ins Vinyl Ring Term 22-16 NO6 Red (1)
  • Ins Vinyl Ring Term 22-16 NO8 Red (1)
  • Insnyl Fork Term 22-16 BLT NO10 Red (1)
  • Insnyl LKG Fork Term 12-10 NO10 Yel (1)
  • Insnyl Ring Term 18-14 BLT NO10 Blu (1)
  • Insnyl Ring Term 22-16 BLT NO10 Red (1)
  • Insulated Aluminum Service Entrance Compression Splice (3)
  • Insulated Terminal Block, 20 Amp, 12 Cir (1)
  • Insvin LKG Fork Term 12-10 Awg No10 (1)
  • Insvin LKG Fork TRM 18-14 Bolt No10 (1)
  • Jumper-Slip-On Over Barrier (1)
  • Large Power Distribution Cover (1)
  • Line and Load Terminal (1)
  • Locking Fork (2)
  • M4/6 Terminal Block (1)
  • M4/6 Terminal Green (1)
  • M4/6.D2.1.N Terminal Blue (1)
  • M4/8 D2SFL 110/220V Ac (2)
  • M6/8.P Ground Terminal (1)
  • Male Disconnect (1)
  • MC512PA 1- 100 Horizontal (1)
  • Medium Power Distribution Cover (1)
  • Mini Terminal Kit (1)
  • Mounting Rail (1)
  • Multi Cableblock 2WAY 350-10 2out (1)
  • Multi-Conductor Terminal Block (2)
  • Non Insul Ring NO8 , 1/4 Mount (2)
  • Non-Ins - BS Ring Term, 4, 1/2, Met (1)
  • Non-Ins - BS Ring Term, 4, 1/4, Met (1)
  • Non-Ins - BS Ring Term, 6, 1/4, Met (1)
  • Non-Ins BS Ring Term 4 1/4 (1)
  • Non-Ins BS Ring Term 6 5/16 (1)
  • Non-Ins BS RNG Term NO6 Awg 1/2 BLT (1)
  • Non-Ins BS RNG Term NO6 Awg 3/8 BLT (1)
  • Nonins BS RNG Term NO6 Awg 3/8 Bolt (1)
  • Nonins BS RNG Term NO8 Awg NO10 BLT (1)
  • Non-Ins Fork Term 18-14 No8 (1)
  • Non-Ins HTM Ring Term, 12-10, NO10, (1)
  • Non-Ins Ring Term 12-10 1/4 Meta (1)
  • Nonins Ring Term, 12-10, NO10, Meta (1)
  • Non-Ins Ring TRM 12-10 Bolt 1/4 (1)
  • Non-Ins RNG TRM Hvydty 16-14 BLT1/4 (1)
  • Non-Ins Tub Ring 2/2AN 5/16 (1)
  • Partition Plate (1)
  • Polaris Ins HD 2 Port 750 (1)
  • Polaris Vision Tap 2 Port 1/0 Os (1)
  • Polaris Vision Tap 2 Port 3/0 Os (1)
  • Polaris Vision Tap 2 Port 4 Os (1)
  • Polaris Vision Tap 3/0 3 Port Dse (1)
  • Power Distribution Block (15)
  • Power Splicer and Stud Block (1)
  • Power Stud Block (1)
  • Power Terminal Block (2)
  • RC1010 Marker (1)
  • RC610 Marker Blank (1)
  • RC610 Marker Horiz - (1)
  • RC610 Marker Horiz GRD (1)
  • RC610 Marker Vert 10 X 21-30 (1)
  • RC610 Marker Vert 10 X 31-40 (1)
  • RC610 Marker Vert 10 X 41-50 (1)
  • RC65 Marker Vert 1-100 (1)
  • RC810 Marker Horz 1-100 (1)
  • Ring Terminal (10)
  • Ring Tongue Compression Terminal (1)
  • Screw Connection Double Level Block (1)
  • Screw Connection Single Level Ground Block (1)
  • Screw Connection Single Level Through-Feed Terminal (1)
  • Screw Connection Single Level-Through-Feed (1)
  • Small Power Distribution Block Cover (1)
  • Spade Terminal (1)
  • Spade Terminal, Selecta, Butted Seam, Funnel BRL, Ru Listed, Conn (1)
  • Splicer Power Block (1)
  • Splicing Connector (2)
  • Standard Barrel Lug (4)
  • Terminal (25)
  • Terminal Block (3)
  • Terminal Block End Section CHL (1)
  • Terminal Kit (1)
  • Terminal Kit 250 PC Assortment Kit (1)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Terminal Strip (5)
  • Terminal Strip 3-Circuit (1)
  • Terminal, Selecta, Butted Seam, Funnel BRL, Ru Listed, Connection (1)
  • Transformer Lug Kit # 1 (1)
  • Transformer Lug Kit # 2 (1)
  • TRM QCK Disc VINL22-18AWG-25PK (1)
  • TRM Vin RNG 12-10 AWG5 16-25PK (1)
  • TS35/F6 Din Rail Punch 1 Meter (1)
  • Two Barrel Lug (2)
  • Two-Way Splice Connector (9)
  • Universal End Stop (1)
  • Vinyl Lock Fork, 16-14, NO6 Stud (1)
  • Vinyl Lock FRK Terminal, 16-14, No1 (1)
  • Vinyl Ring, 12-10, 3/8 Stud (1)
  • Vinyl Ring, 22-16, 1/4 Stud (1)
  • Vinyl Ring, 22-16, NO10 Stud (1)
  • Vinyl RNG Terminal, 12-10, NO10 Stu (1)
  • Vinyl RNG Terminal, 16-14, NO10 Stu (1)
  • Vnyl Ins FRK Term 12-10 NO6 Yellow (1)
  • Vnyl Ins FRK Term 12-10 NO8 Blue (1)
  • Vnyl Ins FRK Term 16-14 NO6 Blue (1)
  • Vnyl Ins FRK Term 22-16 NO6 Red (1)
  • Vnyl Ins FRK Term 22-16 NO8 Red (1)
  • Vnyl Insul RNG Term 12-10 NO10 Yel (1)
  • Vnyl Insul RNG Term 12-10 NO8 Blue (1)
  • Vnyl Insul RNG Term 16-14 NO10 Blu (1)
  • Vnyl Insul RNG Term 16-14 NO8 Blue (1)
  • Vnyl Insul RNG Term 22-16 NO8 Red (1)
  • Wire Splice (1)
  • ZS10 Feed Through TB (1)
  • ZS10-Pe Ground Terminal Block (1)
  • ZS16 Feed Through Terminal Block (1)
  • ZS35-Pe Ground Terminal Block (1)
  • ZS4-Pe Ground Terminal Block (1)
  • ZS4-S Lever Disconnect TB (1)
  • ZS4-SF Fuse Terminal Block (1)
  • ZS4-SF1-R1 Fuse TB W Indicator (1)
  • ZS4-SF1-R3 Fuse TB W Indicator (1)
  • ZS4-SP Disconnect TB With Plug (1)
  • ZS6 Feed Through Terminal Block (1)
  • ZS6-Pe Ground Terminal Block (1)
  • Show More...

• Brand

  

  • 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS (1)
  • ABB (35)
  • ABB INC., LOW VOLTAGE PRODUCTS (2)
  • Blackburn Mechanical (9)
  • BURNDY (38)
  • Burndy LLC (4)
  • COLOR-KEYED (10)
  • Connector Bloks(TM) (16)
  • Dottie (1)
  • Eaton (22)
  • Eaton Corp (5)
  • EATON CUTLER-HAMMER (19)
  • Highland (11)
  • Homac (1)
  • Ideal (13)
  • Ilsco (7)
  • Minnesota Mining (3M) (1)
  • NSi (48)
  • Nsi Industries (21)
  • PANDUIT (47)
  • Panduit Corporation (4)
  • Panduit® (35)
  • Platinum Tools (1)
  • Polaris (2)
  • Scotchlok (20)
  • Selecta Products (2)
  • Sta-Kon (113)
  • Thomas & Betts (5)
  • Thomas&Betts-Abb Ins Prod (7)
  • Tools & Accessories (1)
  • Viton(R) (1)
  • WAGO CORPORATION (2)
  • Weidmuller, Inc. (13)
  • XX-Marathon Special Products (4)
  • Show More...

• Sub Brand

  

  • Blackburn (9)
  • Burndy (3)
  • Color-Keyed (9)
  • Dragon Tooth In (1)
  • Entrelec (10)
  • Highland(TM) (9)
  • Ideal (1)
  • Klippon(R) (13)
  • Miniterms (1)
  • NSI (3)
  • Pan-Lug (3)
  • Powerplug(R) (2)
  • Spec-Kon (1)
  • Sta-Kon (27)
  • Type CTAPF (1)
  • Type LAM (2)
  • Type LCD (4)
  • Show More...

• Material

  

  • Aluminum (39)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum body -Glass Filled Polyester Base (2)
  • Aluminum body -Glass Filled Polyester Base (3)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • Brass (6)
  • Carrying Case is Plastic (1)
  • Clear Acrylic (3)
  • Copper (189)
  • Insulated Nylon (1)
  • Nickel Alloy (1)
  • Nylon 66 (2)
  • Nylon Housing, Copper Alloy Contacts (2)
  • Polyamide (28)
  • Polyester (1)
  • Steel (Screw) (5)
  • TIN PLATED BRASS (2)
  • Tin-Plated Copper (5)
  • Vinyl (1)
  • Vinyl Insulation (2)
  • Zinc-Plated Steel Screw (1)
  • Show More...

• Minimum Conductor Size

  

  • #12 AWG (20)
  • #14 AWG (1)
  • #16 AWG (8)
  • #18 AWG (6)
  • #20 AWG (1)
  • #22 AWG (2)
  • #24 AWG (3)
  • #26 AWG (3)
  • #6 AWG (1)
  • #6 AWG (Stranded) (3)
  • 0.08 mm^2;28 AWG (2)
  • 16 AWG (1)
  • 20 AWG (1)
  • 22 AWG (1)
  • 26 AWG (5)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (1)
  • #10 AWG (18)
  • #10 AWG/4 sq.mm (2)
  • #12 AWG (2)
  • #12 AWG/2.5 sq.mm (1)
  • #14 AWG (14)
  • #14 AWG/1.5 sq.mm (1)
  • #16 AWG/1.5 sq.mm (2)
  • #18 AWG (2)
  • #2 AWG (2)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (1)
  • #2 AWG (Run);35 sq.mm (Run);#4-#2 AWG (Tap);25-35 sq.mm (Tap);#1 AWG (Run);35 sq.mm (Run);#4-#3 AWG (Tap);25 sq.mm (Tap);1/0 AWG (Run);50 sq.mm (Run);#12-#4 AWG (Tap);4-25 sq.mm (Tap) (1)
  • #4 AWG (1)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (Stranded);#14 AWG (Solid) (1)
  • #6 AWG (5)
  • #8 AWG (2)
  • #8 AWG/6 sq.mm (1)
  • 1/0 AWG (1)
  • 1/0 AWG (Stranded);#4 AWG (Solid) (1)
  • 10 AWG (1)
  • 12 AWG (4)
  • 14 AWG (1)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (3)
  • 250 kcmil (1)
  • 250 kcmil (Stranded) (1)
  • 250 MCM (2)
  • 350 kcmil (Stranded) (1)
  • 4/0 AWG (2)
  • 8 AWG (2)
  • Standard Conductor-Main:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Standard Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Campact Conductor-Main:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded), 3/0, 2/0, 1/0, #1 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0 AWG (ACSR), 3/0, 2/0 AWG (Stranded), 4/0, 3/0 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0,1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded), 3/0, 2/0 AWG (Solid);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded) (1)
  • Show More...

• Insulation Material

  

  • Nylon (5)
  • Vinyl (36)
  • Wemid (10)
  • Show More...

• Conductor Material

  

  • Aluminum (9)
  • Brass (1)
  • Brass with Copper Sleeve (2)
  • Copper (60)
  • Copper Alloy (Contacts) (2)
  • Copper;Aluminum (4)
  • Polyamide 66 (2)
  • Steel (1)
  • Show More...

• Insulation Color

  

  • Black (2)
  • Black (Code) (1)
  • Black (Die Color) (1)
  • Blue (17)
  • Blue (Code) (2)
  • Blue (Die Color) (1)
  • Brown (Die Color) (1)
  • Dark Beige (9)
  • Gray (5)
  • Gray (Die Color) (1)
  • Green (Die Color) (1)
  • Green/Yellow (2)
  • Orange (4)
  • Orange (Code) (1)
  • Pink (Die Color) (1)
  • Purple (Code) (1)
  • Purple (Die Color) (1)
  • Red (4)
  • Red (Die Color) (1)
  • Red;Blue;Yellow (1)
  • Silver (1)
  • White (1)
  • Yellow (18)
  • Yellow (Code) (1)
  • Yellow (Die Color) (1)
  • Show More...

• Number Of Conductors

  

  • 1 (24)
  • 2 (28)
  • 3 (2)
  • 4 (3)
  • Show More...

• Voltage Rating

  

  • 12 VDC (1)
  • 150 W (1)
  • 1k VAC (4)
  • 24 VDC (2)
  • 300 (2)
  • 300 V (5)
  • 35 (3)
  • 35 kV (7)
  • 500 W (2)
  • 600 (39)
  • 600 A (1)
  • 600 V (159)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (5)
  • 600 V ac (24)
  • 600 V ac/dc (1)
  • 630V (2)
  • 800 W (1)
  • D716-2 (1)
  • EN 550V, UL 600V, 800V connection (3)
  • IEC 500V, UL 150V (4)
  • IEC 800V, EN 700V, UL 600V (7)
  • NA (2)
  • UL 300V (2)
  • Show More...

• Current Rating

  

  • 10/15/17.5 A (2)
  • 150 A (1)
  • 175 A (3)
  • 230 AMPERE (1)
  • 24 A (5)
  • 255 AMPERE (1)
  • 30 A (5)
  • 30/36 A (1)
  • 310 A (2)
  • 32 A (1)
  • 350 A (4)
  • 380 A (2)
  • 40/50/57 A (1)
  • 41 A (1)
  • 6.3 A (1)
  • 6.3/15 A (1)
  • 600 A (1)
  • 620 A (1)
  • 760 A (3)
  • 760 AMPERE (1)
  • 80 AMPERE (1)
  • 85 AMPERE (1)
  • Show More...

• Special Features

  

  • # 2 AWG (STR) - # 4 Pin Size (1)
  • # 4 AWG (STR) - # 4 Pin Size (1)
  • (1) 250 MCM-6 AWG (Line Side) - (1) 250 MCM-6 AWG (Load Side) - 310 Amps Per Pole (1)
  • (1) 350 MCM-6 AWG (Line Side) - (1) 350 MCM-6 AWG (Load Side) - 350 Amps Per Pole (1)
  • (1) 350 MCM-6 AWG (Line Side) - (12) 4-14 AWG (Load Side) - 310 Amps Per Pole (1)
  • (1) 350 MCM-6 AWG (Line Side) - (6) 4-14 AWG (Load Side) - 310 Amps Per Pole (1)
  • (1) 500 MCM-4 AWG (Line Side) - (1) 500 MCM-4 AWG (Load Side) - 380 Amps Per Pole (1)
  • (2) 1/0-14 AWG - Dual Rated - Offset Ports (1)
  • (2) 2/0-14 AWG (Line Side) - (12) 4-14 AWG (Load Side) - 350 Amps Per Pole (1)
  • (2) 2/0-14 AWG (Line Side) - (6) 2-14 AWG (Load Side) - 350 Amps Per Pole (1)
  • (2) 2/0-14 AWG (Line Side) - (6) 4-14 AWG (Load Side) - 350 Amps Per Pole (2)
  • (2) 3/0-6 AWG - Dual Rated - Offset Ports (1)
  • (2) 4-14 AWG - Dual Rated - Offset Ports (1)
  • (2) 750-250 MCM - Dual Rated (1)
  • (3) 3/0-6 AWG - Dual Rated (1)
  • 1/0 AWG (STR) - # 2 Pin Size (1)
  • 1-10 number sequence (1)
  • 11-20 number sequence (1)
  • 2/0 AWG (STR) - # 1 Pin Size (1)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 30 Amp Double Row Terminal Blocks (1)
  • 300 MCM (STR) - 4/0 CU Pin Size (1)
  • 300 MCM (STR) - 4/0 Pin Size (2)
  • 35 mm Unplated Aluminum Alloy - 1.1 cm Oval Mounting Holes .4 cm apart (1)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 350 MCM (STR) - 4/0 CU Pin Size (1)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 400 MCM (STR) - 300 Pin Size (1)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 507 Piece Kit Containing The Most Popular Miniterm Terminals (1)
  • 600 MCM (STR) - 350 CU Pin Size (1)
  • 600 MCM (STR) - 400 Pin Size (1)
  • 750 MCM (STR) - 500 Pin Size (2)
  • 8 STR-14 SOL - CU Only - 100 Pack (1)
  • Barrel Style Butted (2)
  • Butted Seam Barrel (1)
  • Butted Seam-Construction Prevents Splitting Under Maximumpressure;Internal Barrel Serrations Grip Wires Tightly to Resist Pull-Out and Reduce Electrical Resistance;Tin Plated Brass Construction For Corrosion Resistance;Shouldered Barrel Insulation Quickly Positions Terminal For Proper Crimping;Expanded Insulation Entry Accomodates a Wide Variety Of Insulation Diameters and Provides Additional Insulation Support;Color-Coded Insulation and Wire Range Stamped On Terminal For Easy Identification (1)
  • Catalog numbers ending with the suffix X indicate an expanded insulation grip. This means a wider wire entry to accommodate heavy wall insulation. Ring terminals Won't fall free even if the mounting screw loosens (3)
  • Constructed from Aluminum for High Conductivity;Solid Center Barriers and Large Chamfers for Easy Cable Insertion;Touch Stabilized Nylon Sleeves Resist Installing-Tool Pressure and Provide Reliable 600 Volt Insulation;Prefilled with Oxide Inhibitor (3)
  • Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V (2)
  • Degree of protection: IP20 (5)
  • Designed to Penetrate Magnet Wire Insulation During Application;Eliminating The Need For Stripping;Brazing;Welding or Other Methods Of Joining Magnet Wire. (1)
  • Dual Barrel Provides Termination of two Conductors;High Strength (2)
  • Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver (1)
  • Easy Entry Copper Insulation Sleeve (2)
  • Excellent Crimp Forming Properties;Electro-Tin Plated (1)
  • Expanded Entry;Brazed Seams;Internal Barrel Serrations (2)
  • Features (12) 250T - Dual Rated (1)
  • Features (8) 2T - (4) 250T - Dual Rated (1)
  • Features: Also Available In Nylon Insulated And Non-Insulated Brazed Seam; Solderless Terminals Are Available In Both Poly Zip-Lock And Bulk Packaging; The Pieces Per Bag Column Refers To The Poly Zip-Lock Bag Packaging Has A 1000 PC Minimum Multiples ; Stud Size: 10; Insulation: Vinyl Insulated; Cma Range: 5180 - 13100; Insulation Diameter: 0.260 IN; Barrel Inside Diameter: 0.131 IN; Width: 0.310 IN; Length: 110 IN; Dimension C: 0.280 IN; Dimension E: 0.830 IN; Number Of Pieces: 75; Package Type: Poly Zip (1)
  • Features: Butted Seam-Construction Prevents Splitting Under Maximumpressure; Internal Barrel Serrations Grip Wires Tightly To Resist Pull-Out And Reduce Electrical Resistance; Tin Plated Brass Construction For Corrosion Resistance; Shouldered Barrel Insulation Quickly Positions Terminal For Proper Crimping; Expanded Insulation Entry Accomodates A Wide Variety Of Insulation Diameters And Provides Additional Insulation Support; Color-Coded Insulation And Wire Range Stamped On Terminal For Easy Identification (1)
  • Features: Clear Plastisol covered AL6061-T6 aluminum body, Saves time, lowers installation costs, eliminates taping, Oxide inhibitor pre-installed, Inhibits moisture and contaminants from entering the contact area (1)
  • Features: Dual-Rated Panelboard Lugs Are Constructed From High Strength Extruded Aluminum Alloy And Electro Tin-Plated To Provide Low Contact Resistance, Dimension T: 0.31 IN, Dimension N: 0.47 IN, Dimension D: 0.94 IN, Length: 3 IN, Installation Torque: 275 IN-LB, Width: 1 IN, Stud/bolt Hole Size: 5/16 IN, Height: 2 IN (1)
  • Features: Expanded Insulation Support Accepts Standard And Large Wire Diameters, Lowers Inventory Requirements, Permits Greater Flexibility And Provides Insulation Support, Funnel Entry, Easy Wire Insertion, Manufactured Of Pure Electrolytic Copper, Provides Maximum Conductivity, Low Resistance And Ductility For Excellent Crimp Forming Properties, Deep V Groove Serrations In The Inner Barrel, Provides Added Holding Strength And Better Conductivity, Electro-Tin Plated, Provides Durable Long-Lasting Corrosio (1)
  • Features: Provides Easy Connection Of Multiple Circuits, Use With Terminal Strip Series 89-200 (1)
  • Features: Solderless Terminals Are Available In Both Poly Zip-Lock And Bulk Packaging; The Pieces Per Bag Column Refers To The Poly Zip-Lock Bag Packaging Has A 1000 PC Minimum Multiples ; Nema Tab: 032 X 0.250 IN; Insulation: Vinyl Insulated; Cma Range: 2050 - 5180; Insulation Diameter: 0.140 IN; Barrel Inside Diameter: 070 IN; Width: 0.310 IN; Length: 0.870 IN; Dimension B: 0.234 IN; Number Of Pieces: 100; Package Type: Poly Zip-Lock Bag (1)
  • Features: The INSULUG Type YAEV Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Term (2)
  • Features: The Type TP-F Is A Fork Tongue Variation Of The TP Design And Makes Installation Easier, 600 V Maximum, 105 DEG C Max, Fork Tongue Design: Faster Installation-Screw Needs Only To Be Loosened For Termination, Installation Tool: Plier Type: Y10-22 Tool, Ratchet: MR8-89-1 Tool, Insulation Diameter (maximum): 0.145 IN, Bulk Catalog Number: BA16EF10, Tape Mounted Catalog Number: BA16EF10M, Temperature Rating: 105 DEG C Maximum, Color Code: Red, Wire Strip Length: 13/64 IN, Finish: Electro-Tin Plated, (1)
  • Features: The Type TP-F Is A Fork Tongue Variation Of The TP Design And Makes Installation Easier, 600 V Maximum, 105 DEG C Max, Fork Tongue Design: Faster Installation-Screw Needs Only To Be Loosened For Termination, Insulation Diameter (maximum): 0.18 IN, Tape Mounted Catalog Number: BA14EF10M, Installation Tool: Plier Type: Y10-22 Tool, Ratchet: MR8-89-1 Tool, Temperature Rating: 105 DEG C Maximum, Bulk Catalog Number: BA14EF10, Wire Strip Length: 13/64 IN, Color Code: Blue, Wire Insulation Grip: No, Fi (1)
  • Features: The Type TP-F Is A Fork Tongue Variation Of The TP Design And Makes Installation Easier, 600 V Maximum, 105 DEG C Max, Fork Tongue Design: Faster Installation-Screw Needs Only To Be Loosened For Termination, Tape Mounted Catalog Number: BA14EF8M, Insulation Diameter (maximum): 0.18 IN, Bulk Catalog Number: BA14EF8, Temperature Rating: 105 DEG C Maximum, Installation Tool: Plier Type: Y10-22 Tool, Ratchet: MR8-89-1 Tool, Color Code: Blue, Wire Strip Length: 13/64 IN, Finish: Electro-Tin Plated, Wi (1)
  • Features: The Type TP-F Is A Fork Tongue Variation Of The TP Design And Makes Installation Easier, 600 V Maximum, 105 DEG C Max, Fork Tongue Design: Faster Installation-Screw Needs Only To Be Loosened For Termination, Tape Mounted Catalog Number: BA16EF8M, Insulation Diameter (maximum): 0.145 IN, Bulk Catalog Number: BA16EF8, Temperature Rating: 105 DEG C Maximum, Installation Tool: Plier Type: Y10-22 Tool, Ratchet: MR8-89-1 Tool, Wire Strip Length: 13/64 IN, Color Code: Red, Wire Insulation Grip: No, Fini (1)
  • Features: These Dual-Rated One-Conductor Lugs Are Constructed From High Strength Aluminum Alloy And Electro Tin-Plated To Provide Low Contact Resistance, Dimension T: 0.44 IN, Number Of Screws: 1, Stud/bolt Hole Size: 3/8 IN, Dimension D: 1.72 IN, Dimension N: 0.78 IN, Set Screw Type: Allen Key, Installation Torque: 500 IN-LB, Length: 3.19 IN, Height: 1.56 IN, Width: 1-1/2 IN (1)
  • Features: These Dual-Rated One-Conductor Lugs Are Constructed From High Strength Aluminum Alloy And Electro Tin-Plated To Provide Low Contact Resistance, Stud/bolt Hole Size: 3/8 IN, Dimension D: 13 IN, Dimension N: 0.88 IN, Number Of Screws: 1, Dimension T: 0.25 IN, Set Screw Type: Allen Key, Installation Torque: 375 IN-LB, Length: 2.25 IN, Height: 1.12 IN, Width: 1.13 IN (1)
  • Features: Tin-Plated Brass Construction For Corrosion Resistance; Brazed Or Butted Seams Prevent Splitting; Funnel Entry Insulators; Beveled Barrel Openings Provide Easy Wire Entry; Clearly Marked Wire And Stud Ranges; Color-Coded Insulation; Tab Size: 0.110 IN X 020 IN; Temperature Rating: 75 DEG C (1)
  • Features: Torque Rating of 16 in-lbs; Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating temperature rated from 130°C (260°F) to -40°C (-40°F); UL Recognized (E62622) and CSA Certified (LR15364).; Number Of Circuits: 6; Torque Rating: 16 IN-LB; Terminal Screw Size: 6 (1)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available; Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operatin (1)
  • Features: Torque Rating of 16 in-lbs; Rugged base eliminates breakage; Center spacing of 0.562 inch (14.3mm); Accepts up to #10 AWG wire; Corrosion resistant surface plates with #8 philslot screws; Rated up to 600V, 30A; Accessory jumpers available;Heavy-duty, corrosion-resistant screws, surface plates and optional hardware; Accessory hardware provides a variety of termination options; Available cover helps prevent contact with live terminals; Rugged polyester thermoplastic base (UL Rated 94V-0); Operating (4)
  • Ferrules ensure reliable electrical connections when terminating conductors in screw clamp terminal blocks (1)
  • Flame Retardant (1)
  • For aluminum and copper concentric conductors and compact code aluminum strandings (1)
  • For Cross Connections in The Bridge Shaft (1)
  • For easily installed, permanent terminations of solid, round, or stranded nichrome wires as used in toasters, heaters, etc (1)
  • For Power Connector Applications up to 35KV (1)
  • For use with Large Connector Blocks - # 12 Bolt Size (1)
  • For use with Medium Connector Blocks - # 9 Bolt Size (1)
  • For use with Small Connector Blocks - # 6 Bolt Size (1)
  • Funnel-Designed, Polyvinyl Chloride Sleeve Offers Easy Insertion of Wires (6)
  • Funneled Barrel Entry, Deep Internal Serrations, Brazed or overlapping seams (3)
  • Funneled Barrel Entry;Deep Internal Serrations;Brazed or Overlapping Seams. (1)
  • High Temp (1)
  • Horizontal markings (3)
  • In Butt Splices;The Wires are Butted Together and Crimped at Each End Of The Splice. These Splices are Color-Coded According to Wire Size. (1)
  • Inner bronze insulation grip sleeve lengthens flex radius of conductor and eliminates conductor creep. Nylon jacket is color-coded (8)
  • Kit includes: 12 different Sta-Kon Terminals, WT112M Hand Tool, Package of TY525M Cable Ties and a WM-0 THRU 9 Wire Marker Book (1)
  • Locking fork terminals have a specially designed tongue that lets them go on like a fork and stay on like a ring (22)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (6)
  • Made of High Copper Alloy;Re-usable (3)
  • Meets Cec and Nec Code Changes For Non-Residential Fluorescent Luminaires With Ballasts;Perfect For Oem or Retrofit Lighting Applications;Patented Push-In Technology Quickly Locks Wires In Place;Passes UL 2459 & CSA 182.3 Finger Probe Requirements;Fits Through 1/2 In. Knockout;Pieces Pull Apart Safely and Easily;3/8 In. Strip Length Indicator;Thumb Ridges Provide Superior Grip;Model:102 (2)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations (15)
  • Molded Funnel Entry Insulator. Brazed Seam. Internal Barrel Serrations. (1)
  • Molded Funnel Entry Insulator;Brazed Seam;Internal Barrel Serrations (5)
  • Non-Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Non-Insulated Ring Terminal 6 AWG - 50 Pack (1)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • Protect your circuits with 5x20 mm fuse terminal blocks compliant with IEC 60947-7-3 standard (1)
  • Quickly identify the defective circuit thanks to the blown fuse indicator with leakage current less than 0.5 mA (1)
  • Recommended screw driver: 4 mm (2)
  • Recommended screw driver: 5.5 mm (2)
  • Self-insulated with high dieletric-strength nylon sleeves. An inner bronze insulation grip sleeve lengthens the flexing radius of the conductor and eliminates conductor creep (6)
  • Simplify the distribution thanks to the two jumper channels aligned with ZS4 feed through and ZS4-S-R1 disconnect terminal blocks (1)
  • Snap-in rail connection for rapid installation and removal (1)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (2)
  • These fork terminals have extra-long PVC insulation sleeve for protection and stress relief at wires flex point. Brazed seam barrel is serrated for high pull-out value. Insulation is color-coded (7)
  • These non-insulated fork terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (1)
  • These Non-Insulated Fork Terminals are Made Of Electrolytic Copper For High Conductivity. They Can Be Installed With Crimping Tools Having a Single Indentor or Double Indentor (recommended For Solid Wire). Serrated Barrel Increases Grip On Wire. (1)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire) (2)
  • These non-insulated ring terminals are made of electrolytic copper for high conductivity. They can be installed with crimping tools having a single indentor or double indentor (recommended for solid wire). Serrated barrel increases grip on wire (15)
  • These Non-Insulated Ring Terminals are Made of Electrolytic Copper for High Conductivity;They can be Installed with Crimping Tools Having a Single Indentor or Double Indentor;Serrated Barrel Increases Grip on Wire (1)
  • These terminals are self-insulated with a PVC insulation sleeve of extra length to give protection and relieve bending stress at wires flex point. Brazed seam barrel is serrated to obtain high pull-out value (13)
  • These Terminals are Self-Insulated With a PVC Insulation Sleeve Of Extra Length to Give Protection and Relieve Bending Stress at Wires Flex Point. Brazed Seam Barrel Is Serrated to Obtain High Pull-Out Value. (6)
  • This family of polyester blocks is ideal for high-temperature applications; The rugged material withstands temperatures up to 302 DEG F (150 DEG C); Three contact styles cover broad wire range - accept single wire or combinations from 22 - 8 AWG solid or stranded; Rated at 15 - 50 AMP per circuit; Flat-base models mount directly to surfaces, dovetail base models mount on standard channel; Only one end section needed per block assembly; Readily identifiable circuits - write directly on matte-surface of bloc (1)
  • Tin Plated to Inhibit Corrosion, Color Coded Barrel, Inspection Window, Beveled Wire Entry (3)
  • Tin-Plated to Inhibit Corrosion (4)
  • Top entry wire connection (2)
  • Two-Way Connectors Provide High Pullout Values, are Easy to Insulate and Provide a Low-Resistance Connection of High Quality and Low Installed Cost (9)
  • UL Listed 90 DEG C, 600 V - 35 KV,Tongue Angle: Straight (3)
  • Unique construction of the female disconnect offers long-term dependability. Brazed seam serrated barrel provides maximum tensile strength (2)
  • Universal terminal, These dual-rated panelboard lugs are constructed from high strength extruded aluminum alloy and electro tin-plated to provide low contact resistance (1)
  • Vertical markings (4)
  • Vinyl Insulated Pin Terminal 16-14 AWG - 100 Pack (1)
  • Vinyl Insulated Spade Terminal 12-10 AWG - 50 Pack (3)
  • Show More...

• Overall Length

  

  • 0.201 in;5.1 mm (1)
  • 0.205 in (1)
  • 0.24 in (1)
  • 0.244 in (1)
  • 0.323 in (1)
  • 0.43 in (1)
  • 0.571 in;14.5 mm (2)
  • 0.63 in (1)
  • 0.75 in (1)
  • 0.866 in;22 mm (1)
  • 0.87 in;22.098 mm (2)
  • 0.88 in (1)
  • 0.899 in (2)
  • 0.95 in;24.13 mm (1)
  • 0.97 in (6)
  • 0.986 in (2)
  • 1 in (3)
  • 1.004 in;25.5 mm (1)
  • 1.03 in (1)
  • 1.03 in;26.16 mm (1)
  • 1.03 in;26.162 mm (1)
  • 1.06 in (2)
  • 1.087 in;27.6 mm (1)
  • 1.088 in (1)
  • 1.09 in (3)
  • 1.125 in (1)
  • 1.13 in (2)
  • 1.16 in (2)
  • 1.25 in (1)
  • 1.26 in;32 mm (1)
  • 1.29 in (1)
  • 1.319 in;33.5 mm (1)
  • 1.378 in;35 mm (1)
  • 1.47 in;37.3 mm (1)
  • 1.50 in (1)
  • 1.516 in;38.5 mm (3)
  • 1.54 in (1)
  • 1.575 in;40 mm (1)
  • 1.584 in (1)
  • 1.63 in (1)
  • 1.75 in (1)
  • 1.82 in;46.2 mm (1)
  • 1.831 in;46.5 mm (4)
  • 1.88 in (1)
  • 1.95 in (1)
  • 1.99 in;50.5 mm (1)
  • 10 mm (1)
  • 1-11/15 in (1)
  • 1-13/15 in (1)
  • 1-13/16 in (1)
  • 1-7/18 in (1)
  • 2.10 in (1)
  • 2.24 in (1)
  • 2.25 in (1)
  • 2.362 in;60 mm (1)
  • 2.56 in;65 mm (1)
  • 2.56 in;65.1 mm (1)
  • 2.61 in (1)
  • 2.83 in (1)
  • 2.88 in;73 mm (1)
  • 2.9 in (4)
  • 2-25/32 in (3)
  • 2-3/16 in (1)
  • 2-7/16 in (1)
  • 3.14 in (1)
  • 3.25 in (2)
  • 3.44 in (1)
  • 3.46 in (1)
  • 4 in (4)
  • 4.37 in (1)
  • 5.2 mm (1)
  • 5.5 in (7)
  • 5.50 in (1)
  • 6.62 in (1)
  • 7.75 in (1)
  • Show More...

• Overall Width

  

  • 0.03 in (1)
  • 0.059 in;1.5 mm (1)
  • 0.079 in;2 mm (1)
  • 0.11 in;2.8 mm (1)
  • 0.201 in;5.1 mm (4)
  • 0.236 in;6 mm (1)
  • 0.24 in (1)
  • 0.24 in;6.1 mm (1)
  • 0.295 in;7.5 mm (1)
  • 0.311 in;7.9 mm (2)
  • 0.315 in;8 mm (1)
  • 0.37 in;9.5 mm (1)
  • 1.04 in (4)
  • 1.33 in (5)
  • 1.71 in (4)
  • 2.9 in (7)
  • 53 mm (1)
  • 53.5 mm (1)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Adjoining Terminal (1)
  • Block Fork (1)
  • Compression (12)
  • Compression Lug (3)
  • Compression;Crimp (9)
  • Crimp (1)
  • Disconnect Terminal (2)
  • Distribution Terminal (1)
  • Feed-Through Terminal (6)
  • Female Disconnecter (3)
  • Fork Terminal (15)
  • Ring Terminal (9)
  • Ring Tongue (3)
  • Screw (7)
  • Spade Terminal (1)
  • Splice Connector (2)
  • Tongue (4)
  • TUBULAR WIRE CLAMP WITH SCREW (1)
  • Wire Joints (1)
  • Wire Terminal Disconnect (2)
  • Show More...

• Overall Height

  

  • 0.81 in (5)
  • 1.378 in;35 mm (1)
  • 1.39 in;35.3 mm (1)
  • 1.85 in (1)
  • 1.941 in;49.3 mm (1)
  • 2.165 in;55 mm (1)
  • 2.205 in;56 mm (2)
  • 2.34 in (4)
  • 2.362 in;60 mm (3)
  • 2.62 in (4)
  • 2.75 in (1)
  • 2.815 in;71.5 mm (1)
  • 3.126 in;79.4 mm (1)
  • 3.13 in;79.5 mm (3)
  • 3.25 in (7)
  • 35 mm (1)
  • 47.3 mm (1)
  • Show More...

• For Use With

  

  • 1-Ballast Fixture New Installations and Retrofits (2)
  • 35 mm Rail (1)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (2)
  • Copper Conductor (9)
  • Copper Wire (3)
  • Flexible, Extra-Flexible, and Code Stranded Copper Conductors (3)
  • Free-Standing Studs (1)
  • Grounding and Bonding;Direct Burial in Earth or Concrete (1)
  • High Vibration Applications Encountered in Aircraft;Aboard Ships;Hospitals;Industrials;Generating Plants (1)
  • Hydraulic Tool (6)
  • Standard Conductors (3)
  • Stranded Aluminum or Copper Code Conductors (2)
  • Stranded Copper Conductors (4)
  • Terminal Block (1)
  • Show More...

• Maximum Voltage Rating

  

  • 2000 V (3)
  • 300 V (1)
  • 300/800 V (1)
  • 35 kV (13)
  • 36 V (1)
  • 400 V (2)
  • 550/600/800 V (2)
  • 600 V (15)
  • 600 V ac (7)
  • 600 V ac/dc (1)
  • 600/700/800 V (1)
  • 800 V (6)
  • Show More...

• Length

  

  • 0.1 (1)
  • 0.25 (1)
  • 0.8 (1)
  • 1.75 (1)
  • 1.82 (1)
  • 1.85 (13)
  • 1.91 (1)
  • 2 (3)
  • 2.37 (2)
  • 2.75 (2)
  • 3.25 (1)
  • 39.3 (1)
  • Show More...

• Application

  

  • Aluminum to Aluminum or Copper to Copper Magnet Wire Connections. (1)
  • Applications certified to 600 V and recommended up to 35 kV¥ (9)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (30)
  • End stops are mounted at the extremity of the terminal board assembly in order to give additional support to the terminal blocks (1)
  • Fits 5x20mm and 5x25mm fuses for circuit protection (1)
  • Fits 5x20mm fuses for circuit protection (1)
  • For Aluminum And Copper Conductors (6)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (6)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (6)
  • For High Temperature (1)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (3)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (4)
  • For Standard Conductor Splice (3)
  • For Terminal Strip Series 89-200 (1)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (12)
  • For use with SNA terminal blocks (2)
  • For use with SNK screw clamp terminal blocks (1)
  • For use with SNK terminal blocks (1)
  • Grounding Application (3)
  • Ind Facilities & Factories - Facility - Other (1)
  • NSI (21)
  • Other (8)
  • OtherInd Facilities & Factories - Facility: Power Distribution and Control (1)
  • Provides terminating point for a group of wires running in one direction (1)
  • Rail Mounting (1)
  • Stranded Aluminum or Copper Code Conductor (2)
  • Tap connections and in-line splice/reductions are made quickly and easily with the UNITAP™ line of connectors (1)
  • Terminate, Splice, Tap Power Connectors (24)
  • To be used for marking SNA terminal blocks (8)
  • Utility/Ground Grid (1)
  • Wire Termination (38)
  • Show More...

• Width

  

  • 0.1 (1)
  • 0.2 (4)
  • 0.24 (8)
  • 0.3 (1)
  • 0.32 (2)
  • 0.5 (3)
  • 0.63 (2)
  • 1.99 (1)
  • 2 (1)
  • 2.5 (1)
  • 3.25 (1)
  • Show More...

• Weight

  

  • 0.0001 lb (1)
  • 0.0018 lb (1)
  • 0.003 lb (5)
  • 0.004 lb (1)
  • 0.005 lb (1)
  • 0.006 lb (5)
  • 0.01 lb (5)
  • 0.01 lb/EA (5)
  • 0.02 lb (5)
  • 0.02 lb/EA (3)
  • 0.03 lb (4)
  • 0.03 lb/EA (2)
  • 0.04 lb (1)
  • 0.04 lb/EA (1)
  • 0.05 lb (1)
  • 0.05 lb/EA (3)
  • 0.06 lb/EA (2)
  • 0.08 lb (3)
  • 0.08 lb/EA (1)
  • 0.09 lb/EA (2)
  • 0.1 lb (1)
  • 0.11 lb (4)
  • 0.12 lb (1)
  • 0.12 lb/EA (2)
  • 0.13 lb/EA (1)
  • 0.15 lb/EA (1)
  • 0.16 lb (1)
  • 0.17 lb/EA (1)
  • 0.18 lb (1)
  • 0.2 lb (2)
  • 0.21 lb (1)
  • 0.22 lb (1)
  • 0.23 lb/EA (1)
  • 0.25 lb (1)
  • 0.25 lb/EA (1)
  • 0.37 lb (2)
  • 0.49 lb (1)
  • 0.58 lb (1)
  • 0.62 lb (1)
  • 0.63 lb (1)
  • 1.17 lb (1)
  • 1.23 lb (1)
  • 1.34 lb (1)
  • 1.36 lb (1)
  • 1.4 lb (1)
  • 1.48 lb (1)
  • 1.49 lb (1)
  • 1.93 lb (1)
  • 11.59 g (1)
  • 11.66 g (1)
  • 11.88 g (1)
  • 12.75 g (Net Weight);12 g (1)
  • 14.26 g (1)
  • 19.47 g (Net Weight);21.38 g (1)
  • 2 lb/EA (1)
  • 2.11 lb (1)
  • 2.15 lb (1)
  • 2.62 g (1)
  • 3.053 g (1)
  • 3.7 g (1)
  • 312.5 g (1)
  • 4.283 g (1)
  • 6.681 g (1)
  • 6.724 g (1)
  • 7.51 g (Net Weight);7 g (1)
  • 8.7 lb (1)
  • 9.57 g (Net Weight);9 g (1)
  • Show More...

• Package Quantity

  

  • 1 ct (12)
  • 1 CT;10 PK (1)
  • 1 CT;12 PK (2)
  • 1 CT;20 PK (1)
  • 1 CT;3 PK (2)
  • 1 CT;50 Pk (1)
  • 1 CT;6 Pk (2)
  • 10 CT (1)
  • 10 CT;100 PK (4)
  • 10 CT;50 PK (1)
  • 10 PK (2)
  • 100 CT (1)
  • 100 CT;500 PK (3)
  • 100 PC (7)
  • 1000 CT;10000 PK (6)
  • 1000 CT;20000 PK (1)
  • 1000 CT;5000 PK (2)
  • 132 CT (1)
  • 15 PK (9)
  • 20 CT;200 PK (1)
  • 20 PC (2)
  • 20 PK (1)
  • 200 CT;2000 PK (2)
  • 25 BG (9)
  • 25 CT (1)
  • 25 CT;125 PK (1)
  • 25 CT;250 PK (7)
  • 250 CT (1)
  • 250 CT;1250 PK (1)
  • 3 CT (10)
  • 50 CT (6)
  • 50 CT;200 PK (1)
  • 50 CT;250 PK (2)
  • 50 CT;500 PK (3)
  • 50 PC (3)
  • 50 PK (5)
  • 500 CT;3000 PK (1)
  • 500 CT;5000 PK (6)
  • 6 PK (2)
  • 75 CT;450 PK (1)
  • Show More...

• Category Description

  

  • Comp & Mech Lugs and Butt Splices (47)
  • Disconnect Accessories (2)
  • DISCONNECTS (3)
  • FUSE BLOCKS,FUSE HOLDERS (1)
  • Fuses & Fuse Accessories (2)
  • Miscellaneous residential devices (1)
  • Powerdefense Breakers (2)
  • SPLICE KITS (2)
  • SPLIT BOLTS (9)
  • T&B C TAP LUGS (6)
  • TERMINAL BLOCK ACESSORIES (26)
  • TERMINAL BLOCKS POWER DIST BLOCKS (111)
  • TERMINALS (275)
  • WIRE LUBE, MARKERS, & TIES (9)
  • Show More...

• Minimum Qty

  

  • 100 (39)
  • 1000 (11)
  • 15 (5)
  • 20 (5)
  • 200 (6)
  • 25 (7)
  • 50 (42)
  • 500 (7)
  • 75 (4)
  • Show More...

• Finish

  

  • Acrylic (3)
  • Aluminum (4)
  • Electro -Tin Plated (1)
  • Plastisol Insulated (5)
  • Tin Plated (28)
  • Tinned (41)
  • Tin-Plated (11)
  • Show More...

• Color

  

  • Aluminum (3)
  • Black (23)
  • Blue (57)
  • Blue Light (2)
  • Brass (1)
  • Brown (11)
  • Clear (7)
  • Dark Gray (2)
  • Gray (18)
  • Gray 0 (10)
  • Green (3)
  • GREEN/YELLOW (12)
  • Grey / Dark grey (2)
  • Metallic (22)
  • Multiple Colors (1)
  • Orange (2)
  • Pink (4)
  • Purple (2)
  • Red (37)
  • Silver (3)
  • Tan (3)
  • White (7)
  • WHITE GLOSS (1)
  • Yellow (65)
  • Yellow Handle (1)
  • Show More...

• Temperature Rating

  

  • 105 C (1)
  • 150 DEG C (4)
  • 194 (9)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (29)
  • 75 C (2)
  • 90 (1)
  • 90 C (25)
  • Show More...

• Poles

  

  • 1 (27)
  • 2 (1)
  • 3 in (2)
  • Show More...

• Type

  

  • 2-Wire Standard Version (2)
  • Aluminum Pin Adapters (1)
  • Aluminum Splice (1)
  • BIBD, Multi-Port (1)
  • Bi-Metallic Pin (3)
  • Bolted Lugs & Terminals (14)
  • Butted (4)
  • Butted Seam, Funnel Barrel (2)
  • Compression Lug (5)
  • Compression Splice Service Entrance (3)
  • Copper Terminal Lug (1)
  • Covers (3)
  • DIN RAIL (1)
  • Disconnect (7)
  • Double Primary (6)
  • Double Row (1)
  • Double Sided Entry (1)
  • END SECTION (1)
  • FEMALE DISCONNECT (1)
  • Fork Terminal (13)
  • H-Type Compression Tap Connector (6)
  • INSULATED (2)
  • Insulation Displacement (1)
  • LOCKING (3)
  • Locking Fork Terminal (6)
  • Male Disconnect Terminal (1)
  • MCB (1)
  • Mechanical Lug (2)
  • Medium Duty Terminal Block (1)
  • Miniterm Kit (1)
  • Molded case circuit breaker accessory (4)
  • Motor control renewal parts/accessories (1)
  • Multi Cable (1)
  • Non-Insulated Fork Terminal (2)
  • Non-Insulated Heavy-Duty Ring Terminal (1)
  • Non-Insulated Ring Terminal (21)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (2)
  • Nylon Insulated Open Top 90 Degree Flag Female Disconnect (2)
  • Nylon Insulated Ring Terminal (10)
  • Nylon Insulated Wire Joint (1)
  • Offset Entry (3)
  • Offset Pin (8)
  • ONE PIECE, DEAD FRONT (1)
  • Over Barrier Slip-on (1)
  • Polypropylene Insulated Ferrule (1)
  • RING (10)
  • Ring Terminal (25)
  • Ring Tongue (1)
  • Single Primary (5)
  • SNK Terminal Blocks (1)
  • Solid Pin (10)
  • SPLICE (10)
  • Splicer/Reducer (7)
  • STANDARD (5)
  • TAB STYLE (1)
  • Terminal Block (33)
  • Terminal Block Accessories (9)
  • Terminal block accessory (5)
  • Terminal block relay (3)
  • Terminal blocks (24)
  • TERMINAL KIT (1)
  • TP-F (5)
  • Transformer Lug Kit (2)
  • Vinyl Insulated (1)
  • Vinyl Insulated Butt Splice (3)
  • Vinyl Insulated Female Disconnect (2)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (23)
  • Vinyl Insulated Pin Terminal (1)
  • Vinyl Insulated Ring Terminal (34)
  • Vinyl Insulated Spade Terminal (3)
  • Vinyl Ring (1)
  • Vinyl Spade (1)
  • YA-A (1)
  • YA-E (2)
  • YAEV, Heavy Duty (2)
  • Show More...

• Wire Size

  

  • #12 AWG (1)
  • #14 AWG/2.5 mm2 (1)
  • #18 AWG (1)
  • #24-8 AWG (3)
  • #26-10 AWG (7)
  • #26-12 AWG (1)
  • #26-8 AWG (1)
  • (1) 2/0-14 AWG(LINE) - (1) 2/0-14 AWG(LOAD) (1)
  • (1) 2/0-14 AWG(Line) - (4) 4-14 AWG(Load) (1)
  • (1) 250 MCM-6 AWGG(Line) - (1) 250 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (1) 350 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (1) 500 MCM-4 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (2) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 2-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (2)
  • (2) 350 MCM-6 AWG(Line) - (2) 350 MCM-6 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(LINE) - (4) 4/0-6 AWG(LOAD) (1)
  • (3) #26-12 AWG (4)
  • 1/0-14 AWG (1)
  • 10 (20)
  • 12 - 10 AWG (1)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (2)
  • 12-10 AWG (46)
  • 14 (15)
  • 16 - 14 AWG (1)
  • 16-14 AWG (11)
  • 18 (3)
  • 18 AWG (1)
  • 18 TO 6 AWG (CE), 18 TO 4 AWG (COPPER) (1)
  • 18-14 AWG (25)
  • 2 AWG (1)
  • 22 - 10 (6)
  • 22 - 18 (1)
  • 22-10 AWG (30 Amp) - 18-14 AWG (20 Amp) (1)
  • 22-12 AWG (20 Amp) - 20-18 AWG (10 Amp) (1)
  • 22-14 AWG (1)
  • 22-16 AWG (19)
  • 22-18 AWG (1)
  • 22-18, 16-14, 12-10 AWG (1)
  • 3/0-6 AWG (2)
  • 4 AWG (3)
  • 4-14 AWG (1)
  • 6 AWG (8)
  • 750-250 MCM (1)
  • 8 (3)
  • 8 AWG (7)
  • Main: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG (1)
  • Main: 1/0 to #3 ACSR or 2/0 to #2 STR or 3/0 to #1 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 4/0 to 2/0 SOL AWG , Tap: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Main: 2/0 to 1/0 ACSR or 3/0 to 2/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 4/0 to 3/0 ACSR or 4/0 to 3/0 STR AWG , Tap: 2/0 to #1 ACSR or 2/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Show More...

• Mounting

  

  • .114 Mounting Holes (1)
  • .142 Mounting Holes (1)
  • .225 Mounting Holes (1)
  • 0.31 (7)
  • 1 (1)
  • 1.1 cm Oval Mounting Hole (1)
  • 1-1/16 (1)
  • 1-1/4 (1)
  • 15/16 (1)
  • 2 Mounting Holes (18)
  • 3/8 (3)
  • 5/16 (29)
  • 7/16 (1)
  • 7/8 (2)
  • 9/32 (2)
  • DIN 1-3 (2)
  • DIN 3 (2)
  • End-Section (Channel Mount) (1)
  • None (9)
  • One screw (1)
  • Recommendation for best usage: in horizontal assemblies, disconnect terminal blocks should be mounted with fixed foot on top (power side) so that the disconnect knife does not partially close through gravity. Furthermore, as specified per IEC 60947-7-1, disconnect terminal blocks are intended to be used for temporary disconnection at zero potential and at no load. (1)
  • SURFACE (1)
  • Three screw (1)
  • Show More...

• Spacing

  

  • 0.315 (1)
  • 0.394 (1)
  • 0.562 (6)
  • 1.5mm (3)
  • 10mm (2)
  • 16mm (1)
  • 3/8 IN (1)
  • 5.2mm (3)
  • 6mm (6)
  • 8mm (7)
  • 9/16 (1)
  • Show More...

• Height

  

  • 0.05 (2)
  • 0.2 (1)
  • 0.25 (1)
  • 0.75 (1)
  • 1.8 (1)
  • 10 (1)
  • 2 (1)
  • 2.17 (14)
  • 2.85 (1)
  • 2.88 (2)
  • 3.7 (1)
  • 3.75 (2)
  • Show More...

• Size

  

  • #10 (13)
  • #2 AWG Code (1)
  • #6 (8)
  • #6 AWG Code (2)
  • #8 (6)
  • 0.562 IN Center Spacing (1)
  • 1.5x31.9x59mm (1)
  • 1.81 in (1)
  • 1/2" (1)
  • 1/4" (8)
  • 10x53.5x35mm (1)
  • 10x56.1x48.8mm (1)
  • 16x59x58mm (1)
  • 2.598 INCH L X 1.071 INCH W X 1.929 INCH H (1)
  • 2.77x.236x3.10 (1)
  • 2/0 AWG Code (1)
  • 2-25/32 inch (3)
  • 2x89.6x111mm (1)
  • 3 MM THK (1)
  • 3.47 INCH L X 4 INCH W X 2.61 INCH H (1)
  • 3.66 INCH L X 1.25 INCH W X 1.13 INCH H (1)
  • 3/8" (2)
  • 4/0 AWG Code (1)
  • 5 INCH L X 4 INCH W X 2.61 INCH H (1)
  • 5.2x53x47.3mm (1)
  • 5.2x53x51.4mm (1)
  • 5.2x59.5x47.4mm (1)
  • 5/16" (2)
  • 62.5x6x38mm (2)
  • 6x44.5x40.5mm (1)
  • 6x53x47.3mm (1)
  • 6x59.5x47.4mm (1)
  • 8.54 INCH L X 5.5 INCH W X 3.12 INCH H (1)
  • 8x43.5x40.5mm (1)
  • 8x53x47.3mm (1)
  • 8x59.5x47.3mm (1)
  • 8x59.7x45.6mm (2)
  • L=1.09 - OD=.598 - ID=.236 - Pin Dia=.240 (1)
  • L=1.120 - W=1.250 - H=1.348 (1)
  • L=1.620 - W=1.750 - H=1.750 (1)
  • L=1.840 - W=1.870 - H=1.870 (1)
  • L=1.85 - OD=.598 - ID=.299 - Pin Dia=.240 (1)
  • L=2.00 - OD=.598 - ID=.370 - Pin Dia=.290 (1)
  • L=2.20 - OD=.850 - ID=.429 - Pin Dia=.330 (1)
  • L=2.59 - OD=.850 - ID=.535 - Pin Dia=.420 (1)
  • L=2.62 - OD=1.09 - ID=.594 - Pin Dia=.460 (1)
  • L=2.630 - W=1.830 - H=1.790 (1)
  • L=2.74 - OD=1.09 - ID=.653 - Pin Dia=.530 (1)
  • L=2.74 - OD=1.09 - ID=.716 - Pin Dia=.570 (1)
  • L=2.79 - OD=.850 - ID=.547 - Pin Dia=.420 (1)
  • L=2.79 - OD=1.09 - ID=.594 - Pin Dia=.460 (1)
  • L=2.90 - H=2.34 - W=1.04 (5)
  • L=3.07 - OD=1.31 - ID=.826 - Pin Dia=.680 (1)
  • L=3.09 - OD=1.09 - ID=.657 - Pin Dia=.530 (1)
  • L=3.09 - OD=1.09 - ID=.704 - Pin Dia=.570 (1)
  • L=3.39 - OD=1.31 - ID=.763 - Pin Dia=.620 (1)
  • L=3.39 - OD=1.31 - ID=.842 - Pin Dia=.680 (1)
  • L=3.480 - W=4.500 - H=3.500 (1)
  • L=3.787 - W=.669 - H=.570 (1)
  • L=3.79 - OD=1.46 - ID=1.02 - Pin Dia=.810 (1)
  • L=39.3 - H=10mm (1)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.00 - OD=1.46 - ID=.821 - Pin Dia=.720 (1)
  • L=4.08 - OD=1.15 - ID=.700 - Pin Dia=.496 (1)
  • L=4.08 - OD=1.16 - ID=.653 - Pin Dia=.523 (1)
  • L=4.19 - OD=1.46 - ID=1.03 - Pin Dia=.810 (1)
  • L=4.626 - W=.795 - H=.670 (1)
  • L=4.96 - OD=1.50 - ID=.921 - Pin Dia=.688 (1)
  • L=5.50 - H=3.25 - W=2.90 (5)
  • L=7.75 - W=1.93 - H=.687 (1)
  • Large Cover (1)
  • Length 1-11/16 inch (1)
  • Length 1-13/16 inch (2)
  • Length 1-7/16 inch (1)
  • Length 2-3/16 inch (1)
  • Length 2-7/16 inch (1)
  • Medium Cover (1)
  • Small Cover (1)
  • Various Sizes Included (1)
  • Show More...