Filter Your Results

• Keyword
• connector fittings

---

• Product Type

  

  • 1 1/2 Emt CMP Conn Insulated (1)
  • 1 1/2 Emt SS Conn Insulated (1)
  • 1 1/2 LT Conn Ground Lug (1)
  • 1 1/2 NPT Male Al Cord/Cab FTG Neo Bush (1)
  • 1 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 1 1/2 RGD SS Conn (1)
  • 1 1/2"X45D PVC STD Elbow SPXSP SCH80 Kraloy (1)
  • 1 1/4 Emt CMP Conn Insulated (1)
  • 1 1/4 Emt SS Conn Insulated (1)
  • 1 1/4 LT 45 Degree Conn Insulated (1)
  • 1 1/4 LT 90 Degree Conn Ground Lug (2)
  • 1 1/4 NPT Male Cord/Cab FTG Neo Bush (2)
  • 1 1/4 RGD SS Conn (1)
  • 1 1/4" Comp. Conn. Ins. (1)
  • 1 1/4" PVC Coupling Push Fit Grey Kwikon (1)
  • 1 Emt SS Conn Insulated (1)
  • 1 LT Conn Ground Lug (1)
  • 1 NPT Male Cord/Cab FTG Neo Bush (1)
  • 1 RGD SS Conn (1)
  • 1 SS316 Emt Comp Conn (1)
  • 1 SS316 FLX Conn Male 90 (1)
  • 1" 375-750 Cord Grip Conn Kit STL (1)
  • 1" 3PIECE CPLNGS STL (1)
  • 1" Flex CONN90° W/Insul Throat (1)
  • 1" Hub WTR TGT STL (1)
  • 1" PVC Connector Ent to Emt Kwikon (1)
  • 1" Screw On Connection (1)
  • 1" Screw On Straight C (1)
  • 1" SS Conn. Ins. (1)
  • 1/2 Emt SS Conn Insulated (1)
  • 1/2 LT Conn Al (1)
  • 1/2 NPT 90 Deg Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1/2 RGD SS Conn (1)
  • 1/2 SS316 Emt Comp Conn (1)
  • 1/2" 125-650 Cord Grip Conn Kit STL (1)
  • 1/2" 3PIECE CPLNGS STL (1)
  • 1/2" 90 Screw On NMLT (1)
  • 1/2" Rig Comp Connstl (1)
  • 1/2" Rig Comp CPLNGS STL (1)
  • 1/2" SS Conn. Ins. Zinc (1)
  • 1/2" Uf Conn. (1)
  • 1/2IN 90D LT Noninsul Conn Alum (1)
  • 1-1/2 SS316 Emt Comp Conn (1)
  • 1-1/2" 2-Screw Adaptabl (1)
  • 1-1/2" 3PIECE CPLNGS STL (1)
  • 1-1/2" Angle Conn. Mall (1)
  • 1-1/2" Comp. Conn. Ins. Zinc (1)
  • 1-1/2" Hub WTR TGT STL (1)
  • 1-1/2" PVC LT 90DEG Con (1)
  • 1-1/2" Squeeze Conn. (1)
  • 1-1/2IN 90D LT Noninsul GRND Conn I (1)
  • 1-1/2IN STR LT Cordconn 1.39-1.6nyl (1)
  • 11/4 In 90 Deg Nometalic Type A Con (2)
  • 1-1/4 SS316 Emt Comp Conn (1)
  • 1-1/4" 2-Screw Adaptabl (1)
  • 1-1/4" 3PIECE CPLNGS STL (1)
  • 1-1/4" Angle Conn. Mall (1)
  • 1-1/4" Hub WTR TGT STL (1)
  • 1-1/4IN 45D LT Conn Typea Cond Irn (1)
  • 1-1/4IN STR LT Conn Typea Cond Irn (1)
  • 1IN 45D LT GRND Conn W/Lug Iron (1)
  • 1IN 90D LT Cord Conn .77-.895 Nyl (1)
  • 1IN 90D LT Noninsul GRND Conn Irn (1)
  • 1IN Wire Mesh Grip Assy (1)
  • 2 1/2 Emt RGD SS Conn Insulated (1)
  • 2 1/2 In Threadless Coupling (1)
  • 2 1/2 LT 90 Degree Conn (1)
  • 2 1/2 LT Conn (1)
  • 2 1/2 RGD CMP Conn (1)
  • 2 1/2 RGD CMP CPL (1)
  • 2 Emt CMP Conn Insulated (1)
  • 2 Emt SS Conn Insulated (1)
  • 2 In T&B Zinc Grounding Conduit Hub (1)
  • 2 In Threadless Coupling (1)
  • 2 LT Conn Ground Lug (1)
  • 2 NPT Male Cord/Cab FTG Neo Bush (1)
  • 2 RGD SS Conn (1)
  • 2 SS316 Emt Comp Conn (1)
  • 2" 90 Deg Conn. (1)
  • 2" Hub WTR TGT STL (1)
  • 2.5 Inch Conn, Sscrew, Emt, STL, Insul (1)
  • 2-1/2" Emt Rig Dual RTD Con STL/Ins THRT (1)
  • 2-1/2" LQDT. Conn. 90 Deg (1)
  • 2-1/2" Squeeze Conn. (1)
  • 2-1/2"Multi Range MC (1)
  • 2IN 90D LT Noninsul GRND Conn Irn (1)
  • 3 1/2 Emt CMP Conn (1)
  • 3 1/2 Emt CMP CPL (1)
  • 3 1/2 Emt CMP Raintight Insulated (1)
  • 3 1/2 Emt RGD SS Conn (1)
  • 3 1/2 Emt RGD SS Conn Insulated (1)
  • 3 1/2 Emt RGD SS CPL (1)
  • 3 1/2 RGD CMP Conn (1)
  • 3 1/2 RGD CMP CPL (1)
  • 3 1/2" Angle Conn. (1)
  • 3 1/2" Comp. Conn. (1)
  • 3 Emt RGD SS Conn Insulated (1)
  • 3 In Insul Ground Liq Tight 90 Deg (1)
  • 3 RGD CMP CPL (1)
  • 3" Angle Conn. (1)
  • 3" Emt Rig DLRTD Comp Con STL/Ins THRT (1)
  • 3" Emt Rig DLRTD Comp Conn Raintgt STL (1)
  • 3" Hub WTR TGT STL (1)
  • 3" LQDT. Conn. 90 Deg (1)
  • 3" Squeeze Conn. (1)
  • 3/4 Black Beauty Cord Fit .250-.400 (1)
  • 3/4 In Emt Comp Conn Insul Steel (1)
  • 3/4 LT Conn Ground Lug (1)
  • 3/4 NPT Male Cord/Cab FTG Neo Bush (2)
  • 3/4 RGD SS Conn (1)
  • 3/4 SS Conn. Ins. Zinc (1)
  • 3/4 SS316 Emt Comp Conn (1)
  • 3/4 SS316 FLX Conn Male 90 (1)
  • 3/4 SS316 FLX Conn Male STR (1)
  • 3/4" 125-880 Cord Grip Conn Kit STL (1)
  • 3/4" 3PIECE CPLNGS STL (1)
  • 3/4" 90 Screw On NMLT (1)
  • 3/4" Barrel Type NM-B Cable CO (1)
  • 3/4" K.O to Multi Port NM Conn (1)
  • 3/4" Rain Tight Extd Thread (1)
  • 3/4IN STR LT Noninsul Conn Alum (1)
  • 3/4IN Wire Mesh Grip Assy (1)
  • 3/8 LQDT. Conn. (1)
  • 3/8 LQDT. Conn. 90 Deg (1)
  • 3/8 LT 90 Degree Conn (1)
  • 3/8 LT Conn (1)
  • 3/8" 90 Screw On NMLT (1)
  • 3/8" Screw-In Conn. (1)
  • 3/8" Snap-In 90 Deg FMC Conn (1)
  • 3/8-1/2 In Duplex Box Conn (1)
  • 3/8-1/2 In Straight Box Conn (1)
  • 3-1/2" Set Screw Conn. Zinc (1)
  • 3-1/2" Squeeze Conn. (1)
  • 3-1/2" Squeeze Conn. Zinc (1)
  • 3-1/2"Emt Rig Dual RTD Comp Conn STL (1)
  • 4 Inch Conn, Sscrew, Emt, STL, Insul (1)
  • 4 LT 90 Degree Conn (1)
  • 4 RGD CMP Conn (1)
  • 4 RGD CMP CPL (1)
  • 4" Angle Conn. (1)
  • 4" Emt Rig DLRTD Comp Con STL/Ins THRT (1)
  • 4" LQDT. Conn. (1)
  • 4" Squeeze Conn. (1)
  • 4" Squeeze Conn. Zinc (1)
  • 90° Connector (17)
  • 90°Connector (17)
  • AC/MC Single Screw Strap Type Connector (5)
  • Angle Plate Connector (1)
  • Cable Connector (4)
  • Cable Gland (4)
  • CH Myers 1 1/2 Alum Through Bulkhead (1)
  • CH Myers 1 Alum Through Bulkhead (1)
  • CH Myers 2 Alum Through Bulkhead (1)
  • CH Myers 3/4 Alum Through Bulkhead (1)
  • Commercial Fittings (14)
  • Commercial Hub (10)
  • Compression (16)
  • Compression Connector (17)
  • Compression Coupling (8)
  • Conduit Body (90)
  • Conduit Body and Cover (4)
  • Conduit Body Cover (1)
  • Conduit Coupling (1)
  • Conduit Locknut Wrench, 1/2", 3/4" (1)
  • Conduit Nipple (1)
  • Conduit Outlet Box (8)
  • Conduit Union (13)
  • Connector (40)
  • Cord Gland (13)
  • Cord Grip Connector (6)
  • Cord Grip Connector Kit (2)
  • Coupler (4)
  • Coupling (14)
  • Cover (2)
  • Deluxe Cord Grip (2)
  • Device Box (9)
  • Double Snap Cable Connector (1)
  • Duplex Connector (2)
  • Elbow (5)
  • Emt Compression Connector (56)
  • Emt Compression Coupling (27)
  • EMT Concrete Tight Connector (5)
  • EMT Concrete Tight DC Connector (9)
  • EMT Connector (1)
  • Emt Set Screw Connector (27)
  • Emt Set Screw Coupling (14)
  • EMT SS Diecast Connector (9)
  • Flexible Connector (6)
  • Ground Connector (5)
  • Ground Rod Clamp (3)
  • Grounding Bushing (2)
  • Hub Connector (9)
  • Ins 3/8" Saddle GRP RN (1)
  • Insul.90 Deg Liquidtite GRD FTG 1/2 (1)
  • Insulated Connector (7)
  • Knockout Hub (20)
  • Liquid Tight 45° Connector (16)
  • Liquid Tight 45°Connector (16)
  • Liquid Tight 90° Connector (23)
  • Liquid Tight 90°Connector (23)
  • Liquid Tight Connector (4)
  • Liquid Tight Flexible 90°Connector (1)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Ground 45° Connector (1)
  • Liquid Tight Ground 45°Connector (1)
  • Liquid Tight Ground Connector (1)
  • Liquid Tight Straight Connector (45)
  • Liquidtight Conduit Connector (2)
  • Liquidtight Connector (1)
  • Mechanical (55)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic 90° Connector (4)
  • Non-Metallic 90°Connector (4)
  • Non-Metallic Cable Connector (2)
  • Non-Metallic Liquid Tight 90° Connector (2)
  • Non-Metallic Liquid Tight 90°Connector (5)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Nonmetallic Liquid-Tight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Conduit Connector (6)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Straight Connector (6)
  • Pull Elbow (1)
  • PVC Coated Steel Rigid Conduit Standard Radius Elbow (3)
  • Raintight Connector (6)
  • Romex Connector (2)
  • RUN/TAP (2)
  • Saddle Grip Connector (5)
  • Screw-On Liquid Tight Connector (1)
  • Sealing Fitting (18)
  • Set Screw Connector (1)
  • Set Screw Coupling (6)
  • Set Screw EMT Connector (8)
  • Snap 2 It Connector 38 (1)
  • Squeeze Connector (16)
  • Strain Relief Connector (11)
  • Strain Relief Cord Connector (2)
  • Strap Connector (13)
  • Structuredground™ GCC6X6250-250 Cross Con, 250-250, 1/2-5/8" (1)
  • Structuredground™ GCC6X6500-250 Cross Con, 500-250, Copper, (1)
  • Structuredground™ UGB2/0-414-12 Universal GRD Bar, Silver, C (1)
  • Threadless Coupling (6)
  • TMC Armored Cable Gland (4)
  • U-Connector (5)
  • Union (8)
  • Watertight Hub (6)
  • Wireway Connector 10X10 (1)
  • Show More...

• Brand

  

  • 3M (1)
  • 98010027731 (2)
  • Abb Installation Products, Inc (3)
  • American Fittings Corp (22)
  • Amfico (34)
  • Anamet Electrical Inc (1)
  • Appleton (91)
  • Appleton/Oz Gedney (2)
  • APPOZGCOMM (7)
  • ARLINGTON (30)
  • Arlington Industries (42)
  • Bridgeport (214)
  • Bridgeport Fittings (135)
  • BURNDY (77)
  • Burndy LLC (1)
  • CALBRITE (9)
  • Calpipe Industries, Inc (3)
  • Carlon (3)
  • Connector Bloks(TM) (1)
  • COOPER WIRING DEVICES (1)
  • Crouse-Hinds (1)
  • Eaton (157)
  • EATON CROUSE-HINDS SERIES (139)
  • Eaton Wiring Devices (2)
  • Galvan Industries (1)
  • Hubbell Wiring Devices (2)
  • Ipex Usa LLC-233406 (2)
  • KICHLER (1)
  • Kindorf (2)
  • Klein Tools (2)
  • Kraloy (11)
  • KWIKON (3)
  • LH DOTTIE (3)
  • MILBANK (2)
  • NSi (9)
  • Nsi Industries (6)
  • nVent ERICO (6)
  • Nvent Hoffman (5)
  • O-Z/GEDNEY (4)
  • PANDUIT (6)
  • PLASTIBOND (203)
  • PLASTI-BOND (1)
  • RACO (14)
  • SNAP 2 IT (6)
  • SNAP2IT (1)
  • Southwire (1)
  • Southwire Rough Electrical Com (2)
  • Steel City (56)
  • SUPERFLEX LTD. (12)
  • Superstrut (1)
  • T&B Fittings (1)
  • T&B Ind Fitting (222)
  • T&B Liquidtight Fittings (1)
  • T&B Rigid Fittings (1)
  • TORK (1)
  • WIREMOLD (5)
  • Show More...

• Trade Size

  

  • 0.5 (9)
  • 0.75 (7)
  • 0-50 (1)
  • 1 (50)
  • 1 1/2 (1)
  • 1 1/2 IN (5)
  • 1 1/2" (1)
  • 1 1/4 (1)
  • 1 1/4 in (7)
  • 1 in (47)
  • 1 INCH (16)
  • 1.25 (5)
  • 1.25 in (2)
  • 1.5 (8)
  • 1/2 (30)
  • 1/2 in (65)
  • 1/2 INCH (13)
  • 1/2" (1)
  • 1;27 (1)
  • 1-1/2 (29)
  • 1-1/2 in (34)
  • 1-1/2 in;35 mm (1)
  • 1-1/2 INCH (7)
  • 1-1/2 Inch, 2 Inch (1)
  • 1-1/4 (27)
  • 1-1/4 in (33)
  • 1-1/4 INCH (11)
  • 2 (26)
  • 2 1/2 in (7)
  • 2 1/2 x 2 (1)
  • 2 1/2" (2)
  • 2 Conduit (1)
  • 2 in (53)
  • 2 INCH (12)
  • 2" (1)
  • 2.5 (5)
  • 2-1/2 (10)
  • 2-1/2 IN (24)
  • 2-1/2 INCH (1)
  • 2-1/2 Inch, 3 Inch (2)
  • 21;3/4 (2)
  • 3 (24)
  • 3 1/2 (2)
  • 3 in (28)
  • 3 INCH (6)
  • 3 x 2 (1)
  • 3.5 (2)
  • 3/4 (23)
  • 3/4 in (90)
  • 3/4 INCH (17)
  • 3/8 (18)
  • 3/8 in (21)
  • 3-1/2 (12)
  • 3-1/2 in (5)
  • 3-1/2 INCH (1)
  • 4 (23)
  • 4 in (21)
  • 4 INCH (3)
  • 4 x 3 (1)
  • 4" (1)
  • Show More...

• Sub Brand

  

  • ABB (56)
  • Black Button(R) (2)
  • Bridgeport (8)
  • Burndy (3)
  • Commercial Fittings (1)
  • Crouse-Hinds series (1)
  • Eaton Crouse-Hinds (4)
  • Grounding (2)
  • Kellems(R) (2)
  • Kindorf(R) (2)
  • Liquidator(TM) (23)
  • Neer(TM) (6)
  • Saddlegrip(R) (3)
  • Sealproof(R) (12)
  • Shureseal(TM) (11)
  • Snap2it(R) (13)
  • Snap-Tite (1)
  • Snap-Tite;Saddlegrip(R) (2)
  • Superstrut(R) (1)
  • Show More...

• Material

  

  • 0.002 Inch Red Urethane Ferrous Metal Interior, 0.04 Inch Gray PVC Coated Ferrous Metal Exterior (1)
  • 2 MIL Red Urethane Aluminum (Interior), 40 MIL Gray PVC Aluminum (Exterior) (2)
  • 2 Mil Red Urethane Coated Aluminum Body Interior, 40 Mil Gray PVC Coated Aluminum Body Exterior (4)
  • 2 Mil Red Urethane Coated Aluminum Body Interior, 40 Mil Gray PVC Coated Ferrous Metal Body Exterior (3)
  • 2 MIL RED URETHANE COATED ALUMINUM INSIDE, 40 MIL GRAY PVC COATED ALUMINUM OUTSIDE (2)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior, 40 Mil Gray PVC Coated Ferrous Metal Body Exterior (31)
  • 2 Mil Red Urethane Coated Ferrous Metal Interior, 40 Mil Gray PVC Coated Ferrous Metal Exterior (8)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Aluminum (1)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Aluminum (Body), Stainless Steel (Screw) (6)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (29)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (Body), Stainless Steel (Screw) (61)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (6)
  • 2 MIL Red Urethane Ferrous Metal Interior, 40 MIL Gray PVC Ferrous Metal Exterior (21)
  • 40 MIL GRAY PVC EXTERIOR, 2 MIL RED URETHANE INTERIOR COATED ALUMINUM (5)
  • Aluminum (55)
  • Aluminum (Body, Gland Nut, Lock Nut);Steel (Ferrule);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (1)
  • Aluminum Body and Gland Nut, Neoprene Seal (3)
  • Aluminum Body, Neoprene Seal (2)
  • Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene (3)
  • Brass (1)
  • Bright Dipped Cast High Copper Alloy Body, Durium Silicon Bronze Hardware (1)
  • Bronze (Bridge);Paintable Plastic (Cover) (1)
  • Bronze Alloy, Leaded (4)
  • Bronze, Leaded, Commercial (4)
  • Cast Zinc (2)
  • Copper (42)
  • COPPER ALLOY (25)
  • Copper Alloy, Cast (7)
  • Copper, Beryllium (1)
  • Copperfree Aluminum (5)
  • Die Cast Zinc (13)
  • Die-Cast Zinc (77)
  • Die-Cast Zinc and Steel;Non-Metallic (Insulator) (1)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • Feraloy Iron Alloy Body and Gland Nut, Neoprene Seal (4)
  • Feraloy Iron Alloy Body, Steel Gland Nut, Neoprene Seal (1)
  • Feraloy Iron Alloy with Electrogalvanized and Aluminum Acrylic Paint (Body/Gland Nut);Neoprene (Bushing) (1)
  • Ferrous Metal (1)
  • G90 Galvanized Steel (2)
  • HIGH CONDUCTIVITY WROUGHT COPPER (1)
  • High Copper Alloy Body;Silicon Bronze (Nut;Lockwasher) (2)
  • IRON (1)
  • Malleable Iron (156)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (22)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Malleable Iron, PVC Grommets (1)
  • MILD STEEL (5)
  • Non-corrosive stainless steel (1)
  • Non-Metallic (4)
  • Nylon (21)
  • Nylon 6/6 (1)
  • Plastic (12)
  • Plastic/Zinc (1)
  • Polyamide 6 (Body, cap);Neoprene (Sealing Ring) (1)
  • Polyamide/Nylon 6.6 (4)
  • Porcelain, Steel (1)
  • PVC (9)
  • RED URETHANE (INSIDE) GRAY PVC (OUTSIDE) COATED ALUMINUM BODY, PVC SEALING GASKET (3)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR ALUMINUM (BODY), STAINLESS STEEL SCREW (1)
  • Silicon Bronze (Body) (1)
  • Silicon Bronze (Body;Screw) (2)
  • Stainless Steel (5)
  • Stainless Steel - 316 (9)
  • Stainless Steel (Mesh);Aluminum (Fitting) (2)
  • Steel (130)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel (Body/Compression Nut/Sleeve);Neoprene (O-Ring);Nylon (Ferrule);Stainless Steel (Wire Mesh) (1)
  • Steel Body and Gland Nut, Neoprene Seal (6)
  • Steel Body, Aluminum Gland Nut, Neoprene Seal (1)
  • Steel with Zinc Electroplate and Chromate Finish Coat (Body, Gland Nut);Neoprene (Bushing) (12)
  • Steel/malleable iron (1)
  • Steel;Zinc plated Steel (Ground Cones);Thermoplastic Nylon (Seal Rings);Thermoplastic Nylon (Heat Curled Insulators);Malleable Iron (1)
  • Thermoplastic (24)
  • UV-Rated Plastic (31)
  • Zamek-2, Zamek-3 Type Zinc Body and Nut, Neoprene Gasket, Lexan 920A Insuliner (10)
  • Zinc (41)
  • Zinc Alloy (1)
  • Zinc Cast (14)
  • Zinc Die Cast (83)
  • Zinc Die Cast with Spring Steel Inner Locking Ring (2)
  • Zinc Die-Cast (2)
  • Zinc Electroplated Steel (4)
  • Zinc Plated Machined Steel Screw/Malleable Iron (1)
  • ZINC PLATED STEEL (1)
  • Show More...

• Finish

  

  • #4 Polished Finish (9)
  • 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (2)
  • 2 Mil Red Urethane Coated Over Galvanized Threads Interior, 40 Mil Gray PVC Coated Exterior (4)
  • 2 MIL RED URETHANE INTERIOR, 40 MIL GRAY PVC EXTERIOR COATED (3)
  • As Cast (2)
  • Ball burnish (110)
  • Ball Burnished;Mirror Smooth (41)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Black (2)
  • Chromate, Epoxy Powder Coat/Zinc Electroplated (11)
  • DETENTE ASSEMBLY (1)
  • Electro Zinc Plated/Chromate Coating (32)
  • Electro Zinc Plated-Chromate Coated (1)
  • Electrogalvanized With Aluminum Acrylic Painted (3)
  • Electrogalvanized With Aluminum Acrylic Painted (Body), Electrogalvanized With Chromate Treatment (Nut) (1)
  • Electrogalvanized With Chromate Treatment (2)
  • Galvanized;PVC Coated (Exterior);Urethane Coated (Interior) (4)
  • Galvanized-Krom/Standard (2)
  • Gold Galvanized/Standard (1)
  • Gray (2)
  • Green Colored (1)
  • Light (1)
  • Molded (3)
  • Molded;Electro Zinc (Locknut) (2)
  • Natural (17)
  • Nickel Plated (2)
  • NO FINISH (12)
  • Plain (1)
  • PLAIN (NO FINISH) (4)
  • Powder Coated (5)
  • PVC (Exterior Coating);Urethane (Interior Coating) (3)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • RED URETHANE COATED INTERIOR, GRAY PVC COATED EXTERIOR (7)
  • Silver (19)
  • Tin Plated (3)
  • Tinned (1)
  • Unfinished (3)
  • Unpainted (2)
  • Untreated (2)
  • white (1)
  • Zinc Coated (1)
  • Zinc Electro Plated (23)
  • Zinc Electroplate (3)
  • Zinc Electroplated (163)
  • Zinc Electro-Plated (12)
  • Zinc Electroplated With Chromate Coated (22)
  • Zinc Electroplated/Chromate Coating (50)
  • Zinc Electroplated;Chromate And Epoxy Powder Coat/Zinc Electroplate (1)
  • Zinc Plated (170)
  • Zinc Plating/Clear Chromate (8)
  • Show More...

• Size

  

  • 0.375 (4)
  • 0.5 (3)
  • 0.75 (5)
  • 1 (44)
  • 1 1/2 (10)
  • 1 1/2" (1)
  • 1 1/4 (13)
  • 1 in (18)
  • 1 INCH (26)
  • 1" (2)
  • 1.25 (2)
  • 1.27 Inch Width x 1.73 Inch Height (1)
  • 1.42 Inch H (1)
  • 1.46 Inch Height (3)
  • 1.46 Inch Width x 1.48 Inch Height (1)
  • 1.476 in x 1.087 in x 1.087 in (1)
  • 1.5 (3)
  • 1.64 Inch Height (3)
  • 1.64 Inch Width (2)
  • 1.67 Inch H (1)
  • 1.67 Inch Height (3)
  • 1.73 Inch Height (2)
  • 1.79 Inch Height (3)
  • 1.83 Inch Height (3)
  • 1.83 Inch Width (3)
  • 1.83 Inch Width x 1.98 Inch Height (1)
  • 1.92 Inch H (1)
  • 1.98 Inch Height (2)
  • 1/2 (51)
  • 1/2 in (35)
  • 1/2 INCH (29)
  • 1/2", 3/4" (1)
  • 1/2-14 (1)
  • 1-1/2 (22)
  • 1-1/2 in (17)
  • 1-1/2 INCH (15)
  • 1-1/4 (19)
  • 1-1/4 in (18)
  • 1-1/4 INCH (17)
  • 2 (34)
  • 2 1/2 (6)
  • 2 in (14)
  • 2 INCH (16)
  • 2 Inch Diameter (2)
  • 2 Inches (1)
  • 2.04 Inch Height (6)
  • 2.08 Inch Width (1)
  • 2.25 Inch Dia (1)
  • 2.25 Inch Diameter (4)
  • 2.27 Inch Height (1)
  • 2.27 Inch Width (3)
  • 2.27 Inch Width x 2.35 Inch Height (1)
  • 2.29 Inch Height (1)
  • 2.35 Inch Height (2)
  • 2.5 (3)
  • 2.5 Inch Dia (1)
  • 2.52 Inch Height (1)
  • 2.52 Inch Width (1)
  • 2.6 Inch H (1)
  • 2.6 Inch Height (3)
  • 2.82 Inch Height (4)
  • 2.83 Inch Height (2)
  • 2.83 Inch Width (1)
  • 2.83 Inch Width x 2.82 Inch Height (1)
  • 2.88 in x 2.21 in x 2.21 in (1)
  • 2-1/2 (13)
  • 2-1/2 in (10)
  • 2-1/2 Inch (7)
  • 3 (23)
  • 3 1/2 (6)
  • 3 in (13)
  • 3 INCH (10)
  • 3.08 Inch H (3)
  • 3.08 Inch Height (1)
  • 3.08 Inch Width (1)
  • 3.17 Inch H (1)
  • 3.17 Inch Height (1)
  • 3.25 in x 1.719 in x 2.9 in (1)
  • 3.25 INCH DIA (2)
  • 3.25 INCH DIA X 2.94 INCH L (1)
  • 3.5 (2)
  • 3.5 Inch Dia (2)
  • 3.6 Inch Height (4)
  • 3.83 Inch Height (2)
  • 3.83 Inch Width (1)
  • 3.83 Inch Width x 3.6 Inch Height (1)
  • 3/4 (58)
  • 3/4 in (30)
  • 3/4 INCH (26)
  • 3/4" (2)
  • 3/4-14 (1)
  • 3/8 (30)
  • 3/8 in (8)
  • 3/8 IN (1/2 KO) (1)
  • 3/8 IN Flex, 1/2 IN Hub (3)
  • 3/8 INCH (8)
  • 3/8" (2)
  • 3-1/2 (9)
  • 3-1/2 in (8)
  • 3-1/2 Inch (2)
  • 3-3/8 Inch W x 4-1/4 Inch H (1)
  • 4 (23)
  • 4 in (11)
  • 4 INCH (9)
  • 4.25 Inch Dia (2)
  • 4.25 INCH DIA X 3.75 INCH L (2)
  • 4.33 Inch H (3)
  • 4.71 Inch Width (1)
  • 4.75 Inch Dia (1)
  • 5.25 Inch Dia (1)
  • 5.33 Inch H (1)
  • 5.98 INCH L X 2.48 INCH W X 1.67 INCH H (1)
  • 6.25 Inch Dia (1)
  • 7/16 in (1)
  • 8 in (1)
  • F2 (1)
  • F3 (1)
  • L(0.860) x W(0.876) x H(0.876) (1)
  • L(0.972) x W(0.942) x H(0.919) (1)
  • L(1.010) x W(1.010) x H(0.492) (1)
  • L(1.090) x W(1.077) x H(1.077) (1)
  • L(1.200) x W(0.900) x H(1.187) (1)
  • L(1.228) x W(1.228) x H(1.410) (1)
  • L(1.270) x W(1.090) x H(1.090) (1)
  • L(1.310) x W(1.310) x H(2.221) (1)
  • L(1.410) x W(0.850) x H(0.850) (2)
  • L(1.410) x W(1.410) x H(1.545) (1)
  • L(1.420) x W(1.420) x H(2.376) (2)
  • L(1.470) x W(1.055) x H(1.055) (1)
  • L(1.473) x W(1.179) x H(0.840) (1)
  • L(1.473) x W(1.244) x H(0.840) (1)
  • L(1.497) x W(4.398) x H(1.836) (1)
  • L(1.510) x W(1.390) x H(1.390) (1)
  • L(1.526) x W(0.780) x H(0.780) (1)
  • L(1.542) x W(1.105) x H(1.105) (1)
  • L(1.545) x W(1.410) x H(1.410) (1)
  • L(1.556) x W(1.556) x H(1.555) (1)
  • L(1.594) x W(1.594) x H(1.546) (1)
  • L(1.600) x W(1.595) x H(1.595) (1)
  • L(1.648) x W(1.648) x H(0.683) (1)
  • L(1.664) x W(1.664) x H(2.425) (2)
  • L(1.750) x W(1.750) x H(1.810) (1)
  • L(1.772) x W(1.605) x H(0.840) (1)
  • L(1.800) x W(1.432) x H(0.750) (1)
  • L(1.820) x W(1.820) x H(2.237) (1)
  • L(1.890) x W(1.890) x H(2.530) (1)
  • L(1.930) x W(1.930) x H(1.975) (1)
  • L(2.012) x W(2.012) x H(2.085) (1)
  • L(2.075) x W(1.252) x H(1.000) (1)
  • L(2.110) x W(2.289) x H(2.289) (1)
  • L(2.110) x W(2.525) x H(2.525) (1)
  • L(2.140) x W(1.842) x H(1.085) (1)
  • L(2.154) x W(1.605) x H(0.950) (1)
  • L(2.156) x W(1.885) x H(2.575) (1)
  • L(2.190) x W(1.135) x H(1.409) (1)
  • L(2.200) x W(2.200) x H(2.990) (1)
  • L(2.210) x W(1.514) x H(0.840) (1)
  • L(2.242) x W(2.460) x H(2.460) (1)
  • L(2.305) x W(2.460) x H(2.460) (1)
  • L(2.324) x W(2.387) x H(1.945) (1)
  • L(2.331) x W(3.389) x H(3.389) (1)
  • L(2.428) x W(2.428) x H(2.293) (1)
  • L(2.466) x W(2.105) x H(3.093) (1)
  • L(2.467) x W(2.115) x H(0.950) (1)
  • L(2.489) x W(2.872) x H(2.872) (1)
  • L(2.496) x W(1.709) x H(1.300) (1)
  • L(2.496) x W(1.819) x H(0.854) (1)
  • L(2.682) x W(3.645) x H(3.645) (2)
  • L(2.700) x W(2.700) x H(2.175) (1)
  • L(2.758) x W(3.722) x H(3.722) (1)
  • L(2.840) x W(2.550) x H(2.550) (1)
  • L(2.874) x W(4.107) x H(4.107) (2)
  • L(2.901) x W(2.750) x H(3.700) (1)
  • L(3.054) x W(2.717) x H(1.200) (1)
  • L(3.055) x W(2.752) x H(1.135) (1)
  • L(3.218) x W(3.235) x H(4.250) (1)
  • L(3.281) x W(3.890) x H(5.000) (1)
  • L(3.360) x W(3.360) x H(2.400) (1)
  • L(3.500) x W(4.060) x H(4.060) (1)
  • L(3.680) x W(3.150) x H(3.150) (1)
  • L(4.470) x W(4.510) x H(4.510) (1)
  • L(4.650) x W(3.420) x H(3.420) (1)
  • L(4.850) x W(5.290) x H(5.290) (1)
  • L(7.069) x W(2.269) x H(1.255) (1)
  • Show More...

• Color

  

  • Beige (2)
  • Black (5)
  • Blue (4)
  • Bronze (1)
  • Gray (57)
  • Gray (Exterior Coating);Red (Interior Coating) (5)
  • Gray (Exterior);Red (Interior) (4)
  • Gray;Grey (1)
  • Green (5)
  • Grey (6)
  • Ivory (1)
  • MALLEABLE IRON (68)
  • Metallic (56)
  • Metallic Body/Green Nut (2)
  • Polished Silver (9)
  • Purple (3)
  • Red (3)
  • Silver (58)
  • Tin Plated Copper (3)
  • White (3)
  • Yellow (2)
  • Yellow (Handle) (1)
  • Show More...

• Model

  

  • 5000S (1)
  • 6000S (6)
  • BG (2)
  • C (1)
  • CGB (13)
  • CHB (10)
  • CPR (13)
  • EYD (1)
  • EYS (17)
  • FD (2)
  • FDC (1)
  • FS (2)
  • FSC (2)
  • GAR (1)
  • GUA (3)
  • GUAB (1)
  • GUAC (1)
  • GUAL (2)
  • GUAT (3)
  • GUAX (2)
  • HUB (6)
  • LBY (2)
  • NBBG-G Series (3)
  • PBGLL (1)
  • PR5 (8)
  • PRC (3)
  • PRHLL (1)
  • PRLB (2)
  • PRLL (3)
  • PRLR (4)
  • PRST (2)
  • PRTB (1)
  • PRUNF (1)
  • PRUNY (6)
  • PV (2)
  • Series PRC (2)
  • Series PRCPLG (2)
  • ST (3)
  • TC-500 (1)
  • UNF (2)
  • UNY (4)
  • YGIB (1)
  • Show More...

• Shape

  

  • Deep (5)
  • LB (1)
  • Round (12)
  • Shallow (4)
  • Straight (47)
  • T (2)
  • Show More...

• Body Type

  

  • Form 7 (1)
  • Form 8 (2)
  • Show More...

• Maximum Conductor Size

  

  • #4 (Solid);2/0 AWG (Stranded) (2)
  • 2/0 to 4/0 AWG (Solid);1/0 AWG to 250 kcmil (Stranded) (1)
  • Show More...

• Connection Type

  

  • Compression (9)
  • E-Z Lock(R) (2)
  • Female (3)
  • Female to Male (1)
  • FEMALE, FEMALE (9)
  • FMC (11)
  • Grip (4)
  • Liquidtight (6)
  • Liquid-Tight (6)
  • MALE, FEMALE (9)
  • NPT (26)
  • Screw (6)
  • Screw;Strap (10)
  • Screw-In (3)
  • Screw-On (3)
  • Set Screw (14)
  • Single Screw Strap-Type (2)
  • Snap-In (10)
  • Squeeze (16)
  • Straight (29)
  • Straight Male (13)
  • Straight Male NPT (2)
  • Threaded (102)
  • Threaded x Push In (6)
  • Threaded x Screw (2)
  • Threaded x Screw-In (13)
  • U Shaped (1)
  • Show More...

• Insulation Material

  

  • Aluminum (1)
  • Copper (1)
  • Silicon Bronze (8)
  • Show More...

• Conductor Material

  

  • Bronze (Bridge) / Paintable Plastic (Cover) (1)
  • Copper (4)
  • Copper/Aluminum (2)
  • Show More...

• Length

  

  • 0.84 in (1)
  • 0.872 in (1)
  • 0.94 in (1)
  • 1 in (8)
  • 1 in;25.4 mm (1)
  • 1.010 in (1)
  • 1.03 in (2)
  • 1.03 in;26.2 mm (1)
  • 1.032 in (1)
  • 1.06 (1)
  • 1.09 in;27.7 mm (1)
  • 1.12 in (1)
  • 1.13 in (2)
  • 1.20 in;30.5 mm (1)
  • 1.203 in (1)
  • 1.228 (1)
  • 1.25 (2)
  • 1.25 in (4)
  • 1.250 in (2)
  • 1.28 (1)
  • 1.31 (1)
  • 1.313 in (1)
  • 1.32 (1)
  • 1.34 in (3)
  • 1.365 in (1)
  • 1.390 in (1)
  • 1.41 (2)
  • 1.41 in (3)
  • 1.42 (1)
  • 1.425 in (1)
  • 1.43 in (3)
  • 1.44 in;36.6 mm (1)
  • 1.445 in (1)
  • 1.473 in (1)
  • 1.475 in (1)
  • 1.476 (2)
  • 1.48 in (2)
  • 1.5 in (1)
  • 1.5 in;38.1 mm (1)
  • 1.50 in;38.1 mm (1)
  • 1.500 in (1)
  • 1.530 in (2)
  • 1.54 in (2)
  • 1.56 in (4)
  • 1.563 in (3)
  • 1.594 (1)
  • 1.61 (1)
  • 1.62 (1)
  • 1.625 (1)
  • 1.625 in (2)
  • 1.63 in (3)
  • 1.63 in;41.4 mm (1)
  • 1.648 in (1)
  • 1.65 in (2)
  • 1.66 in;42.2 mm (1)
  • 1.660 in (2)
  • 1.664 (1)
  • 1.68 in (1)
  • 1.69 in (2)
  • 1.71 (1)
  • 1.75 in (1)
  • 1.75 INCH (2)
  • 1.750 in (1)
  • 1.772 in (2)
  • 1.8 (1)
  • 1.8 INCH (1)
  • 1.81 in (1)
  • 1.813 in (2)
  • 1.82 in (1)
  • 1.85 (1)
  • 1.888 in (1)
  • 1.89 in (1)
  • 1.9 (1)
  • 1.934 in (1)
  • 1.95 in (1)
  • 100 (2)
  • 11.64 (1)
  • 11/16 in (1)
  • 1-1/16 in (3)
  • 1-1/16 in;27 mm (1)
  • 1-1/2 in (5)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 1-13/16 in (1)
  • 1-13/32 (1)
  • 1-21/32 in;42.1 mm (3)
  • 1-25/32 in (3)
  • 1-27/32 in (4)
  • 1-3/4 in (9)
  • 1-3/8 in (3)
  • 1-31/32 (1)
  • 1-39/64 in (1)
  • 15/16 in (4)
  • 1-5/16 in (7)
  • 1-5/16 in;33.3 mm (1)
  • 1-5/8 (1)
  • 1-5/8 in (5)
  • 1-55/64 in (1)
  • 1-7/16 in (2)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (3)
  • 2 in (16)
  • 2 in;50.8 mm (1)
  • 2.05 (1)
  • 2.063 in (2)
  • 2.1 (1)
  • 2.11 (2)
  • 2.12 in (1)
  • 2.14 (1)
  • 2.15 (1)
  • 2.155 in (1)
  • 2.2 in (2)
  • 2.210 in (1)
  • 2.217 in (1)
  • 2.25 (1)
  • 2.25 in (1)
  • 2.25 in;57.2 mm (1)
  • 2.250 in (1)
  • 2.27 (1)
  • 2.27 in (2)
  • 2.28 in (1)
  • 2.3 (1)
  • 2.3 in (1)
  • 2.305 (1)
  • 2.31 in (1)
  • 2.324 (1)
  • 2.325 in (1)
  • 2.331 in (1)
  • 2.374 in (1)
  • 2.375 in (2)
  • 2.376 in (3)
  • 2.38 Inch (2)
  • 2.425 in (1)
  • 2.44 in (2)
  • 2.44 INCH (1)
  • 2.467 in (1)
  • 2.489 (1)
  • 2.5 in (2)
  • 2.50 in;63.5 mm (4)
  • 2.500 in (3)
  • 2.51 (1)
  • 2.53 in (1)
  • 2.55 in (1)
  • 2.56 in (2)
  • 2.59 in;65.8 mm (1)
  • 2.6 in (1)
  • 2.625 in (1)
  • 2.625 in (Gland) (1)
  • 2.682 (1)
  • 2.682 in (1)
  • 2.7 in (1)
  • 2.75 INCH (2)
  • 2.750 in (2)
  • 2.750 in (Gland) (1)
  • 2.758 (1)
  • 2.85 (1)
  • 2.874 (1)
  • 2.874 in (1)
  • 2.875 (2)
  • 2.875 in (1)
  • 2.88 (1)
  • 2.88 in (1)
  • 2.99 in (1)
  • 2-1/2 in (5)
  • 2-1/4 in (2)
  • 2-1/8 in (3)
  • 2-11/16 in (5)
  • 2-15/16 in (3)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/16 in (2)
  • 2-3/16 in;55.6 mm (1)
  • 2-3/32 in;53.2 mm (2)
  • 2-41/64 in (3)
  • 2-5/16 in (2)
  • 2-5/8 in (2)
  • 2-7/32 in (1)
  • 2-7/64 in (1)
  • 2-7/8 in (2)
  • 2-9/16 in (1)
  • 3 in (5)
  • 3.001 in (2)
  • 3.060 in (1)
  • 3.120 in (1)
  • 3.125 in (Gland) (1)
  • 3.13 in (1)
  • 3.15 in (1)
  • 3.187 in (1)
  • 3.19 INCH (2)
  • 3.24 in (1)
  • 3.25 in (2)
  • 3.38 INCH (1)
  • 3.406 in (1)
  • 3.438 in (1)
  • 3.56 Inch (2)
  • 3.600 in (1)
  • 3.63 (2)
  • 3.641 in (1)
  • 3.69 in;93.7 mm (1)
  • 3.69 INCH (1)
  • 3.75 INCH (2)
  • 3.938 in (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 3-1/2 in (2)
  • 3-1/4 in (2)
  • 3-1/4 in;82.6 mm (5)
  • 3-3/4 in (4)
  • 3-3/4 in;95.3 mm (3)
  • 3-3/8 in;85.7 mm (1)
  • 3-7/32 in (4)
  • 4 (2)
  • 4 in (3)
  • 4.125 in (1)
  • 4.25 (1)
  • 4.281 in (1)
  • 4.44 in (1)
  • 4.47 (1)
  • 4.5 (1)
  • 4.5 in (Gland) (1)
  • 4.500 in (1)
  • 4.724 (1)
  • 4.75 in;120.7 mm (1)
  • 4.75 INCH (2)
  • 4.92 (1)
  • 4.958 in (1)
  • 4-1/2 in (2)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/4 in (3)
  • 4-23/32 in (2)
  • 4-3/32 in (2)
  • 4-3/4 in (2)
  • 4-3/8 in (2)
  • 4-4 (1)
  • 5 (1)
  • 5.200 in (2)
  • 5.395 in (1)
  • 5.6 in (1)
  • 5.8 in (3)
  • 5.800 in (1)
  • 5/8 in (3)
  • 5-1/4 in (1)
  • 6 in (1)
  • 6.28 in (1)
  • 7.44 INCH (1)
  • 7.75 in (1)
  • 7/16 in (1)
  • 7/8 in (3)
  • 8.00 IN (1)
  • 8.28 (1)
  • 9/16 in (2)
  • Show More...

• Thread Length

  

  • 0.375 in (1)
  • 0.406 in (4)
  • 0.42 in (1)
  • 0.46 in (1)
  • 0.51 in (2)
  • 0.58 in (2)
  • 0.64 in (4)
  • 0.66 in (1)
  • 0.69 in (1)
  • 0.72 in (1)
  • 0.78 in (3)
  • 0.79 in (1)
  • 0.84 in (4)
  • 0.87 in (2)
  • 1 in (1)
  • 1.06 in (2)
  • 1/2 in (1)
  • 11/16 in (1)
  • 3/8 in (1)
  • 5/8 in (2)
  • 7/16 in (3)
  • 7/8 in (1)
  • 9/16 in (3)
  • Show More...

• Diameter

  

  • 0.406 in (1)
  • 0.460 to 0.610 in (Cable) (1)
  • 0.618 in (1)
  • 0.78 in (1)
  • 0.813 in (3)
  • 0.82 in (1)
  • 0.84 in;21.3 mm (1)
  • 0.90 in (1)
  • 0.91 in (1)
  • 0.94 in (1)
  • 0.97 in (1)
  • 0.975 in (4)
  • 1 in (5)
  • 1 in;25.4 mm (1)
  • 1.01 in (2)
  • 1.06 in (1)
  • 1.065 in (1)
  • 1.077 in (2)
  • 1.08 in;27.4 mm (1)
  • 1.093 INCH (1)
  • 1.125 in (1)
  • 1.19 in (3)
  • 1.220 in (2)
  • 1.23 in (4)
  • 1.244 in (1)
  • 1.25 in (4)
  • 1.25 in;31.8 mm (1)
  • 1.250 in (1)
  • 1.27 in (1)
  • 1.277 in (1)
  • 1.3 in (2)
  • 1.31 in (1)
  • 1.31 in;33.3 mm (1)
  • 1.312 in (1)
  • 1.38 in;35.1 mm (1)
  • 1.4 in (1)
  • 1.420 in (1)
  • 1.421 in (1)
  • 1.43 in (2)
  • 1.44 in (2)
  • 1.46 in (1)
  • 1.478 in (1)
  • 1.48 in (2)
  • 1.5 in;37.5 mm (1)
  • 1.5 in;38.1 mm (1)
  • 1.514 in (1)
  • 1.53 in (1)
  • 1.56 in (1)
  • 1.563 in (4)
  • 1.57 in (1)
  • 1.58 in (2)
  • 1.58 INCH (1)
  • 1.583 in (1)
  • 1.605 in (2)
  • 1.63 in;41.4 mm (1)
  • 1.648 in (1)
  • 1.656 in (2)
  • 1.66 in (1)
  • 1.664 in (1)
  • 1.69 in (1)
  • 1.69 in;42.9 mm (1)
  • 1.7 in (1)
  • 1.74 in (1)
  • 1.75 in (2)
  • 1.76 in (2)
  • 1.78 in (2)
  • 1.81 in;45.9 mm (1)
  • 1.813 in (2)
  • 1.820 in (1)
  • 1.878 in (1)
  • 1.88 in (1)
  • 1.89 in (1)
  • 1.89 INCH (1)
  • 1.890 in (1)
  • 1.925 in (1)
  • 1.94 in;49.3 mm (1)
  • 1.96 INCH (1)
  • 1-1/16 in (2)
  • 11/16 in;27 mm (1)
  • 1-1/2 in (5)
  • 1-1/32 in (4)
  • 1-1/4 in (1)
  • 1-1/8 in (8)
  • 1-11/16 in (4)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/32 in (2)
  • 1-15/16 in (4)
  • 1-17/32 in (5)
  • 1-17/32 in;44.45 mm (1)
  • 1-21/32 in;42.1 mm (3)
  • 1-29/32 in (1)
  • 1-29/32 in;48.42 mm (1)
  • 13/16 in (1)
  • 1-3/16 in (1)
  • 1-3/4 in (4)
  • 1-3/8 in (8)
  • 1-3/8 in;34.9 mm (5)
  • 15/16 in (3)
  • 1-5/16 in (5)
  • 15/16 in;23.8 mm (1)
  • 15/16 in;33.3 mm (1)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/8 in (1)
  • 1-57/64 in (1)
  • 1-7/16 in (5)
  • 1-7/32 in (3)
  • 1-7/32 in;30.96 mm (1)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (5)
  • 1-9/32 in (1)
  • 2 in (9)
  • 2 INCH (3)
  • 2.06 in (1)
  • 2.10 in (1)
  • 2.113 in (1)
  • 2.115 in (1)
  • 2.19 in (1)
  • 2.25 in (6)
  • 2.25 INCH (3)
  • 2.250 in (1)
  • 2.31 in;58.7 mm (1)
  • 2.34 in (1)
  • 2.38 in (2)
  • 2.38 in;60.5 mm (1)
  • 2.4 in (1)
  • 2.418 in (1)
  • 2.438 in (3)
  • 2.460 in (1)
  • 2.5 in (1)
  • 2.550 in (1)
  • 2.56 in (1)
  • 2.563 in (1)
  • 2.63 in;66.8 mm (1)
  • 2.67 in (1)
  • 2.69 in (1)
  • 2.7 in (1)
  • 2.75 in (1)
  • 2.75 INCH (3)
  • 2.83 INCH (1)
  • 2-1/16 in (1)
  • 2-1/2 in (1)
  • 2-1/4 in (2)
  • 2-1/8 in (1)
  • 2-11/16 in (2)
  • 2-15/16 in (1)
  • 2-23/32 in;69.1 mm (3)
  • 2-3/16 in (1)
  • 23/16 in;55.6 mm (1)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-3/4 in (1)
  • 2-3/8 in (4)
  • 2-35/64 in (1)
  • 2-5/16 in (1)
  • 2-5/32 in (3)
  • 2-5/8 in (5)
  • 2-7/16 in (1)
  • 2-9/16 in (2)
  • 3 in (5)
  • 3 INCH (2)
  • 3.15 in (1)
  • 3.150 in (1)
  • 3.19 in;81 mm (1)
  • 3.25 in (2)
  • 3.28 in (1)
  • 3.33 in (1)
  • 3.36 in (1)
  • 3.383 in (1)
  • 3.389 in (1)
  • 3.420 in (1)
  • 3.5 Inch (2)
  • 3.58 INCH (3)
  • 3.645 in (1)
  • 3.89 in (1)
  • 3.97 in (1)
  • 3/4 in (1)
  • 3-1/4 in (1)
  • 3-1/4 in;82.55 mm (1)
  • 31/4 in;82.6 mm (1)
  • 3-1/4 in;82.6 mm (5)
  • 3-1/8 in (1)
  • 31/8 in;79.4 mm (1)
  • 3-1/8 in;79.4 mm (1)
  • 3-11/16 in (2)
  • 3-15/16 in (1)
  • 3-3/16 in (2)
  • 3-3/4 in (2)
  • 3-3/64 in (1)
  • 3-3/8 in (3)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/16 in (1)
  • 3-7/16 in (2)
  • 3-7/8 in (1)
  • 3-9/16 in (1)
  • 4 in (2)
  • 4.107 in (1)
  • 4.188 in (2)
  • 4.25 in;108.0 mm (1)
  • 4.38 in (1)
  • 4.38 in;111.3 mm (1)
  • 4.5 INCH (2)
  • 4.77 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (2)
  • 4-1/2 in;114.3 mm (1)
  • 4-1/32 in (2)
  • 4-1/8 in (1)
  • 4-13/16 in (3)
  • 4-25/32 in (1)
  • 4-3/16 in (1)
  • 4-3/8 in (1)
  • 4-5/16 in (2)
  • 4-7/16 in (1)
  • 4-7/8 in (1)
  • 5 in (3)
  • 5.14 INCH (1)
  • 5.47 in (1)
  • 5.750 in (1)
  • 5.83 INCH (4)
  • 5-1/2 in (1)
  • 5-1/2 in;139.7 mm (1)
  • 5-1/8 in (3)
  • 5-23/64 in (1)
  • 5-3/8 in (1)
  • 7/8 in (2)
  • Show More...

• For Use With

  

  • (2) 0.405 to 0.612 in Cable (1)
  • (2) 0.485 to 0.612 in Cable (1)
  • 0.405 to .610 AC90, ACG90 Cable;Flexible Metal Conduit (1)
  • 0.405 to 0.610 in Steel and Aluminum:MC/HCF/AC NEW MC-PCS MC-PCS HCF, MCI-A, AC90, ACG90 (1)
  • 0.45 to 0.612 in Cable (1)
  • 0.485 to 0.612 in Cable (1)
  • 0.590 to 0.780 in MC/HCF/AC/MC-PCS Cable;0.610 to 0.780 in MCI-A Cable;0.650 to 0.850 in AC90, ACG90 Cable (1)
  • 14/2 to 10/3 AWG (0.40 in to 0.63 in) Aluminum and Steel AC/MC/MCI-A/HCF;3/8 in Aluminum and Steel FMC/RWFMC (1)
  • AC/MC Cable (9)
  • AC/MC/HCF Cable 10/4 AWG(0.61 in) to 8/3 AWG (0.87 in) (1)
  • AC/MC/MCI-A 14/2 AWG (0.375 in) to 10/3 AWG (0.625 in) HCF/HCFMCI-A 3/8 in FMC and 14/2 to 10/3 AWG NM Cable (1)
  • AC/MC/MCI-A/HCF/HCFMCI-A/FMC .40-.62 Cable to Box/Enclosure (1)
  • Aluminum and Steel Flex, AC, AC90, MCI, MCI-A Cable (1)
  • Aluminum and Steel Flex, AC, AC90, MCI, MCI-A Cable;HCF Steel and Aluminum Cable (4)
  • Aluminum or Steel Electrical Metallic Tubing (1)
  • Box;Enclosure (1)
  • Connect AC/MC/MCI-A/NM-B Cable to Box or Enclosure;12/2 AWG(0.44 in) to 10/3 AWG (0.53 in) For use with HCF/HCFMCI-A (1)
  • Connect MC &AC or 3/8 in Flexible Metal Conduit to box or enclosure;14/2 AWG (0.38 in) to 10/3 AWG (0.61 in)AC/MC/MCI-A/HCF/HCFMCIA (1)
  • Connect Rigid and IMC Conduit to a Threadless Opening in an Enclosure (6)
  • Connect Single Round Service Entrance Cable to Box or Enclosure (5)
  • Connecting & Bonding Electrical Metallic Tubing to A Box Or Enclosure (1)
  • Connecting 14/2 AWG (0.38 in) to 10/3 (.53 in) Armored;Metal Clad Cable to Box or Enclosure MC/MCI-A/HCFMCI-A (1)
  • Connecting 14/2 to 10/3 Aluminum or Steel AC/MC Cable or 3/8” Flexible Metal Conduit to a Box/Enclosure. Patent Pending (2)
  • Connecting EMT to Box or Enclosure (6)
  • Connecting Nonmetallic Cable to Box or Enclosure (5)
  • Dry Locations;Concrete Tight when Taped (1)
  • EMT Conduit (84)
  • EMT Conduit;Boxes and Enclosures (24)
  • EMT Conduit;Combination Head Receptacle;Switch and Panel Screws (1)
  • EMT Conduit;IMC Conduit;Rigid Conduit (6)
  • EMT Raceways to Boxes and Enclosures (2)
  • EMT to Box or Enclosure (7)
  • EMT;IMC;Rigid Conduit (1)
  • Flexible Cords Including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO, Tray Cable Types TC, TC-ER, TC-ER-HLA, ITC, ITC-ER, ITC-HL, PLTC and PLTC-ER Cables Steel/Copper Wire Braided Cable Steel Wire Armoured (13)
  • Flexible Metal Conduit (14)
  • Flexible Metal Conduit;12/3 to 10/3 steel or aluminum MC cable (2)
  • For Insulated Cable (2)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • General Control and Power Cable Applications (2)
  • Ground;Concrete (1)
  • Grounding Wire (5)
  • Intersystem Bonding Termination (1)
  • Join EMT to Box or Enclosure (6)
  • Kind or F Channels (2)
  • Liquid Tight Flexible Metal Conduit (19)
  • Liquidtight Conduit (6)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (2)
  • Liquidtight Flexible Metallic Conduit (30)
  • Liquid-Tight Flexible Metallic Conduit (31)
  • Liquidtight Flexible Non-Metallic Conduit (1)
  • Liquidtight Flexible Non-Metallic Conduit Type A (5)
  • Metal-Clad Cable (3)
  • Metal-Clad Cable;Non-Armoured and Tray Cable (1)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic Rigid and IMC Conduit (13)
  • NM Cable (2)
  • Non-Metallic "type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut (1)
  • Non-Metallic Liquid-Tight Conduit (7)
  • Non-Metallic Liquid-Tight Conduit, Type B Only (4)
  • Nonmetallic Type B Liquid Tight Conduit (2)
  • Oval Service Entrance Cable;Nonmetallic Sheathed Cable (1)
  • Portable Cord (6)
  • Power and Communication Grounding Systems (1)
  • Rigid and IMC Conduit (10)
  • Rigid and IMC Conduit;Box or Enclosure (4)
  • Rigid Conduit (13)
  • Rigid Metal Conduit (3)
  • Secure Emt to Box or Enclosure (9)
  • Secure Steel EMT to Box or Enclosure;Concrete-Tight when Taped (6)
  • Squeeze Connectors Will Fit Every Size of Armored Cable, Leaded Cable and Flexible Conduit;Armored Cable and Flexible Metal Conduit (1)
  • Steel or Aluminum EMT Conduit (1)
  • Steel;Aluminum EMT (3)
  • Steel;Aluminum Rigid Conduit (2)
  • Terminate Service Conduit to Cabinet (1)
  • Threaded Conduit (1)
  • To Join EMT to Box or Enclosure (29)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (4)
  • Used to Connect Non-Metallic Cable to Box or Enclosure (2)
  • Used to Join Steel Emt to Box or Enclosure;Concrete-Tight 1/2 in Thru 2 in Suitable for use with Steel or Aluminum Emt (9)
  • Show More...

• Enclosure Type

  

  • Class I Div 2, Class II Div 1 and 2, Class III (2)
  • Class I Div 2, Class II Div 1 and 2, Class III Div 1 and 2 (10)
  • Class I Div 2;NEMA 3R (4)
  • Class I Div 2;NEMA 3R;NEMA 4;NEMA 4X (9)
  • Nema 4 (5)
  • NEMA 6 and 4X (4)
  • NEMA FB-1 (8)
  • Steel (1)
  • Type 4X (3)
  • Show More...

• Connection Size

  

  • 1 in (3)
  • 1/2 in (3)
  • 1-1/2 in (3)
  • 1-1/4 in (3)
  • 2 in (3)
  • 2-1/2 in (3)
  • 3 in (3)
  • 3/4 in (3)
  • 3-1/2 in (1)
  • 4 in (3)
  • Show More...

• Special Features

  

  • 0.38 IN Dia X 1.3 IN Length, For Flexible Metal Conduit (1)
  • 0.4IN Dia End Stop, For 0.225 To 0.612IN Cable (1)
  • 0.83 IN Dia X 1.63 IN Length, For Flexible Metal Conduit (1)
  • 1 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.19 IN, Max. Dia. 1.31 IN,Thread Length 0.44 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 1 1/2 IN Knockout (1)
  • 1 1/2 Pipe Size IN (2)
  • 1 1/32 IN Dia X 1 1/4 IN Length, 7/16 IN Thread Length, Concretetight (1)
  • 1 IN Compression Coupling, Made in USA, Concretetight, Raintight (wet locations) Canada (1)
  • 1.06 IN Dia X 1.5 IN Length, 0.48 IN Thread Length, Flexible Metal Conduit (1)
  • 1.11 In Diameter X 0.54 In Length (1)
  • 1.28 IN Dia X 1.49 IN Length, 0.53 IN Thread Length, For Liquidtight Flexible Metal Conduit and Type B Non-Metallic Conduit, Liquidtight/Raintight/Oiltight (1)
  • 1.46IN OD Cable, 1.37IN OD Wire Bundle (1)
  • 1.77IN OD Cable, 1.59IN OD Wire Bundle (1)
  • 1/2 Ground Rod Clamp - Stainless Steel Hardware In (1)
  • 1/2 IN Knockout (4)
  • 1/2" Knockout Saddle-Type Connector with Spring Set Screw;Concrete Tight when Taped (4)
  • 1/2" Knockout Saddle-Type Duplex Cable Connector;Concrete Tight when Taped (1)
  • 10 Replacement Sleeves Per Bag (3)
  • 1-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.94 IN, Max. Dia. 1.94 IN,Thread Length 0.56 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 1-1/2 IN Trade Size Hub, Hole Dia. Min 1.92 IN, Hole Dia. Max 2.02 IN, Panel Thickness Min. 0.06 IN, Panel Thickness Max. 0.25 IN, Insulated Throat (1)
  • 1-1/4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.75 IN, Max. Dia. 1.69 IN,Thread Length 0.56 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 1-1/4 IN Trade Size Hub, Hole Dia. Min 1.67 IN, Hole Dia. Max 1.77 IN, Panel Thickness Min. 0.03 IN, Panel Thickness Max. 0.25 IN, Insulated Throat (1)
  • 14/2 to 10/3 (.40"-.63") Aluminum and Steel AC/MC/MCI-A/HCF (1)
  • 2 3/8 IN Dia X 3 11/32 IN Length, 7/8 IN Thread Length, Concretetight (1)
  • 2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.19 IN, Max. Dia. 2.38 IN,Thread Length 0.63 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 2.15 IN Length X 2.4 IN Height, 0.53 IN Thread Length, For Liquidtight Flexible Metal Conduit and Type B Non-Metallic Conduit, Liquidtight/Raintight/Oiltight (1)
  • 2.29IN OD Cable, 2.05IN OD Wire Bundle (1)
  • 2.52 IN Dia X 2.09 IN Length, 0.71 IN Thread Length, Flexible Metal Conduit (1)
  • 2.7IN OD Cable, 2.4IN OD Wire Bundle (1)
  • 2-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.38 IN, Max. Dia. 3.13 IN,Thread Length 0.88 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 2-1/2 IN Trade Size Hub, Hole Dia. Min 2.86 IN, Hole Dia. Max 3.00 IN, Panel Thickness Min. 0.06 IN, Panel Thickness Max. 0.31 IN, Insulated Throat (1)
  • 2-6 AWG - Indoor or Outdoor Use For Power Communication With Cover (1)
  • 3 3/16 IN Dia X 5 1/16 IN Length, 1 IN Thread Length, Concretetight (1)
  • 3 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.88 IN, Max. Dia. 3.75 IN,Thread Length 0.88 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 3.3IN OD Cable, 3IN OD Wire Bundle (1)
  • 3/4 Ground Rod Clamp - Stainless Steel Hardware (1)
  • 3/4 IN Knockout (1)
  • 3/8;1/2;5/8;3/4 Ground Rod Clamp - 3/8;1/2;5/8 Rebar Size - Stainless Steel Hardware In (1)
  • 3-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 3.00 IN, Max. Dia. 4.25 IN,Thread Length 1.00 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 3.19 IN, Max. Dia. 4.75 IN,Thread Length 1.00 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 4.81 In Diameter X 1.15 In Length (1)
  • 4Q fittings have plain throat (non-insulated);Bonding wedge locknuts are recommended in hazardous locations;Compact, slim diameter with small turning radius;Furnished with locknut and knockout sealing ring;Hot dip or mechanically galvanized finish optionally available;Inspection windows in ferrule to ensure full en;Intrinsically safe;Liquidtight/raintight/oiltight/concretetight;Long ferrule prevents pullout and tight bend conduit pop-out;O-Z/Gedney fittings are used with liquidtight flexible metal conduit (3)
  • 5/8 Ground Rod Clamp - Stainless Steel Hardware In (1)
  • 5/8 to 3/4 in Rod - 3/8 in Pipe Size (2)
  • 90 Degree MC Cable Connector with Insulated Throat (1)
  • Armoured/Non-Armoured Barrier Gland (2)
  • Bring power, data, and A/V services into open spaceenvironments quickly & easily. Custom capabilities. On-site configurability. A/V Compatibility. Datacom connectivity options. (1)
  • Cable Opening Size 1-21/32 In, Weight 42 Lb per 100 (1)
  • Cable Opening Size 15/16 In, Weight 14 Lb per 100 (1)
  • Cable Opening Size 1-7/8 In, Weight 77 Lb per 100 (1)
  • Cable Opening Size 2-1/2 In, Weight 100 Lb per 100 (1)
  • Cable Opening Size 2-7/8 In, Weight 160 Lb per 100 (1)
  • Cable Opening Size 3-9/16 In, Weight 221 Lb per 100 (1)
  • Cable Opening Size 4-19/32 In, Weight 1460 Lb per 100 (1)
  • Cable Opening Size 4-19/32 In, Weight 610 Lb per 100 (1)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (5)
  • Clamp Type Connector (2)
  • Clear Plastisol covered AL6061-T6 aluminum body, Clear Plastisol (2)
  • Comes with Cover (1)
  • Compact design with small turning radius;Copperfree (4/10 of 1 PCT of copper or less) aluminum;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;Full, machined tapered threads (NPT);High corrosion resistance;Machine tool building, motor and transformer terminations, robotics assembly, air conditioning equipment installation and other applications that require flexibility and protection against entry of liquids, vapors or solids;Seals out (5)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Steel compression nut;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (3)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (10)
  • Concrete Tight (45)
  • Concrete tight when taped (7)
  • Concrete Tight, 1/2 IN Knockout (1)
  • Concrete Tight, 3/4IN Knockout, 1.555IN Length X (1)
  • Concrete Tight;Threadless (13)
  • Concretetight (17)
  • Concrete-Tight (69)
  • Concrete-tight when taped (4)
  • Concretetight When Taped (6)
  • Concretetight;Raintight (6)
  • Concrete-Tight;Raintight (62)
  • Connector provides a smooth, gradual radius bend (2)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (11)
  • Constructional Feature Concrete Tight Seal Against Oil, Water, Dirt and Chemical (1)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (5)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (50)
  • Copper Lay-In Lug Direct Burial - 4-14 AWG (1)
  • Corrosion Resistant;Multiweave Grip Gives Cable Arc-Of-Bend Control;Easy Cable/Flexible Conduit Installation (2)
  • Corrosion Resistant;Thinner and Lighter Weight Construction (10)
  • Duplex (1)
  • Ease of assembly and disassembly of STNM connectors permits make-up of harnesses in advance for fast, simple connections during production line assemblies;Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals;It cannot bend or twist the conduit and thereby protects wiring;The nut rides only on the sleeve and not on the conduit;The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wal (10)
  • Easy installation - No tools needed;Save time and money;Removable with a screwdriver (2)
  • Easy Installation;Removal, Reusable (2)
  • Easy Installation;Removal;Reusable (1)
  • Easy, Push-In Installation (2)
  • Eliminate Conduit Threading (10)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • Excellent Corrosion Resistance (1)
  • Extended Range with Superior Strain Relief;Reduced Overall Size, Fits Into tighter Spaces;Gland Nut Designed to Restrict Cable Bending (2)
  • External spring steel locking tabs secures connector to electrical box. (1)
  • Extra Long (1") Threads, perfect for use with Solar combiner boxes that have increased wall thicknesses. (1)
  • Fast and Easy Installation (2)
  • Features: An Irreversable Compression Ground Grid Cross Connector Which Allows Adjustment Of The Compression Elements Prior To Installation, Only Six Connectors And Four Dies Are Required To Install All Combinations From #6 AWG Solid Through 500 KCMIL, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Conductor Type: Run: Commercial Stranded Copper, Conductor Size (tap Range): 6 - 2 AWG, Tools, Die Set Catalog Number, And (number Of Crimps) (1)
  • Features: An Irreversible Compression Ground Grid Cross Connector Which Allows Adjustment Of The Compression Elements Prior To Installation, Only Six Connectors And Four Dies Are Required To Install All Combinations From 6 AWG Solid Through 500 KCMIL, UL467 Listed Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Dimensions In Brackets Represent Lightning Protection Conductors, Die Index: 997 Element A, 997 Element B, Conductor Type: Run: Commercial Stra (2)
  • Features: High Copper Alloy Ground Connector For Cross Connecting A Wide Range Of Cable, The High Copper Alloy Cast Body, DURIUM U-Bolts, Nuts, And Lockwashers Make The GX Suitable For Burial In Soil Or Concrete, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Installation Torque: 240 IN-LB, Length: 1-7/8 IN, Height: 2-3/4 IN, Width: 1-7/8 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GB Separates Cable From Bar, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GB And GBM Suitable For Direct Burial In Concrete Or Ground, Width: 1-1/2 IN, Installation Torque: 240 IN-LB, Height: 2 IN, Bar Thickness: 1/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GB Separates Cable From Bar, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GB And GBM Suitable For Direct Burial In Concrete Or Ground, Width: 1-1/4 IN, Installation Torque: 240 IN-LB, Bar Thickness: 1/4 IN, Height: 1-1/2 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GB Separates Cable From Bar, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GB And GBM Suitable For Direct Burial In Concrete Or Ground, Width: 2 IN, Installation Torque: 480 IN-LB, Height: 2 IN, Bar Thickness: 1/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GB Separates Cable From Bar, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GB And GBM Suitable For Direct Burial In Concrete Or Ground, Width: 2-3/8 IN, Installation Torque: 480 IN-LB, Height: 3 IN, Bar Thickness: 1/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GBM Clamps Cable Directly On Bar Surface, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GBM Suitable For Direct Burial In Concrete Or Ground, Installation Torque: 240 IN-LB, Width: 1-1/2 IN, Bar Thickness: 1/4 IN, Height: 1-1/2 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GBM Clamps Cable Directly On Bar Surface, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GBM Suitable For Direct Burial In Concrete Or Ground, Installation Torque: 480 IN-LB, Width: 2 IN, Height: 2 IN, Bar Thickness: 1/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable To 1/4 IN Thick Bar, Type GBM Clamps Cable Directly On Bar Surface, One-Wrench Installation, UL467 Listed, The High Copper Alloy Cast Body And DURIUM Bolts, Nuts, And Lockwashers Make The GBM Suitable For Direct Burial In Concrete Or Ground, Installation Torque: 480 IN-LB, Width: 2-3/8 IN, Height: 2-1/4 IN, Bar Thickness: 1/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 1/2 IN, Tube (ips) Size: 1/4 IN, Installation Torque: 240 IN-LB, Width: 1-7/8 IN, Height: 2-1/2 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 1-5/8 - 1-7/8 IN, Tube (ips) Size: 1-1/2 IN, Height: 4 IN, Installation Torque: 240 IN-LB, Width: 3-1/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2 - 2-3/8 IN, Tube (ips) Size: 2 IN, Height: 4-1/2 IN, Width: 3-3/4 IN, Installation Torque: 240 IN-LB (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 4 - 4-1/2 IN, Tube (ips) Size: 4 IN, Installation Torque: 240 IN-LB, Height: 6-3/8 IN, Width: 5-7/8 IN (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Height: 3-1/2 IN, Ground Rod Size: 1-3/8 - 1-1/2 IN, Tube (ips) Size: 1-1/4 IN, Installation Torque: 240 IN-LB, Width: 3 IN, Rebar (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Tube (ips) Size: 3 IN, Ground Rod Size: 3 - 3-1/2 IN, Installation Torque: 240 IN-LB, Height: 5-5/8 IN, Width: 4-3/4 IN (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Wire To Rebar, Fence Post Grounding Connector, Wire To Pipe, Ground Rod Size: 7/8 - 1 IN Outer-Diameter, Tube (ips) Size: 1/2 - 3/ (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Parallel Cables Perpendicular To Rod, Pipe Or Column, Also Used With One Groove For Run, The Other For Tap To Equipment, High Copper Alloy Cast Body And DURIUM U-Bolts, Nuts, And Lockwashers Make The GP Suitable For Direct Burial In The Ground Or Concrete, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Ground Rod Size: 5/8 - 3/4 IN, Tube (ips) Size: 3/8 IN, Width: 2-1/8 IN, Installation Torque: 24 (1)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Two Parallel Cables To Rod Or Pipe, Especially Good For Grounding Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts, And Lockwashers Make The GD Suitable For Burial In Ground Or Concrete, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Raised Floor: No, Ground Rod Size: 2 - 2-3/8 IN, Tube (ips) Size: 2 IN, Width: 3-3/4 IN, Installation Torque: 240 IN-LB, Height: 4-3/8 IN (2)
  • Features: High Copper Alloy Ground Connector For Joining Three Equal Cables To Rod Or Tube, Cable Grooves Take A Wide Range Of Cable, High Copper Alloy Cast Body And DURIUM U-Bolts, Nuts, And Lockwashers Make The GK Suitable For Direct Burial In Soil Or Concrete, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Ground Rod Size: 5/8 - 3/4 IN, Tube (ips) Size: 3/8 IN, Width: 3-1/2 IN, Height: 2-7/8 IN, Installation Torque: 480 IN-LB (1)
  • Features: High Copper Alloy Ground Connector For Joining Three Equal Cables To Rod Or Tube, Cable Grooves Take A Wide Range Of Cable, High Copper Alloy Cast Body And DURIUM U-Bolts, Nuts, And Lockwashers Make The GK Suitable For Direct Burial In Soil Or Concrete, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Tube (ips) Size: 3/8 IN, Ground Rod Size: 5/8 - 3/4 IN, Width: 3 IN, Installation Torque: 240 IN-LB, Height: 2-7/8 IN (1)
  • Features: High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, UL467 Listed, Provides Quality Assurance To Recognized Industry (1)
  • Features: Irreversible Compression Ground Tap Figure 6 Can Be Used As A Tap Connector Or As A Tap Splice Connector, Four Die Sets And Eight Connectors Can Accommodate A Conductor Range From #8 AWG Solid Through 500 KCMIL Plus 1/2 , 5/8 And 3/4 IN Copper Bonded Ground Rods, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Die Index: 1011 Element A, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y750 Tool, U1011 Die, (3), PA (1)
  • Features: Irreversible Compression Ground Tap Figure 6 Can Be Used As A Tap Connector Or As A Tap Splice Connector, Four Die Sets And Eight Connectors Can Accommodate A Conductor Range From #8 AWG Solid Through 500 KCMIL Plus 1/2 , 5/8 And 3/4 IN Copper Bonded Ground Rods, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Rebar Size: #5 - #6, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y750 Tool, PU998 Die, (1), PAT750-1 (1)
  • Features: Irreversible Compression Ground Tap Figure 6 Can Be Used As A Tap Connector Or As A Tap Splice Connector, Four Die Sets And Eight Connectors Can Accommodate A Conductor Range From #8 AWG Solid Through 500 KCMIL Plus 1/2 , 5/8 And 3/4 IN Copper Bonded Ground Rods, UL467 Listed, Acceptable For Direct Burial In Earth And Concrete, Prefilled With PENETROX Compound And Strip Sealed, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y750, PAT750-18V Tool, PU998 Die, (1), Y45 Tool, PU998 D (2)
  • Features: Irreversible Compression Ground Tap Figure C Connectors, Accommodates All Cable Combinations From #6 AWG Solid Through 500 KCMIL, C- Shaped Opening Permits Placing Two Continuous Parallel Cables Into Conductor Groove, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Prefilled With PENETROX Compound And Strip Sealed, Certain Sizes Are Also UL467 Listed And CSA Certified For Wire To Ground Rod, Conductor Size (tap - Mm): 10 - 70 SQ-MM, Die Index: 1011 Element A, Conductor Size (run (1)
  • Features: Irreversible Compression Ground Tap Figure C Connectors, Accommodates All Cable Combinations From #6 AWG Solid Through 500 KCMIL, C- Shaped Opening Permits Placing Two Continuous Parallel Cables Into Conductor Groove, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Prefilled With PENETROX Compound And Strip Sealed, Certain Sizes Are Also UL467 Listed And CSA Certified For Wire To Ground Rod, Conductor Size (tap - Mm): 95 - 120 SQ-MM, Die Index: 1011 Element A, Tools, Die Set Cata (1)
  • Features: Irreversible Compression Ground Tap Figure C Connectors, Accommodates All Cable Combinations From #6 AWG Solid Through 500 KCMIL, C- Shaped Opening Permits Placing Two Continuous Parallel Cables Into Conductor Groove, UL467 Listed, Acceptable For Direct Burial In Earth Or Concrete, Prefilled With PENETROX Compound And Strip Sealed, Certain Sizes Are Also UL467 Listed And CSA Certified For Wire To Ground Rod, Tools, Die Set Catalog Number, And (number Of Crimps): HYPRESS: Y35, Y39, Y750, PAT750 To (3)
  • Features: Non Insulated, For Rigid Conduit (3)
  • Features: SERVIT POST Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar, One-Wrench Installation, Conductor Type: Run: Commercial Stranded Copper, Commercial Solid Copper, Cross Flats: 5/8, 7/16 IN, Stud Size: 1/4-20, Dimension B: 3/8 IN, Height: 1-1/2 IN (1)
  • Features: SERVIT POST Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar, One-Wrench Installation, Cross Flats: 11/16, 1/2 IN, Conductor Type: Run: Commercial Stranded Copper, Commercial Solid Copper, Height: 1-3/4 IN, Stud Size: 5/16-18, Dimension B: 13/32 IN (1)
  • Features: SERVIT POST Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar, One-Wrench Installation, For 1 Conductor, Conductor Type: Run: Commercial Stranded Copper, Commercial Solid Copper, Stud/bolt Size: 3/8-16 Diameter, 15/32 IN Length, Height: 1-5/8 IN, Cross Flats: 13/16, 5/8 IN (1)
  • Features: SERVIT POST Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar, One-Wrench Installation, For 1 Conductor, Conductor Type: Run: Commercial Stranded Copper, Commercial Solid Copper, Stud/bolt Size: 3/8-16 Diameter, 15/32 IN Length, Height: 1-5/8 IN, Cross Flats: 3/4, 5/8 IN (1)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • For 0.46 to 0.585 in Diameter Cable (1)
  • For use in Wet Locations in Canada Only (9)
  • Free Fitting Threads Ensure Easy Assembly (3)
  • Furnished with 2-way Phillips/Slotted Head Screw (26)
  • Furnished with Locknut (1)
  • Furnished with locknut; Male hub threads-NPS (2)
  • Furnished with Tri-Drive screw (8)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (13)
  • Furnished with Tri-Drive Slotted/Phillips/Robertson Screw (5)
  • Galv-Krom finish provides superior corrosion protection (1)
  • Gangable. When used with conduit, it provides protection against damage and theft of themain ground., Main ground conductor is isolated from communications lines., Incorporates six (6) terminating points (2x the amount required by the NEC)., Eliminates creating holes in building that could allow ingress of water., Mounts to enclosures, conduit bodies, and inline with conduit. (1)
  • Hand Wire Connector Driver (1)
  • HCF (4)
  • Hcf/Hcfmci-A (8)
  • heavy duty locknut;patented split gland-ring assures perfect seal and quick installation;reusable components;sealing washer included;Zinc electro plated (1)
  • Hubs & Accessories (7)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (6)
  • Install by Snapping Cable into Place, then Snapping Connector into the Box;No Tools Required (1)
  • Install from outside or inside outlet box or enclosure. (2)
  • Insulated Throat (2)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 °C (5)
  • Insulator Rated 105 degree C (2)
  • Integral internal spring steel locking tabs fasten cable or conduit. Suitable for maintaining grounding continuity when installed in accordance with NEC. (3)
  • Interconnects and Terminates Grounding Conductors From Telephone;Catv;Radio and Tv Antennas (1)
  • K.O. Size 1" (1)
  • K.O. Size 1/2" (2)
  • K.O. Size 1-1/2" (1)
  • K.O. Size 1-1/4" (1)
  • K.O. Size 2" (1)
  • K.O. Size 2-1/2" (1)
  • K.O. Size 3" (1)
  • K.O. Size 3/4" (1)
  • K.O. Size 3-1/2" (1)
  • K.O. Size 4" (1)
  • Large Cable Clamping Range;Liquid Tight Mechanical Grip;Full Length Busing Seal Protects Cable;Extended Pull Out Performance;Corrosion Resistant (3)
  • Liquid Tight and Water Tight Protection (6)
  • Listed for use with AC / AC90 / ACG90 / MC / MCI-A / HCFMCI-A / MC-PCS Cable*. cETLus Listed. (4)
  • Low Profile (1)
  • Low-profile, unobtrusive appearance. Blends with any dTcor or setting. ScuffCoat finish, tough, durable, scratch-resistant can be overpainted with latex paint. Fittings have removable covers which allow easy access to wiring for changes and additions. (1)
  • Maximum Volume for Bends within a Compact Overall Size (1)
  • Mounts easily on walls, modular furniture, under raisedfloors, or over ceiling, speeds installation: providesflexibility to bring wiring to points of use. Removable cover, provides access to wiring. (2)
  • Non-Armored Gland (1)
  • Non-Armored Gland, Cord Size 0.125 To 0.250 In (3)
  • Non-Armored Gland, Cord Size 0.250 To 0.375 In (1)
  • Non-Armored Gland, Cord Size 0.875 To 1.000 In (3)
  • Non-Armored Gland, Cord Size 1.000 To 1.188 In (1)
  • Non-Armored Gland, Cord Size 1.875 To 2.188 In (1)
  • Non-Armored Gland, Cord Size 2.188 To 2.500 In (1)
  • Non-Armored Gland, With Sealing Gasket, Cord Size 1.000 To 1.188 In (2)
  • ONE-SHOT,CABLE TO GRD ROD ,VERT TEE HORZ THRU (1)
  • ONE-SHOT,CABLE TO GRD ROD,HORZ TEE W/PARALLEL CABL (1)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • O-Ring Gasket;Grounding Lug (2)
  • Plain Finish (7)
  • Plastic Cover Snaps on and Provides Protection and an Easy and Aesthetically Pleasing Installation. (1)
  • Plastic Insulator Rated 105 Degree C (6)
  • Provide strain relief to protect the cord or cable;UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub;Watertight/oiltight (1)
  • provides a concrete tight connection when taped;tri-head screws;zinc electro plated (6)
  • provides a concrete tight connection when taped;UL listed for use with Rigid/IMC conduit;zinc electro plated (3)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (23)
  • Push-On Installation;No Tools (17)
  • Quick Install (1)
  • Quick Install E-Z Lock (2)
  • Raintight (16)
  • Raintight/Concrete-Tight (2)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, & Common Solvents;Lower Installed Cost;Flammability Classification 94V-2;Temperature Index 125° C (6)
  • Resists Salt Water, Weak Acids, Gasoline, Alcohol, Oil, Grease, and Common Solvents;Lower Installed Cost;Molded of Type Nylon 6. Flammability Classification 94v-2:Temperature Index 125°C (6)
  • Retangular Opening (1)
  • Reusable;Easy tool-Free Installation (1)
  • Rugged metallic construction (1)
  • Rugged, Durable Construction Protects Cords and Cables from Damage and Compact Design;Weatherproof Seal on Outer Sheath of Cable (13)
  • Screwdriver Leverage Hole In Head to Provide Extra Torque (1)
  • Sealing Ring and Groove with Innovative Profile Better Than Standard O-Ring (10)
  • Sealing Sleeves an All Conduit Openings;Cover Uses Retained Stainless Screw and Wedge Clip Design (1)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (2)
  • Sealing Sleeves on All Conduit Openings;Superior Corrosion Protection (2)
  • Sealing Sleeves on Both Ends;Molded External Ribs On 1/2" - 4" to Prevent Tool Damage During Assembly;Couplings are Straight Tapped (4)
  • Single Screw Connector (1)
  • Steel Raceway, Compact low profile design, Full range of fittings, one and two - gang device boxes. (1)
  • Straight (2)
  • Strain relief grips (5)
  • Sturdy Cable Sealing Mechanism Which Results in Superior Strain Relief (1)
  • Sunlight Resistant;Connectors Simply Screw Onto Cable;No Tools Required (1)
  • Tapered (NPT) Threads (1)
  • Tapered Threaded;Grounding Screw;Water Tight (1)
  • The Dual Internal sealing rings create a raintight seal. (3)
  • The GP Suitable for Direct Burial in the Ground or Concrete, one Wrench Installation (1)
  • The metal body of zinc fittings bonds to the metal (3)
  • Thermoplastic Insulating Throat with Rating up to 105 Degree Celsius (7)
  • Threaded;Grounding Screw;Water Tight (5)
  • Two Screw Connector (2)
  • UL Listed Raintight, No disassembly required, Concretetight (2)
  • UL Type 4 Water Tight (6)
  • Unique profile permits easy wrenching. Smooth, accurately tapped threads facilitate installation. Watertight and corrosion resistant. NEMA Types: 2,3,3R,4,4X,12, 13 (3)
  • Watertight Fittings designed for indoor and outdoor applications (15)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland (2)
  • Watertight Seal on Outer Sheath of Cable;Armoured and TECK Armoured Gland and Non-Armoured Barrier (2)
  • Weight 110 Lb per 100 (1)
  • Weight 113 Lb per 100 (1)
  • Weight 188 Lb per 100 (1)
  • Weight 19 Lb per 100 (1)
  • Weight 21 Lb per 100 (1)
  • Weight 236 Lb per 100 (1)
  • Weight 25 Lb per 100 (1)
  • Weight 30 Lb per 100 (1)
  • Weight 31 Lb per 100 (1)
  • Weight 312 Lb per 100 (1)
  • Weight 35 Lb per 100 (1)
  • Weight 50 Lb per 100 (3)
  • Weight 60 Lb per 100 (1)
  • Weight 600 Lb per 100 (1)
  • Widest cable ranges from 14/2 to 10/4 (1)
  • With 14 To 4 AWG Aluminum Grounding Lug (14)
  • With 6 To 3/0 AWG Aluminum Grounding Lug (2)
  • With 8 To 1/0 AWG Aluminum Grounding Lug (4)
  • With Cover (3)
  • With Insulated Throat, Concrete Tight (1)
  • With Tri-Drive Screw (1)
  • Zinc electro plated (3)
  • Show More...

• Application

  

  • 45 Degree fitting for connecting flexible metal conduit or armored cable to box or enclosure. Zinc Die Cast (1)
  • 90 Degree connector for use with metallic liquid tight conduit. (3)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. Insulator rated 105 degree C. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • 90 Degree Connector used to connect Flexible Metal Conduit to box enclosure. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. Diameter for 1.500" 0 min to 1.625" 0 max. (1)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. 12/2 (.560" 0 min) to 10/3 (.610" 0 max) (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. 1.187" 0 min to 1.312" 0 max (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.75" 0 min) (.875" 0 max) (1)
  • 90 Degrees connector suitable for used to connect flexible metal conduit to box or enclosure. (1)
  • 90 Degrees connector suitable to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.875" 0 min) to (1.00" 0 max) (1)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Recommended Cable Types Used to Connect Flexible Metal Conduit to Box or Enclosure. Diameter For (.75" 0 Min) to (.875" 0 Max) (1)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • 90°Connector Suitable For Used to Connect Mc/Fmc to Box or Enclosure. Diameter: 1.50" 0 Min to 1.625" 0 Max (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Diameter (.875" 0 Min) to (1.00" 0 Max) (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Recommended Cable Types: 1.187" 0 Min to 1.312" 0 Max (1)
  • 90°Fitting with Cover For Connecting Flexible Metal Conduit to Box or Enclosure (1)
  • 90°Fitting with Cover Recommended Cable Types Used For Connecting Flexible Metal Conduit to Box or Enclosure. 14/4 (.45" 0 Min) to 10/4 (.625" 0 Max). Mc/Mci-A (1)
  • 90°Fitting With Cover Used For Connecting Flexible Metal Conduit to Box or Enclosure (2)
  • 90degree Connector for use with 3/8" Flexible Metal Conduit. Non-Insulated. Recommended cable types: Diameter for 12/2 (.550" 0 min) to 10/3 (.610" 0 max) (1)
  • A Fitting for Connecting a Junction Box to a Conduit System (7)
  • AC - MCI-A - HCF Steel and Aluminum Cable (1)
  • AC/MC (6)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (16)
  • Act as Pull Outlets, Provide Access to Conductors for Maintenance and Future System Changes (1)
  • Approved for indoor and outdoor applications (1)
  • Armored Cable;Metal Clad Cable;MCI-A Cable;Flexible Metallic Conduit to a Box or Enclosure;Dry Appliations (1)
  • Bridgeport Fittings EZ-Lock 3/4 inch steel connector recommended for cables with an O.D. of .56 - .81 or 10/3 to 6/3 Listed for use with steel and aluminum Flexible Metallic Conduit (FMC) in 1/2 inch trade size. Listed for use with Metal Clad (MC) and A (1)
  • Bridgeport Fittings Mighty-Seal® 3/4 inch EMT Connectors are used to connect a 3/4 inch EMT raceway to a box, device, or enclosure. The 251-MSRT 3/4 inch Mighty-Seal® connector is UL listed for use in wet locations. (1)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (1)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (3)
  • Commercial (36)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (155)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - Other (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility: Safety and Security SystemsCommercial / Institutional Buildings / Structures - Safety and Security SystemsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Automation and MonitoringCommercial / Institutional Buildings / St (1)
  • Commercial / Institutional Buildings / Structures - Power Distribution and ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility: Safety and Security SystemsInd Facilities & Factories - Facility: Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Safety and Security SystemsCommercial / Institutional Buildings / Structures - Critical PowerInd Facilities & Factories - Facility: (1)
  • Commercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Safety and Security SystemsInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Facility: Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Safety and Security SystemsCommercial / (1)
  • Commercial / Institutional Buildings / Structures - Safety and Security SystemsInd Facilities & Factories - Facility: Critical PowerCommercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Lighting and Lighting ControlsCommercial / Institutional (1)
  • Commercial;Industrial;Dry Location (1)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (23)
  • Commercial;Industrial;Wet Location (7)
  • Commercial;Non-Hazardous Location (16)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Insulated Throat - 90° C. Patented (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Patented (7)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 4” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (4)
  • Concretetight or Dry Location (1)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (4)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (1)
  • DIRECT BURIAL (1)
  • Electrical (24)
  • EMT Raceway;Wet Locations (6)
  • Existing 1/2 in or 5/8 in wall with 4 in hole saw. (4)
  • Flex AC MC Cable (1)
  • for 3M™ O/B +, R/Y +, 3M™ Scotchlok™ Wire Connectors Y, R, G, and 3M 212, 312, and 512 (1)
  • For Above Ground Pool (1)
  • For AC - MCI-A - HCF steel and aluminum cable (7)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Direct Burial Cables (1)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For connecting portable cord to box or enclosure. Locknut not required. (1)
  • For Connecting To Type A Flexible Nonmetallic Conduit (10)
  • For Connections and Strain Relief in Cramped Spaces (1)
  • For Copper Cable To Bar, Direct Burial Cable (7)
  • For Cross Connecting A Wide Range Of Copper Cable, Direct Burial In Earth Or Concrete (1)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (4)
  • For Direct Burial Cables (7)
  • For Direct Burial In Earth And Concrete (9)
  • For Grounding Gasoline Trucks, Tank Cars, Aircraft And Other Vehicles Where Danger Of Explosion Due To Static Electricity Exists (1)
  • For Indoor Use Only, Copper Or Stranded Aluminum (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (21)
  • For Joining A Range Of Parallel Copper Cables Perpendicular To Rod, Pipe Or Column, Direct Burial In Earth Or Concrete (2)
  • For Joining A Range Of Two Parallel Copper Cables To Rod Or Pipe And Burial In Ground Or Concrete (4)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Joining Three Equal Copper Cables To Rod Or Tube, Direct Burial In Earth Or Concrete (2)
  • For Liquidtight Flexible Metal Conduit (21)
  • For Reaching 1/2" (1.3 cm) and 3/4" (1.9 cm) Connectors in Deep or Tight Boxes (1)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (1)
  • For Service Entrance Cable (1)
  • For Terminating Liquidtight Flexible Metal Conduit to a Enclosure (1)
  • For Terminating Liquidtight Flexible Metal Conduit to a Enclosure at a 90 Degree Angle (1)
  • For use with Carflex conduit and Carflex X-Flex conduit (2)
  • For use with EMT conduit (37)
  • For use with non-metallic sheathed cable and flexible cord (1)
  • For use with rigid/IMC conduit (7)
  • For Used To Accommodates Flexible Rubber Sheath Cable Ranging From #6 - #2 Conductors (1)
  • For Used To Fit All Standard EEI-NEMA Distribution Transformers As A Tank Grounding Terminal (1)
  • For Used To Ground And Secure Nonmetallic Sheathed And Service Entrance Cable to Boxes And Enclosures (2)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (3)
  • General Purpose;Wet Location (3)
  • Grounding and Bonding (4)
  • Grounding and Bonding; Lightning Protection (1)
  • Grounding Wire (7)
  • Hazardous Location (7)
  • Hazardous Location;Wet Location (13)
  • Hazardous Locations;Ordinary Location;Wet/Dry Locations (2)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (8)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Assemblies;Wire Hook-Up;Indoor/Outdoor (12)
  • Ind Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (3)
  • Ind Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Facility: Safety and Security SystemsCommercial / Institutional Buildings / Structures - Critical PowerInd Facilities & Factories - Facility: Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Facility: Power Distribution and ControlCommercial / Institutional Buildings / Structures - Safety and Security SystemsCommercial / In (1)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (20)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Indoor/Outdoor (1)
  • Industrial (7)
  • Industrial;Commercial;Used where liquid-tight flexible metallic raceway is installed in outdoor or indoor locations, and exposed to continuous or intermittent moisture;Used to positively bond flexible liquid-tight flexible metallic conduit to boxes or enclosures;Typical applications include raceway for general purpose industrial and commercial construction, Machine OEMs, panel builders, indoor and outdoor installations;Liquid-tight applications against water, oils, cutting fluids, mild acids;For use in ele (1)
  • Inside/outside box mountable. Connector suitable for use with (1) 8/2, 8/3, 6/2 or 6/3 NM-B cable (1)
  • Inside/outside box mountable. Connector suitable for use with (1) 14/2 to 6/2 NM-B cable or (2) 14/2 to 12/3 NM-B cables in any combination. (1)
  • Install by snapping cable into place, then snapping connector into the box. No tools required. cULus Listed for use with 14/2 to 10/3 (.40"-.63") Aluminum and Steel AC/MC/MCI-A/HCF and 3/8" Aluminum and Steel FMC/RWFMC. (1)
  • Intersystem Bonding of Power and Communication (1)
  • Kindrof(R) Modular Metal Framing System (2)
  • Lightning Protection (1)
  • Metal Framing (1)
  • New work and Retrofit (5)
  • New Work in Poured Concrete;Maintenance, Repairs and Alterations;Connections at Panels and Boxes;New Altered or Damaged Stub-Ups;Applicable Locations Where Field Threading is Impractical or Undesirable (13)
  • NM Cable (11)
  • NM/Flex/AC Cable, MC Steel and Aluminum Jacketed (1)
  • Nonmetallic screw-on 90 degree connectors for use with nonmetallic "Type B" liquid tight conduit. PVC construction with zinc locknut. Connectors simply screw onto cable. No tools required! (1)
  • Nonmetallic screw-on 90 degree connectors for use with nonmetallic "Type B" liquid tight conduit. PVC construction with zinc locknut. Connectors simply screw onto cable. No tools required! Insert UL bug. File No.E9391 (1)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • Offered in Numerous Configurations for 90 Degree Bends;Taps or Splices or Mounting Outlets (3)
  • Outdoor (17)
  • Outdoor;Non Metallic Liquid Tight Conduit Type B;Material;Plastic;Type;Screw On Straight Connector;Color;Gray 0;Size;1 Ph;Description;Pvc 065360 1/2 St Scr On Conn;Form;Form B;Category Description;Non-Metallic Fittings;Special Features;1.44in Length X 1. (2)
  • Physical Protection of Conductors and Long Service Life of the Installation (10)
  • Power Distribution (5)
  • POWER FUSE, CLASS J TYPE; 5-3/4 INCH; UL 248-8, CSA, QPL-WF-1814, CE APPROVAL; 600 VAC VOLTAGE RATING; 1-1/2 INCH DIAMETER; 200000 AMPERE (SYMMETRICAL) INTERRUPTING RATING; 200 AMPERE CURRENT RATING; BLADE TERMINAL TYPE; FAST ACTING CHARACTERISTICS (2)
  • Prevents severe conduit bends and pullout (5)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provides a dependable method for grounding and bonding for electrical systems (1)
  • Provides a Positive Seal Against Water, Oil And Dust (4)
  • Recommended Cable Types 14/2 to 10/2 .38-.59 Steel or Aluminum AC/MC/MCI-A and 3/8 Steel or Aluminum FMC. Simply Snap Cables into Connector and Snap Assembly into Electrical Box. no Tools Required Integral Internal Spring Steel Locking Tabs Fasten Cable (1)
  • Recommended cable types 14/2 to 10/2 with cable range O.D. Steel or Aluminum .38 to .59 AC/MC/MCIA and Steel or Aluminum 3/8" FMC. Simply snap cables into connector and snap assembly into electrical box. No tools required! Integral internal spring steel locking tabs fasten cable or conduit. External spring steel locking tabs secures connector to electrical box. Suitable for maintaining grounding continuity when installed in accordance with the NEC. (1)
  • Recommended cable types for connecting 10/4 to 8/3 PVC MC cable to box or enclosure diameter .61 - .69. RainTight/ConcreteTight (1)
  • Recommended cable types for connecting 14/4 (.43" 0 min) to 10/3 (.61" 0 max) AC/MC Cable or 3/8" Flexible Metal Conduit to box or enclosure. HCF/HCFMCI-A (1)
  • Recommended cable types for use with Steel or Aluminum 14/2 (.38" 0 min) to 10/3 AWG (.61" 0 max) Health Care Facility (HCF) Armored Cable. AC/MC/MCI-A (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.1" to 1.25" (4/4 to 3/4) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.25" to 1.50" (2/4 to 3-2/0) (1)
  • Recommended Cable Types to Connect Armored or Metal Clad Cable to Box or Enclosure. (.44 to .61) 12/2 - 10/4 AC/MC/MCIA/FMC/HCF/HCFMCI-A (1)
  • Recommended Cable Types to Connect Corrugated or Interlocked Mc or Ac Cable to Box or Enclosure. 14/4(.44" 0 Min) to 10/4 (.61" 0 Max) Mci-A. 12/2 to 10/4 Ac/Mc/Mcia/Hcf/Hcfmci-A 3/8" Fmc. 14/2 - 10/3 Nm Cable (1)
  • Recommended Cable Types to Connect Mc & Ac Cable or 3/8 Inch Flexible Metal Conduit to Box or Enclosure. 14/2 (.38" 0 Min) to 10/3 (.61" 0 Max) Mci-A/Hcf/Hcfmcia (1)
  • Recommended cable types to connect steel armored cable to box or enclosure. 14/2-10/3 Steel Armored and .43 -.61 Steel Interlocked MC (1)
  • Recommended cable types to connect steel flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. Armored Cable .86" - .92 DIA. (1)
  • Recommended Cable Types to Connect Steel Flexible Metal Conduit or Armored Cable to Box or Enclosure. Armored Cable .86"-.92" Dia (1)
  • Recommended Cable Types to Connect Steel or Aluminum Flexible Metal Conduit or Armored Cable to Box or Enclosure. (.56-.61 Dia.) For 12/3 to 10/3 Steel or Aluminum Mc Cable (1)
  • Recommended cable types used to connect AC/MC/MCIA .40-.62 cable to box or enclosure. (1)
  • Recommended Cable Types Used to Connect AC/MC/MCI-A, Diameter for 14/2 (0.43 in 0 Min) to 10/3 (0.62 in 0 Max) (1)
  • Recommended cable types used to connect steel interlocked, aluminum interlocked and aluminum corrugated metal clad cable, 1/2" FMC to box or enclosure. Insulator rated 105 degree C. Diameter for 10/4 (.62" 0 min) to 6/3 (.803" 0 max) (1)
  • Recommended cable types used to secure Steel or Aluminum Flexible Metal Conduit or Armored, Metal Clad Cable to box or enclosure. Diameter for .70 - .855. 8/3 - 6/3 AC/MC/MCI-A (1)
  • Recommended cable types with 12/2 to 10/3 PVC Jacket MC Cable or TECK Cable .50 - .61. RainTight and ConcreteTight (1)
  • Recommended Cable Types With Steel or Aluminum 14/2 (0.43" 0 Min) to 10/3 (0.61" 0 Max) AC or MC Cable or 3/8 in Flexible Metal Conduit to Box or Enclosure (1)
  • Recommended Cable Types With Steel Or Aluminum 14/2 to 10/3 Ac Or Mc Cable, Or 3/8" Flexible Metal Conduit to Box Or Enclosure. Diameter For 14/2 (.43" 0 Min) to 10/3 (.61" 0 Max) (1)
  • Screw-In Connector for flexible metal conduit (2)
  • Set screw connector used to join EMT to box or enclosure. Insulated Throat 105degreeC (3)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight when taped. (1)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (6)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (3)
  • Simply snap cables into connector and snap assembly into electrical box. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with metallic liquid tight conduit. (1)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (6)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (15)
  • Terminate Conduit Runs Through The Wall of a Sheet Metal Electrical Enclosure (2)
  • Terminates flexible metal conduit to a knockout in a dry location box or enclosure (2)
  • The 250-MB is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 250-MBI is used to connect a properly deburred length of EMT raceway to a box, device, panelboard, or similar electrical enclosure. Simply push the fitting on to raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 251-MB is used to connect a properly deburred length of EMT raceway to a box or electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Dry locations only. Patented (1)
  • The 251-MBI is used to connect a properly deburred length of EMT raceway to a box device, panelboard, or similar electrical enclosure. Simply push the fitting onto raceway with a slight twist. Remove the fitting by unthreading it from conduit end. No tools are required. Concrete Tight. Patented (1)
  • The 630-NM2 allows for multiple nonmetallic cables to be installed into a single 3/4" KO. Simply squeeze the tabsto install or remove the cables. Each port can hold One 10/3 through 14/2 cable; or One Oval 10/2, 12/2 or 14/2; or Two Oval 14/3 or 12/3; or Two Oval 10/2 thru 14/2 NM Cables. Patented. (1)
  • The holding of wires (1)
  • These conductors can be used to tap one or two cables from bus bar. One wrench installation (1)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (15)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box or Enclosure, or to Couple Ends of Threadless Conduit (6)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box/Enclosure or to Couple Ends of Threadless Conduit (4)
  • To Connect Flexible Cord to a Box or Enclosure and Provide Adequate Strain Relief (3)
  • To Connect Threaded Metal Conduit to a Threadless Opening in a Box or Enclosure (10)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Roated (12)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Rotated (1)
  • To ground and secure EMT raceway sections together in wet locations (5)
  • To ground and secure EMT Raceways sections together (6)
  • To ground and secure EMT Raceways to boxes and enclosures (22)
  • To ground and secure EMT Raceways to boxes and enclosures in wet locations (1)
  • To join lengths of steel EMT for concretetight, dry or damp locations (1)
  • To positively bond conduit to box or enclosure (38)
  • To provide a liquidtight, dust tight connection between flexible, non-metallic conduit and a box or an enclosure (3)
  • To provide a liquidtight; dust tight connection between flexible, non-metallic conduit and a box or an enclosure. (1)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (5)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertight. Suitable for Aluminum and Steel Rigid Conduit (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertightnants from entering enclosure. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminum and Steel Rigid Conduit (1)
  • Used to connect 14/2-10/3 (.43" - .61") AC/MC/MCI-A/HCF cable and 3/8" FMC to box or enclosure. Just squeeze to insert into the 1/2" K.O. Use with an anti-short bushing. .375"Throat Opening. Great for lighting whips! Patent Pending (1)
  • Used to connect 2 14/2 - 10/2 (.43" - .59") AC/MC/MCI-A/HCF cables and 3/8" FMC to box or enclosure. No Tools Required Just squeeze to insert into the 1/2" K.O Use with an anti-short bushing. .375" Throat Opening. Great for lighting whips! (1)
  • Used to connect EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (1)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (14)
  • Used to connect flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to connect rigid metal conduit or IMC to a threqadless opening in an enclosure. (3)
  • Used to Connect Rigid or IMC Conduit to a Threadless Opening in an Enclosure (9)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Steel Flexible Metal Conduit to Box or Enclosure (1)
  • Used to connect steel flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to join EMT to box or enclosure. Concrete tight/raintight (1)
  • Used to join EMT to box or enclosure. Concrete/Raintight (3)
  • Used to join EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (2)
  • Used to join EMT to box or enclosure. Concrete tight. (20)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (5)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. (1)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (6)
  • Used to join EMT to box or enclosure. Concrete/Raintight (1)
  • Used to join EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (1)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. (5)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. Insulator rated 105degree C. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 4" suitable for use with Steel or Aluminum EMT. (1)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. Insulator rated 105°C. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 2 in Suitable for use with Steel or Aluminum EMT;Wet Locations (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 4 in Suitable for use with Steel or Aluminum EMT;Wet Locations (2)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete-tight. (9)
  • Used to join two lengths of threaded conduit. (7)
  • Used to Secure EMT to Box or Enclosure (8)
  • Used to secure EMT to box or enclosure. 1/2" thru 1" concrete-tight, 1-1/4" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with steel or aluminum EMT. Plastic insulator rated 105degreeC. (1)
  • Used to secure EMT to box or enclosure. Insulated Throat 105degreeC (1)
  • Used to secure steel EMT to box or enclosure. concrete tight when taped (2)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (3)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (6)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (1)
  • Used to secure to box or enclosure. (1)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (47)
  • Utility/Ground Grid (3)
  • Wet Location (15)
  • Wire Termination (3)
  • Wireway Accessory (2)
  • Wiring Enclosure;Pendant Station;Hand Tool;Construction;Processing and Material Handling Equipment;Pump;Motor and Machine Tool;Hazardous/Wet Location (2)
  • Show More...

• Knockout Size

  

  • 0.370 in (2)
  • 0.88 in (1)
  • 1 in (8)
  • 1.13 in (1)
  • 1.38 in (1)
  • 1/2 in (14)
  • 1-1/2 in (4)
  • 1-1/4 in (6)
  • 19/32 in (1)
  • 2 in (4)
  • 2.50 in (1)
  • 3.63 in (1)
  • 3/4 in (8)
  • 3/8 in (2)
  • 4.63 in (1)
  • Show More...

• Width

  

  • 0.42 in;10.7 mm (1)
  • 1.05 (1)
  • 1.087 (1)
  • 1.228 in (1)
  • 1.25 (1)
  • 1.31 (1)
  • 1.41 (2)
  • 1.42 (2)
  • 1.5 in (1)
  • 1.52 (1)
  • 1.53 (1)
  • 1.54 (1)
  • 1.55 (1)
  • 1.594 in (1)
  • 1.595 (1)
  • 1.64 in (1)
  • 1.664 (2)
  • 1.75 (1)
  • 1.768 (1)
  • 1.8 (1)
  • 1.82 (1)
  • 1.89 (1)
  • 1.93 (1)
  • 1.94 (1)
  • 10.00 In (1)
  • 1-1/2 in (1)
  • 1-1/8 (1)
  • 1-5/8 in (2)
  • 2.000000000000000 (2)
  • 2.04 in (2)
  • 2.2 (1)
  • 2.25 (1)
  • 2.289 (1)
  • 2.387 (1)
  • 2.428 (1)
  • 2.46 (2)
  • 2.5 (5)
  • 2.525 (1)
  • 2.55 (1)
  • 2.7 (1)
  • 2.75 (1)
  • 2.872 (1)
  • 3 in (1)
  • 3.15 (1)
  • 3.36 (1)
  • 3.389 (1)
  • 3.42 (1)
  • 3.645 (2)
  • 3.722 (1)
  • 4 (1)
  • 4.00 In (1)
  • 4.00 In (Main), 3.00 In (Reduced) (1)
  • 4.06 (1)
  • 4.107 (2)
  • 4.51 (1)
  • 45.2-45.2 (1)
  • 5.29 (1)
  • 51-51 (1)
  • 5-7/8 in (1)
  • 6.00 In (1)
  • 8 (1)
  • 8.00 In (1)
  • Show More...

• Hub Size

  

  • 1 in (3)
  • 1 INCH (22)
  • 1.56 in (1)
  • 1.81 in (1)
  • 1/2 in (2)
  • 1/2 INCH (13)
  • 1-1/2 in (2)
  • 1-1/2 INCH (16)
  • 1-1/4 in (2)
  • 1-1/4 INCH (9)
  • 2 in (2)
  • 2 INCH (20)
  • 2.13 in (1)
  • 2-1/2 in (2)
  • 3 in (2)
  • 3 INCH (3)
  • 3.38 in (1)
  • 3/4 in (7)
  • 3/4 INCH (24)
  • 3/8 in (2)
  • 3-1/2 in (1)
  • 4 in (2)
  • 4 INCH (1)
  • 4.50 in (1)
  • 5.75 in (1)
  • Show More...

• Number Of Conductors

  

  • 1 (20)
  • 1 Cable (17)
  • 2 (2)
  • up to 6 max (1)
  • Show More...

• Thread Size

  

  • 0.63 in (4)
  • 0.66 in (1)
  • 0.72 in (1)
  • 1 in (11)
  • 1 in NPT (8)
  • 1/2 in (11)
  • 1/2 in NPT (8)
  • 1-1/2 in (1)
  • 1-1/2 in NPT (8)
  • 1-1/4 in (2)
  • 1-1/4 in NPT (5)
  • 2 in NPT (9)
  • 2-1/2 in NPT (3)
  • 3 in NPT (5)
  • 3/4 in (13)
  • 3/4 in NPT (9)
  • 3/8 in NPT (3)
  • 4 in NPT (2)
  • Show More...

• Bend Radius

  

  • 16 INCH (1)
  • 9.5 INCH (1)
  • Show More...

• Number Of Gangs

  

  • 1 (6)
  • 2 (3)
  • Show More...

• Package Quantity

  

  • 1 CA (1)
  • 1 ct (23)
  • 1 CT;10 PK (15)
  • 1 CT;100 PK (1)
  • 1 CT;12 PK (6)
  • 1 CT;15 PK (1)
  • 1 CT;2 Pk (4)
  • 1 CT;20 PK (2)
  • 1 CT;25 PK (8)
  • 1 CT;4 Pk (1)
  • 1 CT;5 PK (19)
  • 1 CT;50 Pk (5)
  • 1 CT;6 Pk (1)
  • 1 CT;8 PK (2)
  • 1 PK (10)
  • 1 PK;10 CT (1)
  • 1 PK;10 PK (1)
  • 1 PK;2 CT (1)
  • 1 PK;20 CT (2)
  • 1 PK;5 CT (3)
  • 10 (1)
  • 10 CT (12)
  • 10 CT;100 PK (12)
  • 10 CT;50 PK (13)
  • 10 CT;60 PK (4)
  • 10 PK (16)
  • 10 PK;1 CT (13)
  • 10 PK;2 CT (13)
  • 10 PK;50 PK (7)
  • 10/100 PK (3)
  • 100 CT;1000 PK (3)
  • 100 PK (6)
  • 100 PK;10 CT (5)
  • 100 PK;25 CT (6)
  • 12 CT (2)
  • 12 PK (1)
  • 120 PK;20 CT (1)
  • 125 PK (1)
  • 125 PK;25 CT (3)
  • 15 CT;19 PK (1)
  • 15 PK;1 CT (2)
  • 150 PK (1)
  • 2 CT (4)
  • 2 CT;1 PK (1)
  • 2 CT;10 PK (7)
  • 2 CT;5 PK (1)
  • 2 PK (11)
  • 2 PK;1 CT (1)
  • 2 PK;10 PK (2)
  • 2/10 PK (4)
  • 20 CT;1 PK (2)
  • 20 CT;100 PK (4)
  • 20 CT;120 PK (1)
  • 20 CT;200 PK (2)
  • 20 PK (3)
  • 200 PK (1)
  • 200 PK;20 CT (2)
  • 200 STD PK;20 CT (1)
  • 25 CT (28)
  • 25 CT;1 PK (3)
  • 25 CT;100 PK (15)
  • 25 CT;250 PK (14)
  • 25 CT;50 PK (11)
  • 25 PK (13)
  • 25 PK (Inner);100 PK (Outer) (3)
  • 25 PK (Inner);50 PK (Outer) (1)
  • 25 PK;1 CT (11)
  • 25 PK;100 PK (7)
  • 25 PK;20 CT (1)
  • 25 PK;250 PK (2)
  • 25/100 PK (1)
  • 250 PK (4)
  • 250 PK;1000 PK (1)
  • 250 PK;25 CT (11)
  • 250 PK;50 CT (4)
  • 30 CT (1)
  • 30 PK;5 CT (1)
  • 40 PK;10 CT (1)
  • 5 CT (17)
  • 5 CT;1 PK (4)
  • 5 CT;100 PK (1)
  • 5 CT;200 PK (1)
  • 5 CT;25 PK (15)
  • 5 CT;30 PK (2)
  • 5 CT;50 PK (2)
  • 5 PK (12)
  • 5 PK (Inner);25 PK (Outer) (3)
  • 5 PK;25 PK (7)
  • 5/25 PK (2)
  • 5/50 PK (2)
  • 50 CT (4)
  • 50 CT;1 PK (1)
  • 50 CT;200 PK (7)
  • 50 CT;250 PK (1)
  • 50 CT;500 PK (6)
  • 50 PK (4)
  • 50 PK;1 CT (1)
  • 50 PK;10 CT (1)
  • 50 PK;250 PK (1)
  • 50 PK;500 PK (7)
  • 500 PK (4)
  • 500 PK;50 CT (5)
  • 500 STD PK;50 CT (3)
  • 6 PK (5)
  • 6 PK;1 CT (4)
  • 60 PK;10 CT (1)
  • Show More...

• Includes

  

  • (2) Screw (11)
  • Set Screw (1)
  • Standard Neoprene Bushing (13)
  • Show More...

• Number Of Hubs

  

  • 1 (6)
  • 2 (71)
  • 3 (1)
  • 3 IN (29)
  • 4 (3)
  • Show More...

• Weight

  

  • 0.0001 lb/EA (1)
  • 0.0002 lb/EA (2)
  • 0.0005 lb/EA (3)
  • 0.0006 lb/EA (2)
  • 0.0007 lb/EA (2)
  • 0.0008 lb/EA (1)
  • 0.003 lb/EA (1)
  • 0.006 lb/EA (1)
  • 0.0078 lb/EA (1)
  • 0.0223 lb/EA (1)
  • 0.038 lb/EA (1)
  • 0.04 lb/EA (1)
  • 0.049 lb/EA (2)
  • 0.0513 lb/EA (1)
  • 0.058 lb/EA (1)
  • 0.06 lb/EA (1)
  • 0.061 lb/EA (1)
  • 0.062 lb/EA (3)
  • 0.068 lb/EA (2)
  • 0.07 lb/EA (2)
  • 0.076 lb/EA (2)
  • 0.08 lb/EA (3)
  • 0.082 lb/EA (2)
  • 0.085 lb/EA (1)
  • 0.09 lb (1)
  • 0.09 lb/EA (2)
  • 0.096 lb/EA (1)
  • 0.0984 lb/EA (1)
  • 0.1 lb/EA (2)
  • 0.100 lb/EA (1)
  • 0.1016 lb/EA (1)
  • 0.102 lb/EA (1)
  • 0.108 lb/EA (1)
  • 0.109 lb/EA (1)
  • 0.11 lb (2)
  • 0.11 lb/EA (5)
  • 0.112 lb/EA (1)
  • 0.117 lb/EA (1)
  • 0.118 lb/EA (2)
  • 0.12 (1)
  • 0.12 lb/EA (4)
  • 0.1289 lb/EA (1)
  • 0.13 lb (1)
  • 0.13 lb/EA (3)
  • 0.130 lb/EA (1)
  • 0.1328 lb/EA (1)
  • 0.133 lb/EA (1)
  • 0.138 lb/EA (2)
  • 0.14 lb (1)
  • 0.14 lb/EA (7)
  • 0.15 (1)
  • 0.15 lb (1)
  • 0.15 lb/EA (5)
  • 0.159 lb/EA (1)
  • 0.167 lb/EA (1)
  • 0.17 lb/EA (1)
  • 0.18 lb/EA (3)
  • 0.187 lb/EA (1)
  • 0.19 lb (2)
  • 0.193 lb/EA (2)
  • 0.2 lb (1)
  • 0.2 lb/EA (2)
  • 0.208 lb/EA (1)
  • 0.22 lb/EA (4)
  • 0.225 lb/EA (1)
  • 0.23 (2)
  • 0.23 lb/EA (3)
  • 0.25 lb/EA (3)
  • 0.250 lb/EA (1)
  • 0.2779 lb/EA (1)
  • 0.286 lb/EA (1)
  • 0.29 lb/EA (1)
  • 0.3 lb/EA (2)
  • 0.31 lb/EA (1)
  • 0.320 lb/EA (1)
  • 0.34 lb/EA (3)
  • 0.35 lb/EA (2)
  • 0.36 lb/EA (5)
  • 0.38 lb/EA (5)
  • 0.389 lb/EA (1)
  • 0.39 lb/EA (4)
  • 0.4 lb/EA (2)
  • 0.404 lb/EA (1)
  • 0.42 lb (1)
  • 0.428 lb/EA (1)
  • 0.43 (1)
  • 0.43 lb/EA (3)
  • 0.44 lb (1)
  • 0.45 lb/EA (1)
  • 0.48 lb/EA (2)
  • 0.5 lb/EA (3)
  • 0.51 lb/EA (1)
  • 0.52 lb/EA (2)
  • 0.53 (1)
  • 0.53 lb/EA (2)
  • 0.533 lb/EA (2)
  • 0.54 lb (1)
  • 0.55 lb (1)
  • 0.55 lb/EA (3)
  • 0.550 lb/EA (1)
  • 0.56 lb (2)
  • 0.56 lb/EA (2)
  • 0.58 (1)
  • 0.61 lb/EA (1)
  • 0.635 lb/EA (1)
  • 0.664 lb/EA (1)
  • 0.7 lb (1)
  • 0.73 lb/EA (1)
  • 0.75 (1)
  • 0.76 lb/EA (3)
  • 0.768 lb/EA (1)
  • 0.87 lb/EA (1)
  • 0.89 lb/EA (1)
  • 0.9 lb/EA (1)
  • 1.02 lb/100 (1)
  • 1.03 lb/EA (1)
  • 1.08 lb (1)
  • 1.12 lb (1)
  • 1.1239 lb/EA (1)
  • 1.1599 lb (1)
  • 1.23 lb/EA (1)
  • 1.25 lb/EA (1)
  • 1.308 lb/EA (2)
  • 1.36 lb/EA (1)
  • 1.4 lb/EA (1)
  • 1.4799 lb/EA (1)
  • 1.499 lb/EA (1)
  • 1.5 lb/EA (1)
  • 1.6 oz (45 g) (1)
  • 1.63 lb/EA (1)
  • 1.85 lb/EA (1)
  • 1.88 lb/EA (2)
  • 1.92 lb/100 (1)
  • 1.9599 lb/EA (1)
  • 10 kg/100;22 lb/100 (1)
  • 10 lb (1)
  • 10.00 lb/100;4.54 kg/100 (1)
  • 10/100 lb/EA (1)
  • 104.00 lb;47.17 kg (1)
  • 11.2 oz (318 g) (1)
  • 11.3 lb/100 (1)
  • 110.2 lb/100 (1)
  • 113 lb/100 (1)
  • 12 lb/100 (1)
  • 12 lb/EA (2)
  • 121.3 lb/100 (1)
  • 124 lb/100 (1)
  • 124.00 lb/100;56.25 kg/100 (1)
  • 125 lb/100 (1)
  • 13 lb/100 (2)
  • 135 lb/100 (1)
  • 137.5 lb/100 (2)
  • 14 lb/100 (3)
  • 149.00 lb;67.59 kg (1)
  • 15.00 lb/100;6.80 kg/100 (2)
  • 15.4 kg/100;34 lb/100 (1)
  • 155 lb/100 (2)
  • 156 lb/100 (1)
  • 160.5 lb/100 (1)
  • 162 lb/100 (1)
  • 176.4 lb/100 (2)
  • 179.5 lb/100 (1)
  • 18 lb/100 (2)
  • 19 lb/100 (3)
  • 19.5 lb/100 (1)
  • 193 lb/100 (1)
  • 2 lb (1)
  • 2 lb/EA (3)
  • 2.1 lb (1)
  • 2.18 lb/EA (1)
  • 2.25 lb/EA (1)
  • 2.35 lb/EA (1)
  • 2.39 lb/100 (1)
  • 2.45 lb/EA (2)
  • 2.5 lb (1)
  • 2.5 lb/EA (2)
  • 2.56 lb/EA (1)
  • 2.65 lb/EA (1)
  • 2.68 lb (1)
  • 20 lb/100 (1)
  • 20.5 lb/100 (1)
  • 204.1 kg/100;450 lb/100 (1)
  • 21 lb/100 (2)
  • 21 lb/100;9.53 kg/100 (1)
  • 217 lb/100 (1)
  • 229 lb/100 (1)
  • 23 lb/100 (2)
  • 25 lb/100 (3)
  • 25.00 lb;11.34 kg (1)
  • 26 lb/100 (2)
  • 26.7 lb/100 (1)
  • 265 lb/100;120.20 kg/100 (1)
  • 27.1 lb/100 (1)
  • 28.7 lb/100 (1)
  • 29.63 lb/100 (1)
  • 3 lb (1)
  • 3 lb/EA (1)
  • 3.54 lb/EA (1)
  • 3.65 lb/100 (1)
  • 32 lb/100 (2)
  • 32 lb/100;14.51 kg/100 (1)
  • 32.88 lb/100 (1)
  • 33.13 lb/100 (1)
  • 350.00 lb;158.76 kg (1)
  • 363.8 lb/100 (1)
  • 37.5 lb/100 (5)
  • 38 lb/100 (1)
  • 38.1 kg/100;84 lb/100 (1)
  • 39 lb;17.69 kg (1)
  • 39.00 lb;17.69 kg (1)
  • 39.7 lb/100 (2)
  • 391 lb/100 (1)
  • 4 lb (2)
  • 4.04 lb/EA (1)
  • 40.38 lb/100 (1)
  • 42 lb/100 (1)
  • 425 lb/100;192.78 kg/100 (1)
  • 44.1 lb/100 (2)
  • 44.30 lb;20.09 Kg (1)
  • 45 lb/EA (1)
  • 456.4 lb/100 (1)
  • 5 lb (4)
  • 5 lb/EA (1)
  • 50 lb/100 (3)
  • 525 lb/100 (1)
  • 54.4 kg/100;120 lb/100 (1)
  • 56.5 lb/100 (1)
  • 59 lb/100 (1)
  • 6 lb/EA (1)
  • 6.8 kg/100;15 lb/100 (1)
  • 60 lb/100 (1)
  • 63.5 lb/100 (1)
  • 64.5 lb/100 (1)
  • 7 lb (3)
  • 70.5 lb/100 (1)
  • 71 lb/100 (1)
  • 72 lb/100;32.66 kg/100 (1)
  • 74.5 lb/100 (1)
  • 74.8 kg/100;165 lb/100 (1)
  • 762.5 lb/100 (1)
  • 789.2 lb/100 (1)
  • 8 lb (1)
  • 85 lb/100 (1)
  • 85 lb/100;38.56 kg/100 (1)
  • 859.8 lb/100 (1)
  • 87 lb/100 (1)
  • 88.00 lb;39.92 kg (1)
  • 93 lb/100 (2)
  • 96.1 lb/100 (1)
  • 99.2 lb/100 (1)
  • Show More...

• Hub Location

  

  • (1) EACH END (2)
  • (1) Each Side (2)
  • (1) End (5)
  • (1) Side (1)
  • (2) Side, (1) Top (4)
  • 45 Degree (4)
  • 90 DEG (1)
  • 90 Degree (47)
  • BOTTOM, SIDE (1)
  • Cross (1)
  • Side (6)
  • Straight (11)
  • TEE (17)
  • TEE BACK (8)
  • Show More...

• Overall Length

  

  • 0.5 in (1)
  • 0.625 in (1)
  • 1 in (1)
  • 2.06 in;52 mm (1)
  • 4 in (2)
  • 4-1/4 in (1)
  • 9" (22.9 cm) (1)
  • Show More...

• Mounting Type

  

  • Push-In (2)
  • Push-On (6)
  • Show More...

• Configuration

  

  • C (11)
  • LB (24)
  • LBD (1)
  • LL (12)
  • LR (11)
  • T (17)
  • TB (8)
  • UB (5)
  • X (1)
  • Show More...

• Number Of Holes

  

  • 4 (1)
  • 5 (1)
  • 9 (1)
  • Show More...

• Height

  

  • 0.6875 in (1)
  • 1.228 in (1)
  • 1.53 (1)
  • 1.594 in (1)
  • 1.66 in (1)
  • 1.67 in (1)
  • 1.768 (1)
  • 10 (1)
  • 10.00 In (1)
  • 11/16 in (1)
  • 1-1/8 (1)
  • 1-13/16 in (1)
  • 1-15/16 in (1)
  • 1-19/32 in (1)
  • 12 (1)
  • 1-7/8 in (2)
  • 1-9/16 in (1)
  • 2.29 (1)
  • 2.35 in (1)
  • 2.44 in (1)
  • 2.67 in (1)
  • 2.85 (1)
  • 2-23/32 in (1)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 38.1-38.1 (1)
  • 4 (2)
  • 4.00 in (1)
  • 4.00 In (Main), 3.00 In (Reduced) (1)
  • 6 (1)
  • 6.00 In (1)
  • 8 (2)
  • 8.00 In (1)
  • Show More...

• Manufacturer Status

  

  • Inactive (3)
  • Non-Stock (205)
  • Show More...

• Category Description

  

  • ALL PLASTIBOND FITTINGS (155)
  • CORD CONNECTORS & CORD GRIPS (149)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (6)
  • DIECAST EMT FITTINGS (61)
  • FASTENERS (3)
  • FLEX & MC FITTINGS (195)
  • FORM 5 CONDULETS, COVERS, & GASKETS (16)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (12)
  • Fuses & Fuse Accessories (39)
  • HAND TOOLS (1)
  • HAZARDOUS LOCATION FITTINGS (23)
  • METALLIC FITTINGS (219)
  • MISC FITTINGS (6)
  • NON-METALLIC FITTINGS (92)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (5)
  • PVC CONDULETS (1)
  • Residential cord connectors (1)
  • RIGID COUPLINGS (3)
  • RIGID NIPPLES (1)
  • ROMEX CONNECTORS (12)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (99)
  • SPLICE KITS (1)
  • SPLIT BOLTS (2)
  • STEEL EMT FITTINGS (316)
  • STEEL WIRE WAY JUNCTION BOXES (11)
  • TAPE (2)
  • TERMINAL BLOCK ACESSORIES (1)
  • TIME CLOCKS (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (126)
  • WIRE DUCT AND COVERS (1)
  • WIRE NUTS (1)
  • Show More...

• Form Type

  

  • FORM 7 (42)
  • FORM 8 (43)
  • MOGUL (2)
  • Show More...

• Installation

  

  • COMPRESSION (1)
  • SCREW (83)
  • U-Bolt to Pipe/Rod (1)
  • Show More...

• Cover Type

  

  • No Cover (1)
  • PVC Coated (88)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR (ALUMINUM), SCREW ON (1)
  • SCREW (5)
  • Screw Cover (1)
  • Show More...

• Access Opening

  

  • 45 Degree Back (4)
  • BACK (33)
  • CROSS SIDE (1)
  • LEFT SIDE (12)
  • RIGHT SIDE (11)
  • SIDE (28)
  • Show More...

• Used On

  

  • EMT CONDUIT (2)
  • Flexible Non-Metallic Liquidtight Tubing (1)
  • Liquid Tight Conduit (2)
  • Liquidtight Conduit (5)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (8)
  • Parallel/90 Degree Copper Cable to Pipe/Rod, Wire to Rebar, Fence Post, Direct Burial (1)
  • RIGID CONDUIT (90)
  • Threaded PVC Coated Rigid Conduit (1)
  • Show More...

• Temperature Rating

  

  • 105 C (16)
  • 105 Degree (9)
  • 105?°C (33)
  • 194 (2)
  • -25 To 40 Deg C (30)
  • -25 To 60 Deg C (7)
  • 90 (3)
  • 90 C (3)
  • THREADING MACHINE PIPE PLUG, 1/8 INCH NPT DESIGNATED SIZE; PIPE PLUG; 535, 535-A, 535-M USED ON MODEL/BRAND; PIPE AND BOLT THREADING MACHINE USED ON POWER TOOL; NUMBER OF QUANTITY 2; WARRANTY LIFETIME (1)
  • Show More...

• Connector Type

  

  • BNC Connector (1)
  • Color-Coded (1)
  • Compression (90)
  • Duplex (1)
  • E-Z Lock® (4)
  • FMC (30)
  • Jacketed MC/TECK (2)
  • Liquidtight (14)
  • LiquidTight, Insulated (3)
  • Nonmetallic (1)
  • Nonmetallic, Screw-on (1)
  • PUSH FIT (2)
  • PUSH-EMT® (6)
  • Screw In (2)
  • Screw-In (5)
  • Screw-In, Insulated (6)
  • SET SCREW (61)
  • Single Screw Strap-Type, Insulated (1)
  • Single Screw, Strap Type (2)
  • Snap (2)
  • SOCxSOC (3)
  • Squeeze (24)
  • Squeeze, Insulated (9)
  • Steel Raintight/Concrete-Tight Insulated (10)
  • STRAIGHT (12)
  • STRAIGHT MALE (2)
  • Straight Nonmetallic (8)
  • Straight, Insulated (3)
  • Three-piece Conduit (7)
  • Two Screw Strap Type (1)
  • Two Screw, Strap Type (3)
  • Two-Screw, Strap Type (12)
  • U Shaped (2)
  • U Shaped, Insulated (1)
  • Show More...

• Type

  

  • 1-Hole AC/MC Strap (6)
  • 1-Hole Aluminum Strap (1)
  • 2 Screw Connector (1)
  • 45 Degree (1)
  • 90 DEG Connector (2)
  • 90 Deg Liquid Tight Conduit Connector (1)
  • 90 Degree (7)
  • 90 degree, uninsulated, liquidtight and Type B (1)
  • Aluminum Die Cast, Watertight Hubs, Insulated and Gasketed (3)
  • BIBD, Multi-Port (2)
  • BOX CONNECTOR (1)
  • Bulkhead Fitting (7)
  • Bullet-45 Degree (4)
  • Bullet-90 Degree (5)
  • Bullet-Straight (6)
  • Cable gland (37)
  • Clamp type connector (9)
  • Commercial hub (10)
  • COMPRESSION (2)
  • Compression Connector (32)
  • Compression connector, uninsulated, EMT (3)
  • Compression coupling (17)
  • Compression Couplings & Connectors (10)
  • Compression Tap (2)
  • CONDUIT CONNECTOR (1)
  • Conduit Coupling (3)
  • CONNECTOR (279)
  • CONNECTOR ENT TO EMT (1)
  • Connector Tool (1)
  • Connectors (2)
  • Connectors-45 Degree (10)
  • Connectors-90 Degree (29)
  • Connectors-Straight (31)
  • Cord Connectors-Straight (1)
  • Cord Grips (12)
  • COUPLING (26)
  • DEAD END (5)
  • Double Screw (1)
  • Double Snap (2)
  • Duplex E-Z LOCK® Snap-In MC Connector (2)
  • EMT (6)
  • EMT Conduit Compression Coupling (12)
  • EMT Conduit Fittings (47)
  • EMT Conduit Set Screw Coupling (7)
  • EMT Conduit Straight Compression Connector (12)
  • EMT Conduit Straight Set Screw Connector (11)
  • EMT Conduit Straight Set Screw Coupling (1)
  • EMT Set Screw Connector (1)
  • EXPANSION JOINT (2)
  • E-Z LOCK (3)
  • FEED THROUGH (3)
  • Feed-Through (1)
  • FEMALE/FEMALE (6)
  • FEMALE/MALE (12)
  • Fittings & Hardware (2)
  • Fittings, Brackets & Hardware (1)
  • Flex (3)
  • GAR (23)
  • GAR3902 (1)
  • GAR-BU (2)
  • GB (4)
  • GBM (3)
  • GC (4)
  • GD (4)
  • GIE-G (1)
  • GIE-G, Heavy Duty (1)
  • GP (2)
  • Ground Rod Clamps Range Taking (1)
  • Ground Rod Clamps Standard Duty (3)
  • Grounding Busbar (3)
  • Grounding Busbars (1)
  • Grounding Connector (1)
  • Grounding Connector-90&deg, (1)
  • Grounding Connectors-45 degree (11)
  • Grounding Connectors-90 degree (11)
  • Grounding Connectors-Straight (14)
  • Grounding Hub (7)
  • GX (1)
  • Heavy Duty Ground Connector For Parrallel Copper Cables (2)
  • Heavy Duty Ground Connector For Three Parrallel Copper Cables (1)
  • Heavy Duty Ground Connector For Two Parrallel Copper Cables (1)
  • HUB (24)
  • Hub Connector (10)
  • Hub, Drain (1)
  • INLINE INTERSYSTEM BONDING BRIDGE (1)
  • Insulated Duplex E-Z LOCK® Snap-In MC Connector (2)
  • Intersystem Bonding Connector (1)
  • KC and K2C Series (9)
  • Lay-In Ground Lug Direct Burial (1)
  • LED Tapes (1)
  • Liquidtight connector (95)
  • Liquidtight Fittings (5)
  • Liquidtight Flexible Metal Conduit Fittings (1)
  • MALE/FEMALE (3)
  • No Thread Connector (3)
  • nVent ERICO Cadweld One Shot (4)
  • Parallel Cable Connectors (1)
  • Plugmold (1)
  • Pool Water Bonding Kit (1)
  • Push-In Connector (33)
  • Push-In Connectors (1)
  • Push-in raintight connector (1)
  • Raceway (3)
  • Rain Tight Compression Connector (1)
  • Raintight Compression (3)
  • Raintight compression connector (20)
  • Raintight compression coupling (7)
  • Replacement Sleeves (3)
  • Rigid and Intermediate Metal Conduit Fittings (1)
  • Saddle Connector (1)
  • Sconce Box (4)
  • SCREW (1)
  • Screw In Connector (3)
  • Screw in connector, uninsulated, flex (1)
  • Screw-in Snap-Tite Connector (1)
  • Set screw connector, EMT, uninsulated (1)
  • Set screw connector, insulated, EMT (7)
  • Set screw coupling, EMT (1)
  • Set Screw Couplings & Connectors (1)
  • Set screw type connector (26)
  • Set screw type coupling (15)
  • Single Barrel, Cut In Double-Snap (1)
  • Single Barrel, Double-Snap (1)
  • Single Screw Strap Type (1)
  • Snap-In "U" Shaped, Strapped (1)
  • Snap-on (16)
  • Squeeze Connector (1)
  • Squeeze Connectors (7)
  • Squeeze type connector (10)
  • ST Series 45 DEG Liquidtight Connector With Plain Throat (3)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (8)
  • ST Series Straight Liquidtight Connector With Plain Throat (12)
  • STANDARD RADIUS (2)
  • STB Series Straight Liquidtight Connector With Insulated Throat (2)
  • STD ELBOW (6)
  • Steel Cord Grips (9)
  • STNM Series 90 DEG Liquidtight Connector (5)
  • STNM Series Straight Liquidtight Connector (6)
  • STRAIGHT (8)
  • Straight Conduit Connector (1)
  • Straight Liquid Tight Conduit Connector (1)
  • Straight Nonmetallic (1)
  • Straight Squeeze Connector (2)
  • Strain relief deluxe cord grip (1)
  • Strain relief dust tight grip (4)
  • SWEDGE RED. CPLG (3)
  • TAP, STANDARD BEAM, ANGLED FLANGE (1)
  • Taps (16)
  • THREADED (2)
  • Threaded Hubs (6)
  • Threadless Connector (10)
  • Three Cables to Rod or Tube (2)
  • Through Bulkhead Fitting (10)
  • Twist Rotating Head (1)
  • Type 4Q Liquid Tight 45 DEG Connector (1)
  • Type 4Q Liquid Tight 90 DEG Connector (1)
  • Type 4Q Liquid Tight Straight Connector (1)
  • Type SR Gold Seal Strain Relief Straight Connector (1)
  • U-Connector (5)
  • UF Connectors (1)
  • Watertight Hubs (9)
  • Wire Holder with Hanger (1)
  • Wiremesh Grips (5)
  • Wireway connector (6)
  • Wireway reducer (1)
  • Zinc Fitting (1)
  • Show More...