Narrow By:

• Category: Conduit Fittings & Accessories

• Product Type

  

  • 1 1/2 GRND Bush 105C Insul 4-14 Al Lug (1)
  • 1 1/2 Inch Ground Bushing Alu (1)
  • 1 1/2 Threaded Bushing Insulated (1)
  • 1 1/2 to 1 1/4 Al Reducing Bush (1)
  • 1 1/2 to 1 Al Reducing Bush (1)
  • 1 1/2 to 1/2 Al Reducing Bush (1)
  • 1 1/2 to 3/4 Al Reducing Bush (1)
  • 1 1/2" to 1" Reducer Steel (1)
  • 1 1/2" to 1/2" Reducer Steel (1)
  • 1 1/2" to 3/4" Reducer Steel (1)
  • 1 1/4 Inch Ground Bushing Alu (1)
  • 1 1/4 to 1 Al Reducing Bush (1)
  • 1 1/4 to 1/2 Al Reducing Bush (1)
  • 1 1/4 to 3/4 Al Reducing Bush (1)
  • 1 1/4" to 1" Reducer Steel (1)
  • 1 1/4" to 1/2" Reducer Steel (1)
  • 1 Conduit Bushed Nipples (1)
  • 1 GRND Bush 105C Insul 4 to 14 Al Lug (1)
  • 1 In Combo A&BB BSHG (1)
  • 1 In GNDG BSHG THD (1)
  • 1 In Inslg BSHG Male THRD (1)
  • 1 In Insul GNDG BSHG Alum (1)
  • 1 In Non-Metallic Split Bush, Box Of 25 (1)
  • 1 In Plastic Bushing, 150C (1)
  • 1 In SPLT GND BSH Lug 4-14 Awg, Box Of 25 (1)
  • 1 In THRD Inslg BSHG (1)
  • 1 Plastic Insul. Bushing (1)
  • 1 SS316 GRD BSHG (1)
  • 1 Threaded Bushing Insulated (1)
  • 1 Threaded Bushing Non Insulated (1)
  • 1 to 1/2 Al Reducing Bush (1)
  • 1 to 3/4 Al Reducing Bush (1)
  • 1 X 3/4 SS316 Face BSH (1)
  • 1" 1X1/2 Reduc Bushng STL NPS (1)
  • 1" 1X3/4 Reduc Bushng STL NPS (1)
  • 1" GRNDBSH STL THRD #14-4 Al Grndlug/Ins (1)
  • 1" to 1/2" Reducer Steel (1)
  • 1" to 1/2" Reducing Bushing Al (1)
  • 1" to 3/4" Reducer Steel (1)
  • 1" to 3/4" Reducing Bushing Al (1)
  • 1"GRD Bushg Lay-In Lug (1)
  • 1/2 In Inslg BSHG Male THRD (1)
  • 1/2 In THRD Inslg BSHG (1)
  • 1/2 Inch Ground Bushing Aluminum (1)
  • 1/2 Plastic Insul. Bushing (1)
  • 1/2 RGD SS Throat Bush Insul 4-14 Al Lug (1)
  • 1/2 to 3/8 Reducing Bush (1)
  • 1-1/2 In - 1/2 In Reducing Bushing, Box Of 10 (1)
  • 1-1/2 In GNDG BSHG THD (1)
  • 1-1/2 In Inslg BSHG Male THRD (1)
  • 1-1/2 In Insul GNDG BSHG Alum (1)
  • 1-1/2 In Non-Metallic Split Bush, Box Of 20 (1)
  • 1-1/2 In SPLT GND BSH #14-1/0AWG, Box Of 20 (1)
  • 1-1/2 In SPLT GND BSH #4-14 Awg, Box Of 20 (1)
  • 1-1/2 In THRD Inslg BSHG (1)
  • 1-1/2 X 1/2 RDC BSHG STL (1)
  • 1-1/2 X 3/4 RDC BSHG STL (1)
  • 1-1/2" 1-1/2X1 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X1/2 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X1-1/4 Reduc Bushng STL NPS (1)
  • 1-1/2" 1-1/2X3/4 Reduc Bushng STL NPS (1)
  • 1-1/2" GRND BSH STL THRD #14-4 Al Ins (1)
  • 1-1/2" NM Bushing (1)
  • 1-1/2" to 1" Reducing Bushing (1)
  • 1-1/2" to 1/2" Reducing Bushin (1)
  • 1-1/2" to 1-1/4" Reducing Bush (1)
  • 1-1/2" to 3/4" Reducing Bushing (1)
  • 1-1/2"GR.Bush.Lay-Inlg (1)
  • 1-1/4 In - 1/2 In Reducing Bushing, Box Of 20 (1)
  • 1-1/4 In Inslg BSHG Male THRD (1)
  • 1-1/4 In Insul GNDG BSHG Alum (1)
  • 1-1/4 In Non-Metallic Split Bush, Box Of 20 (1)
  • 1-1/4 In SPLT GND BSH #14-1/0AWG, Box Of 20 (1)
  • 1-1/4 In THRD Inslg BSHG (1)
  • 1-1/4 X 1/2 RDC BSHG STL (1)
  • 1-1/4" 1-1/4X1 Reduc Bushng STL NPS (1)
  • 1-1/4" 1-1/4X1/2 Reduc Bushng STL NPS (1)
  • 1-1/4" 1-1/4X3/4 Reduc Bushng STL NPS (1)
  • 1-1/4" GRND BSH STL THRD #14-4 Al Ins (1)
  • 1-1/4" NM Bushing (1)
  • 1-1/4" to 1" Reducing Bushing (1)
  • 1-1/4" to 3/4" Reducing Bushin (1)
  • 1-1/4"GR.Bush Lay-Inlg (1)
  • 1IN Bushing Pop-On Insul (1)
  • 1IN GRND Bush 14-2/0WIRE Range Al (1)
  • 2 1/2 Inch Ground Bushing Alu (1)
  • 2 1/2 to 1 1/2 Reducing Bush (1)
  • 2 1/2 to 1 1/4 Reducing Bush (1)
  • 2 1/2 to 1 Reducing Bush (1)
  • 2 1/2 to 2 Al Reducing Bush (1)
  • 2 GRND Bush 105C Insul 1 to 8 Copp Lug (1)
  • 2 GRND Bush 105C Insul 4 to 14 Al Lug (1)
  • 2 GRND. Bush. Ins. 14-1/0 Mall, Box Of 10 (1)
  • 2 In GNDG BSHG THD (1)
  • 2 In Inslg BSHG Male THRD (1)
  • 2 In Insul GNDG BSHG Alum (1)
  • 2 In Non-Metallic Split Bush, Box Of 10 (1)
  • 2 In Plastic Bushing 150 C (1)
  • 2 In SPLT GND BSH #4-14 Awg, Box Of 10 (1)
  • 2 In THRD Inslg BSHG (1)
  • 2 Inch Ground Bushing Alu (1)
  • 2 Threaded Bushing Insulated (1)
  • 2 to 1 1/2 Al Reducing Bush (1)
  • 2 to 1 1/4 Al Reducing Bush (1)
  • 2 to 1 Al Reducing Bush (1)
  • 2 to 1/2 Al Reducing Bush (1)
  • 2 to 3/4 Al Reducing Bush (1)
  • 2 X 1/2 RDC BSHG STL (1)
  • 2 X 1-1/2 SS316 Face BSH (1)
  • 2 X 3/4 RDC BSHG STL (1)
  • 2" 2X1 Reduc Bushng STL NPS (1)
  • 2" 2X1/2" Reduc Bushng STL NPS (1)
  • 2" 2X1-1/2" Reduc Bushng STL NPS (1)
  • 2" 2X1-1/4 Reduc Bushng STL NPS (1)
  • 2" GRD.Bush.Lay-In Lug (1)
  • 2" GRNDBSH STL THRD #14-4 Al Grndlug/Ins (1)
  • 2" Non-Insulated Threaded Bushing (1)
  • 2" to 1 1/2" Reducer Steel (1)
  • 2" to 1" Reducer Steel (1)
  • 2" to 1" Reducing Bushing Alum (1)
  • 2" to 1/2" Reducer Steel (1)
  • 2" to 1/2" Reducing Bushing Al (1)
  • 2" to 1-1/2" Reducing Bushing (1)
  • 2" to 1-1/4" Reducing Bushing (1)
  • 2" to 3/4" Reducing Bushing Al (1)
  • 2-1/2 GRND.Bush.Ins. 6-250, Box Of 25 (1)
  • 2-1/2 In Bushing Penny, Box Of 50 (1)
  • 2-1/2 In Combo A&BB BSHG (1)
  • 2-1/2 In Inslg BSHG Male THRD (1)
  • 2-1/2 In Non-Metallic Split Bush, Box Of 25 (1)
  • 2-1/2 In THRD Inslg BSHG (1)
  • 2-1/2 SPLT GND BSH W/LG 14-1/0, Box Of 25 (1)
  • 2-1/2" 2-1/2X1 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X1-1/2 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X1-1/4 Reduc Bushng STL NPS (1)
  • 2-1/2" 2-1/2X2 Reduc Bushng STL NPS (1)
  • 2-1/2" GRND BSH STL THRD #14-2/0 Al Ins (1)
  • 2-1/2"GR.Bush.Lay-Inlg (1)
  • 3 1/2 GRND Bush 105C Insul 3 to 6 Al Lug (1)
  • 3 1/2 GRND. Bush. Ins., Box Of 25 (1)
  • 3- 1/2 In - 3 In Reducing Bushing, Box Of 5 (1)
  • 3 1/2 to 2 1/2 Reducing Bush (2)
  • 3 1/2 to 3 Reducing Bush (1)
  • 3 Conduit Bushed Nipples (1)
  • 3 In Bushing Penny, Box Of 50 (1)
  • 3 In GRND. Bush. Ins. Zinc 6-250, Box Of 25 (1)
  • 3 In GRND.Bush.Ins.14-1/0 Mall, Box Of 25 (1)
  • 3 In Inslg BSHG Male THRD (1)
  • 3 In Non-Metallic Split Bush, Box Of 25 (1)
  • 3 In SPLT GND BSH #6-250MCM, Box Of 25 (1)
  • 3 In SPLT GND BSH W/Lug #14-1/0, Box Of 25 (1)
  • 3 In THRD Inslg BSHG (1)
  • 3 to 1 1/2 Al Reducing Bush (1)
  • 3 to 1 Al Reducing Bush (1)
  • 3 to 1 Reducing Bush (1)
  • 3 to 2 1/2 Al Reducing Bush (1)
  • 3 to 2 Al Reducing Bush (1)
  • 3" 3X1-1/2 Reduc Bushng STL NPS (1)
  • 3" 3X2 Reduc Bushng STL NPS (1)
  • 3" 3X2-1/2 Reduc Bushng STL NPS (1)
  • 3" GR.Bushg-Lay-In Lug (1)
  • 3" GRND BSH STL THRD #14-2/0 Al Ins (1)
  • 3" NM Bushing (1)
  • 3" to 1-1/2" Reducing Bushing (1)
  • 3" to 2" Reducing Bushing Alum (1)
  • 3/4 In Cond BSHG Irong (1)
  • 3/4 In Inslg BSHG Male THRD (1)
  • 3/4 In Insul GNDG BSHG Alum (1)
  • 3/4 In SPLT GND BSH Lug 4-14 Awg, Box Of 25 (1)
  • 3/4 In THRD Inslg BSHG (1)
  • 3/4" 3/4X1/2 Reduc Bushng STL NPS (1)
  • 3/4" GRND BSH STL THRD #14-4 Al Ins (1)
  • 3/4" to 1/2" Reducer Steel (1)
  • 3/4" to 1/2" Reducing Bushing (1)
  • 3/4"GRD Bush Lay-In LG (1)
  • 3/4IN Bushing Pop-On Insul (1)
  • 3/4IN GRND Bush 14-2/0WIRE Range Al (1)
  • 3-1/2 X 2" Reducing Bushings ( Malleable Iron ) (1)
  • 3-1/2" NM Bushing (1)
  • 3-1/2"3-1/2X2-1/2 Reduc Bushng STL NPS (1)
  • 3-1/2"3-1/2X3 Reduc Bushng STL NPS (1)
  • 3-1/2"GR.Bush.Lay-Inlg (1)
  • 3-1/2INCH Ground Bushing Alu (1)
  • 3IN GRND Bush 14-2/0WIRE Range Al (1)
  • 4 GRND Bush 105C Insul 3 to 6 Al Lug (1)
  • 4 In - 3-1/2 In Reducing Bushing, Box Of 5 (1)
  • 4 In Bushing Penny, Box Of 25 (1)
  • 4 In Inslg BSHG Male THRD (1)
  • 4 In Insul GNDG BSHG Alum (1)
  • 4 In Non-Metallic Split Bush, Box Of 20 (1)
  • 4 In THRD Inslg BSHG (1)
  • 4 to 2 1/2 Reducing Bush (1)
  • 4 to 2 Al Reducing Bush (1)
  • 4 to 2 Reducing Bush (1)
  • 4 to 3 1/2 Reducing Bush (1)
  • 4 to 3 Al Reducing Bush (1)
  • 4" 4X2-1/2 Reduc Bushng STL NPS (1)
  • 4" 4X3 Reduc Bushng STL NPS (1)
  • 4" 4X3-1/2 Reduc Bushng STL NPS (1)
  • 4" NM Bushing (1)
  • 4" Non-Insulated Threaded Bushing (1)
  • 4"GRD.Bushg-Lay-In Lug (1)
  • 4IN GRND Bush 14-2/0WIRE Range Al (1)
  • 5 GRND Bush 105C Insul 3 to 6 Al Lug (1)
  • 5 In Inslg BSHG Male THRD (1)
  • 5 In Plastic Bushing, Box Of 5 (1)
  • 5 In THRD Inslg BSHG (1)
  • 6 GRND Bush 105C Insul 3 to 6 Al Lug (1)
  • Anti-Short Bushing 1/2 (1)
  • Anti-Short Bushing 3/4 (1)
  • Anti-Short Bushing 5/16 (1)
  • Anti-Short Bushing 7/16 (1)
  • Bushing, 2IN Pop-On (Insul.) (1)
  • Emt Insulating Bushing (14)
  • Grounding Bushing (16)
  • Insulated Grounding Bushing (10)
  • Insulating Bushing (11)
  • Knockout Bushing (1)
  • Plastic Bushing (11)
  • Plastic Stud Bushing 1000 (1)
  • RDC Bush Alum 1 to 1/2 In NPT (1)
  • RDC Bush Alum 1-1/2TO1-1/4 In (1)
  • RDC Bush Alum 1-1/4TO3/4IN NPT (1)
  • RDC Bush Alum 2 to 1 In NPT (1)
  • RDC Bush Alum 2TO1-1/2 In NPT (1)
  • RDC Bush Mall 2-1/2TO1 In NPT (1)
  • RDC Bush Mall 2-1/2TO2 In NPT (1)
  • RDC Bush Mall 3 to 2 In NPT (1)
  • RDC Bush Mall 3-1/2TO2-1/2 In (1)
  • RDC Bush Mall 3TO2-1/2 In NPT (1)
  • RDC Bush Mall 4TO3 In NPT (1)
  • RDC Bush STL 1 to 3/4 In NPT (1)
  • RDC Bush STL 1/2TO3/8 In NPT (1)
  • RDC Bush STL 1-1/2TO1 In NPT (1)
  • RDC Bush STL 1-1/2TO1-1/4 In (1)
  • RDC Bush STL 1-1/4TO1 In NPT (1)
  • RDC Bush STL 1-1/4TO1/2 In NPT (1)
  • RDC Bush STL 1-1/4TO3/4 In NPT (1)
  • RDC Bush STL 2TO1/2 In NPT (1)
  • RDC Bush STL 2TO1-1/2 In NPT (1)
  • RDC Bush STL 2TO1-1/4 In NPT (1)
  • RDC Bush STL 3/4TO1/2 In NPT (1)
  • Reducer Bushing (10)
  • Reducing Bushing (40)
  • Rigid Conduit Capped Bushing (2)
  • Rigid Conduit Insulating Bushing (2)
  • Rigid Conduit Reducing Bushing (4)
  • Snap-In Bushing (6)
  • Universal Stud Bushing (1)
  • Universal Stud Bushing 500 (1)
  • Show More...

• Brand

  

  • Adalet-PLM (3)
  • American Fittings Corp (26)
  • Amfico (7)
  • Appleton (36)
  • ARLINGTON (20)
  • Arlington Industries (12)
  • Bridgeport (76)
  • Bridgeport Fittings (15)
  • CALBRITE (4)
  • Eaton (49)
  • EATON CROUSE-HINDS SERIES (31)
  • KILLARK (27)
  • LH DOTTIE (2)
  • O-Z/GEDNEY (28)
  • PLASTIBOND (17)
  • Southwire Rough Electrical Com (6)
  • T&B Ind Fitting (15)
  • Show More...

• Trade Size

  

  • 0.5 (1)
  • 0.75 (3)
  • 1 (10)
  • 1 in (2)
  • 1 INCH (2)
  • 1 to 1/2 in (2)
  • 1 to 3/4 in (2)
  • 1 x 3/4 in (1)
  • 1.25 (6)
  • 1.5 (7)
  • 1/2 (1)
  • 1/2 in (9)
  • 1/2 INCH (1)
  • -1/4 - 1/2 (1)
  • 1-1/2 (2)
  • 1-1/2 - 1/2 (1)
  • 1-1/2 in (2)
  • 1-1/2 INCH (2)
  • 1-1/2 to 1 in (2)
  • 1-1/2 to 1/2 in (1)
  • 1-1/2 to 1-1/4 in (2)
  • 1-1/2 to 3/4 in (2)
  • 1-1/4 (2)
  • 1-1/4 in (2)
  • 1-1/4 to 1 in (2)
  • 1-1/4 to 1/2 in (1)
  • 1-1/4 to 3/4 in (2)
  • 2 (8)
  • 2 in (4)
  • 2 INCH (3)
  • 2 to 1 in (2)
  • 2 to 1/2 in (1)
  • 2 to 1-1/2 in (2)
  • 2 to 1-1/4 in (2)
  • 2 to 3/4 in (2)
  • 2 x 4 Stud Size (1)
  • 2.5 (8)
  • 2-1/2 (1)
  • 2-1/2 IN (3)
  • 2-1/2 to 2 in (2)
  • 3 (11)
  • 3 1/2 - 3 (1)
  • 3 in (2)
  • 3 INCH (1)
  • 3 to 1-1/2 in (1)
  • 3 to 1-1/4 in (1)
  • 3 to 2 in (1)
  • 3 to 2-1/2 in (2)
  • 3 to 4 in (1)
  • 3.5 (2)
  • 3/4 (1)
  • 3/4 in (8)
  • 3/4 INCH (2)
  • 3/4 to 1/2 in (2)
  • 3-1/2 (1)
  • 3-1/2 in (2)
  • 3-1/2 INCH (2)
  • 3-1/2 to 3 in (1)
  • 4 (8)
  • 4 - 3-1/2 (1)
  • 4 in (1)
  • 5 (1)
  • 5/16 (1)
  • 7/16 (1)
  • Large End: 3/4 in;Small End: 1/2 in (1)
  • Show More...

• Model

  

  • GLL (9)
  • METERING CABINET, FORMED STEEL MATERIAL; ANSI/ASA 61 GRAY COLOR; 30 INCH; 30 WIDTH IN INCH; 30 INCH; 30 HEIGHT IN INCH; 10 INCH; 10 DEPTH IN INCH; 762 HEIGHT IN MM; 762 WIDTH IN MM; CSA APPROVAL; 254 DEPTH IN MM; INDOOR METERING APPLICATION (1)
  • PBGLL (5)
  • PET (1)
  • RB (2)
  • RE (29)
  • Show More...

• Connection Type

  

  • NPT (1)
  • Rigid (8)
  • Snap-In (7)
  • Threaded (27)
  • Show More...

• Hub Size

  

  • 1" to 1/2" (1)
  • 1" to 3/4" (1)
  • 1-1/2" to 1" (1)
  • 1-1/2" to 1/2" (1)
  • 1-1/2" to 3/4" (1)
  • 1-1/4" to 1" (1)
  • 1-1/4" to 1/2" (1)
  • 2" to 1" (1)
  • 2" to 1/2" (1)
  • 2" to 1-1/2" (1)
  • 3/4" to 1/2" (2)
  • Show More...

• Length

  

  • 0.505 in (5)
  • 0.558 in (1)
  • 0.563 in (1)
  • 0.652 (1)
  • 0.74 in (1)
  • 0.743 in (1)
  • 0.84 (2)
  • 0.945 in (1)
  • 1 (6)
  • 1.02 (1)
  • 1.05 (1)
  • 1.05 in (2)
  • 1.056 (1)
  • 1.13 in (1)
  • 1.240 in (1)
  • 1.25 (1)
  • 1.278 (1)
  • 1.29 in (1)
  • 1.32 (2)
  • 1.440 in (1)
  • 1.64 (1)
  • 1.66 in (2)
  • 1.77 (1)
  • 1.870 in (1)
  • 1.9 in (4)
  • 1.915 (1)
  • 2.109 (1)
  • 2.240 in (1)
  • 2.327 (1)
  • 2.375 in (5)
  • 2.38 (3)
  • 2.384 (1)
  • 2.725 in (1)
  • 2.734 (1)
  • 2.875 in (1)
  • 3.065 (1)
  • 3.13 (1)
  • 3.340 in (1)
  • 3.5 in (4)
  • 3.604 (1)
  • 3.695 (1)
  • 3.765 in (1)
  • 4.311 (1)
  • 4.5 in (1)
  • 4.652 (1)
  • 4.81 (1)
  • 4.812 (1)
  • 5.751 (2)
  • 5.783 (1)
  • 6.282 (1)
  • Show More...

• Width

  

  • 0.525 in (1)
  • 0.537 in (1)
  • 0.61 in (1)
  • 0.625 in (2)
  • 0.635 in (1)
  • 0.84 in (1)
  • 0.953 in (1)
  • 1 in (1)
  • 1.05 (1)
  • 1.056 in (1)
  • 1.140 in (1)
  • 1.205 in (1)
  • 1.21 in (1)
  • 1.218 in (1)
  • 1.23 in (1)
  • 1.24 in (1)
  • 1.278 in (1)
  • 1.32 (2)
  • 1.420 in (1)
  • 1.468 in (1)
  • 1.770 in (1)
  • 1.875 in (1)
  • 1/2 in (2)
  • 11/16 in (1)
  • 1-1/4 in (1)
  • 1-15/16 in (1)
  • 13/16 in (4)
  • 1-9/16 in (1)
  • 2 (6)
  • 2.125 in (1)
  • 2.281 in (1)
  • 2.327 in (1)
  • 2.38 (3)
  • 2.5 in (1)
  • 2.598 in (1)
  • 2.656 in (1)
  • 2.75 (1)
  • 2.919 in (1)
  • 2-11/16 in (1)
  • 2-3/16 in (1)
  • 3.065 in (1)
  • 3/8 in (1)
  • 3-1/8 in (1)
  • 3-13/16 in (1)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 7/16 in (1)
  • 9/16 in (1)
  • Show More...

• Thread Length

  

  • 1/2 in (6)
  • 1-1/8 in (2)
  • 5/8 in (5)
  • 7/16 in (2)
  • Show More...

• Height

  

  • 0.37 in;9.4 mm (1)
  • 0.4 (1)
  • 0.453 in (5)
  • 0.505 (1)
  • 0.52 (1)
  • 0.52 Inch (1)
  • 0.531 (1)
  • 0.56 INCH (1)
  • 0.568 (1)
  • 0.59 Inch (1)
  • 0.605 (1)
  • 0.614 (1)
  • 0.625 (1)
  • 0.627 (1)
  • 0.63 (1)
  • 0.675 (1)
  • 0.688 in (2)
  • 0.718 in (1)
  • 0.75 in (1)
  • 0.81 (3)
  • 0.813 in (2)
  • 0.815 (1)
  • 0.82 (1)
  • 0.83 (1)
  • 0.85 Inch (1)
  • 0.875 in (1)
  • 0.99 (1)
  • 1 in (2)
  • 1.03 (1)
  • 1.140 in (1)
  • 1.23 (3)
  • 1.24 (1)
  • 1.27 in;32.3 mm (1)
  • 1.42 in (1)
  • 1.770 in (1)
  • 1/2 in (4)
  • 1-1/16 INCH (2)
  • 1-3/8 in (2)
  • 2 (6)
  • 2.281 in (1)
  • 2.598 in (1)
  • 2.919 in (1)
  • 3/4 in (9)
  • 3/8 in (2)
  • 5.751 in (1)
  • 5/8 in (2)
  • 6.9 in (1)
  • 7/8 in (5)
  • 9/16 in (1)
  • Show More...

• Cable Size

  

  • #14 to 1/0 AWG (7)
  • #14 to 4 AWG (9)
  • #6 to 3/0 AWG (1)
  • #8 to 1/0 AWG (2)
  • Show More...

• Diameter

  

  • 0.70 in;17.8 mm (1)
  • 1 in (2)
  • 1 in (Inside);1-1/2 in (Outside) (1)
  • 1 in (Inside);1-11/16 in (Outside) (1)
  • 1 in (Inside);2-3/16 in (Outside) (1)
  • 1.03 in;26.2 mm (1)
  • 1.063 in (1)
  • 1.25 in (1)
  • 1.4 in (1)
  • 1.625 in (1)
  • 1-1/16 in (1)
  • 1-1/2 in (1)
  • 1-1/4 in (1)
  • 1-15/16 in (1)
  • 1-15/16 in (Inside);2-7/8 in (Outside) (1)
  • 1-3/16 in (1)
  • 13/16 in (Inside);1-1/2 in (Outside) (1)
  • 13/16 in (Inside);1-1/8 in (Outside) (1)
  • 13/16 in (Inside);1-11/16 in (Outside) (1)
  • 13/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-5/16 in (1)
  • 1-5/16 in (Inside);1-11/16 in (Outside) (1)
  • 1-5/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-7/8 in (2)
  • 1-9/16 in (2)
  • 1-9/16 in (Inside);2-3/16 in (Outside) (1)
  • 2 in (1)
  • 2.093 Inch (1)
  • 2.18 INCH (1)
  • 2.313 in (1)
  • 2.68 Inch (1)
  • 2.75 in (1)
  • 2-1/8 in (2)
  • 2-11/16 in (1)
  • 2-3/16 in (1)
  • 2-5/16 in (Inside);3-1/2 in (Outside) (1)
  • 2-5/8 in (2)
  • 3.313 in (1)
  • 3.855 Inch (1)
  • 3/8 in (1)
  • 3-1/8 in (1)
  • 3-13/16 in (1)
  • 3-3/16 in (2)
  • 4 in (1)
  • 4-13/16 in (2)
  • 4-3/8 INCH (2)
  • 4-5/16 in (2)
  • 5/8 in (Inside);1-1/8 in (Outside) (1)
  • 5/8 in (Inside);2-3/16 in (Outside) (1)
  • 5/8 in (Inside);7/8 in (Outside) (1)
  • Show More...

• For Use With

  

  • Electrical;Telecommunications Cable (6)
  • EMT and Rigid Conduits (1)
  • EMT Conduit (14)
  • Knockout (5)
  • Locknut;Box or Connector (10)
  • Punched Panel Holes;Knockout (1)
  • Rigid and IMC Conduit (18)
  • Rigid Conduit;IMC Conduit (2)
  • Rigid/Imc Conduit (1)
  • Rigid/IMC Conduit;Solar and other Outdoor Installations (1)
  • Terminate Service Conduit to Cabinet (10)
  • Threaded Heavy Wall Conduit (21)
  • Threaded Heavy Wall Conduit Systems (1)
  • Threaded Rigid/IMC Conduit to Provide a Means of Grounding Conduit Through (9)
  • Show More...

• Special Features

  

  • 1.03 IN Dia X 0.37 IN Thick, For Threaded Conduit/Connector (1)
  • 1.62 IN Dia X 0.71 IN Length, For Rigid Conduit And IMC (1)
  • 1.75IN Width X 0.4IN Depth (1)
  • Allows easy insertion of grounding conductor for through or end connection;Copper conductor only for #14-4 lug;Low grounding connector profile;Lugs not sold separately;O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing;Phenolic insulation, with 150 DEG C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures;Protects insulated conductors from abrasion during pulling and mechan (4)
  • Allows easy insertion of grounding conductor for through or end connection;Low grounding connector profile;Lugs not sold separately;O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing;Phenolic insulation, with 150 DEG C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures;Protects insulated conductors from abrasion during pulling and mechanical vibration;Provides voltage grad (1)
  • Black Color, rated 150 degree C. (9)
  • Can be used with a locknut to terminate conduit at an enclosure;Fasten and ground threaded rigid, IMC metal conduit to an enclosure, copper or aluminum conductors;Insulating liner material is self-extinguishing;Lug used to connect bonding jumper to a neutral bus bar;Lugs not sold separately;Provides a compact means of grounding conduit through an insulated bushing;The plastic liner is tough, It resists corrosion, chemicals and temperature extremes, surface friction is so low that wires can be pulled with v (3)
  • Corrosion Resistant (9)
  • Dual rated CU-AL C-clamp grounding lug (8)
  • Explosionproof;Dust Ignitionproof (3)
  • Features: High Strength, Used with Rigid/IMC Conduit (1)
  • Features: Reusable (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 1-1/2 x 1-1/2 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 1-1/2 x 3/4 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 2 x 1/2 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 2 x 3/4 IN (1)
  • For Rigid and IMC Conduit (19)
  • Grounding Bushings & Accessories (2)
  • Grounding Lug Wire Capacity # 14 - #4 (5)
  • Grounding Lug Wire Capacity # 4 - #1/0 (3)
  • Grounding Lug Wire Capacity # 6 - #250 (1)
  • Grounding Lug Wire Capacity # 6 - 250 MCM (1)
  • Grounding Lug Wire Capacity #14 - #1/0 (2)
  • Grounding Lug Wire Capacity #14 - #1/0;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (7)
  • Grounding Lug Wire Capacity #14 - #4;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (3)
  • Grounding Lug Wire Capacity #6 - #250 MCM (4)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC (20)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC;Type ABB is a combination of type A and BB bushings for insulating cables passing through metal boxes or troughs (2)
  • Insulated Bushing (10)
  • Integral Bushing Which Prevents Damage to Wires;Full, Clean Cut Tapered Threads (21)
  • Killark’s reducing bushings and adapters assist in reducing the trade size of tapped holes and its smooth internal bushing protects conductors. The wide variety of reducing ranges allow for almost any combination of size changes. It is available in copper-free aluminum and zinc plated steel. (12)
  • Knockout Bushing (6)
  • Non-grounding;Provides a smooth pulling surface (1)
  • Press Fit Holds Firmly in Place when Pulling Cable (9)
  • Reducing fitting (15)
  • Rounded Surface of Bushing (10)
  • Rounded surface of bushing prevents damage to wire insulation (1)
  • Smooth rounded integral bushing protects conductor insulation (22)
  • Smooth Rounded Integral Bushing Protects Conductor Insulation;Full Machine Tapered Threads (NPT) (1)
  • Threaded Flush Mount (1)
  • Weight 13 Lb per 100 (1)
  • Weight 19 Lb per 100 (1)
  • Weight 22 Lb per 100 (2)
  • Weight 7 Lb per 100 (2)
  • Weight 92 Lb per 100 (1)
  • Weight 95 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 12 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 24 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 26 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 5 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 100 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 110 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 140 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 160 Lb per 100 (1)
  • With 8 To 1/0 AWG Copper Lug for Copper Grounding Conductor, Weight 40 Lb per 100 (1)
  • With dual rated CU-AL C-clamp grounding lug (1)
  • Show More...

• Application

  

  • 2 X 4 in Metal Stud (2)
  • aluminum alloy 60610-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (1)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (2)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (4)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (1)
  • aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (26)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • Electrical (1)
  • For AC - MCI-A - HCF steel and aluminum cable (4)
  • For EMT And Rigid Conduits (3)
  • For EMT Conduit (6)
  • For Reducing Conduit Entries To A Smaller Size In Threaded Rigid And IMC Conduit Systems (22)
  • For Service Entrance Cable (6)
  • For Threaded Rigid Conduit And IMC (27)
  • For Use With Locknut To Terminate Rigid Metal Conduit Or IMC To A Box Or Enclosure (1)
  • For use with rigid/IMC conduit (12)
  • For Use With Threaded Rigid Metal Conduit and IMC (3)
  • Hazardous Location (3)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (15)
  • New work and Retrofit (1)
  • Provides a Well Rounded Insulating Surface Over Which Conductors May Be Pulled or on Which Conductors May Bear While In Service (3)
  • RB Reducing Bushings are Designed to Reduce Conduit Entriesto a Smaller Size and are Used in Threaded Rigid and IMC Conduit Systems (1)
  • Reduce The Size of Internal Female Threads. 1/2" Thru 2" Steel, 2 1/2" Thru 4" Malleable Iron (15)
  • Rigid/IMC/PVC Conduit (1)
  • Telephone;Computer;Single or Multiple Voice Cables;Video or Data Cables (10)
  • Threaded Heavy Wall Conduit Systems (21)
  • To reduce the trade size of a taped hole or hub. (12)
  • To Reduce the trade size of a tapered entry (6)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed. Patented (4)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed (3)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used inside bushing to prevent foreign matter from entering conduit Galvanized steel. (2)
  • Used inside bushing to prevent foreign matter from entering conduit. Galvanized steel. (1)
  • Used to reduce the size of internal female threads. 1/2" thru 2" steel, 2 1/2" thru 4" malleable iron. (4)
  • Used With Locknut to Terminate Service Conduit to Cabinet (10)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. (2)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. Grounding lug; aluminum alloy 6061-T6. Plastic metaliner prevents damage to wire insulation. Rated 150 degree C. (4)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. (9)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (11)
  • Show More...

• Package Quantity

  

  • 1 PK (1)
  • 10 PK (3)
  • 10 PK;1 CT (21)
  • 100 PK;1 CT (10)
  • 100 PK;10 CT (1)
  • 100 PK;25 CT (1)
  • 1000 PK;100 CT (6)
  • 15 PK;1 CT (1)
  • 2 PK;1 CT (5)
  • 20 PK;1 CT (6)
  • 200 PK;20 CT (1)
  • 200 PK;50 CT (2)
  • 25 CT (5)
  • 25 PK (1)
  • 25 PK;1 CT (12)
  • 25 PK;5 CT (1)
  • 250 PK;25 CT (4)
  • 5 PK (1)
  • 5 PK;1 CT (3)
  • 50 CT (1)
  • 50 PK (3)
  • 50 PK;1 CT (9)
  • 50 PK;10 CT (1)
  • 500 PK;50 CT (3)
  • Show More...

• Weight

  

  • 0.004 lb/EA (3)
  • 0.005 lb/EA (1)
  • 0.0054 lb/EA (1)
  • 0.0068 lb/EA (1)
  • 0.0071 lb/EA (1)
  • 0.008 lb/EA (2)
  • 0.01 lb/EA (3)
  • 0.0100 lb/EA (1)
  • 0.0108 lb/EA (1)
  • 0.012 lb/EA (1)
  • 0.014 lb/EA (1)
  • 0.015 lb/EA (1)
  • 0.016 lb/EA (1)
  • 0.0167 lb/EA (1)
  • 0.018 lb/EA (1)
  • 0.0183 lb/EA (1)
  • 0.0196 lb/EA (1)
  • 0.02 lb/EA (1)
  • 0.0282 lb/EA (1)
  • 0.03 lb/EA (1)
  • 0.0396 lb (1)
  • 0.04 lb/EA (2)
  • 0.045 lb/EA (1)
  • 0.0475 lb/EA (1)
  • 0.0692 lb (1)
  • 0.07 lb (1)
  • 0.07 lb/EA (1)
  • 0.075 lb/EA (1)
  • 0.0839 lb/EA (1)
  • 0.094 lb/EA (1)
  • 0.1 lb/EA (1)
  • 0.1200 lb (1)
  • 0.1240 lb (1)
  • 0.1320 lb (1)
  • 0.18 lb/EA (1)
  • 0.19 lb/EA (1)
  • 0.2190 lb (1)
  • 0.22 lb/EA (1)
  • 0.2700 lb (1)
  • 0.29 lb/EA (1)
  • 0.3300 lb (1)
  • 0.35 lb/EA (1)
  • 0.3580 lb (1)
  • 0.38 (1)
  • 0.42 lb/EA (1)
  • 0.430 lb/EA (1)
  • 0.47 lb/EA (1)
  • 0.4840 lb (1)
  • 0.4920 lb (1)
  • 0.55 lb/EA (1)
  • 0.57 lb/EA (1)
  • 0.64 lb/EA (1)
  • 0.6580 lb (1)
  • 0.69 lb/EA (1)
  • 0.73 lb/EA (1)
  • 0.7600 lb (1)
  • 0.8260 lb (1)
  • 0.85 lb/EA (1)
  • 0.9 lb/EA (1)
  • 1 lb/EA (1)
  • 1.20 lb/EA (1)
  • 1.3 lb (1)
  • 1.3 lb/EA (1)
  • 1.68 lb/EA (2)
  • 11.0 lb (2)
  • 110 lb/100 (1)
  • 12 lb/100 (1)
  • 12.0 lb (1)
  • 19 lb/100 (1)
  • 2.1 lb/EA (1)
  • 2.48 lb/EA (1)
  • 24 lb/100 (1)
  • 26 lb/100 (1)
  • 5 lb/100 (1)
  • 53 lb/100 (1)
  • 70 lb/100 (1)
  • 9 lb/100 (1)
  • 9.0 lb (1)
  • 92.00 lb pe 100 Pieces;41.7 kg per 100 Pieces (1)
  • Show More...

• Category Description

  

  • ALL PLASTIBOND FITTINGS (4)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (90)
  • DIECAST EMT FITTINGS (1)
  • DIECAST OFFSET & CHASE NIPPLES (2)
  • FORM 5 CONDULETS, COVERS, & GASKETS (1)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (1)
  • Fuses & Fuse Accessories (8)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (214)
  • PVC ELBOWS (4)
  • PVC SPACERS (31)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (13)
  • STEEL EMT FITTINGS (2)
  • Show More...

• Color

  

  • Black (43)
  • Blue (3)
  • Gray (30)
  • Grey with Black Insulator (26)
  • Polished Silver (1)
  • Red (6)
  • Silver (1)
  • White (20)
  • Yellow (1)
  • Show More...

• Finish

  

  • #4 Polished Finish (1)
  • Ball burnish (24)
  • Electro Zinc Plated (22)
  • Electrogalvanized With Aluminum Acrylic Painted (2)
  • Galvanized (2)
  • Natural (13)
  • NO FINISH (37)
  • Untreated (1)
  • Zinc Electroplated (21)
  • Zinc Plated (21)
  • Show More...

• Temperature Rating

  

  • 105 DEG C (26)
  • 105 Degree C (7)
  • 105?°C (17)
  • 150 DEG C (2)
  • 150?° (9)
  • 150?°C (17)
  • 90?°C (10)
  • Show More...

• Material

  

  • 0.002 Inch Red Urethane Ferrous Metal Interior, 0.04 Inch Gray PVC Coated Ferrous Metal Exterior (2)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior/Exterior (4)
  • 2 Mil Red Urethane Coated Interior/Exterior Ferrous Metal (2)
  • 2 MIL Red Urethane Ferrous Metal Interior, 40 MIL Gray PVC Ferrous Metal Exterior (5)
  • Aluminum (17)
  • Copper-Free Aluminum (14)
  • Copper-Free Aluminum Body, Stainless Steel Screws (5)
  • Die-Cast Zinc Body, Steel Cap (2)
  • FERALOY IRON ALLOY (2)
  • MACHINED PAPER LAMINATED PHENOLIC (2)
  • Malleable Iron (16)
  • Malleable Iron Body, Plastic Throat Liner (21)
  • Non-Metallic (2)
  • Nylon (1)
  • Nylon Plastic (7)
  • Phenolic (22)
  • Plastic (59)
  • Polypropylene (PP) (1)
  • POLYURETHANE COATED FERROUS (4)
  • Stainless Steel - 316 (1)
  • Steel (42)
  • Thermoplastic (4)
  • Zinc Alloy (10)
  • Zinc Die Cast (14)
  • Show More...

• Type

  

  • 1-Hole Aluminum Strap (6)
  • Anti Short Bushing (4)
  • BUSHING (82)
  • Bushings (1)
  • Conduit bushed (chase) nipple (2)
  • Conduit Bushing (1)
  • Grounding bushing (18)
  • Grounding Bushings & Accessories (10)
  • Insulated Bushing (4)
  • Insulated Grounding Bushing With Aluminum Lay-In-Lug (3)
  • Insulating Bushing (11)
  • Knockout Bushing (1)
  • Non Metallic Bushing (1)
  • Push-In Connector (2)
  • REDUCER (17)
  • Reducing Bushing (42)
  • Reducing Flush Bushing (2)
  • SPLIT (10)
  • THREADED (13)
  • Threaded Bushing (9)
  • THREADED FEMALE (2)
  • Threaded Female, Capped (2)
  • Throat bushing (6)
  • Type A Non-Grounding Insulating Bushing (10)
  • Type ABB Insulating Bushing (2)
  • Type ABLG Insulated Grounding Bushing (5)
  • Type BB Non-Grounding Insulating Bushing (10)
  • Show More...

• Used On

  

  • IMC/RIGID CONDUIT (2)
  • RIGID CONDUIT (6)
  • RIGID METAL CONDUIT (6)
  • Threaded PVC Coated Rigid Conduit (5)
  • Show More...

• Size

  

  • 1 (12)
  • 1 - 1/2 (1)
  • 1 - 3/4 (1)
  • 1 in (5)
  • 1 X 0.75 (1)
  • 1 X 1/2 (1)
  • 1 X 3/4 (2)
  • 1.25 X 0.5 (1)
  • 1/2 (7)
  • 1/2 in (2)
  • 1/2 INCH (2)
  • 1/2 To 3/8 In (1)
  • 1/2 X 3/8 (1)
  • 1-1/2 (12)
  • 1-1/2 - 1 (1)
  • 1-1/2 - 1/2 (1)
  • 1-1/2 - 1-1/4 (1)
  • 1-1/2 - 3/4 (1)
  • 1-1/2 3/4 (1)
  • 1-1/2 in (3)
  • 1-1/2 INCH (1)
  • 1-1/2 X 1 (1)
  • 1-1/2 x 1-1/4 (2)
  • 1-1/4 (9)
  • 1-1/4 - 1 (1)
  • 1-1/4 - 1/2 (1)
  • 1-1/4 - 3/4 (1)
  • 1-1/4 in (1)
  • 1-1/4 INCH (1)
  • 1-1/4 X 1 (1)
  • 1-1/4 X 1/2 (1)
  • 1-1/4 X 3/4 (2)
  • 1-2/2 x 1/2 (1)
  • 1-Inch (3)
  • 2 (13)
  • 2 - 1 (1)
  • 2 - 1/2 (1)
  • 2 - 1-1/2 (1)
  • 2 - 1-1/4 (1)
  • 2 - 3/4 (1)
  • 2 1/2 (1)
  • 2 1/2 Inch (1)
  • 2 in (5)
  • 2 INCH (2)
  • 2 X 1 (1)
  • 2 x 1/2 (2)
  • 2 X 1-1/2 (2)
  • 2 X 1-1/4 (1)
  • 2 x 3/4 (1)
  • 2-1/2 (11)
  • 2-1/2 - 2 (1)
  • 2-1/2 in (1)
  • 2-1/2 X 1 (1)
  • 2-1/2 X 2 (1)
  • 3 (12)
  • 3 - 2-1/2 (1)
  • 3 in (2)
  • 3 INCH (1)
  • 3 x 2 (1)
  • 3 X 2-1/2 (1)
  • 3/4 (10)
  • 3/4 - 1/2 (1)
  • 3/4 in (1)
  • 3/4 INCH (2)
  • 3/4 X 1/2 (2)
  • 3-1/2 (4)
  • 3-1/2 - 3 (1)
  • 3-1/2 in (1)
  • 3-1/2 Inch (1)
  • 3-1/2 x 2 (1)
  • 3-1/2 X 2-1/2 (1)
  • 3-1/2 X 3 (1)
  • 4 (11)
  • 4 - 3-1/2 (1)
  • 4 in (3)
  • 4 INCH (1)
  • 4 To 3-1/2 In (1)
  • 4 x 3 (1)
  • 5 (3)
  • 5 in (1)
  • 6 In (1)
  • L(2.109) x W(1.333) x H(1.070) (1)
  • L(2.384) x W(1.607) x H(1.070) (1)
  • L(2.734) x W(1.944) x H(1.496) (1)
  • L(3.130) x W(2.184) x H(1.385) (1)
  • L(3.604) x W(2.665) x H(1.385) (1)
  • L(4.652) x W(3.425) x H(1.735) (1)
  • L(4.810) x W(4.022) x H(1.790) (1)
  • L(5.783) x W(4.545) x H(1.741) (1)
  • L(6.282) x W(5.040) x H(1.725) (1)
  • Show More...