The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Electric Ivory.

The NNC37X37WH2 Halogen-Free Wide Slot Wiring Duct is used to route, protect, and manage wires near sensitive electronic equipment and in environments where heat resistance or public safety is a concern. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 95°C (203°F). Halogen-Free, Polyphenylene Oxide (PPO). Mounting holes provided. 1.41" x 1.46" (35.8 mm x 37.1 mm) and 6.6' (2 m) long. Cover included. Color White. 5 pieces per package.

The T-45 Divider Wall is designed to maintain separation of cables within the raceway. It is 8 ft.

The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 8 ft and White

The T-70 Mounting Bracket, Screw-On, for T-70, PVC, International Gray, 0.05'

The end cap fitting is used to terminate or allow entry to T-70 raceway with conduit breakouts of 1/2". It is White.

The entrance end fitting is for use with T-70 Raceway. The color is WHITE

The inside corner fitting is used to join sections of T-70 raceway at inside corners while maintaining proper separation of data and power. It is White.

The snap-on transition fitting is for use with LD, LDPH, T-70 and T45 raceways. It is Electric Ivory.

The T-70 snap-on tee fitting extends cable runs in a tee configuration. It is white.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH10 raceway. It is white.

Eaton B-Line series runway to rack support kit, Used to secure cable runway to top angles of rack,Mounting plate,Includes plate, J bolts and hardware,3" upright network equipment rack top plate runway support kit, yellow zinc

HellermannTyton surface raceway systems are the ideal solution for routing communication and power cables. No need to break into existing walls - raceway systems are designed to route cable along wall surfaces. Made of a PVC material, components are durable and affordable; and the one-piece construction and adhesive tape backing make positioning and mounting easy. HellermannTyton offers a low voltage TSR system and a power rated TSRP system that are available in three different diameters to accommodate dif

Surface Raceway, Ivory, PVC Material, 6 ft Length, 3/4 in Width, 1/2 in Height, Tamper Resistant

Surface Raceway, Ivory, PVC Material, 8 ft Length, 3/4 in Width, 1/2 in Height, Tamper Resistant

HellermannTyton surface raceway systems are the ideal solution for routing communication and power cables. No need to break into existing walls - raceway systems are designed to route cable along wall surfaces. Made of a PVC material, components are durable and affordable; and the one-piece construction and adhesive tape backing make positioning and mounting easy. HellermannTyton offers a low voltage TSR system and a power rated TSRP system that are available in three different diameters to accommodate dif

HellermannTyton surface raceway systems are the ideal solution for routing communication and power cables. No need to break into existing walls - raceway systems are designed to route cable along wall surfaces. Made of a PVC material, components are durable and affordable; and the one-piece construction and adhesive tape backing make positioning and mounting easy. HellermannTyton offers a low voltage TSR system and a power rated TSRP system that are available in three different diameters to accommodate dif

HellermannTyton surface raceway systems are the ideal solution for routing communication and power cables. No need to break into existing walls - raceway systems are designed to route cable along wall surfaces. Made of a PVC material, components are durable and affordable; and the one-piece construction and adhesive tape backing make positioning and mounting easy. HellermannTyton offers a low voltage TSR system and a power rated TSRP system that are available in three different diameters to accommodate dif